Universal Track Mode On or Off?

I just read through the Universal Track Mode section(s) in the manual, but am still very much trying to wrap my mind around this subject and obtain a better, more thorough understanding of this particular dynamic and how it relates to a project. Can someone help me with the pros and cons/applications of UTM in the on and off mode?
I know this is a very general(ish) question, and I'm sorry I'm not providing some more specific direction here. This question is more of a starting base from which will hopefully spring a discussion that will help provide me and all others who are interested in this topic a fuller understanding of Logic's UT mode .
Thank you very much all for all your help,
Javier Calderon

Hi, Yildox. Isn't the default itself UTM? i.e. activated, as opposed to NOT activated? As far as I know, UTM allows you to choose an individual track as being stereo or mono. If UTM is not activated, then the track is set to mono, and if you set it to stereo, then it seems to use the NEXT track - regardless if there's any audio region in it or not - as it's next audio channel.
Do a search under Universal Track Mode in the Logic user manual, and it will give you a little bit more info on it.
And what kind of problems are you having with split stereo channels?
Oh . . . and thank you Bee, for the help. As far as I'm concerned, that pretty much settles that. I'll stick with UTM activated and just leave it at that.

Similar Messages

Universal Track Mode? off is the only way to make a bus (stereo) ?

Is Universal Track Mode? (Off)unchecked, the only way to make a bus (stereo) ?
In logic 9 is this the case?
Can someone out there verify this please? Or am I just missing some thing?
If Universal Track Mode is (ON)checked in the audio preferences tab, all of the bus sends in the send section and the bus output choice in the channel strip output section are only mono?? thanks for any reply.

I've been using UTM On (the recommended choice) since Logic 4.x and my busses have always been stereo, just fine.

Where is universal track mode

hey guys, where the **** is universal track mode in logic x? i cant see it anywhere
thanks

UTM can no longer be disabled in LPX.
If you are trying to split Stereo files you may find this of use...
Logic Pro X: How to separate left and right channel from a single audio file

No stereo input in logic8, analog or digit., when not in universal track m.

till now , in logic7 , I didnt work in Unversal track mode. When upgrading to logic8 ,its not possible to create a stereo input, analog or spdif,. When I try to record , I cannot see the waveform in arr. window, but when I stop rec. , the record is done. There is no problem in universal track mode,
but I dont want to change because of my older songs. Is there a solution ?
Message was edited by: ernesto e.

With UTM disabled, only the odd numbered tracks can be made stereo. This is because for a track to be a stereo track with UTM off, it needs the even numbered channel beside it.
If you click on the circle at the bottom of an odd numbered track (1, 3, 5, etc...), making it a stereo track, look at the even numbered track beside it. It no longer exists, because it has now been put to use as the "right" side of the stereo image.
I'm wondering if this is what you are experiencing, and getting confused by...?

Universal Repeater Mode with Airport Express

Hi all folks,
is something like the universal repeater mode with the new Airport Express 802.11n (2nd) available.
Today I use a Airport Express in the Client Mode to connect to a WLAN and I connect my Mac to the Ethernet Port and the Airport is in Bridge Mode.
This works nice and became available with the AirPort Express 802.11n, my AirPort Express 802.11g can't do this.
On the other hand, I'm interesting in connecting some Macs to the "foreign" WLAN, but all the time I use "Join a wireless Network", I got "Internet Connection" with "Connect Using" "Wireless Network" and "Connection Sharing" "Off (Brifge Mode)" only (same with "Extend a wireless network").
In "Participate in a WDS network" and "WDS remote" the Options for "Connection Sharing" are "Off (Bridge Mode)", "Distribute a range of IP addresses" or "Share a public IP address".
Maybe I'm wrong, but why I can't use this "Connection Sharing" Options with "Join a wireless Network", the Client Mode, too.
In the Bridge Mode I can't separate the two networks well.
Any suggestions,
Lutz

The "Connection Sharing" option basically controls the base station's NAT & DHCP functions. By default, Connection Sharing = Share a public IP address. This would enable both NAT & DHCP. When "Distribute a range of IP addresses" is selected, DHCP is enabled, but NAT is disabled. Finally, for "Off (Bridge Mode)," both NAT & DHCP are disabled.
Now depending on which Connection Sharing option you choose, the options for Wireless Mode will change as well. These are all pre-designed by Apple for the most common uses for their base stations for simplicity.

