Universal Dock "not supported"?

I just got a Universal Dock for my 60GB iPod and when I plug the iPod in I get a message on the iPod:
"The currently attached accessory is not supported by the iPod."
I'm currently connecting via USB 1, could that be the problem?
P.S. So far the 2 USB 2.0 Cards (ioGear, and SYBA) I've tried don't seem to support the iPod, I'm hoping the third one (Sonnet Allegro) will.

Never mind, seems like connecting the iPod to the aforementioned incompatible USB 2.0 cards confused the iPod...
Oct 27 18:30:10 Ians-Computer kernel[0]: USBF: 213.170 IOUSBCompositeDriver[0x2756080](iPod) Could not get any configurations
After rebooting the iPod it seems to work fine.

Similar Messages

IPdo Universal Dock /// Not made for home stereo use

Wow, after talking to “Dawn” at Apple technical support I was advised against using the iPod Universal Dock to connect to my home stereo. Apparently it was made for convenience rather than sonics. Funny but the older model (without the remote and s-video jacks) sounds great when connected to the stereo verses using the iPod’s headphone jack.
Looks like I’ll be returning the Dock and Remote….
Here’s my original email to the iPod store:
Gentlemen,
At the advice of a friend I recently purchased the iPod Universal Dock (w remote)to connect to my stereo. This was based on his claim (which I verified) that the dock sounded substantially better than the headphone out jack (using the Monster Cable interconnect). Unfortunately the new Universal dock (w/ s-video & remote capabilities) sounds worse than the iPod’s headphone jack. We did a lot of comparisons using the older generation doc and have identified that it’s my new dock that sounds like garbage.
Is my Dock faultily or was the old one sonically better? Either way I would like to return my doc for either an exchange (if you believe my dock to be faulty) or a refund.
Thanks
Tony
nano Windows XP
Windows XP

I recently purchased a universal 5 in 1 docking station that is suppose to charge my nano and also play through my stereo also but when I hooked it up to my stereo I can't get it to play. Wondering what I could be doing wrong, does the stereo have to be on a certain station? Any suggestions I might could try. There was not much instruction that came with it just a diagram but looks like I followed the diagram?!

"old" Universal Dock not working with iPod Classic/iPhone

I purchased the Universal Dock back when it came out. Now I have upgraded to a new Classic & iPhone and neither seem to work to the TV through it. I took having to spend another $49 on the chin and bought the new composite AV cable, which by the way does work with YouTube after Apple told me it wouldn't, nice bonus. The new cable works great (haven't tried charging yet), however, plugged into the dock, the remote works, but I get no audio or video out to the TV. iPhone gives me the standard not compatible and wants to go into airport mode which is fine, but then the video plays on it's (iPhone) screen. The Classic pretends everything is working great. Do I have to go spend another $49 on a new "Universal" dock now?

Did you already have a look here http://docs.info.apple.com/article.html?artnum=300233? It specifies exactly what combinations of cables, docks, and iPod models do and don't work. Looks like the old dock doesn't work with the new iPod's.

Altec speaker dock Not supported

Hi I have an altec Duo speaker dock and the Wifes 3Gs works fie Mine 4Gs not supported after IOS6 update
What has apple changed in this update

ok so just reset the speaker and ipod and now it works! Still havent tried the ipad 2 yet.

Ipod dock not supported!

I have a itrak speaker dock from encore technology. I can't get anything to work but it says it's compatible. But I have ios 6.0.1 and the dock says its uncompatible with the ipod touch. It's a 4th gen. Anyone know what is wrong? It also wont work with my ipad 2 with ios 6.0.1 too! I havent tried ios 5 cause i cant revert back to it.

ok so just reset the speaker and ipod and now it works! Still havent tried the ipad 2 yet.

How do I uninstall Firefox 5 and get Firefox 3.6. My University systems do not support FF5

I have a MacBook Pro with Lion. My university does not support anything other than FF 3.6.

See this article about how to install multiple versions on Mac OS X:
* http://www.businessinsider.com/how-to-run-firefox-4-and-3-simultaneously-in-mac-os-x-with-multiple-firefox-profiles-2011-3
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html

Does the Universal Dock provide a true Line-Out port?

