Unity upgrade

Going to do a Unity upgrade and have new server. Current running is 4.0(4). Going to 4.2.
Would like to do DIRT and blow it away and build on new server with same name and ip and such.
Is it possible just do do the resture and away we go or is this not possible?
Any suggestions are welcome.
Thanks,
Paul.

Yes, it can be done, just remember that you need to restore in the exact same version as the backup (including ES if you have), so you have two options:
1) Upgrade your current server to 4.2, backup the server. Install 4.2 in the new server and restore.
2) Backup your server, install 4.0(4) in the new server, restore and then upgrade to 4.2
For future posts, Unity questions should go to the Unified Communications forum.
HTH
//Jorge

Similar Messages

Unity Upgrade - 4.0(5) to 7.0 Cobras and GSM - Internet Subscriber

I am upgrading from Unity 4.0(5) to 7.0. I have the old and new Unity servers in the same AD domain. I ran cobras export, then migrated all users to the new Unity server using GSM. GSM doesn't appear to move Internet Subscribers and neither does cobras. I tried adding an Internet subscriber to the new Unity server and got the error "this extension is in use by subscriber XYZ". I deleted the Internet subscriber from the old Unity and tried adding it to the new server and received the new error. At this point the subscriber does not appear in either Unity server. I have deleted the associate contact from AD and still can not add it to the new system.
dbwalker is clean. How can I correct this problem?

Hi William,
Cobras has it limitation when it comes to internet subscriber -
noted in the link : Internet subscribers, Bridge, AMIS, SMTP users and such will not be included.
http://www.ciscounitytools.com/Applications/General/COBRAS/Help/COBRAS.htm
You might try using Subscriber Information Dump under tools depot > administration tools > Subscriber Information Dump and export and import to the new unity server.
Rick Mai

Unity Upgrade License Question

I am upgrading Unity 4.05 to Unity 7.0x and changing out server hardware.
I have a new license key file with the NEW servers MAC address.
I am going to upgrade the old server from 4.05 to 7.01 then dirt backup and dirt restore to the new 7.01 unity server with the new license.
Do I need to get a temp license for the old server mac address in order to convert it from Unity 4.05 to 7.0 just to dirt backup?

If you are just using it for DIRT, then its no problem.
However... I would probably do the following:
Install Unity 4.05 on the new server
DIRT Export the old server
DIRT import to the new server
In place upgrade to 7.x
This way, if you have any problems, your production server is still running and easy rollback plan. If you upgrade your production and something happens... you cant rollback. (could if you pull a drive)
Unity will still start and run, but the Subscribers or ports will not register when the license is not there. Which is fine for DIRT, it does not care. Its only accessing the database to pull out what it needs. (everything)
Be prepared for licensing issues. They have been extremely slow lately

Unity upgrade/rebuild

hi everyone
I have to upgrade unity 4.2 to 5.x over the weekend, Im wondering is it more straightforward to just rebuild it, keeping old messages is not important so I figured maybe a clean build would be easier?? Im not familiar with the process though so just wanted to check which was best option
Also Im going to take the server off site to rebuild and then bring back to site when finished, i will be rebuilding with same ip address etc but wondered is there any important information I need before rebuilding or should it straight forward to get the newly rebuilt server working with the original callmanager again??
thanks

Pretty much, if the stuff COBRAS does not backup is not something you really need, you can use the tool.
Otherwise it would mean building the new server with exact same version for DIRT restore and the upgrade.
All this is from the help file
Usage Scenarios
This is not a comprehensive list of uses but is intended to demonstrate the targeted uses of COBRAS in the field.
Straight backup and restore
COBRAS can be used for simply backing up all subscribers, call handlers, schedules, distribution lists, interviewers and routing rules and restoring them to a clean install of Unity or Connection after a failure. For just plain backup and restore scenarios where the version of Unity is not changing, however, DiRT (for Unity or for Connection 1.x) or DRS (for Connection 2.x and later) is the better tool since it’s faster and includes data COBRAS does not such as COS objects, name lookup handlers and holiday information. See the Data Not Backed Up section for more details on what’s not included with COBRAS backups.
Restore onto a different version or product (migration)
COBRAS is unique in that it can take backed up data from a Unity 4.0(5) and restore it to a Unity 4.0(5) or later system. COBRAS can also move from Unity to Unity Connection 7.0. There are, of course, some items that cannot go between versions and products given the differences in features and data structures across them. Be sure to review the details in the Data Backed Up and Restored section below to understand what’s potentially lost when going across versions or products.
NOTE: When restoring a Unity backup to another Unity installation, the version can be different but must be later than the version backed up. You can restore to the same version or later only, you cannot restore to an older installation of Unity. See the Version Support table below.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