Upgraded BB 8330 to ver 4.5 and BlueAnt Z9i doesn't go into voice isolation mode or shut off

The subject line says it all...
Upgraded BB 8330 to ver 4.5 and BlueAnt Z9i doesn't go into voice isolation mode or shut off.
I don't know if the two problems are related or mutually exclusive.
Thanx,
um

Exact same machine, exact same problem!
I use mine for DJing - and as you can imagine this isn't the time of year for this to happen - pick up a new pro on Tuesday.
However if there's a fix, it'd be nice to have a back up machine ( I never thought I'd need one to be honest)
I've looked on the net and most people are saying GPU issues.
Gonna strip it down and take the logic board out. Might look at reflowing it ( got nothing to lose) or see if I can track down a logic board (although buying a new MBP was probably a cheaper option!)
Cheers
Jeff

Macbook spontaneously goes into sleep mode and screen off mode

Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
Any ideas as to how I might rectify the problem? Thanks very much in advance,
Danny

When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

My iphone 4 (ios 6.1.3) cant recive ore make calls network is ok....i tried everything restore from itunes mode plane on off removing sim restoring network...

My iphone 4 (ios 6.1.3) cant recive ore make calls ...network is ok is full...i tried everything restore many times from itunes....mode plane on off ....removing sim ...restoring network...hard reset..(call waiting is off and i can't do it on)

The OP is correct, I have done many tests. With IOS6 there appears to be a dns issue in some cases with IOS for both ipad(2) at lease (my wife won't let me upgrade here v1) and the iPhone4s in my case. Pretty easy to diagonse, I wish Apple would fix it.
1.) I use a Juniper 5GT wireless firewall and all of my other devices (many apple, ipad, MBP, iMAC,3 ipods etc) are fine: Not ipad2 or iphone4s running IOS6
2.) after upgrade nothing worked. narrowed it down by messing with dns (I have my own dns server)
3.) Strange thing; dns works over MiFI (Verizon) and Carrier
4.) confirmed that it is a dns and not network issue.
-down load free tool called ping-scope-lite. (obviously you need to turn off wifi to do this)
http://itunes.apple.com/us/app/ping-scope-lite/id431500107?mt=8
turn on wifi
- ping Level3 dns server 4.2.2.2 or Googlesdns servers 8.8.8.8 or 8.8.4.4 these worked.
-now ping by name google.com or ipchicken.com
- try others; same result.
Apple did say that they would give me another iphone 4s: I just wasn't sure that would fix my issue. I tried downgrading to 5.1.1 but I got an error saying my device wasn't able to do so (tried even blocking itunes from contacting Apple) I whis this could be fixed. I did even have it working using my own dns server but now I can see that my phone over wifi isn't even trying to make a dns request now.
Stuck

