Unix cmd for opening cd door

Hi All,
Does anyone know the unix cmds for opening and closing the cd door?
Thanks,
Richard

...and for a stuck cd drawer, reboot while holding down the mouse.
PowerMac G5 Dual 2GHz   Mac OS X (10.4.3)  

Similar Messages

  • "The drive is not ready for use; its door may be open. Please check drive \

    3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
    Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
    "The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
    I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
    Laptop - Packard Bell Notebook   Windows XP  

    Hmmmm. I'm not sure how to explain this.
    You need to change the Drive Letter for your iPod.
    You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
    If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
    To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
    Once you've done all that, try resyncing.

  • I downloaded Mozilla when I first got my Mac.Is it a better than Safari?I tried Safari and I did not care for it. So can I still use cmd t or cmd n for opening multiple sites?

    I downloaded Mozilla firefox when I first got my mac as I did not like safari.Thah being said,which is better? and lastly can I still use cmd t or cmd with firefox for opening multiple sites? Thanks,Ralph

    You need to visit this page and learn all about Firefox's awesome features, don't ignore the add-ons, toolbar>customize or persona's they really personalize Firefox.
    http://www.mozilla.org/en-US/firefox/central/
    Also you need to make sure your browser plugins are current for your whole machine, Safari included.
    http://www.mozilla.org/en-US/plugincheck/
    I hope one day Apple will make Safari as awesome as Firefox and allow the choice it has, but not today.

  • Need help with easy script for open / close app and move files

    Hi,
    I'm not a scripter.. never done anything special perhaps more complicated than /shutdown -s on cmd..
    I actually learned ASCII C language on university but never used it in real.
    I'm trying to create a basic script that perhaps you could help me or guide me how to do it..
    The commands are
    1) Close a running app (end task it or force kill it, I prefer end task it)
    2) delete files from x location
    3) run .exe app from y location
    4) close that running app 
    5) move files from z to y
    Perhaps adding few "wait few seconds" commands in between each, so the apps will launch successfully..
    My first question will be whats the easiest script language to do that?
    I tried VBScript but couldn't find commands for open or close apps.. also for controlling files..
    And what commands can do that? I could google them up for better understanding no need for rough guide
    And lastly, does it too hard? If it takes more than hour to make it (learn and process) than it ain't worth it..
    Thanks alot ahead!
    Jordan.

    hmm 2 questions:
    1) taskkill.exe causing me access deny error.. I used "taskkill.exe /IM softwarename.exe"
    how do I get permission or something to fix that?
    2) on the "move" command..
    First, its a "copy" instead.. but I easily figured that out.. 
    but more important is that I want to copy a folder.. with unknown list of way too long files and sub folders..
    and all I see is ability to move a file..
    Is this possible?
    Thanks

  • How can we write the code for opening the command prompt and closing the

    how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

    rakeshsikha wrote:
    how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

  • Modifying destination Directory of Application server for Open Hub

    Hi All,
    i want to load a csv file on application server using Open Hub.
    when i have created the open hub i have specified the server name, the file name and the directory.
    but the Basis guys told me that i should use another directory, they have created me a Unix Directory but the problem that i can't modify the directory path in my open hub.
    can you tell me please what is the problem?
    another question why i can't modify directly in Production System this parameter of server name, directory for open hub,
    in production i can create the open hub but when i have transported some one from dev to prod i can't modify in prod, i have controlled from transport tool the possibility of modication object and i see that for opne hub is "original modificable"
    Thanks for your help
    Bilal

    i have read in some forum that to " to change the server name or logical file name we can do so in the following table:
    RSBFILE"
    i tried to see the data of this table and i found 2 records for my open hub, 1 for Active version and 1 for Modified version
    i tried here to change the path name of the directory and after saving the system give me the message that the active version and the modified version of my open hub are not equal, when i try to activate again my open hub the system take the old
    directory path.
    is this is the right table to change the directory path on application server of my open hub? or there is another table?
    i don't work with logical filename, i work with file name and directory path name.
    thanks for your help
    Bilal

