Universe on crystal report server

Hi guys:
i have a question, dose crystal report server 2008 support universe?
if yes, how should i install it?
if not, is any substitution? so i can use the dashboard to create some pie charts on infoview.
thanks
Howard

hi
please have a glance of the above link
http://help.sap.com/businessobject/product_guides/crs2008/en/CRS2008_quickinstall_windows_en.pdf
thnks

Similar Messages

How do I build a Universe in Crystal Reports Server 2008 V1?

Hi all,
I am new to Crystal Reports Server 2008. In another thread, I was advised that Business Views would eventually be phased out and that I should use Universes instead. How do I build a Universe using CRS 2008 V1? I cannot find the executable for the Universe Builder.
Kind regards,
Janice

Hi
use the Universe Designer (designer.exe).
Regards,
Stratos

KBase ID 344488: Logon failed when connecting to universe in Crystal Report

My question is related to [KBase Article ID:344488|http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=344488&sliceId=&dialogID=24618166&stateId=1%200%2024614949]
Article refers to: Crystal Reports XI
Symptom
When attempting to create a connection to a universe in Crystal Reports, after clicking OK in the Database Expert Query Panel, the following error message appears: "Logon failed".
The query is not generated. In the Universe folder of Database Expert, the following message appears: "u2026no items found".
I'm running BOE XI and Crystal Report XI R2 with MS SQL Server 2005 using ODBC.
The resolution psoted in the KBase Article ID:344488 does not resolve the issue in my case. Does anyone have any ideas on what to look at next?

Hello Donald,
I'll describe the process flow when Crystal Report reports off of a Universe, in hopes the info will help narrow down your issue.
When you create a Crystal Report and open an Universe, it connects to the Enterprise system and uses a Report Server on Enterprise to generate the SQL Statement. After you create the Query in the Query Panel, and add the Query to the report, the SQL Statement is sent to the Crystal Report Designer.
The Crystal Report Designer makes a local connection to the database and sends the SQL Statement to retrieve data.
You're using ODBC connectivity. If the defined ODBC isn't identical between the server where the Report Server is running, and the client where the Crystal Report Designer is running, then you'd get the Logon failed error.
Other than checking the drivers, I'd recommend that the ODBC connection on both server and client point to the same database, and allow use of the same database logon credentials.
Sincerely,
Ted Ueda

Crystal Reports Server XI - A subset of Business Objects Enterprise?

Post Author: RVM
CA Forum: General
I'm evaluating Crystal Reports Server XI with a view to fulfilling the reporting requirements of my Client. I've identified Crystal Reports Server XI as the ideal solution and have been looking for documentation that describes the constituents of CRS XI and the architecture of the product from a technical perspective. I haven't been able to locate an administrators guide for CRS XI similar to the one available for crystal Enterprise 10 and Business Objects Enterprise XI R2. I've read that CRS XI is a subset of Business Objects Enterprise XI and as such has the same arichitecture. COuld some please clarify what constituents of BO Enterprise XI also reside within CRS XI?
Thanks in advance,
RVM

Post Author: yangster
CA Forum: General
It is kind of annoying that they didn't bother to create any documentation for Crystal Server XI.I've used both products and the key difference is that Crystal Server XI is limited to 20 user licenses (combination of either named or concurrent types) so if you have a very large user environment then your only choice may be BO XI.In terms of development and deployment the key difference between the 2 is that BO XI allows you to create universes. Which in terms allows you to use the Webi functionality. You can still use webi in Crystal Server but that's kind of pointless as the only universes you will be able to report off are sample universes. Within Crystal Server you will still have all the functionality that exist in BO XI with the exception of the universes so you can still build business views, list of values, schedule reports, create custom calenders, etc. So if you were to just snip out everything that deals with universes in the BO XI admin guide you'd have the Crystal Server admin guide.

