Universe design creating measure issue

Hi All,
I created measure in an universe and exported to WEBI. While running WEBI report with the universe, it is giving invalid data, Instead of displaying values it is displaying #DATATYPE.
Thanks,
Poorna

Hi Poorna,
Can you please try to change the datatype of object at database level. Please check the data type at the universe level as well and cast it to number even if it's datatype is number.
Please try this and let us know if you face any issue.
Sahil

Similar Messages

Unable to find BW Query while creating connection with universe designer

Hi colleagues,
I've got BOE XI 3.1 SP2, Integration for SAP 3.1 SP2 and the following inssue )
Some of BW queries that were previously released for external access and succsefully used for WebI reports now cannot be find while creating a connection in universe designer. Those are still releasde for external access but I'm not able to find some of them in the list, tried search as well.
Has anybody faced the same problem?
Thanks

Hi Ingo
SAP GUI               710 Patch 15
BI Components      7.10 Patch 1001
BW 3.5 Components     3.50 Patch 6
Actually as I figured out there were some reasons to manualy set req.status to 7 for that info-provider
I used massive regeneration for needed queries eventually,
BR Max

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

How to remove the negative sign in universe designer?

hi all,
have used BEX query designer first to create the query, for the key figures, i have choose 'reverse sign' option and in the BEX analyzer report, it showing correctly with the figure having 'reverse sign'.
however, the 'reverse sign' was not being carried over to universe designer when i tried to create a universe from the BEX query created earlier on. how do i find the option to 'reverse sign' in universe designer for the key figures?
pls help.
thank you.

Hi,
i tried creating new 'measure' object with function 'sum', in the select statement, how should add in the multiply by -1?
i tried typing this -> @Select(Marginal Profit\Marginal Profit) x -1 in the Select box but it failed during the parse part.
FYI, the 'marignal pofit' above is the original 'measure' object that i want to have its negative sign reversed.
pls help.thanks.

SSO does not work in Universe Designer

Hi,
I have a problem getting an error within Universe Designer the error is :
"DBD: Unable to connect to SAP BW server Incomplete logon data"
Installed below :
BOBJ XI 3.1 installed
SAP GUI 7.10
SAP Java Connector
SAP Integration Kit
All is run on the server machine.
SSO setup i CMS etc. and i works fine in the beginning and i can go into Universe Designer and create a SSO connection which responds etc. and i can create universes which is fine. I can go to webi and create an new report using the universe and select som measures and dimension and execute query, but it only works a couple of times then it starts to fails with an xml error. After that going to universe designer an into connection i cannot longer get in touch with my Bex query in SAP BW ! and that is where my problem allways ends, so now i cannot connect using SSO in Universe Designer.
Found technote 1250890 but it only says that i need to install integration kit on my client, but my installation is all i one and is installed.
Any suggestion would be much appreciated !
Rgds,
Kim

Hi,
I've had this problem to . I found information in trace log by SAP BW side
A Error Code CALL_FUNCTION_SIGNON_INCOMPL.
A Module $Id: //bas/700_REL/src/krn/rfc/absignon.c#9 $ SAP.
A Function isignon_do_it Line 177.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RFC
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]

DECODE SQL Function - Parsing error in Defining Objects in Universe Designe

Hi,
I have created a class and an object in BO XI R3 Universe designer.
I am getting the parsing error while defining the object when using the custom SQL as
select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu
The object Type is "character", i have tried with Long Text, Number, Date as well and the same sql works fine by returning String values through TOAD.
Do we have any constrains in using DECODE in BO XI R3 or any other syntax please....
Please guide me in resolving this issue.
Thanks,
Karthik.

