Universal Access only showing at log-in screen

For some reason Universal Access is only showing at log in on my school iMac. I have logged into the admin account and checked universal access, but it is turned off. It is giving me the little black box that tells me where my cursor is and what it does. For example at the log-in "Name" field it is surrounded in a black border and the black box says "You are currently on a text field. To enter text in this field, type."
Any help would be great.

Hi there,
Firstly make sure you have restarted your computer, and tried again.
Then complete these simple troubleshooting steps.
Let me know if they help, and if not, Ill get back to you with some further troubleshooting steps.
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/ht3964

Similar Messages

  • My ipod will only show the dead battery screen and wont taking a charge.

    my ipod will only show the dead battery screen and wont taking a charge on any of my sinc cords or my outlet charger. And I have checked that nothing is in the plug port blocking the electrodes. What do I do now?

    Put the device in DFU mode (google it) and restore via iTunes.

  • Ipod touch wont switch on and constantly only shows the apple logo screen

    ipod touch wont switch on and constantly only shows the apple logo screen. Have tried to reset by holding both buttons down but hasnt worked. it also doesnt appear on itunes.

    Hvae you tried:
    - Reseting the iPod and then try restoreing the iPod
    - Placing the iPod in recovory mode and then restoring the iPOd.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • 8Gb Touch 2nd gen problem. Only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem

    I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
    Any idea what I can do to fix this?

    you can connect the iPod to iTunes in recovery mode:
    Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
    Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
    After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
    and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes)

  • Why appstore only show half on the screen on my iPad2 (IOS6)

    The AppStore only show half (left) on the screen

    Double tap the screen with three fingers.
    If you do not want this zooming, in settings/general/accessability disable the zoom.

  • HT4623 i updated my ipad 2 with ios 702 today and it has crashed only showing me a black screen with the itunes logo and a charging cable diagram on it. wont turn on at all, any help appreciated?

    I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?

    iPad is in Recovery mode.
    Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start.

  • Illustrator tutorials only show top of the screen/won't scroll on Mac OS X Yosemite

    I've just downloaded Illustrator onto a brand-new Mac running OS X Yosemite. 
    I've never used Illustrator before, but am familiar with Photoshop.
    I've got the screen with the tutorials/tips open.  It will only show the top of the screen - there is clearly lower information, but I can't get to it.  I can just click on the videos on the bottom of the screen, but can't scroll down to see them. 
    Tips?  Any idea what is happening?

    The tutorials are downloaded from the internet, so in case your Firewall settings don't allow Illustrator to get them or the internet is down, then you might not be able to see them.
    What happens when you scroll way down - there should be a button to hide the welcome screen. Is it there?
    Maybe some staff people can shed some more light on this.

  • Iphone locked up while updating to i0S6 will only show itunes logo on screen w/ usb

    my iphone has locked up and will only show the itunes logo with a usb port and an arrow ?  Have rebooted both the iphone and the computer with no change.

    Try restoring it if iTunes recognizes it.
    Basic troubleshooting steps 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Iphoto 9.5.1 shows mpeg-4 files as a thumbnail, but will only show as a black screen when you double click on it, other video files are able to be played and are viewable.  Why?

    iphoto 9.5.1 shows mpeg-4 video files as a thumbnail, but will not play the video.  When try to play video it shows as a black screen.  Other video files play ok- (mpeg, .mov).  What do I have to do to view them?   If I use imovie they will play, but I sometime like to view them in iphoto.  It worked before I upgraded to 9.5.1 and 19.9.2 of the operationg system.

    Select the thrumbnail of one of the videos and use the File ➙ Reveal in Finder ➙ Original menu option.  That should take you to the original mpeg4 file. 
    If it does then try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
    OT

  • While updating software of Ipad, it stop working and only shows the Apple on screen. How can I recover?

    While I was updating the software of my IPad, it stopped working and only shows the apple logo. How can I recover my IPad?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • When using multiple displays, is it possible to only have full screen zoom (universal access) only effect one display?

    I am visually impaired which makes it difficult for me to use computers. The zoom feature in Mac OS is extremly useful to me and is the first reason I choose mac over windows. Although, now that I've been using a mac for 8 years, I would pick a mac any day! For my work flow, I utilize two displays. It would help me greatly if there was a way to only effect one display with the zoom feature.
    Thank you for your input,
    Zachary

    http://support.apple.com/kb/PH11488
    You can set the zoom to ONLY follow your mouse (And adjust the size of the "zoom window" that follows it). I used to use this with Quick time Editing when I had a 13" iMac.

  • Firefox is freezing, then only showing a white blank screen when I try to load it.