Not able to access Safe Mode nor boot off of Tiger DVD

I am running an iMac with Tiger 10.4.11. After doing an update of software I cannot boot. I have not been able to access Safe Mode or boot off a Tiger DVD. With DVD inserted I wait till I hear the bong noise then I press the letter C. It thinks for a few seconds then spits the DVD out. I am able to see the contents of the DVD when I insert into my PowerBook running Leopard. This DVD is not the same one that was used to install Tiger. The Tiger DVD is in excellent shape.
I have reset the PRAM.
I was able to access Single User Mode. I ran /sbin/fsck -fy and it found no problems.
I was able to access the iMac in Target Disk Mode. I deleted .plist files that were dated on July 2nd, the last day it worked. But when I restarted it I received the same response. Apple icon with a spinning circular wheel.
I deleted the following files:
* com.apple.kernelcaches (a folder in /System/Library/Caches)
* Extensions.kextcache (a file in /System/Library)
* Extensions.mkext (a file in /System/Library/)
* com.apple.ATS (a folder in /Library/Caches/)
* com.apple.loginwindow.plist (a file in /Library/Preferences/)
* Files that start with com.apple.LaunchServices (in /Library/Caches)
Is there any thing else I could do in Target Disk Mode that would be helpful?
Any suggestion on how I might be able to fix this problem would be appreciated.
Thank you for looking.

Well, kicking out the Disk on boot is generally one of two things... bad optical, or the HD Driver munged early on.
If the Power book boots off that Install Disk, I'd put the iMac into Target mode, try an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120

How to get Motion Tracking Mode to work?

How do I get "Motion Tracking Mode" to work? I click the icon and nothing happens, its like greyed out.

scouterbsa
Here is my check list for you to review regarding using Motion Tracking Mode in Premiere Elements 10 on Windows 7 64 bit.
1. You need a video and with enough motion in the object in it to track it. Color contrast between the object and its background can be important to success.
I created a DV AVI 4:3 in which I have a circle moving, and I have used a butterfly Clip Art from Premiere Elements 10 to track to track the circle as it moves in the video. In this example, you see the object only at 0 time.
2. Select/highlight the clip on the Timeline. And then click on the Motion Tracking Mode icon above the Timeline.
You should next see the following Motion Tracking dialog asking for a Yes or No to the question "Run
Auto-Analyzer to track moving objects?" Click No.
3. At this point, you will see a bounding box on screen. That bounding box should be placed using the mouse cursor on the object
that is going to be tracked, in this case, the circle. Resize and position the bounding box accordingly.
4. Once you have the bounding box on the object and resized, click on Track Object at the top right of the monitor.
The screenshot below shows only the before clicking Track Object at the top right of the monitor.
When that action is finished the bound box edges will be an orange yellow color. I have skipped over a screenshot
for the latter.
5. With the orangel yellow bounding box in place, next drag the Clip Art (in this case, Butterfly 02) from the Clip Art display area toward and into the orange yellow bounding box frame. The orange yellow bounding box frame will turn blue. That is the first sign of success.
Hit the Enter key of the computer main keyboard and watch the results. The Butterfly should track the circle's
movement in the clip. The duration of the clip and the continuity of the object's motion in the clip can be other factors.
If you do not succeed, try again with a different video clip (one with more movement and color contrast.
The above is a best case scenario. If it is speech bubbles that you are having problems with as well, we will deal with them next.
Right now it seems like you are having problems getting started rather than having a problem with a specific Clip Art that you are
using to track the object in your video.
We will be watching for your results.
ATR

How do I fill a gap with silence, at the beginning of a track, in multi-track mode?

Hey everybody!
I have 2 tracks in multi-track mode ... one is Music and the other is Vocals. The music starts at the beginning and lasts 3 minutes. The vocals don't begin until 10 seconds into the music. I need to insert silence in the beginning of the Vocals, because I will be sending both tracks to a producer and I want the tracks to line up from the beginning. Otherwise, they will have to line up my vocals.
Thanks for any help. :-)
Joe

I would just line the vocal track up by sliding the appropriate amount and then right mouse click and bounce that track down to another track and send that one as it will have that 'silence' embedded into the start.

