Unix Aix server how to run GUI mode for OBIEE 10.1.3.4.0

Hi
Experts
I have Query on Obiee
how to start GUI mode IN AIX unix server trough Vnc viewer. could Please tell Me any shell scripts is there
very Urgent
AdvanceThanks

Thanks very much to responding to my question.
I tried by disabling the Java Plugin in my IE browser and open a few chart reports with no problem.
Have you actually experience problem when you do that? Like to know when will it actually have problem.

Similar Messages

Run essmsh under UNIX AIX server

HelloI'm trying to launch MaxL editor on a UNIX AIX server and i'm getting the following message ...0509-150 Dpendent module libessapiS.a could not be loaded0509-022 Cannot load module libessapiS.a0509-026 System error: A file or directory in the path name does not existDid somebody already encountered this ?Thanks

> JAVA:
> /usr/sap/<SID>/SCS01/exe
Java shouldn'T be patched "manually" but only using a full stack. Since only few parts of the kernel are used in an ABAP instance there's no need to patch e. g. "disp+work".
> The systems are running fine so far and after logging in to the ABAP stack it shows the current kernel level 200 ...
>
> However if we run the JSPM it still shows us the old kernel level 180 ...
yes - because the Java part doesn't "know" anything about single kernel patches but only stacks.
> What's wrong here ?
> How can we bring the JAVA Stack to a current level ?
There is no need to. The support stack on your Java and the installed kernel should match.
> We found a strange and older dispwork we couldn't execute using "dispwork -V" under
>
> /sapmnt/<SID>/exe/uc/rs6000_64
That is the "new" directory structure for kernels. Systems starting with 7.10 will use that structure. See
Note 1104735 - Upgrade to new instance-specific directory on UNIX
You may not be able to execute the dispwork since that part of the kernel relies on corresponding libraries (.o files). If you didn't change your SHLIB_PATH to that directory uc/rs6000_64 the startup of dispwork will read those in your normal kernel installation directory - which fails then.
Markus

Designer on AIX server: how to

Hi all,
I've BusinessObjects Enterprise XI 3.1 on AIX Server: how can I launch and use Designer and the other "non-web" BusinessObjects tools (e.g.Import Wizard)?
At the moment I use Designer or Import Wizard installed on a WIN Server and then I export Universes or reports to the AIX server, but soon this WIN server will be dismissed .... HELP
Thanks a lot!

Hi
the BO client tools are only available for windows. YOu can install them separately on a windows workstation.
Regards,
Stratos

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to set Update Mode for DSO in BI7.0?

Hi,
As you know in bw3.5, in update rules we can set the update mode for ods as Additive or overwrite functionality.
But can anybody tell me where are these settings in bi7.0? or
How to set Update Mode for DSO in BI7.0?
Thanks and Regrards,
Harshal

Dear Harshal,
GO to the tramsformations of your DSO..
In the Rule Group..Click on any key Figure..
this pops u a window..in which u will find AGGREGATION ..Then u can select Either OVERWRITe or SUMMATION which suites ur requirement..
Hope this helps u..
Assign points if helpful..
Best Regards,
VVenkat..

How To run Currency translation for Consolidation Application in BPC NW

In "How To do Currency Translation for Financial Application in BPC 7 NW", the author mention that there is another "How To run Currency translation for Consolidation Application in BPC NW", anybody know where to get it?

Hi...
Check if the below links are useful to you.....
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6052a57b-8c64-2c10-b3a5-b0378ff21243&overridelayout=true
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ea1fd8-d6d3-2a10-c1ab-e8164dd98316
You can find all How-to docs in the below link
http://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides

How to run Crypto Tools for SSO Enabling

Hi Friends,
How to run Crypto tools for SSO enabling. If any body knows please help me...
Thanks

Hi ;
what is the script for windows Environment...

How to run wfstatus.sql for i-Expenses

how to run wfstatus.sql for i-Expenses in 11i EBS.

Pl see MOS Doc 295078.1 (Maintenance Pack, Patchset, and Rollup Patch Level for Internet Expenses 11i)
HTH
Srini

NAC Guest Server, How to change the password for a single user?

We have a NAC Guest Server which creates a complex password for all new users created.
We would like to have normal/simple password for a single user. How can I get this done on a NAC Guest Server.
Thanks in advance.

Hi,
You can setup 3 different flavours of passwords:
http://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_guestpol.html#wp1063249.
a. Username Policy 1 - Email address as username
Use the guest's email address as the username. If an overlapping account with the same email address exists, a random number is added to the end of the email address to make the username unique. Overlapping accounts are accounts that have the same email address and are valid for an overlapping period of time.
b. Username Policy 2 - Create username based on first and last names
Create a username based on combining the first name and last name of the guest. You can set a Minimum username length for this username from 1 to 20 characters (default is 10). User names shorter than the minimum length are padded up to the minimum specified length with a random number.
c. Username Policy 3 - Create random username
Create a username based upon a random mixture of Alphabetic, Numeric or Other characters. Type the characters to include to generate the random characters and the number to use from each set of characters.
Note: The total length of the username is determined by the total number of characters included.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

How to run a VI for very short time, e.g. 100ms?

Hi,
I need to run a VI for very short amounts of time, say 100ms, 200ms, 500ms or 1s. I want to get this time from the user, maybe as a control variable. How may I do this? I tried using the "elapsed time" function but seems like it was not meant for such small time periods. Any ideas?
Thanks
Kaiser

What are you trying to do in the "short time"? When you say "run a VI" do you mean "start, run and stop running", or do you mean for the vi to do something for the specified time, i.e. flash a front panel LED for a precise period after the operator clicks a button? In the later case 100mS is actually fairly long, and can be accomplished with various timing functions, with varying degrees of accuracy. The most accurate, in a Windows environment, would probably be the timed loop. If you need really accurate, particularly if you are interfacing with hardware (a pushbutton, an actual lamp, etc.) a real-time system would be the best bet.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Envy Beats 15-1055se - How to enable AHCI mode for SSD

How can i enable the AHCI mode for the envy 15-1055se. I tried to find this option in the bios, but its not there. I already installed an SSD and the OS (Windows 7 home Premium). Im using Samsung EVO 250gb.