    Ok, I have not had any problems with firefox, I was logging on it all the time, everyday, etc... with no problems until today. Today when I went to log onto the net, firefox opened, and it looked like everything I had customized from tabs, bookmarks and etc... had been wipped off. But also, it would not load any page, none of my bookmarks were showing in the side bookmark window that was open. It would only say "connecting..." in the only tab that was there. I could not click on anything, or do anything. When I tried to click on anything within it, I would get the "not responding" error at the top, and then the whole browser would disappear, and be replaced with a white blank page, with only the firefox logo, in the blue bar at the very top. This would also be frozen, and I could not even get it to close. I would have to open my task manager, and close it that way by stopping the process.
    I have not installed anything new on my comp, I have not downloaded unknown things, or anything new I do not think recently either. Like I said I have been using firefox for years, never had this problem. I used it just fine even this morning before I went to bed. Then tonight when I woke, logged on, this was happening.
    I have tried using IE, and IE is working just fine, without any problems. I used IE to download, and then update firefox to the newest version, still no change. By the way I was not running "really old" version or anything, I keep my firefox updated. Soooo can someone help me?

    I have a similar issue -- using an embedded google form rendered as an iframe. It is present in the source, but displays as blank space.
    This problem seems to be confined to Mac OS X (I'm on 10.6.3), and I didn't have this problem with FF 3.6.x (not sure if I ever had 3.6.9, or what version I had prior to 3.6.10). The issue is not present in Chrome or Safari, or on 3.6.10 on Windows 7.0 I believe

  • Just bought the Mac Book Pro 17" - set up all OK but the applications are only showing on a small screen size, not full screen - the background is still visible as a margin - how do I take the view to full screen corner to corner so to speak.

    Just bought the Mac Book Pro for my photography  - set up and running last night, but the user screens ie Hot Mail, safari etc.. are only half size sat on the background - I have exhausted the help and calibration log...surel this must be simple to fix...any help out there..thanks..Paul.

    Have you just moved over from WIndows?
    This is standard on Macs. The ability to see more than one window at a time. Some apps - like iPhoto, Aperture etc - have a Full Screen mode. Check out the View menu.
    Drag the lower right hand corner to resize the window.
    Regards
    TD

  • After downloading IOS 5.1.1 new iPad only shows connect to iTunes screen- computer does not recognize iPad now

    Against my better judgement, I let iTunes update my ipad with the 5.1.1 IOS.  After the download was complete, the iPad showed the Connect to Itunes screen and the device wasn't showing in my iTunes so I unplugged the USB.  Now the iPad is stuck on the Connect to iTunes screen.  I have tried doing the system restore trick, and that looks like it works when the Apple logo shows up, but right after that it goes back to the Connect to iTunes screen.  I tried just plugging it back into my computer and connecting it to iTunes but now neither iTunes nor my computer recognizes the device.  The iPad will not go to any other screen and will not even power off, just stays on the Connect to iTunes screen.  I live 300+ miles from the nearest Apple store so going in is not really an option.  I would appreciate any help that would keep me from throwing this thing against the wall. 

    Dear Diavonex,
    I have a similar issue, I tried doing the restore, but now the computer is unable to recognize the ipad. Itunes does not detect the ipad. The ipad works but not able to sync with the computer.
    Checking on the device manager of windows 7, it shows that there is an unknown device with no driver for it. How to get a driver for the same? Any suggestions?

  • Can't login on my MBP, main screen is damaged, secundary screen only show background of login screen

    I have an 17" MacBook Pro, purchased in 2007, it's running 10.7
    Recently the screen got smashed, I'm tryin' to start it with an external monitor so I can retrieve my data,
    but I got a multiple user login screen, and all I got on the external monitor is the image of the background pattern.
    Any ideas of how can I log in?

    10.7 is Lion, right. So your login screen is images with the user names underneath?
    I think you could try using the left arrow several times,to bring you to the first name...
    then hit return and type the password, since I believe the password box would be highlighted
    IF that works, not sure how you would get the display shifted over to your external monitor, since it doesn't sound as if it was set up to mirror the main display.
    Not much experience with external monitors, and not able to test at present.
    Good luck

Maybe you are looking for

  • Inserting an indicator using a cursor

    I need to write a procedure that will use a cursor like the one you see in the select statement, how I can write another cursor that will insert an indicator of Y in a column if the szslife_pidm repeat the same building code and room number in two di

  • Is there any books in the book store for merchant mariners. Study books.

    I would like to know if there's any study books to purchase in the book store for iPad. I'm a merchant mariner (oil field supply vessels) studying for 3rd Mate unlimited. I searched on iPhone 5 and no results maybe iPad can pull something up.

  • My final version of a table with row headers and column footers

    This version is superior to the one I posted yesterday as it is better designed and responds to changes in size correctly. You can also have a header/footer with multiple columns/rows. import javax.swing.*; import javax.swing.event.*; import javax.sw

  • Does anyone have trouble watching youtube on Safari?

    Whenever i try to load a video, it just stays black, and no video follow. This onyl happens when I watch youtube on safari. My other browser, google chrome works just fine. Do anyone else face the same problem? Is there any way to rectify it?

  • Need help, I am waiting for XML to onLoad to be called before sending return statement

    I have created a function that is going to return an array based on some XML that I am loading. Below is a visual of what I am trying to do. I am basically looking for a way to have my function wait for the xml to be loaded before the return function