AD Migration from NT 4.0 using New Domain Name & Unity UM

The customer currently has Unity 3.1(5) UM with Exchange 5.5 in NT 4.0 domain. They will be migrating to AD 2000 during phase 1 of the project, which will be followed by Unity upgrade to 4.0(4) a few weeks afterwards.
During the phase 1, Exchange 2003 will be introduced, but the mailboxes will remain in Exchange 5.5 until phase 2.
Here is the migration path proposed by the customer for the phase 1.
1. Current DNS will be isolated to a W2K server with the new domain defined in the DNS. All servers will point to this DNS server as their primary.
2. A BDC will be setup and then removed from our network.
3. Our PDC will be upgraded to Windows 2000 server. AD will be setup with a new domain of XXX.PRV
4. Service packs will be applied to the server.
5. The AD connector will be installed for Exchange 5.5
6. An additional W2K server will be brought online as a DC and additional global catalog.
I do realize that domain name change is not supported for Unity, but would this have any impact on Unity? Basically, the PDC that will be upgraded to W2K DC will retain old domain name (XXX_NT) as the NetBios name whereas the new DNS domain name will be XXX.PRV.
Since Unity does not need to talk to AD or Exchange 2003 at all until the phase 2, Im thinking this would be okay, but wanted to get some expert opinions on it. Also, the customer has tested some legacy servers in the lab, and they were able to authenticate against the XXX_NT domain name in the new XXX.PRV AD environment.
Phase 2 will consist of the following tasks.
1. Run DB Walker.
2. Back up using DiRT.
3. Extend AD schema.
4. Upgrade Unity to 4.0(4).
5. Disconnect Unity from Exchange 5.5.
6. Upgrade Exchange System Manager on Unity.
7. Re-establish Exchange partner relationship using Exchange 2003.
8. Run DB Walker.
9. Move Exchange 5.5 mailboxes to Exchange 2003.
Thank you bunch!
Han

Your project (from oh so long ago) looks very similar to what I am proposing to do now. I currently run Cisco Unity 4.0.4 SR1 with Exchange 5.5 (Unified Messaging), on an NT4 network. I have recently upgraded my network to Windows 2003 with Active Directory. I am building a new Exchange 2003 server in the new domain but not upgrading Unity 4.0.4--at least, not yet. I am looking to change the Partner Exchange server to point at the new Exchange server. I see no docs that cover such a scenario--only lateral moves (5.5 to 5.5, 2003 to 2003). As long as the ADC is in place, do you think I even have to change the Partner server when my new Exchange server comes online (initially)? How did your project turn out? Did you have to change the process you outlined above?
Thanks for any info!
John

Unity and IPCC SQL question

Hello All,
I have a question in regards to SQL, In the past I have been told that no maintenance was needed on the servers in regards to SQL (backups / reindex) and that it was all automated. Is that statement still correct in version 5 and 7 that we should not worry about the SQL installs on the box?
2. Because the SQL version is 2000. What are the steps for us to get the versions upgraded to at least SQL05?
I know that with unity you need to go to the cisco site and download the unity upgrades, but for IPCC what do i need to do ?
thank you

There is no SQL upgrade that i know of for either product, Unity 8 will be the 1st version that will support SQL 2005
•The applicable version of Microsoft SQL Server:
–On a system with more than 32 voice ports, SQL Server 2005 Standard Edition or SQL Server 2000 Standard Edition
–On a system with 32 or fewer voice ports, SQL Server 2005 Express or SQL Server 2000 Desktop Engine (MSDE 2000)
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/requirements/8xcusysreq.html
The requirement would be to upgrade to Unity 8.X
I believe UCCX won't change SQL version (and DB platform) until they release the Linux version which will drop SQL.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Replacing CUCM VMs with newer ones?