I recently bought a Universal Dock for my new black iPod. However, when I tried to connect it with an audio system or with video editing equipment, it turned out that it did not provide a true line-out signal. Instead, what came out was just the same sound as when using the headphone port. This means much less dynamics as the sound is obviously filtered and processed by an equalizer. I can raise the volume with the scroll wheel, but that is not the point. I'm sure this used to be different with my old 3rd generation iPod and a conventional dock. Even when I hook up the iPod with a Belkin Pocket Dock, I get a true and clear line-out signal with a constant volume, no matter whether the Pod's volume control is up or down. What's wrong here? Why does Apple suggest you get line-out when you can't? Is there a third party solution which supports the Apple remote control?
Thanks! Joerg.
Fifth Generation iPod Mac OS X (10.4.9) Black

I get line out with mine and the volume wheel does
not have any effect on the sound. You are connecting
to the 3.5 connector on the dock?
Yes, of course. This puzzles me. You are using a UNIVERSAL dock, not a conventional one? I mean, the one that you can operate with a remote control? As I said, I checked the problem with another universal dock at my retailer, and it showed the same problem. No full line-out, and the volume wheel DID have an effect on the sound. Should I e-mail Apple about this and ask them whether they sell different kinds of docks depending on the respective continent? And is there any Apple e-mail address for complaints/questions like this?
Thanks anyway!

Is the universal dock compatible with ipod 4th generation

Is the universal dock compatible with ipod 4th generation

Hey there Punk Phil,
It sounds like you are wanting to know if the Universal Dock is compatible with your iPod. If you are referring to the iPod Touch 4th gen, then yes according to this article it is:
Learn about Apple Universal Dock
http://support.apple.com/kb/ht1380
The Apple Universal Dock includes five Dock Adapters that fit iPhone 4 and 4S, iPhone 3G and 3GS, iPod touch (2nd, 3rd, and 4th generations), and iPod nano 5th generation. Dock adapters for other iPhone or iPod models are sold separately. For a complete list of products that can be docked with the Apple Universal Dock, see the table below.
Thank you for using Apple Support Communities.
Take care,
Sterling

Does the iPod Universal Dock work with the Apple Component AV Cable?

I have the iPod Universal Dock (MA045G/A) and the Apple Component AV Cable (MB128LL/B)...the ones in the original black packaging.
I had wanted to connect either my Nano 3G or my iTouch 1G to my TV, but neither would work through the docking station with the AV cable. Both did work when I tried not using the dock and connected both the Nano and the iTouch directly into the AV Cable.
My dock works great on my Computer, and I tried a second dock (same model) that I had into the TV with the AV cable and it still did not see the connection.
Is my particular iPod Universal Dock NOT COMPATIBLE with this Apple Component AV Cable (or for that matter, the Composite AV Cable-MB129LL/B)?
It's not a big deal since both do work with the AV cable by itself...it's just annoying I can't use the dock...

Are you sure it is genuine Apple cable? If you bought it on eBay or non-authorized Apple dealer it probably isn't. If it is a genuine cable, it is defective, and should be returned.
When a working genuine Apple A/V cable is plugged into iPhone, a popup appears asking if you want to enable the TV output. Since you are not getting this popup, your cable is bad.

I had an ipod touch 4th gen and used the apple universal dock to play music through my stereo. I just got a 5th generation and a lightning adapter but the adapter does not fit the universal dock. Apple tech support has no solution, does anyone?

I had an ipod touch 4th generation and used the Apple Universal Dock to play music through my stereo. I just got the 5th generation and the lightning adapter but the adapter does not fit into the dock. Apple tech support has no solution, does anyone?

That is the adapter I purchased from Apple which does not fit in the Apple Universal cradle (which apparently is no longer universal). However, I just created my own solution. The cradle holds the dock connector at a slight angle so the adapter, which has a straight bottom edge, will not slide down far enough to make a connection. Since the adapter has a plastic case, I used my Swiss Army knife to whittle it down to fit. It's a no-tech solution, and free!

Iphone4 ios6.0.1 apple universal dock "This accessory is not supported by iPhone"

Get this error message on phone when I put iPhone4 (iOS 6.0.1) into Apple Universal Dock. ?

