Universal Remote For Apple TV/Bose Solo/DVD Player??

Hello!!
Question's on the title, i've seen that the best remote for Apple TV is this:
LOGITECH HARMONY 700 REMOTE
Though all that said, i would have NO idea on how to set it up.
However, would it be also possible to link up the Bose Solo!? I know it's a long shot of asking, i just want to see if anyone here knows a thing or two about it!
Thanks!

I use the harmony one it control my appletv, sony tv, sony receiver, dab radio and satelite box
without any problems
one "program" it using a website in a browser or some logitech program depending on the model

Similar Messages

  • Iphone with ios6 as a remote for apple tv - song sometimes skips

    I use iphone with ios6 as a remote for apple tv but sometimes a song skips while playing. What can I do to stop this?  Very annoying as I'd like to use it for a party. Thx

    Sure.
    https://itunes.apple.com/ca/app/remote/id284417350?mt=8

  • HT3176 Apple remote for apple tv (3rd gen)

    How to use apple remote for apple tv (3rd gen)?

    Apple TV: How to use your Apple remote for Apple TV

  • HT1555 how do you connect an iphone to be a remote for Apple TV without the apple remote?

    how do you connect an iphone to be a remote for Apple TV without the apple remote?

    you can use the remote app.
    http://www.apple.com/apps/remote/

  • HT4352 I lost my remote for apple tv and would like to use my ipad mini as the remote.  Is this possible?

    I am not sure if I can program or whatever my ipad mini to use as the renote for our apple tv.  We cannot find the remote and I thought I read somewhere tht one can set up their ipad device to act as a remote for apple tv.  I could be wrong.  Maybe it means sharing some other thisngs between computers but not usinghte ipad as a remote for apple tv.  Any information abou this mater would be greatly appreciated!
    Thanks,
    scima

    Only if you've already setup home-sharing on ATV and both are on the same network.
    The remote app is available from the App Store

  • Apple TV needs a dvd player?

    Anyone else think this would be nice add-on?
    Message was edited by: djmckay

    no...
    i already have a DVD player and don't need another one and i think 99.99% of the people with an appleTV already have a DVD player too.... don't even need the one i have at this point.
    in fact i don't want anything do do with physical media at all... it's a pain in the behind.. it takes up huge amounts of room to store.. when you have lots of titles it's incredibly hard to find something to watch or listen to, kids love scratching them... when you start a DVD you have to wait for the FBI warning, commercials, menu... etc, etc it's BS... with appleTV you press play and it starts.
    i hate physical media... i got an appleTV so i don't have to deal with it... i wouldn't be willing to pay for apple to add a DVD in an appleTV that i don't need..

  • Lost remote for Apple Tv 1st generation.

    Hi,
         I've lost my remote for my 1st generation Apple TV and can no longer navigate through the menus.  Can the 1st generation remotes still be purchased. If so where??!  If not can a different remote work to navigate through the menus of a 1st generation Apple TV.  I've tried a 2nd generation remote and it did not navigate through the menus but did make the light on the 1st generation Apple TV come on when I tried to push the buttons.  I've downloaded remote apps. on my iPhone, but without the remote for the 1st generation Apple TV I was not apple to navigate through the Apple TV menus to sync up the iPhone remote app.  Any assistance would be helpful.
    Thanks
    Kevin

    Welcome to the Apple Community.
    Actually you can use the remote app to control the first generation Apple TV, but you'd need the supplied remote to set it up.
    You don't need the first generation remote, the remote for the second generation model will control either model.
    So assuming you still have your remote for your second generation Apple TV you could configure the first generation Apple TV with it to work with the remote app on the iPad and not need to buy a new remote at all. But if you do buy a new remote, the one sold in the store will be just fine.

  • Any universal remotes for the zen tou

    Looks like Creative won't budge on bringing back the FM wired remote or any new remotes for the Zen Touch. Pity- I think they would still make a profit. So does anyone else make wired remotes suitable for use with the Zen Touch 20GB?

  • I set up Apple TV & now my DVD player won't display on my TV.

    I have changed nothing about my original set-up. Cable box/DVR to TV (coaxial). Cable box/DVR to DVD player (RCA). DVD player to TV (RCA). Apple TV to TV (HDMI). And disconnecting the Apple TV box from the TV didn't fix it so whatever happened, it's not in the wiring and this also makes it even more frustrating because now I can't just go back to what it was before I plugged in the ATV box. Also I didn't change any of the settings on my TV other than hitting the button to switch back and forth from the HDMI device, unless I did it without being aware of it. The TV is still in full communication with the cable box and Apple TV works perfectly. I feel like it's something really simple and I just can't see it. Please help!