Hi,
1.At back end check the data type for matteraction column and define it accordingly in object definition.
2. Try to break your select clause definition into smaller parts and check it where the exact issue is as below
i.select decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019) ............
ii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE') ..........
iii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu

Error when setting up connection from Universe Designer to Oracle database

Hello,
I am attempting to create a connection to an Oracle 10 database in Universe Designer. I am currently running Business Objects XI 3.1 SP3 on a 32 bit machine. I have the Oracle client installed. In Universe Designer when I attempt to create a new connection using the Oracle 10 client I receive the following error.
CS:DBDriver failed to load : C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (The specified module could not be found.)
The dbd_oci.dll file does exist in the directory listed above. Has anyone encountered this issue?
Thanks in advance.
Brock

Hello Brock,
Do you have multiple SQL clients installed on your system? If so, uninstall the previous versions. Check if the PATH variable is set to correct bin path and then try testing it again.
Regards,
Sanjay

Universe Designer: Error getting dimensions for cube

-Using Business Objects Edge 3.1 SP2
-SAP BW 7.0 (patch level 21)
This is quite odd behavior that seemed at first an authorization issue, but now I am uncertain.
-Attempting to create a Universe based on a Infocube.
-Universe connection is created with no problem using user 'ABC'
-Using Universe Designer on the BOBJ server, no issues creating the Universe
-Using Universe Designer on a users desktop, the Universe fails to create with error message:
A runtime exception has occurred. (Error getting dimensions for cube $0SD_C03 (catalog $INFOCUBE): Unknown error)
-Change the connection to use user 'DEF', the Universe creates just fine on the desktop
-Behavior is not exclusive to one BW object, happens no matter what 'ABC' tries to access from this desktop
So, at first I am thinking authorizations, but then the universe create would fail on the server as well. If it is environmental, what could possibly affect this behavior.
Any ideas before I submit to SAP Support?
Edited by: Kevin Smolkowicz on May 5, 2010 12:40 PM
Edited by: Kevin Smolkowicz on May 5, 2010 12:41 PM

Oddly enough it was an authorization issue.
When authenticating against the SAP source system from Universe Designer on either the workstation or server, both traces show a missing authorization for RFC_NAME = RASB
This setting is not found in referenced SAPu2019s guides or whitepapers under suggested authorizations for Universe create. What remains unexplained is why using the same credentials from 2 different computers had a different response.

Complex things in universe design

what all the complex things which you faced in universe design?
thanks in advanced,
krishna

Hi,
Are you creating universe on the top of SAP query or some Database?
There are so many things and hurdle one faces when creating universe.
There could be formula issue, tbale join issue and various others.
What issue you have?
You go to following universe sdn forum to see what issues users are experiencing.
[Semantic Layer;
Regards,
Bashir Awan

Universe design for SAP BPC (MSAS cube)

During the designing of a Universe on top of a MSAS cube there is the moment I may select Dimensions & Hierarchies. Here there are ID's of my model, e.g. Accounts-Lev1, Time-Lev1, etc.
How do I get to see the descriptions of the levels in the Universe Designer?
Screenshots:
http://s772.photobucket.com/albums/yy7/Thijxx/

Hi SR,
In some way is true what you think, is important to put effort and intelligence in design very well the Bex query also the BW solution.
But the effort is not only there, you can improve that with a good Universe creating MDX Measures, changing the BW names (Dimensions and measures) for other more comprehensives for the users, change and reorder the classes and dimensions to be more close to user concept, create new hierarchies and others.
Don't forget that the Universe is a semantic layer to hide complexity and is useful for:
- Map complex data into familiar business terms such as products, customers, and sales.
- Enable simple, intuitive, and self-guided data analysis.
- Guarantee single version of the truth (identical results) no matter what tool is used)
Some tips are:
You do not need a BE query for every report and you do not need a Universe for every existing BE query
Focus the implementation strategy on limiting the number of Bex queries and Universes that share common elements
Build a small set of Bex queries focusing on sharing common elements in a small number of Universes
Understand that primarily the WebI Query Panel definition influences how much data is retrieved from BW, and not the BE query design or the WebI Report layout, In some situations extremely large queries and universes can adversely affect performance
Removing / Hide Unnecessary u201CL00u201D Objects
Removing / Hide Unused or Redundant Detail Objects
Remove all prefixes « Lxx ». Copy the initial name in the Description of the object
Rename the attributes (Detail objects) when necessary : remove the suffixes when no Business signification
Optimizing Detail Object Syntax
I hope this help you.
Best Regards
Edited by: Federico Sperling on Jun 18, 2009 8:36 PM

Row level security at universe design level

Hi,
I am creating a Universe layer on top of non SAP OLAP cube ( from MS Analysis Services 2005 ) .
My concern is that can we maintain the row level or data level security at universe design level or if i am using that universe in creation of WEBI report so is there any possiblity to maintain this security at WEBI level.
Regards,
Mishra Vibhav.

