Universal Installer doesn't run
Hi everyone,
I'm trying to install Oracle 10g on Win2k SP4. My problem is when I run setup it opens console window and than disappears. Javaw is staying in memory. I have the same problem with Workbench on this PC. No errors in logs. Nothing. I have JRE 1.5.0_06 (I reinstalled it twice).
I have found the solution on SUN site. I have PCAnywhere 10.5 installed. This is the reason. It makes disappear Java GUI. THanks everyone.
Similar Messages
-
Oracle Universal Installer doesn't run
Hi,
I had Installed oracle 9i and Oracle 8i (firstly) on the same machine and the same drive, then I deinstall oracle9i using Oracle Universal Installer. Some months later I need to reinstall Oracle 9i but the Oracle Universal Installer doesn't run even on the Installation CD (CD_Drive:\Install\win32\setup.exe).
Can you please help me to fix that.
Thanks,
BOUBAKARY.JVM's JIT of an old Oracle Installer version has a bug, so it crash in PIV based computers. A work around is to copy CD to hard disk and delete SYMCJIT.DLL file, and start installer again. I hope this helps.
Regards.
Jose Luis Rando
DBA Isofoton S.A. -
Universal Installer refuses to run on Win 2000 Server P-II
Hello,
I've seen this problem all over but some people tell me it should only happen with P4 chips? As soon as I plop the 9i install CD into the drive, it auto runs and I click INSTALL. Within a couple seconds, I get a message:
"The Java Runtime Environment was not found at c:\docume~1\admini~1\locals~1\temp\orainstall\jre\bin\jrew.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.1.7 or greater and try again."
I had this problem on an existing server so I did a BRAND NEW installation of Windows 2000 Server and then applied SP3. Still same problem. The processor is a PII-366. What could be wrong?
I've followed all the steps I have found so far:
I've tried copying the install disks to the hard drive.
I've tried renaming the symcjit.dll files (all of them).
I've made sure that all the files are not read only (since they came off of
the CD-R)
I've tried downloading various versions of the JRE (from 1.1.8 to 1.4)
I've read the installation .PDF included on the CD.
Thanks for any suggestions.
...BradHi Raghavan,
Have you applied Services Pack 4 to your WIN 2K SVR installation? If not please do so. After Installation of Oracle 8i you should update the listener.ora (found under ...\<oracle home>\ora82\network\ADMIN). For further details check Oracle installation guide.
Cheers,
Ravi -
Oracle 8i Unserval Installer doesn't run
I have oracle 8.1.6 CD enterprise edition and Mandrake Linux 7.2. I tried to run installation by execute runInstaller script but I got an error message says that I don't have Java Runtime Environment (JRE 1.1.8 or later) install on my linux machine. However, I did have JRE 1.3 installed. I kept getting the same error message. Does any know what's going on here? I appreciate your any suggesting.
Thanks Wallace for your reply.
I try to do exactly the way you say, but it does not work. I still get the same error message
The meessage I got is:
The Java RunTime Environment was not found at bin/jre. Hence, the oracle Universal Installer cannot be run. Please install JRE version 1.1.8 or higher and try again
:No such file or directory
null -
BootCamp Installer doesn't run
Hi all, I have both a Summer 2007 MacBook Pro and an Al-iMac. When trying to install BootCamp with Windows Vista SP1 (x86) using the BC package in the Apple website (v.2.1), the installer doesn't run, just as if I haven't clicked the icon or something. It happens in both computers, and it doesn't run if I install the RC of Win7 either. It only works if I use the XP32 installer under WinXP SP3 in the iMac (in the MBP it doesn't run). I can't use the Leopard Service Disk of the iMac or the Retail copy because I lost both of them, and there's no BC in the Tiger Service Disks. Both macs use OSX 10.5.7.
Is there any way to make them run or I have to use a MSP unpacker (I have found many unpackers for the MSI format, but none compatible for MSP) to get all the drivers out of the installer? Can I install the drivers by installing the Apple Software Update and downloading the packages from there? I've tried that on Windows7 but apparently it doesn't recognize the OS's version and the BC doesn't show up.
PS: I'm not very good with English, so sorry if there's any error :PHi Rorox,
the 2.0 drivers are only avaiable on the OSX Leopard DVDs.
IF you really have lost them (and not only misplaced them) you can call Apple and ask for a replacement.
Have the serial number of your Mac at hand and usually Apple will charge your with about USD 30 for the replacement.
Since the OSX DVD can also be sometimes vital for repairing errors of OSX you really should get a set.
Regards
Stefan -
Hi Experts,
Trying to Deinstall the OBIEE 11g. OUI is not launching... after digging the issue find out that "Java RunTime Environment was not found".
But Java software is available at the specified path.
"C:\DOCUME~1\user\LOCALS~1\Temp\OraInstall2013-09-05_01-10-08PM\jre\bin\javaw.exe"
Can you please help me on this... The complete error is...