OLAP universes and Crystal Reports

Hi everybody,
as we know Crystal Reports can not use OLAP universes as data source. The details about that have been discussed several times in this forum, for example in the threads:
Logon failed with Universe data source
Logon failed when trying to connect to a SAP BW related universe
The possible data sources are perfectly explained in the Blog from Ingo Hilgefort.
/people/ingo.hilgefort/blog
But... why these connection type is not possible???
From my point of view these missing functionality comes with a lot of drawbacks. The universe has a lot of advantages, and first of all it is isolating the business users form technical complexities. But if the business users can not access to the OLAP universe they have to face to technical complexities.
Another point: Consider a perfect integrated SAP BW environment with Business Objects Enterprise and Crystal and Xcelsius. The administrator can now define a perfect universe structure, tailored on the particular business needs of the end users. This universe structure can be used for Web Intelligence and Xcelsius (QaaWS). But for the Crystal Reports I have to define another interface to the BW data sources, which can not be done by the Administrator.
So, some open questions:
- Why is the connect to OLAP universes not possible - does that make sense?
- Will the connectivity be available in future - is that part of the actual roadmap?
- What is the recommanded approach for a business case as shown above, meaning how can I isolate my business users from technical complexities by using SAP BW as data source for Crystal Report.
Thank you for any comments and advises,
Sebastian

Hello to everybody.
When I was starting to work on the BO products I had exactly the same question.
Why were the OLAP Universes not supported in Crystal Reports?
Well, I have a few facts in my mind, I explained the decision of SAP in this case with for myself.
1. Very simple and my first thought: monetary aspects. There excist the SAP Integration Kit. These drivers work pretty fine. So for what reason SAP should invest money in an other technique to access the SAP data?
2. It excist a server solution for small and medium-sized companies named Crystal Reports Server. I'm not sure but I don't think this package contains the Universe Designer. If acces on SAP data over the OLAP Universes would be possible, the Crystal Reports Server customers should also get the Designer tool and the Translation tool, too. Less profit margin.
3. Creating a Universe out of OLAP data destroys the moredimensionality. Universes are flat constructs. So maybe it makes no sense to use this meta layer.
4. A typical Crystal Report user isn't someone who had no technical understanding. For me these users should know and understand the data source very well. So an Universe would limit there the possibilities for building a report.
5. I think the SAP itself did not know where the journey should go with this toolset. A roudmap that changes severalt times in one year an many many rumours about these tools proof this.
So I think maybe we just have to wait a few months and the support for the OLAP Universes will come with a fix pack. Who knows...
Greetings,
Sebastian

Controlling Access to Certain Reports When Using Crystal Reports Server

Hi,
I was wondering exactly how security is managed when using Crystal Reports Server? Do you assign rights to individual reports via user ids in Active Directory? Or what exactly is used for user authentication? Is it possible to create local accounts? Thanks.

Usually access is controlled by permissions which are set in the CMC (BO web admin tool). You can map 3rd party groups from AD or LDAP and then assign permissions to those groups or set up security with built in enterprise groups as well. You may elect to use any combination of the above. For more complex security models there can use database and row level security built into our meta layers called business views and universes.
Regards,
Tim

Crystal Report Server / Business objects XI R2 questions

Hello all,
If this isn't the place to post these questions please advise which forum is. Thank you in advance.
We are running XI R2 SP5 of Crystal Report server (11.5.11.1470). I have some general questions...and are fairly new to this version. Although I have been developing CR for many years.
There is plenty of discussions here about "Universes" in BO, but for my deployment I don't think this applies. Correct?
I have created list of values (LOV) using Business View Manager (11.5.11.1470) and would like to
1. give the user an ability to select an "ALL" option in the report.
2. If the LOV is large, it only returns a partial list.
Now i have search these forums and other and found discussions regarding the above but none seemed to relate to my version. Either I'm missing some component or just slow.
Any advice / help would be greatly appreciated.
Thank you.