Dark Mode not turning off

OS: Yosemite
Model: MacBook Pro (Retina, 15-inch, Late 2013)
Issue: Dark Mode not turning off
Anyone else have an issue turning off dark mode? Mine isn't turning off. I uncheck the option in General, but nothing happens. When I close and reopen General preferences the option is once again checked.
I added a screenshot.
Message was edited by: DDeVito

I have a weird sleep issue that just started, I've built a new PC, Win7x64 and just noticed this happening. When I put the computer to sleep manually, the machine looks like it goes to sleep, but the fans keep running and it 'sounds on'. If I wake the PC,
then put it right back to sleep, it goes into deep sleep and the fans go off. Nothing I can see is keeping it awake, I have a i5-2500k, Asus P68 deluxe mobo, and it seems to be a repeatable issue. If the PC wakes up by itself to do something, then goes back
to sleep on its own (times out) it goes into deep sleep. It's only when I manually do it that it has the issue. Anyone ever seen this? Thanks!
/curt
Curt Kessler Franklin Loan Center
I had the same issue a while ago. It ended up being because I added my network printer to the printers folder by clicking 'add a network printer' rather than 'add a local printer'.
When I added a 'local' printer (and pointed it to the IP Address of the printer) the sleep issue went away. Both methods (network/local) were able to print to my network printer, but the network printer option would result in my fans never spinning down.
Weird, right?
-Kramy

Nokia 500 Problem with Tracking mode and touch sc...

Hi,
I just bought Nokia 500 and I am having lot of problem
1. When I use navigator..it should be in tracking mode not in browing mode so I can see where i am going on where is the turn. But as soon as it calculate the route, withing few second it automatically comes in browsing mode. Even if I press back arrow on left bottom corner it again shows browsing mode. However, sometime it's working fine and always display tracking mode. I am not sure how to switch between the mode. As per manual, I need to hit the back arrow left bottom corner but that does not work for me.
2. The second problem is really bad. The touchscreen response is slow. It looks like the processor is slow. Particularly if I go to Setup menu..it automatically goes to system. I just touch Setup on main menu and sometimes it automatically goes into system. If I manually go to system..it automatically goes to About ..menu. It just behaves randomly..I have done screen calibration many times. but still issue is there. Also, when I got to keyboard to enter address..it automatially press Q key. Not sure what's wrong here
Anybody please suggest me what's wrong. Do I need to replace it with nokia?

Hi
Night mode is designed to work without flash. So either use flash or night mode, but not both.
Cheers
Gryff
------ N78 -------

Motion Tracking Mode - does this do the "highlighting" I'm trying to do?

I read through the Adobe tutorial/help for this feature. It sounds like this will do the "highlighting/shadowing" of a football player that I'm trying to do.
Has anyone used this feature?
I got some great instruction/suggestions regarding this yesterday (Hunt - your link was very thorough -- but with my low patience tolerance + ADD, I couldn't quite wrap my head around it at 2am!!).
So -- again, Motion Tracking Mode? Any feedback on the feature?
Thanks again to everyone here -- you are a wealth of knowledge and friendly help!
Kim

That "arrow method" is one that I cover in this ARTICLE. It can be very effective, and takes far less work than the Track Matte Keying of various Effects. The latter can be very powerful, visually, but does require more work to accomplish.
Good luck, and do check out Muvipix. Lot of good articles, threads, Assets, and more, plus there are a lot of great people, who do not hang out here. Their Community is more varied, and many do not use much Adobe in their various workflows, so it's a great resource, when working outside of the Adobe programs. There are also several subscribers, who to a lot of academic athletic work, so they know some neat tricks.
Hunt

Tracking mode for RMAN

Hi,
I want to use tracking mode for rman.
I have created my tracking file to store modified blocks.
The first time i run a backup incremental level 0 and after i create a table.
The second backup is an incremental level 1 and all my datafiles are backuped.
I d'ont understand why.
Thanks

How many datafiles do you have ?
If you create a table:
- Oracle writes into the dictionary (SYSTEM tablespace): related datafile is updated
- Oracle writes into the tablespace used by the table: related datafile is updated
- Oracle writes some undo information for the dictionary update in the UNDO tablespace: related datafile is also updated.
And you may have some internal background transactions that could also update the SYSTEM and UNDO tablespaces.

Universal Track Mode On or Off?

Similar Messages

Maybe you are looking for