Oracle Universal Installer
The Java RunTime Environment was not found at C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-05_01-10-08PM\jre\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
OK
ArjunHi Srini,
I have tried as you mentioned like installing Java in C:\Java... and I have tried the by setting the JRE_LOCATION of local path. No use of it.
tried with -jreloc and setting the java path in environment variables too.
As I understand, the problem i have seen at files copied path is not expected as required. Please see the path below...
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\bin\javaw.exe.
After running the Setup.exe -deinstall... temporary folder is creating with timestamp and all the required files are coping here...
"jre" folder also created and copied required java files directly into jre folder, but not in jre\bin folder.
folder path is like this
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\javaw.exe.
Setup application is expecting jre\bin\javaw.exe, but folder structure is created as jre\javaw.exe. There it is coming the issue.
I have even tried with copying all the files into bin folder and executed the setup.exe, it again creating a new temporary file
not able to resolve it... -
Universal Installer won't run in Linux
When I try to run the Universal Installer from the hard drive in Red Hat Linux I get the following message
Initializing Java Virtual Machine from /tmp/OraInstall2004-07-12_03-18-48PM/jre/bin/java. Please wait...
/tmp/OraInstall2004-07-12_03-18-48PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
How do get OUI to run in Linux?We reinstalled Linux per puschitz.com's instructions (ie. load the software development options), installed j2re1.4, then modified the ini file that OUI uses to point to our jre install instead of the busted jre that ships with OUI. That finally got OUI working. Thanks to everyone that replied to my inquiry :-)
-
Staging area error and universal installer does not run
Everything was ok. I installed Oracle 9i r 2, AS 9.0.2, iFS 9.0.2.
Then I uninstall AS and iFS. But AS folder remains there (with inventory,contentsXML.. folder inside), even if I deleted it, when I tried to install AS again I get the error staging area error, and the folder appears again.
Another thing is that in oracle universal installer the installed and deinstall products options do not do anything. I only can select the install option
Did I do something wrong during the AS uninstall?
What Can I do now?
Thanks for your help,Try looking here:
http://www.thomasfly.com/Oranux/#Step-by-step
follow these steps/configs and the install will go quite nice! -
Flash installer doesn't run - plz help
I download the Flash Installer and run it, and nothing happens. It is as if the program immeditately does an exit before it gets to the good part (installation!). I do not get the installation dialog, and I do not get an installation. I have tried running it as administrator, same result.
Downloading from here: http://get.adobe.com/flashplayer/
the install file I get is: install_flashplayer11x64_mssd_aih.exe (or install_flashplayer11x64_mssd_aih.exe or install_flashplayer11x64ax_gtbp_chrd_aih.exe ... not sure why different attempts gave me a different file ... the last one was downloaded via MSIE, the others Mozilla FF)
OS: Windows 7 Home Premium (64 bit)
Browser: Mozilla Firefox 11.0 (I did make one download attempt with MS Windows Internet Explorer 9.0.8112.16421 64 bit edition, same result)
I have uninstalled Flash. Actually, it seemed from the Flash debugging site that to begin with I already had the latest Flash, but Flash videos on YouTube etc were not working. So I started by trying installation (didn't work, installer didn't run), then uninstalled Flash, then tried installation again (same result). Now I have no Flash at all, and I can't install it. I have also rebooted several times and retried, no success. And I have run the installer with Firefox closed, no success.
I also just installed the Java update that Mozilla is insisting on for security reasons. That is my only guess for the initial cause of my problems, because my Flash was working yesterday (24 hours ago).This worked for the immediate problem ... I was able to run the installer and get Flash on. THANKS!
I can confirm Flash is now reinstalled here: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html. This also confirms that it is version 11.2.202.228 for Windows 7 (64-bit).
Now, unfortunately, I am right back were I started. I have Flash, but YouTube and the Daily Show tell me I need to have Flash installed and enable JavaScript in order to watch a video. Both are true, yet I cannot play a video (and I might add, the YouTube page just looks like crap, like something from the WWW of 1994).
I now have the same video playing symptoms on both Mozilla FF and MSIE.
Could it be them not me? This all worked 24 hours ago. -
Oracle Universal Installer doesn't start on Windows2000 prof. with P-4 processor
Hi all,
the problem is that when I try to install Oracle 8.1.7.0.0 EE on my computer with P-4 processor with OS WIndows2000 simply nothing happens. The installation process just starts up end exits after several seconds without any error messages.
Earlier I succefully installed the same program on the Windows2000 with P-3 processor. Have anybody encountered already such problem?
thanks for any help, IgorThank you very much. Finally some good advice that works.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Conti ([email protected]):
I had the same problem, here is what worked for me and why.
The root of the problem the that older versions of the 1.1.x jdk don't function properly on a P4. See:
http://java.sun.com/products/jdk/1.1/download-jdk-windows.html
Notice they indicate there was a problem running Java 1.1.x on Pentium 4 machines and that JDK 1.1.8_008 has a fix for it.