    Do check all cables are plugged in properly bot to TV and all boxes as it's easy to dislodge them.   Not sure why you need DVD player connected over RCA to both the cable box and the TV - did you used to play the DVD player through the cable box? There may be an input selection on cable box Remote to choose it.  Unlikely that the DVR can record from the DVD player - I'd expect it to only record cable, if it could record external source macrovision would probably prevent DVD from recording properly.
    I doubt it's anything specifically to do with AppleTV unless it's forcing the non-coaxial source (often labelled AV on the remote with TV for co-axial signals either analogue or digital) selection to HDMI all the time.  Have you tried unplugging HDMI?
    Check your TV manual - some TVs allow you to 'remove' certain AV inputs from the selectable list if not in use and you or someone might have inadvertently done so.
    It may be a case of disconnecting all devices and re-adding individually or one at a time to see how best to configure the non-HDMI inputs - reduce the number of potential competing variables.

  • Apple 10.7.4 DVD player has dropped clip-maker feature?

    Recently my school installed MAC OS 10.7.4. Now when I go to the DVD player for classroom use, the player's clip-maker feature is gone. Apple Help gives no answer. Am I right that thisfeature has disappeared? Thank you. Don

    Well, not "solved," but I was mis-remembering part of the problem: 10.4 did not correct the inability of DVD Player to recognize external drives -- I forgot that there was a software patch (a terminal script, I think) which allowed them to be recognized. Sorry for the trouble.

  • Replacement car adapter for insignia dual screen portable dvd player 7"

    Where can I find a replacement car adapter for our insignia dual screen portable dvd player 7"?
    Thanks

    tiggerjackson –
    I am so sorry that no one has reached out to you. Please
    give us a call at 1-888-237-8289 and asked to be transferred to Insignia
    Products. Again, I apologize for the delayed response.
    Kind regards,
    Jesus|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Correcting for PAL speed-up in DVD Player?

    I was recently given a couple of DVD-Rs with some TV shows and such, and some are in PAL format and as such, suffer from PAL speed-up, which drives me up the wall. Is there a way for DVD Player (or some other software) to correct for PAL speed-up? And if so, can it be applied to commercial DVD releases (including Region 1 discs incorrectly sourced from PAL masters)?

    Thanks Russ - Glad you spotted it... and thanks for clarifying, Mace09!
    OK - so back to some more basic stuff then. Interlacing or compression artefacts...  interlacing is often seen as a row of small spikes along edges that should be smooth - a comb like (or 'mouse teeth') effect. Compression artefacts are often blocky or pixellated areas, flickers in patches of the screen. Both could be present.
    Have you checked the field dominance as well? You say your source is DV... is it set as lower field dominant?
    How long is the footage? Have you tried encoding a short section at a different setting... and are you using AC3 audio?

  • Burning home movies for use on a regular DVD player

    Can anyone recommend software, preferably free, I can use to convert avi home movies to be able to be viewed on a standard DVD player? I have dvd-r disks, just not sure on what settings or software to use in order to burn them.
    Thank you.

    Yes, but iDVD originally came with your Mac if you've purchased it in the past five years or so; that version should still work, but if it's missing you would need to reinstall it from the Software Restore disc that originally shipped with your Mac, not a Mac OS X install disc.

  • How to upgrade First Generation Touch to use Remote for Apple TV

    Hello and thanks in advance.
    Can anyone tell me how to upgrade the OS for a 1st Generation iPod Touch so that it can use the Remote App from I tunes to control the Apple TV device. It needs to be the 3.1.2 version, but Apple seems to offer only 3.1    I found the 3.1.2 version on a non-apple site and attempted to download and install it but it didn't work out. (Error 14). I was expecting to control the TV with my 1G Touch and am a little disappointed with Apple that the older Touch units seemingly cannot do this.  Any help appreciated.

    You can buy 3.1 thru iTunes then use it to upgrade to 3.1.3.
    http://support.apple.com/kb/HT2052

  • Remote for apple tv won't work

    remote will not work

    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Maybe you are looking for

  • Odd graphic in mail headers

    My sister is seeing an odd image when examining the headers of a received email. When her mouse rolls over an area (I guess where address book info links are) then this huge circle appears. Its a powder blue circle with a small, white, downward point

  • Loading AVI file. into Elements 8

    I am using Primier Elements 8 on a PC running Vista.  I am trying to load and edit  a 1.9 G AVI file that contains video and audio in Elements 8.  When I load the file into Elements I get a video track that has the video but the  audio track that doe

  • What is the program to replicate the locations from R/3 to EBP in EBP 3.0 v

    Hi All, Can you please tell me the which program to replicate the locations data from R/3 to EBP in EBP 3.0 version. It is very urgent. Points will be revorded Regards, Ram

  • Adobe Acrobat repeatedly asks me for my license, but then doesn't allow me to sign in

    I had to uninstall and then reinstall Adobe Acrobat Pro due to a problem I was facing. Upon reinstalling it, I had a choice as to whether to enter a license code or continue with a trial that would expire in 32,767 days. I opted for the former, but b

  • Cany you link a combo box to a submit form button?

    This question pertains to Adobe Acrobat 9 Standard. On my form, I have a combo box that lists 5 names and a button that I want to use to submit the form via email.  Based on the combo box selection, I want the submit button (when pressed) to submit t