>
Suresh Babu Aluri wrote:
> Hi,
>
> You can create All prompt in lovs of reuired object as
>
> do the following steps for all prompt creation.
>
> 1. Go to Object to which the lovs are mapped. -> select object -> properties -> advanced (not sure) -> edit lovs -> then a query panel will display and it will have query like
>
> select distinct(..........) from ......................
>
> change the above query to
>
> select distinct(..........) from ......................
> union
> select 'all' from dual -> dual is temporary table in oracle (you define a temporary table w.r.to database)
>
> 2. In designer go to the object on which prompt is defined.
> i.e.
>
> may be in selecor where clause you might defined prompt as
>
> .............. @prompt('Member Name')
>
> so change that to
>
> .................. .............. @prompt('..Member name')
> or
> 'all' in @prompt('Member name')
>
> 2. For your second requirement the max no lov values are changed in prm files. For that go to programs -> BO -> BO ii.5 or ur version -> dataaccess->win32_x86-> based on ur back end select required folder -> search in *.prm files to change the max no lovs.
>
> Cheers,
> Suresh Aluri.
Hi Suresh
Thank you for the detailed response. I tried your suggestions and neither works.
LOV issue:
Within the Business View manager, i right-click on the LOV object and click "Edit List of Values..." and i get a dialog box that only shows me Available fields, List of Value Fields used, description field, and Referenced objects. Along with buttons for Clear Instance & Refersh Status.
I have read similar posts to what you suggested but never get to the same place as described.
Please advise....
as for _Max Number LOV _
I have researched this as well and found the same suggestion you made. But the PRM file does not have that value, and the file contains all XML code
Now what???
Thanks
Mike

Error when I deploy a report on crystal reports server 2008 V1.

Hi ,
I am getting below error when I deploy a report on crystal reports server 2008 V1. I have installed the crystal server on Linux machine.
"A server communication error occurred. All servers with kind rptappserver could be down or disabled by the administrator. "
Please help.
Thanks,

Hi
use the Universe Designer (designer.exe).
Regards,
Stratos

Drop down boxes ok in Crystal Reports but not ok in Crystal Reports Server

I have the following problem with "dynamic dropdowns"
Initially, I have a Crystal Report (.rpt). It has two dynamic drop downs. They work
in both Crystal Reports Designer (preview) and Crystal Reports Server (right-click-View).
The first drop down is the result of a rather complex sql query. The second drop down
is a child of the first.
I make a small change to the sql "WHERE" clause using the Crystal Reports Designer. It works fine in preview.
I save (Enterprise mode) to Crystal Server. I use Business View Manager to configure
the _DC_n object. (I did notice that the .._DC_n gets incremented by one.)
The _DF object seems to know about the updated sql so I do not have change it.
However, when I go to back to Crystal Reports Server, and right-click-View, the
"dynamic dropdown" is not working properly. I can not make sense
of what has been retrieved.
Please tell me what is most likely to have gone wrong here? The Business View Manager
seemed to knew about the sql change. But Crystal Reports Server has
not responded to the change in the same way as Crystal Reports Designer.
...thank you, Stan