Hey all,
I recently upgraded from 8.6 to 9.1, all is well. I have 2 questions:
1. In order to meet the disk size requirements, do I have to build new machines and restore from DRS? If so, since they have to be built identical, any suggestions on doing this without causing a production outage?
2. Unity upgrade threw back an error stating the machines did not meet requirements, same as above?
Thanks,
Frank

Change Virtual Machine Configuration Specifications
Use the following procedure when you need to change the configuration specifications on your virtual machine (VM) in order to upgrade to a new release of Unified Communications Manager or IM and Presence Service. Configuration specifications include the vCPU, vRAM, and vDisk size. For information about VM requirements, see the Readme file with the OVA template that supports your release. Details about OVA templates are available on the Virtualization Docwiki at http://docwiki.cisco.com/wiki/Implementing_Virtualization_Deployments.
Procedure
Step 1
Perform a Disaster Recovery System (DRS) backup. For more information about performing a backup, see the Cisco Unified Communications Manager Disaster Recovery Administration Guide.
Step 2
(Optional.) If you need to increase the vDisk space to meet the space requirements of a refresh upgrade, install the following COP file: ciscocm.vmware-disk-size-reallocation-<latest_version>.cop.sgn
Step 3
Shut down the virtual machine.
Step 4
Change the configuration of the virtual machine as needed:
Change the Guest OS version to match the requirements of the new release (Red Hat Enterprise Linux 6 (64-bit).
To change the vCPU, make the change in vSphere Client. Ensure that you change the reservation value to match the specifications of the new release.
To change the vRAM, make the change in vSphere Client. Ensure that you change the reservation value to match the specifications of the new release.
To increase the vDisk space, edit the disk size using vDisk. If the virtual machine has two disks, expand the second one. The new space is automatically added to the common partition when you restart the virtual machine.
Note
You need to change the disk size changes only if you need additional space to complete the upgrade. The disk space requirements are specified in the Readme file for the OVA template.
Expanding the disk size to add space to the common partition will not increase the user capacity of your system. If you need to extend the user capacity of your system, you must migrate from a single-disk to a multi-disk virtual machine; seeReplace a Single Server or Cluster for Cisco Unified Communications Manager for more information.
For more information about making configuration changes using vSphere Client, refer to the user manual for the product.
Step 5
Modify the Network Adapter to use the VMXNET 3 Adapter type. For information about modifying the Network Adapter to meet the requirements of this release, see the Readme file for the OVA template.
Step 6
Upgrade the software to the latest version.
Step 7
Power on the virtual machine.
HTH
Yosh

Licensing for Unity Connection after Upgrade from 8.5 to 9.1.2

I upgraded my Unity connection from 8.5.1 to 9.1.2. ( my CUCM is still on 8.5.1) . I have 200 CUWL-STD ( 2200 DLUs), and 50 CUWL-PRO (850 DLUs) . Now I am working with Cisco to get a license file for Unity Connection and apply that to my ELM. I attached my licensing page for when I was in 8.5.1 . Just want to make sure if I will be getting enough license with that license file, or possibly I need to buy more. Someone told me that if I want to have users with mailbox I need to order more licenses since every user take one CUWL license.
Honestly i do not know how CUWL licensing work regardig to Unity or even CUCM.
Thanks,

Hi,
The following link provides details of licenses usage by diff endpoints on version 9.x
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
HTH
Manish

Unity Connection - Certificate from cucm no more trusted for encrypted calls after upgrade to 10.5(1)

Hello Support Community,
i have a strange problem:
after upgrading my cucm and unity connection from 9.1 to 10.5(1) enctrypted calls are no more working.
situation 1: CUCM is down, Subscriber is up: Encrypted call to Unity Connection work correctly
situation 2: CUCM is up: Encrypted Calls to Unity Connection not working.
i get the following Info in the log for the Connection Conversion Manager:
19:35:21.053 |15865,,,MiuGeneral,25,Invalid Certificate: Received Certificate -----BEGIN CERTIFICATE-----
MIID8zCCAtugAwIBAgIQc/fBdUz1Zdh4CXhcPqGVuDANBgkqhkiG9w0BAQsFADBw
MQswCQYDVQQGEwJERTELMAkGA1UEChMCSVQxGzAZBgNVBAsTEkhlbGxnYXRlIFRl
XD0oD9d5MQ==
-----END CERTIFICATE-----
doesn't match with stored Certificate: -----BEGIN CERTIFICATE-----
MIIC2DCCAkGgAwIBAgIIJWCm4bSdt+kwDQYJKoZIhvcNAQEFBQAw
-----END CERTIFICATE-----
so where does Unity Connection cache this certificate and how can i delete/replace it?
the cert shown in the logs is the one from cucm: ("CallManager"), i recreated it through cucm os administration, now i see the same error message on unity connection for the new recreated certificate.

