Universe Design and QAAWS interface with Xcelsius

Hello,
I need to find out that if I have a universe given to be in a zip file, (assuming that the database is not available with it on the same machine.)
I need to publish the universe on the local serverver. (using file export option)
Then I use QAAWS to select the universe and recognize it by using the ADD CONNECTION etc
Can anyone describe the steps of making sure how to access the universe from the xcelsius using QAAWS..
Are there any example of drill down using QAAWS and BO universe.
Any suggesstions will be helpful
Thanks
Abhijit

Hi Abhijit,
I built and publish several demos on the Semantic Layer including QaaWS and XCelsius consumpiton.
Please have a look on this link: [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70919833-6682-2b10-9a93-9d984e1f3bda]
Didier

Similar Messages

Hi, I have a CS6 design and web premium with the product number. I need the serial number to activate my product. Where can I get it please?

Hi, I have a CS6 design and web premium with the product number. I need the serial number to activate my product. Where can I get it please?

Yes i did! with the prrof of the payment etc...
Kind regards
Meilleurs salutations
Mit freundlichen Grüssen
De Oliveira Claudia
2014-11-21 16:21 GMT+01:00 Beverley Gray <[email protected]>:
Hi, I have a CS6 design and web premium with the product number. I
need the serial number to activate my product. Where can I get it please?
created by Beverley Gray <https://forums.adobe.com/people/Beverley+Gray>
in Downloading, Installing, Setting Up - View the full discussion
<https://forums.adobe.com/message/6951051#6951051>

Can i download google map and then interface with labview?

i intend to interface labview with google map and indicate my required position on it.i need help on how to accomplish this?can i download google map and then interface with labview?

Hi,
The Example avalable on following link (C:\Program Files\National Instruments\LabVIEW 2009\examples\comm\axevent.llb\ActiveX Event Callback for IE.vi) on your PC, and using of Googlr map API u can indicate your position.document are avalable on following link (http://code.google.com/apis/maps/documentation/staticmaps/)
I hope this is help for u..
Siva
Sivaraj M.S
CLD

Is to possible to control a motor by using fuzzy logic toolbox in Labview and motor interfaced with PIC microcontroller

sir
I am doing a PG project on fuzy logic control of robotic arm,In this first i need to write a code in LABVIEW fuzzy toolbox and interface that that code with PIC where motor is connected and a tachogenerator should be connected to motor to send speed to LABVIEW through PIC microcontroller where ADC is inbuilt in it.
Please help sir me whether it is possible to do that ,if not tell me do i require any interfacing device ,I am very new to labview

Now for this problem, Fuzzy can be easily used to control the plant. Here is the softwares that would help in this task:
- LabVIEW Full Development System (FDS) 2009 or later - The is the LV version that allow you accessing the latest Fuzzy Logic develoment
- LabVIEW PID and Fuzzy Logic Toolkit 2009 - This has PID and Fuzzy Logic functions available for you to develop your controller
- LabVIEW Control Design and Simulation Module 2009 - This is a complete set of functions that allow you to simulate and develop advanced control applications. In your case, you probably will be using this module for simulation of the DC motor.
Now, you also will need a way to read the encoder and control the voltage applied to the motor. You have several options from NI for that process. Probably a multi-function Board could help since they have digital counters and Analog Output signals. However, I can't recommend what would be best for this application, but the ideal platform is the CompactRIO platform for your application. They have a Real-Time controller and integrated Input/Output modules with signal conditioning that could allow you to directly drive the DC motor. I would advice to go to our webside (http://www.ni.com/compactrio/) and verify what this platform does. For this platform, you will also need the following sofrware:
- LabVIEW Real-Time Module 2009 - Allow you to develop you application in Real-Time for deployment.
Hope this helps.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Is a stand alone Lightroom compatible and will interface with a cloud PS?

I've been using stand alone versions of LR5 and CS6 and want to convert to the cloud. I am told that there will be conflicts if there is a stand alone and cloud version of LR. True or not? and, will a stand alone LR5 interface with a cloud PS

there is one, just search with spotlight "Calculator".
It works great!
Hope this helps.

APP and Bank interface with IDOC

Dear Friends,
We are in process of interface between APP with Bank for processing the Bank payments.
Need a clarification that is it ok if I can use the IDOC instead of using DME standard program to move file to Bank server and also want to know that is it ok for processing the IDOCs for APP documents.
Kindly provide the broader view of pros and cons for above query.
Thanks MD.