When you publish a report to Crystal Server, the dynamic prompts are no longer handled in the report itself. Instead depending on how they're published, they either go away or they're published to the "repository" and managed through the "Business View Manager" (BVM), which is available as part of the Client Tools install.
To get the dynamic prompt into the repository, you have to check the "Enable Repository Refresh" checkbox at the bottom of the "Save As" screen after you log in to CRS. However, doing it this way is NOT best practice, especially if you're using the query from the report to provide the data for the prompt. If you do this for all of your reports, you get a LOT of bloat in the repository objects and it makes the job of migrating from one version of CRS to another MUCH more difficult!
What I've done in the past to get a simple "sample" prompt published is create a report that just contains the data that I want to have in the dynamic parameter using a single table - this is usually what I call a "lookup" table that has a "code" field and a "description" or "name" field. I then create a dynamic parameter in that report that just pulls the data from the single table. I'll publish the report to my favorites with the Repository Refresh enabled.
I then run the BVM and look for the following objects (default location is under "Cascading Dynamic Prompts":
<prompt name>_DC - This is the Data Connection for the prompt. Edit this, enter the password, and set it to "Never Prompt" for the password. NOTE: This DC can be reused by multiple prompts. If you continue to add prompts through publishing Crystal Reports with prompts, you will get MANY of these that all point to the same database!
<prompt name>_DF - This is the Data Foundation for the prompts. When you create a new one, you need to select an existing DC and then either one or more tables or write a command to provide the data for your prompt. It works much like the Database Explorer in Crystal. The one that was just saved has all of the information required for the prompt.
<prompt name>_BE - This is the Business Element. When you create one, you have to select and existing DF and one or more fields. You can also create a filter on the data. This is used to generate the SQL that will be run to provide the data for the prompt.
<prompt name>_ BV - This is the Business View. When you create one, you have to select the Business Element. I'm not sure of the exact purpose of this, but you have to have one in order to set up the "List of Values".
<prompt name> - This is the List of Values (LOV). This defines what fields are available for the prompt itself.
You can create folders to organize these objects so that its easier to maintain.
To use a LOV that you've defined in BVM to feed data to new dynamic prompts, do the following:
1. Connect to CRS from Crystal.
2. Create/Edit your prompt.
3. Set the prompt to be dynamic.
4. Under "Choose a Data Source", select "Existing" and select the LOV from the drop-down list.
5. Update the properties in the parameter.
When viewing or scheduling a report, the dynamic prompts will run through the Crystal Reports 2013 Report Application Server in CRS (it will be named differently if you're not on CRS 2013, but will have "Report Application Server" in the name.)
-Dell

Crystal Reports Server XI R2 - RAS service will not start

We had a copy of Crystal Reports Server XI R2 running on a Windows 2003 SBS Server and the database running on SQL Server 2000 on the same box. We were forced to upgrade this server Windows 2003 SBS Server 2003 R2 with SQL Server 2005. The upgrade worked fine however after the upgrade we could no longer open reports in infoview.
We soon realised that the RAS(Report Application Server) service was stopped however we could not start it.
We tried doing a full uninstall(deleting the directory and registry info) and reinstall several times on the same server pointing to the existing database and trying to create a new database in both MYSql and SQL Server but again the same problem. While our licensing agreement means we can only install it on one server we tried on another and again we had the same issue.
We see several errors in the event viewer of the server, these are:
-Unable to create the Corba OSCA factory and register it on the eBus (Source:BusinessObjects_crystalras)
-Failed to register with the CMS 'Server Name'. Please make sure the CMS is up and running. Attempting an automatic retry. (Source: We see this error show on a fair few of the service after stopping and firing up services, but they seem to disappear)
-An error occurred while creating a Page Server subprocess.(Source: BusinessObjects_pageserver)
If I try firing the crystalras executable just for interest sakes I get a "No valid license found for this product" error.
We thought it may have been a license issue caused by the upgrade but have been told that the license key still appears to be valid.
Any help is appreciated.

Hey did anyone ever answer your question, I have exactly the same problem 4 years later, sigh

Crystal Reports Server 2008 dispose not closing document

Hey everyone,
I;m running some reports through Crystal reports 2008 server (no service packs) using the RAS sdk and Java.
This was working swimmingly for a while until yesterday when the server hosting the RAS and app server fell over. I tracked it down to a problem with the RAS server. The error i got in my logs was General Exception, Report SDK Exception Not enough memory for operation. I reran the process and when i watched task manager the memory being allocated to crystalras.exe went through the roof! it went from 50k to 1.8g of ram in under 10 minutes.
I tried lots of the other suggestions in here for the errors about memory that are similar to mine (increasing the heap memory etc.) and none of them worked.
One thing i noticed though is that when I run the process and watch the metrics page of the RAS server on the management console the number of Open documents does not decrease even though i am 100% totally and utterly calling .close and .dsipose after every report i open. Definitely. Ive debugged it a million times and it is calling these methods. It is successfully releasing the connections fine but does not seem to releasing the open documents. After the Open documents metric went down to 0 (im presuming after a timeout) the memory that crystalras.exe was reduced. I then changed the timeout tag in CRConfig.xml to 1 minute to see would this help out any but the open documents did not timeout any faster.
Would i be right in thinking that these open documents would be causing my problem of the aggregated memory? Im at my wits end here so any piece of help is greatly appreciated!