Actually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
Message was edited by: graphico
Message was edited by: graphico

Upgrading Unity Connection from 7.1.5 to 8.5.1 - not working

I am attempting to upgrade our unity connection boxes from 7.1.5 to 8.5.1.
I have legacy MCS 7845H2 - It has 4 disks - 2 mirrors of 72gb disks. 4mb of RAM and 2 X 2.3ghz processors
I have UCS C210 VMWare Hosts.
I have attempted 2 migration methods.
The first method involves - upgrading the existing system and restoring a backup of this to a VM
This fails with a hardware compatablity check.
The second method involves - backup existing systen - build VM at same level (using recommending OVA) - restore data onto VM - upgrade VM
This fails with a restore problem - I have used 'TITAN' ftp, but please note the backup is < 900mb.
The error is
Physical restore failed - could not fork server connection, SQLCODE -25596
Program over.
Restore failed during Unity Connection DB ontape restore operation.
----> BEGIN Standard Error
/opt/cisco/connection/lib/disaster-recovery/database_do_restore.real.py:32: RuntimeWarning: Python C API version mismatch for module iproduct: This Python has API version 1013, module iproduct has version 1012.
import iproduct
gunzip: stdout: Broken pipe
----> END Standard Error
Has anyone out there attempted to upgrade to 8.5.1 - please let me know how you got on.
Any help or ideas appreciated.

Here is the end of the restore log ...
CCM DB is in On-Line status after 6 second.
Restoring the Unity Connection database from ontape archive...
Archive Tape Information
Tape type: Archive Backup Tape
Online version: IBM Informix Dynamic Server Version 10.00.UC9XF
Archive date: Mon Sep 26 19:45:06 2011
User id: root
Terminal id: ?
Archive level: 0
Tape device: STDIO
Tape blocksize (in k): 32
Tape size (in k): 0
Tape number in series: 1
Spaces to restore:1 [rootdbs ]
2 [cuc_er_dbspace ]
3 [dir16 ]
4 [rpt ]
5 [mbx16 ]
6 [dyn ]
7 [mbx ]
8 [dir ]
9 [log ]
10 [cuc_er_sbspace ]
11 [ciscounity_sbspace ]
12 [ciscounity_sbspacetemp ]
Archive Information
IBM Informix Dynamic Server Copyright IBM Corporation 1986, 2008
Initialization Time 06/01/2011 15:51:53
System Page Size 2048
Version 14
Archive CheckPoint Time 09/26/2011 19:45:07
Dbspaces
number flags fchunk nchunks flags owner name
1 40001 1 1 N B informix rootdbs
2 48001 2 1 N SB informix cuc_er_sbspace
3 40001 3 1 N B informix cuc_er_dbspace
4 40001 4 1 N B informix dir16
5 40001 5 1 N B informix rpt
6 42001 6 1 N TB informix temp
7 40001 7 1 N B informix mbx16
8 42001 8 1 N TB informix temp2
9 40001 9 1 N B informix dyn
10 40001 10 1 N B informix mbx
11 40001 11 1 N B informix dir
12 40001 12 1 N B informix log
13 48001 13 1 N SB informix ciscounity_sbspace
14 48001 14 1 N SB informix ciscounity_sbspacetemp
Chunks
chk/dbs offset size free bpages flags pathname
1 1 0 250000 183419 PO-B /var/opt/cisco/connection/db/root_dbspace
2 2 0 915000 176607 POSB /var/opt/cisco/connection/db/cuc_er_sbspace
3 3 0 85000 83217 PO-B /var/opt/cisco/connection/db/cuc_er_dbspace
4 4 0 128000 13824 PO-B /var/opt/cisco/connection/db/dir16_dbs
5 5 0 1024000 744409 PO-B /var/opt/cisco/connection/db/rpt_dbs
6 6 0 512000 511922 PO-B /var/opt/cisco/connection/db/temp_dbs
7 7 0 512000 495816 PO-B /usr/local/cm/db/informix/data/mbx16_dbs
8 8 0 512000 511897 PO-B /var/opt/cisco/connection/db/temp2_dbs
9 9 0 128000 110000 PO-B /var/opt/cisco/connection/db/dyn_dbs
10 10 0 128000 119774 PO-B /usr/local/cm/db/informix/data/mbx_dbs
11 11 0 1024000 362797 PO-B /var/opt/cisco/connection/db/dir_dbs
12 12 0 150000 24947 PO-B /var/opt/cisco/connection/db/log_dbs
13 13 0 10000 518 POSB /var/opt/cisco/connection/db/ciscounity_sbspace
14 14 0 450000 22554 POSB /var/opt/cisco/connection/db/ciscounity_sbspacetemp
Physical restore failed - could not fork server connection, SQLCODE -25596
Program over.
Restore failed during Unity Connection DB ontape restore operation.
----> BEGIN Standard Output
----> END Standard Output
----> BEGIN Standard Error
/opt/cisco/connection/lib/disaster-recovery/database_do_restore.real.py:32: RuntimeWarning: Python C API version mismatch for module iproduct: This Python has API version 1013, module iproduct has version 1012.
import iproduct
gunzip: stdout: Broken pipe
----> END Standard Error