Having "this accessory is Not Supported by iPhone" on many of my non-apple accessories. What's up with that??? Researched on a particular accessory and saw the below. Apple you have some bugs that need fixing. Interoperability and consumer choice is the best platform.
Anyone one else having sudden issues in the last year????
Motorcyclemd
Logi Nu
Posts: 4
Registered: 02-21-2013
Give Kudos
Re: S715i This accessory is not supported by iPhone
Options
02-25-2013 03:23 PM
I have been dealing with this for weeks now. Contacted Logitech and they said it is an iOS 6.1 issue! Chatted with Apple iPhone support who recorded my call as a complaint/bug; recommended submitting feedback to Apple engineers; and so I wait for it to appear in iOS 6.1.3 or later. I have iPhone 4S w/iOS 6.1.1 and error message stating accessory is not supported by my device; whereasy wife's iPhone 4 works fine on the s751i
Report Inappropriate Content
Message 5 of 5 (205 Views)
Reply

Will it hurt 3GS to use a dock that says 'charging not supported'?

I have a Logic3 universal dock and when I plug in my 3GS it immedaitely says 'charging not supported' yet it does actually charge the phone and syncs to my computer. Will it hurt the iPod to use this dock longterm?

My son is having similar problems with his new dock (Xmas present) and the new touch 32G.
When we took them back to the retailer they suggested resetting the Ipod and trying again, it worked, then went back into the not charging mode after loading up the songs and apps again.
I may be wrong but I think it has something to do with the new Ipod/Iphone models not charging from the Firewire input.
I think that the docking stations are using that voltage input to the Ipod for the charging circuit.
This could render many many devices on the market and in the home today unusable on the new devices apple are bringing out.

The Group Policy Client service failed the sign-in The universal unique identifier (UUID) type is not supported

Hi guys,
we created a custom WIM Image (Windows 8 Enterprise) with MDT 2012.
Sysprept the Image, Deployed via SCCM 2012 SP1.
Computers are Domainjoined. Error with standard Domain User.
On some computers (not every computer) and not with every user on the first logon following error message arises:
The Group Policy Client service failed the sign-in The universal unique identifier (UUID) type is not supported
It works, when you log in a second time but this error isn't very nice.
Is there a solution for that?
Kind Regards
Martin

Hi,
The service is responsible for applying settings configured by administrators for the computer and users through the Group Policy component. This issue can be caused by various reasons based on the computer environment.
Can you find any information in event log about this issue?
Here is the related blog in which the steps can solve most of such issues if the issue continuously happen.
http://blogs.msdn.com/b/moiqubal/archive/2012/03/04/how-to-fix-quot-the-group-policy-client-service-failed-the-logon-access-denied-quot-error.aspx
Also, you can refer to the similar thread about this issue:
http://social.technet.microsoft.com/Forums/en-US/4a644219-50ee-494d-b965-e64a8555109e/the-group-policy-client-service-failed-the-signin-the-universal-unique-identifier-uuid-type-is
Since this issue can be related to SCCM, to better help you, please submit a new thread for further help:
https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
Hope these could be helpful.
Kate Li
TechNet Community Support

Error message "The currently attached accessory is not supported by this iPod" is shown when connected to my Zeppelin Air Dock.

I have 2 iPods, one is a 60GB Classic formatted to Mac the other is a 80GB Classic formatted to Windows. When either is connected to my Zeppelin Air Dock, a message appears on the iPod saying "The currently attached accessory is not supported by this iPod"
I have updated the firmware on the Zeppelin and have the latest updates on each of the iPods.
The Zeppelin works fine and connects to the computer and laptop without issues.

I'm having the same problem, it just started today. I've been running w/ the nike+ sensor and receive w/ my iPod nano for 6 months, logging 75 runs, so don't understand why I'm getting this error now.
Can someone please reply w/ how to resolve this issue? I have Nike+ challenges coming up soon that I can't miss. Thanks!

My ipod touch 3rd gen doesnt work on usb charger but on dock it says "Charging is not supported with this device" How do I fix it?

I'm taking it in to get it looked at but will they cover this? And is there a way to fix it before I take it in. I'm still under the 1 year warranty plan. My friend said that they might exchange it. It's a 64GB and I use it for a lot of things like my picture, music, contacts, and email. It's got scratches on the back but other wise its ok the screen isn't cracked or scratched.
I have a usb charger for it but when I plug it into the PC or my wall charger it won't charge. It just says "Charging is not supported with this device". It even says that sometimes when it's not charging. But it works on a dock station like my clock or radio.
Also my home buttom won't work unless I press down real hard. This scares me because I'm afraid I wil persss it too hard and break it even more.
Please help.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Universal Dock "not supported"?

Similar Messages

Maybe you are looking for