Hi Ted,
Thank you for getting back to me, i was on vacation there for a while so that is why i didnt get back to you.
When I call reportClientDocument.isOpen() just before i dispose of the report it is true and after i dispose of it it correclty returns false.
I am really stressing out over this as we are reduced to running 500 reports through the server (one after another) and then stopping the process and restarting the RAS server and then running another 500 reports.
crystalras.exe gets up to about 2g of ram consumed for only 500 reports.
I even changed some of the timeout settings on the settings page of the management console to see would they timeout and release the memory but alas it didnt release as much as a byte. I left it for 3 days and it didnt deallocate one piece of memory.
Im currently investigating is there some way from my code that I can restart the RAS server, either through the SDK or through a windows process or scheduled task.
Ted, as far as i can see there are no service packs for Crystal Reports Server 2008, is that right? when i go to the downloads page there only ones listed for release X1.
Thank you for your help.
J.

Report fails to generate on Crystal Reports Server

Post Author: cmilkosk
CA Forum: General
Hello all!
I have a case open with BO on generating a report from a Crystal Reports Server (CRS). The report works fine when running in Crystal Reports on my PC, but after I send it to the Crystal Reports Server, it fails with a message like:"Failed to open the connection.
C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\metrixdb.reportjobserver\~tmp9bc512965895e0.rpt"This error appears to be telling you that it is trying to connect to
the CRS's reportjobserver process and having a problem, but the service is up according to the Central Config Manager. I tried starting and stopping it, but it didn't make a difference. This happens for different reports sent to the server. One common thing that I've noticed is that the reports that connect to the CRS's local SQL Server 2005 database are the ones that are failing. So, my CRS resides on the same host as the SQL Server 2005 database (which also houses the CRS SQL DB). Interestingly, reports scheduled that connect to a remote SQL Server 2000 database work fine. It could be the simplest report that I am running off of the CRS/SQL Server 2005 host, and it still fails every time. Tech support so far hasn't been much of a help. They suggested that I upgrade my Crystal Reports software on my PC to R2, but that didn't fix the problem.Has anyone had any trouble like this before? If so, have you found out what the cause was?I'm beginning to wonder if it is related to SQL Server 2005 or potentially just that it is connecting to a local database.Note - my CRS's software version appears to be 11.5.3.438. I'm not sure if I am running CRS R1 or R2 (how can you tell?).Anyone have any ideas?Thanks,Chris

Post Author: cmilkosk
CA Forum: General
Anyone have any ideas? Tech Support doesn't seem to be helping much. Chris

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Please help with my crystal reports server 2008 trial setup

Firstly, if this is in the wrong section feel free to move it. I find this forum is to big to find the information i need, in fact trying to find anything i need on this website is almost impossible. So far not impressed with SAP at all! we download a trial and when we have problems nobody can support us and we have to post in the forums for answers, which i find disgracefull to be honest. So this post is my last attempt of finding the answers to my problems or we are going to forget crystal reports server for good! I was also told that if i wanted help setting this up then i would have to pay, thats not how things usually go when we download a trial of any software!
Anyway, rant over!!
Right, we have windows server 2008 and have installed crystal reports server 2008. So far all i have managed to get working is the reports themselves which run and schedule fine. The dashboard and business views are so confusing i just dont get it at all, the manuals dont help either becuase they are rubbish basically. But my first problem is trying to get windows AD authentication working! easier said than done. I have spent 4 days trying to get it working but nothing is happening. this is what i have done so far
Set up all the options in the CMC to enable AD authentication, mapped a few groups one of which i am a member of.
Then i setup the krb5.ini file like below (removed my server name and domain name)
[libdefaults]
    default_realm = DOMAIN.CO.UK
    dns_lookup_kdc = true
    dns_lookup_realm = true
    udp_preference_limit = 1
[realms]
DOMAIN.CO.UK = {
    kdc = DC.CO.UK
    default_domain = DOMAIN.CO.UK
i also have that other file bscLogin which looks like this...
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
The server inteligence agent has been set to use the same username as i specified in the CMC which is also the service principal name and the administartion name
i have set the web config file to use SecWINAD as default, i have also set it to give the option of enterprise, win ad etc in a drop down list
i have gone round in circles for days following the instructions, and nothing is happening
Also i dont see any usernames within the groups i have mapped , am i supposed to see any? am i supposed to add them manually?? if so, whats the point in that?
So now everytime i try to log in i get this error message
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
There is also another error message i get, which isnt coming up right now but it says somthing along the lines of could not authenticate at this time (FWM 00005)
i fail to see what im doing wrong. I shoudl also point out that the username i am using for everything is our own network admin password!
any ideas on things to check before we give up with this all together?