CUCM/Unity/Presence Upgrade from 8.6.2 to 9.1

Hello,
I am planning an upgrade of our UC environment this weekend. I've been in contact with Cisco Licensing support all week to get the appropriate license for all the services. For CUCM I have ran the Pre Upgrade License Utility however they keep asking me for the ELM license request.
I've told them several times that ELM gets installed during the upgrade so I cannot provide the information beforehand. They've escalated my ticket to product management however i'm not sure i'll get a response before my maintenance window.
Can I proceed with the upgrade of CUCM/Unity/Presence and resolve the licensing afterwards? will it run in eval mode for a while?
Can someone also confirm this is the proper upgrade order?
CUCM Publisher Upgrade to 9.1
Unity Publisher Upgrade to 9.1
Presence Publisher Upgrade to 9.1
CUCM Subscriber Upgrade to 9.1
Unity Subscriber Upgrade to 9.1
Presence Subscriber Upgrade to 9.1

Yes, you get 60 days to solve any kind of licensing issue

Unity Connection Upgrade from 8.6.2 to 9.1 latest version

Hi,
Am planning to Upgrade my CUC(Unity Connection) from 8.6.2 to 9.1 latest version, having my Call manager in the same version 8.6.2. I will upgrade my Call Manager from 8.6.2 to 9.X later.
Hope i can upgrade my CUC first.
I need some info like,
1) Am not getting the image to download which can upgrade from 8.6.2 to 9.1 latest version directly. Should i have to move to 9.0 first and then to 9.1 ??
2) Is their any pre cautions need to be taken care/ well known issues during the upgrade.
3) Also, hope licensing get migrated automatically (no need to have extra efforts)
4) Advantages of Moving to 9.x wrt to features compared to 8.6.
Pls suggest.
Thanks
Jagadish G

Hi Jagadish,
Just to answer few :
you can downlaod the image from below link under UC Applications amd messaging:
http://software.cisco.com/download/release.html?mdfid=284603371&flowid=45680&softwareid=282074295&release=8.4(1)&relind=AVAILABLE&rellifecycle=&reltype=latest
Supported Version Combinations for Cisco Unity Connection 2.x and Later with Cisco Unified Communications Manager
Cisco Unity Connection
Cisco Unified Communications Manager
2.x and Later
9.1(2), 9.1(1), 9.0(1),8.6(2),8.6(1),8.5(1),8.0(x), 7.1(x), 7.0(x), 6.1(x), 6.0(x), 5.1(x), 5.0(x), 4.3(x), 4.2(x), 4.1(3)
No new functionality has been introduced in UCXN 9.1(2)
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/release/notes/912cucrn.html
for licensing on ELM, u need to get in touch with [email protected] take backup of UCXN 8.6 before initiating upgrades.
regds,
aman