IDOC is also a standard way and recommended approach. You can generate it via RFFOEDI1.
Just check that your bank is able to process the IDOC file in standard format (like PEXR2002 format)
Regards,
Gaurav

SSO does not work in Universe Designer

Hi,
I have a problem getting an error within Universe Designer the error is :
"DBD: Unable to connect to SAP BW server Incomplete logon data"
Installed below :
BOBJ XI 3.1 installed
SAP GUI 7.10
SAP Java Connector
SAP Integration Kit
All is run on the server machine.
SSO setup i CMS etc. and i works fine in the beginning and i can go into Universe Designer and create a SSO connection which responds etc. and i can create universes which is fine. I can go to webi and create an new report using the universe and select som measures and dimension and execute query, but it only works a couple of times then it starts to fails with an xml error. After that going to universe designer an into connection i cannot longer get in touch with my Bex query in SAP BW ! and that is where my problem allways ends, so now i cannot connect using SSO in Universe Designer.
Found technote 1250890 but it only says that i need to install integration kit on my client, but my installation is all i one and is installed.
Any suggestion would be much appreciated !
Rgds,
Kim

Hi,
I've had this problem to . I found information in trace log by SAP BW side
A Error Code CALL_FUNCTION_SIGNON_INCOMPL.
A Module $Id: //bas/700_REL/src/krn/rfc/absignon.c#9 $ SAP.
A Function isignon_do_it Line 177.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RFC
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]

Swift Net MT-103 Interface with SAP

Hello all,
I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
3)What will be the steps I need to take on the config side?
4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
5)DME will be only solution that produce this format?
6)Please provide me the File structure of MT103?
I would appreciate your prompt response since I need to represent this to the client.
Thanks

Hi
It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
Hope that this helps
taro

Control Design and Simulation palette doesn't appear

I'm using LabVIEW 2009 in Professional License. I've installed Control Design and Simulation Module with its all other required Toolkits. The problem is that Control Design and Simulation palette doesn't appear in the Functions Palette in any VI. Please help me with that.
Adeel Amin
NED University of Engineering & Technology
Solved!
Go to Solution.

If you run NI License Manager, Expand LabVIEW2009>Modules>Control Design and Simulation.Can you verify that you have that directory and what is the color of the cube right next to it?
Andy Chang
National Instruments
LabVIEW Control Design and Simulation

Firewall/Switching/VLAN Design and Security considerations

Hi,
Consider the following:
/SW3---|
External--S1--FW---/ |Subnet 1
| \ \ |
| \__\SW4---|
| /\
| / /SW5--|
External--S2--FW-/ |Subnet 2
\ |
\SW6--|
Requirements:
Router/Switch/Firewall/NIC resiliency. We can pretty much cover this with HSRP/redundant links(STP)/HA between firewalls/ and (HP) NIC Teaming.
Question:
Is it unreasonable to have SW3-SW6 physically on the one switch due to lack of available ports?
I take it this wouldn't be the securtiy purists choice of implementation?
If it is reasonable/doable, what are the features on IOS on switches eg. 2950's to implement this?
Any help appreciated.
Thanks
Mark

You can configure network security by using ACLs by either using the Cluster Management Suite (CMS) or through the command-line interface (CLI). You can also use the security wizard to filter inbound traffic on the Catalyst 2950 switches. Filtering can be based on network addresses or TCP/UDP applications. You can choose whether to drop or forward packets that meet the filtering criteria. To use this wizard, you must know how the network is designed and how interfaces are used on the filtering device. For more information refer to following url:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a008007e8ed.html#36127

Seeing 3.x Universe Connection and Not 7.0

We have SAP BW 7.0 and BOXI 3.0 with the Integration Kit.
When we attempt to create a universe connection it asks for 3.x.
Shouldn't we see a 7.0 connection?
Mike

So, I'm guessing that you are saying that there is not a 7.x connection.
Just so we are clear I was in Universe Designer | Tools | Connections.
then with the wizard I selected:
Add | Next | and I see the "SAP" connection, decompose it to "SAP Business Warehouse 3.x", decompose it and select "SAP Client".
So since I have the SAP 7.0 sp18, Int Kit, BOXI 3.0, sapgui 710 I was expecting to see "SAP Business Warehouse 7.x", but you are saying it is not out yet.
Thank you very much.
Mike

The difference between IEEE802.1Q Native VLAN sub-interface and Physical interface?