Hi Roberto,
With the changes when SAP took over BusinessObjects the support packaging also changed. It's the way it is now but we are moving to and giving as much options as we can. SAP works on the Self Serve practice. the info is available but you have to find it, which is another thing we are working on to improve for BOE/CRS.
Best place to start is in the CMS link off the start menu, You'll find the Admin Guide and Setup/Configuration Guides. You can also find all of the latest info and updates to those guides from help.sap.com then click on the SAP BusinessObjects tab along the top and then on the left click on All Products and then filter on your version.
Once the Firewalls and Domains and your CRS Server is added to the Trusted Domains and ports opened to allow CRS to talk to the DNS Server CRS will begin to load all of the users into it's User Mappings. You still have to add each user or Group of Users but they will be available. Documents does describe how to....
Once you have the Admin Guide search on Security and it explains in details how to set up and which ports need to be opened etc.
Thank you
Don

How to print a report on crystal report server using webservice call

Hi,
I'm looking for web service api calls that help print a report on the crystal report server. Can someone post a snippet of how this is done.
Thanks,

Below is a snippet that uses the BusinessObjects Enterprise XI Release 2 version of the BIPlatform Web Services Java Consumer API:
Sincerely,
Ted Ueda
/* Printer name */
String printerName = "\\\\van-s-prt01\\VAN-P-BEAVERCREEK";
/* URL to Enterprise Web Services */
String servicesURL = "http://localhost:8080/dswsbobje/services";
Session ceSession = null;
Connection ceConnection = new Connection(new URL(servicesURL + "/session"));
EnterpriseCredential ceCredential = new EnterpriseCredential();
ceCredential.setDomain(cmsname);
ceCredential.setAuthType(authType);
ceCredential.setLogin(username);
ceCredential.setPassword(password);
try {
     ceSession = new Session(ceConnection);
     ceSession.login(ceCredential);
     ceConnection.setURL(new URL(servicesURL + "/biplatform"));
     BIPlatform bip = new BIPlatform(ceConnection, ceSession.getConnectionState());
     GetOptions getOpts =new GetOptions();
     getOpts.setIncludeSecurity(Boolean.FALSE);
     ResponseHolder rh = bip.get(reportPath, getOpts);
     InfoObjects infoObjects = rh.getInfoObjects();
     CrystalReport report = (CrystalReport) infoObjects.getInfoObject(0);
     ReportProcessingInfo processing = report.getPluginProcessingInterface();
    CrystalReportPrinterOptions printerOptions = processing.getReportPrinterOptions();
    printerOptions.setEnabled(Boolean.TRUE);
    printerOptions.setPrinterName(printerName);
     report.setSchedulingInfo(new SchedulingInfo());
     report.getSchedulingInfo().setRightNow(Boolean.TRUE);
     bip.schedule(infoObjects);
} finally {
     if(ceSession != null)
          ceSession.logout();

Universe on crystal report server

Similar Messages

Maybe you are looking for