CUCM & Unity - both 8.6 - to 9.1.2 - Refresh upgrade file ? & Reload Sequence

Hi guys,
I have two questions..
I have to update CUCM 8.6.2 (Cluster of 2 ) to 9.1.2
And Unity 8.6.2 ( cluster of 2 ) to 9.1.2
First question,
Do I need the refresh upgrade file For CUCM 8.6.2 before upgrade ?
Do I need the refresh upgrade file For Unity 8.6.2 before upgrade ?
Second question,
From what I know For CUCM I Update PUB First, then Reboot PUB... once done I Update CUCM SUB and Reboot SUB.
For Unity, I think I have to update Unity PUB ( no reboot) then Update Unity SUB ( once both update, I reboot PUB, and when it is UP I reboot Unity SUb )
is that right ?
thanks,

Here is the process for migrating licenses:
Upgrade your apps to version 9, you will run in 60 day demo mode
Install ELM and add UCXN and CUCM instances to it
Go through license migration process in ELM
2 files will be generated for license migration one for CUCM and one for UCXN
Send these to [email protected]
Cisco will issue new licenses for version 9 based on what was configured and what you are entities to based on UCSS
My experience is that they don't spend too much comparing to what you are actually entitled to so you may want to need to work with them on manually adjusting anything, i.e. convert Enhanced/Enhnaced Plus to CUWL, etc.
Chris

Failure to upgrade Cisco Unity Connection 8.6.2 to 9.1.2

Hi everybody.
Has someone that can help me with follow problem?
I making a Cisco Unity Connection upgrade from version: 8.6.2.20000-76 to 9.1.2.10000-28. But unfortunately we can't sucessfull to make this process.
On the finish of this process, I can see this outup error:
11/23/2013 12:28:55 upgrade_manager.sh|Cleanup exiting - Cached Data: [Vendor= VMware, Inc.
HWModel=VMware
CPUCount=2
CPUType= Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
CPUSpeed=3300
MEMSize=6144
BIOSVer=PhoenixTechnologiesLTD 6.00 06/22/2012
ObjectId=1.3.6.1.4.1.9.1.1348
OSVersion=UCOS 5.0.0.0-2
SerialNumber= VMware-56 4d e0 4f 4d 85 87 7b-eb 22 0e 52 a7 73 1a 22
VendorOID=1.3.6.1.4.1.674]|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleaning up download...|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
11/23/2013 12:28:55 upgrade_install.sh|Removing /common/download/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Started auditd...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|IOWAIT monitor stopped|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|<LVL::Error>
11/23/2013 12:29:00 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 14477).|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 14477)|<LVL::Debug>
Best Regards,
Claudio Costa
A mensagem foi editada por: Claudio Costa

Tks Manish, I just perform a restart on the both nodes on my CUC cluster and after that I did can install this upgrade patch.
Also is very important install the upgrade patch on all servers of the cluster before perform a switch-version on the publisher and then on the others nodes.
Best Regards,
Claudio Costa

Upgrade Unity Conn from 8.0.(2) to 9.1(2) and migrate from MCS to UCS...

Hello Ladies and Gents .
Currently I have a cluster of Unity Conn. 8.0.2 on MCS.
MCS have an arrangement of two disk. the cluster is supporting 2.5K users.
My doubt is about the OVF for UCS.
I've made the upgrade to 9.1.2 but I used the ovf template of 10K users (4vCPU / 6GB RAM / two 146GB vDisk)
Now I got the DRS backup and I will do the last step. a fresh install of 9.1.2. and restore the DRS backup in the fresh install.
Can I use the DRS backup ( 2vDisk setup) with the OVF template of 5Kusers (2vCPU / 6GB RAM / one 200GB vDisk)?
Thanks
AM

Hi Jaime,
Thanks for your prompt response.
So there is no problem if I restore a DRS backup of a CUC with 2vDisk, into a fresh install with1vDisk?
I just want to be sure that my question was clear.
Thanks Again
AM

Unity upgrade

Similar Messages

Maybe you are looking for