Thanks for the reply.
Much Appriciated.
My only concern is that i read in the Universe Designer developer guide that it does the row level security so can eloborate a bit about how we maintain at Universe level.
Warm Regrads,
Mishra Vibhav

Universe Designer is disappeared when univ is 'save as' PDF

Hi All,
Iam getting the error , Iam using the BOXI Desginer with FP 1.7 on Windows XP.
Universe Designer is disappeared when universe is 'save as' as PDF.
It is creating the blank PDF.
Please suggest any workaround solution.
Regards
Mahesh

Hi,
I am using BOE XI3.1 SP2 and I have no problem with the "Save as PDF" feature.
I recommend to upgrade your version or cretae a support ticket.
Regards,
Didier

Error While Accessing Universe Designer

Hi All,
I am facing an strange issue - I have BO Installation on windows server - 2003.
As a client when iam trying to access the server from diffrent location i am able to access CMC and Polestar.
But When i am trying to access universe designer - it shows an error -
Cannot access Repository ( uSR0013)
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(FWM 00001)
(hr=#0x80042a01)
Any suggestion.
I am able to telnet my server ip with port 6400 and 8080.
Thanks

I think there is some problem because of firewalls.
Could some one tell me what are the list of ports need to be opned for server client model.
i asked network team to open the ports 6400 -6410 only.
Do i need to open ports ??
My BO server installation is default and CMS is on - 6400. and i haven't configured anything else.
pls suggest the approach.
Thanks

Infocubes are not visible in $INFOCUBE Folder in Universe Designer

Hi, Queries are seen and accessible but Infocubes are not seen $INFOCUBE Folder in Universe designer. Please let me know what might be the problem and please suggest the solution.
Environment: SAP BI 7.1, BO Edge3.0.
Thanks in advance.

Hi
When opening BW infocubes from crystal reports we have problem:
In se37 ; we executed BAPI function BAPI_MDPROVIDER_GET_CUBES
- put in as the CATALOG $INFOCUBE.
when we did the above steps. i got this message "201No InfoProvider exists with name "YN_SUBFAM". adn there are around 350 entries.
But infocubes are not visible in $INFOCUBE Folder in the crystal reports. Is it bug? how can we resolve this issue. all infocube are active in rsa1.
Please help us

What is the syntax for the mdx offset in universe designer?

Hi everybody!!!
I wish someone could help me with my mdx syntax. I made an universe with Universe designer (BOEdge 3.1) from a BW query and I'm trying to create in this universe an object with an offset.
My new object has to be the result of the [0CALYEAR].[LEVEL01] with "- 1" offset, is it possible???
I tried to put the code in the select or in the where fields of the object but without results. When I try to make a query in webi rich client this "new object" doesn't work...
Please help me...
Dario

Hi Ingo,
thank you for the reply.
I tried to use that document...the problem is when I put the code in the object (inside univ des) and I analyse the code using the button, the syntax is every time without errors. When I try to make the query in webi rich client , if I use that object the software shows a window with error.
I used these code in the "where" field:
1. <EXPRESSION>@SELECT([0CALYEAR].[LEVEL01])-1</EXPRESSION>
2. <EXPRESSION>@SELECT(Anno calendario\L01 Anno calendario)-1</EXPRESSION>
the problem is to find the right syntax for what I want...the -1 offset for the new object from the OCALYEAR. I need that if in webi I select from the object filter [0CALYEAR].[LEVEL01] the value 2010 - in the new object will be 2009 etc...
Dario

Universe design creating measure issue

Similar Messages

Maybe you are looking for