That can be done by using Windows Regedit feature. It is imperative that you make a copy of the registry before you commit to the change.
Use regedit with extreme care. All changes that you make take place instantly. That is why it is critial to have made a copy .
What is the installed operating system?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to run a thread for second time ?

I have a written a ThreadPool, but I found that basically a thread is not running for the second time. i.e First i call run() method and call stop(). If i call again run() method for the same thread, it is not running. What should I do, If i want to run the thread for the second time ?
class NewThread implements Runnable {
String name;
NewThread(String a) {
name=a;
public void run() {
try{
for(int i=0;i<5;i++) {
System.out.println("Thread :" + name + " #" +i);
Thread.sleep(5);
catch (Exception e) {
e.printStackTrace();
class threadRunnableTest {
public static void main (String args[]) {
Runnable runnable=new NewThread("BaSkAr");
Thread thread = new Thread(runnable);
try{
System.out.println("First Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("First Thread it to be stopped!!");
thread.stop();
System.out.println("Second Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("Second Thread it to be stopped!!");
thread.stop();
catch (Exception e) {
e.printStackTrace();

baskark wrote:
I have a written a ThreadPool, but I found that basically a thread is not running for the second time. i.e First i call run() method and call stop(). If i call again run() method for the same thread, it is not running. What should I do, If i want to run the thread for the second time ?
class NewThread implements Runnable {
String name;
NewThread(String a) {
name=a;
public void run() {
try{
for(int i=0;i<5;i++) {
System.out.println("Thread :" + name + " #" +i);
Thread.sleep(5);
catch (Exception e) {
e.printStackTrace();
class threadRunnableTest {
public static void main (String args[]) {
Runnable runnable=new NewThread("BaSkAr");
Thread thread = new Thread(runnable);
try{
System.out.println("First Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("First Thread it to be stopped!!");
thread.stop();
System.out.println("Second Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("Second Thread it to be stopped!!");
thread.stop();
catch (Exception e) {
e.printStackTrace();
It's usually helpful to check the documentation:
[http://java.sun.com/javase/6/docs/api/java/lang/Thread.html#start()|http://java.sun.com/javase/6/docs/api/java/lang/Thread.html#start()]
start
public void start()Causes this thread to begin execution; the Java Virtual Machine calls the run method of this thread.
The result is that two threads are running concurrently: the current thread (which returns from the call to the start method) and the other thread (which executes its run method).
It is never legal to start a thread more than once. In particular, a thread may not be restarted once it has completed execution.
So, make a new java.lang.Thread

How to run Explain Plan for SP?

Can we run Explain Plan for SP??

EXPLAIN PLAN creates an execution plan for SQL statements. PL/SQL is not SQL.
PL/SQL procedures can contain SQL, yes. These SQLs can be copied and pasted from PL/SQL into something like TOAD and execution plan determined.
However, if the aim is to see the "execution/performance plan" for PL/SQL code, then you need to profile the PL/SQL code using the DBMS_PROFILER package. This will tell you the execution path and elapsed time to execute a line of PL/SQL.
Details can be found in the [url http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_profil.htm#sthref5502]Oracle® Database PL/SQL Packages and Types Reference guide.

How to enable workprotect mode for unsaved data

Hi,
I am trying to enable workprotect mode for unsaved data and the reason is after entering hours in Record Working Time If the user navigates to other screen ,all the data entered in time is getting lost.
For enabling the Workprotect mode I did the following things
1.Go to system admin -> system config ->service config->Applicaitons ->com.sap.portal.epcf.loader
Change workprotect.mode.default to 2
Restart the config by right clicking on com.sap.portal.epcf.loader . Click Administrate ->restart
and
2.Opened the Personalise option from Masthead and selected workprotect mode and selected
Choose action in popup on unsaved data
But still it doesn't work.
What is missing here
Thanks
Bala Duvvuri

GLM,
I am testing with my own user id and i have set the settings as mentioned above
Thanks
Bala Duvvuri

How remote/local mode for GPIB instruments works?

Remote/local mode for GPIB instruments is being controlled by REN one of five interface management lines. That's the only information available on this subject. Where can I find some more detailed explanation? I still don't know what conditions have to be met to put device in remote/local mode.

REM indicates whether or not the board is in the remote state. REM is set whenever the Remote Enable (REN) GPIB line is asserted and the GPIB board detects that its listen address has been sent either by the GPIB board or by another Controller. REM is cleared whenever REN becomes unasserted, or when the GPIB board as a Listener detects the Go to Local (GTL) command has been sent either by the GPIB board or by another controller, or when the ibloc function is called while the LOK bit is cleared in the status word.
A call to the function ibonl clears the following bits:
END LOK REM CIC TACS LACS DTAS DCAS
You can find more information in the NI-488.2M Software Reference Manual (see link below).
http://digital.ni.com/manuals.nsf/web_productcurrent/43AB49D953CE104E8625665E0
07D11FF?OpenDocument
All of our manuals are available online at the following site.
http://www.ni.com/manuals/
Thanks,
Kim L.
Applications Engineer
National Instruments

Unix Aix server how to run GUI mode for OBIEE 10.1.3.4.0

Similar Messages

Maybe you are looking for