The problem is specifically with a file named SYMCJIT.DLL although this isn't clear from reading the java site. The 8i installer includes this file twice, search for it. The version provided with the Orcale installer is older then the one provided with JDK 1.1.8_008 even though if you inspect the properties of these various files they all appear to be the same.
Download the JDK 1.1.8_008, find this file and replace the installer versions with it and all should be well!
Joe<HR></BLOCKQUOTE>
null -
Error running Universal Installer
I downloaded Personal Oracle and unzipped it. I'm trying to run the Universal Installer but it crashes. The error message is below. Can someone tell me how to fix this?
Thanks,
This is the errror message:
JREW caused an invalid page fault in
module <unknown> at 0000:696c5c64.
Registers:
EAX=03a3fa58 CS=0167 EIP=696c5c64 EFLGS=00010246
EBX=03a3fa58 SS=016f ESP=03940000 EBP=03940020
ECX=039400a4 DS=016f ESI=816672f4 FS=31f7
EDX=bff76855 ES=016f EDI=039400cc GS=0000
Bytes at CS:EIP:
nullThis is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this? -
Getting error while running Oracle universal installer to run the deinstall
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?This is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this? -
Oracle Universal Installer not starting, failing on pre-requisites
--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
ThanksThanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though? -
Oracle 11G javaw Universal Installer error
Hey all,
I'm trying to install Oracle 11G on XP Pro and I'm having all sorts of problems. I downloaded the complete installer:
<b>Oracle Database 11g Release 1 (11.1.0.6.0)</b>
and I receive the following error when I attempt to install:
<b>The Java RunTime Enviroment was not found at bin/javaw.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.</b>
I installed JRE 1.4.2.18 rebooted the computer and tried to install again and still recieved the same error.
I checked the path to javaw.exe in the Java Control Panel and the path is there. I even disabled the one that was created with the install and still no luck.
I saw something in the fourms about the need to disable your firewall because the Oracle Installer writes to the registry. I am running Macafee and have disabled my firewall and still no luck.
Finally, back to the Java Control Panel. Under the "Java tab" --> then clicking the "view" button under the "Java Application Runtime Settings" there are two tabs, "User" and "System" that show paths for the Java software location on the system. Under the "user" tab there are two entries for the JRE 1.4 and 1.6 platforms, but only one entry (1.6) under the "system" tab, with no way for me to add a path to that tab. Please note I am using an Administrator account
Thanks for any assistanceHmmm...you downloaded the entire .zip file and checked the length?
You unzipped the file with directory structures intact?
You ran the setup file at the top of the unzipped directory strucure?
You read the installation manual and made sure all prerequisites for installation are met? -
Mandrake Linux 8.0 - can't get Oracle Universal Installer to run
Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
Mem: 525901824 116862976 409038848 0 6377472
61140992
Swap: 1069244416 0 1069244416
MemTotal: 513576 kB
MemFree: 399452 kB
MemShared: 0 kB
Buffers: 6228 kB
Cached: 59708 kB
Active: 63740 kB
Inact_dirty: 2196 kB
Inact_clean: 0 kB
Inact_target: 1072 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 513576 kB
LowFree: 399452 kB
SwapTotal: 1044184 kB
SwapFree: 1044184 kB
User Limits (in bytes except for NOFILE and NPROC) -
RLIMIT_FSIZE : infinity
RLIMIT_DATA : infinity
RLIMIT_STACK : 2093056
RLIMIT_CORE : 0
RLIMIT_NOFILE : 1024
RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck!
Maybe you are looking for
-
'Pop-up to confirm' window in full screen mode
Hi Guys In a SAP standard WDA application on clicking a link the application calls a pop-up(create_popup_to_confirm) window centered on the screen. I need to open the pop upwindow in full-screen mode. Changing/increasing size is not acceptable. Is th
-
Doubt Sync-Async Bridge:
Hi, Do we have Sync-Async Bridge and also Async-Sync Bridge in BPM ? Regards, siva
-
The only wrong thing I see in my iPod. Can anybody help?.
I love my fifth generation iPod, but I see it has an important fault: It can't remove pics and/or songs by itself. It has to be connected to iTunes to do it, Am I right?. I've got other mp3 players and they all allow to remove files directly from the
-
Datasource pool issues in weblogic
Frequently,I am coming accross this error in my weblogic server log:Any pointers on how to resolve this? any help on this Adminlog: <Oct 15, 2013 12:11:35 PM GMT> <Info> <JDBC> <EPGCRMITG1> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblo
-
How do I re-install the toolbar?
Where my toolbar should be it says that FF is not able to show the Toolbar & I should re-install it. Also, will that fix the fact that I have no heading that lists: file, edit, view, favorites, tools, help? If not, how do I fix that?