Hello
I think the following topologies are supported for Cisco Routers
And the Physical interface also can be using as Native VLAN interface right?
Topology 1.
R1 Gi0.1 ------ IEEE802.1Q Tunneling L2SW ------ Gi0 R2
R1 - configuration
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
ip address 10.0.0.1 255.255.255.0
Topology 2.
R1 Gi0 ------ IEEE802.1Q Tunneling L2SW ------ Gi0 R2
interface GigabitEthernet0
ip address 10.0.0.1 255.255.255.0
And is it ok to use the physical interface and sub-interface with dynamic routing such as EIGRP or OSPF etc?
R1 Gi 0 ---- Point to Multipoint EIGRP or OSPF ---- Gi0 R2 / R3
Gi 0.20--- Point to Point EIGRP or OSPF --- Gi0.10 R4 (same VLAN-ID)
R1 - configuration
interface GigabitEthernet0
ip address 10.0.0.1 255.255.255.0
interface GigabitEthernet8.20
encapsulation dot1Q 20
ip address 20.0.0.1 255.255.255.0
Any information is very appreciated. but if there is any CCO document please let me know.
Thank you very much and regards,
Masanobu Hiyoshi

Hello,
The diagram is helpful.
If I am getting you correctly, you have three routers interconnected by a switch, and you want them to operate in a hub-and-spoke fashion even though the switch is capable of allowing direct communication between any of these routers.
Your first scenario is concerned with all three routers being in the same VLAN, and by using neighbor commands, you force these routers to establish targeted EIGRP adjacencies R1-R2 and R1-R3, with R1 being the hub.
Your second scenario is concerned with creating one VLAN per spoke, having subinterfaces for each spoke VLAN created on R1 as the router, and putting each spoke just in its own VLAN.
Your scenarios are not really concerned with the concept of native VLAN or the way it is configured, to be honest. Whether you use a native VLAN in either of your scenarios, or whether you configure the native VLAN on a subinterface or on the physical interface makes no difference. There is simply no difference to using or not using a native VLAN in any of your scenarios, and there is no difference to the native VLAN configuration being placed on a physical interface or a subinterface. It's as plain as that. Both your scenarios will work.
My personal opinion, though, is that forcing routers on a broadcast multi-access segment such as Ethernet to operate in a hub-and-spoke fashion is somewhat artificial. Why would you want to do this? Both scenarios have drawbacks: in the first scenario, you need to add a neighbor statement for each spoke to the hub, limiting the scalability. In the second scenario, you waste VLANs and IP subnets if there are many spokes. The primary question is, though: why would you want an Ethernet segment to operate as a hub-and-spoke network? Sure, these things are done but they are motivated by specific needs so I would like to know if you have any.
Even if you needed your network to operate in a hub-and-spoke mode, there are more efficient means of achieving that: Cisco switches support so-called protected ports that are prevented from talking to each other. By configuring the switch ports to spokes as protected, you will prevent the spokes from seeing each other. You would not need, then, to configure static neighbors in EIGRP, or to waste VLANs for individual spokes. What you would need to do would be deactivating the split horizon on R1's interface, and using the ip next-hop-self eigrp command on R1 to tweak the next hop information to point to R1 so that the spokes do not attempt to route packets to each other directly but rather route them over R1.
I do not believe I have seen any special CCO documents regarding the use of physical interfaces or subinterfaces for native VLAN or for your scenarios.
Best regards,
Peter

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

SSO doesn't work with Xcelsius using QAAWS, outside Infoview

Hi,
We have some xcelsius dashboards using QAAWS to retrieve data from database
I would like to know whether SSO works with xcelsius dashboards using QAAWS outside infoview.Currently we get login screen to enter username/password.we are using Windows AD as the authentication type in the environment.

You got it right. Within the InfoView, your Xcelsius-swf gets the CELogonToken as a parameter field to authenticate against the data for example. If you access another Xcelsius-Dashboard from within a swf you can even pass the LogonToken on.
Using dashboard and QaaWS outside of InfoView, the user will have to enter username and password before the data is fetched. At least that is the way it works here.
Regards,
Peter

Universe Design and QAAWS interface with Xcelsius

Similar Messages

Maybe you are looking for