  • Mail default applications for opening attachments

    I recently had to install Open Office in order to be able to open those kinds of documents produced by my colleagues. The only problem is that it now becomes the default application for opening .doc, .xls and .pps documents. I have changed this using command+i on each type and making sure I selected the "change all" so that each app opens under it's appropriate iWork program, but I still have a problem with Mail.
    In Mail, if I get a .doc attachment, clicking on it automatically launches Open Office. Worse, when I right-click and choose "open with", Open Office is listed twice at the top of the list!
    I loathe Open Office with a passion, not least because of this situation, but also because it frequently crashes and is still bound to using xterm. Nevertheless, I have to keep it as my colleagues are all on Ubuntu Linux and insist on using it for spreadsheets (to be honest, Open Office is okay on Linux).
    If only iWork apps could open OpenOffice documents... ah well.
    Any solutions would be most welcome!

    Here's how you can set your preference for which application to use on a given file type:
    1. select a file of that type
    2. press CMD-I to bring up the file information
    3. Click on the little triangle to expand the "Open With" section
    4. Select the application you want to use for that type of file
    5. Click on the "Change All" button
    This has worked for me in the case where I have Parallels Desktop installed and it wants to use my Office 2000 installation under Parallels to open MS Word & Excel attachments. I changed these to be opened by NeoOffice, and it works both from the finder and when opening attachments in Mail.
    I hope this helps...

  • RE: (forte-users) [UNIX] "Too many open files" 3.0.M2question

    Actually, the stuff works in interpreted mode.
    It's only when having the server partition compiled that this happen.
    j-p
    -----Message d'origine-----
    De: Adamek, Zenon [mailto:ZAdamekpurolator.com]
    Date: lundi 25 septembre 2000 17:13
    À: 'Jean-Paul.Gabriellisema.fr'
    Cc: Forte-userslists.xpedior.com
    Objet: RE: (forte-users) [UNIX] "Too many open files" 3.0.M2 question
    see Technote 10981
    -----Original Message-----
    From: Jean-Paul Gabrielli [SMTP:Jean-Paul.Gabriellisema.fr]
    Sent: Monday, September 25, 2000 11:02 AM
    To: zeForte-users
    Subject: (forte-users) [UNIX] "Too many open files" 3.0.M2 question
    Hi,
    running a server partition that reads a configuration file,
    and apparently doen't close it after, I have that exception:
    SYSTEM ERROR: System Error: Too many open files, opening '....'with mode
    'r'
    Class: qqos_FileResourceException
    1) Is there such a limit, or does this rely only on the OS one ?
    2) How is this error not trapped, as I only got itinteractively, whereas
    my server log does a exception trap/segmentation fault,
    thanlks
    j-p
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe,send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    Hi Jean-Paul,
    As described in the Technote 10981 some Forte programs (Nodemanager and
    router) handle correct the high-file descriptor-use problem. It is possible
    that Forte interpreter do it correct too.
    Zenon
    -----Original Message-----
    From: Jean-Paul Gabrielli [SMTP:Jean-Paul.Gabriellisema.fr]
    Sent: Monday, September 25, 2000 12:11 PM
    To: Adamek, Zenon
    Cc: Forte-userslists.xpedior.com
    Subject: RE: (forte-users) [UNIX] "Too many open files" 3.0.M2
    question
    Actually, the stuff works in interpreted mode.
    It's only when having the server partition compiled that this happen.
    j-p
    -----Message d'origine-----
    De: Adamek, Zenon [mailto:ZAdamekpurolator.com]
    Date: lundi 25 septembre 2000 17:13
    À: 'Jean-Paul.Gabriellisema.fr'
    Cc: Forte-userslists.xpedior.com
    Objet: RE: (forte-users) [UNIX] "Too many open files" 3.0.M2 question
    see Technote 10981
    -----Original Message-----
    From: Jean-Paul Gabrielli [SMTP:Jean-Paul.Gabriellisema.fr]
    Sent: Monday, September 25, 2000 11:02 AM
    To: zeForte-users
    Subject: (forte-users) [UNIX] "Too many open files" 3.0.M2 question
    Hi,
    running a server partition that reads a configuration file,
    and apparently doen't close it after, I have that exception:
    SYSTEM ERROR: System Error: Too many open files, opening '....'with mode
    'r'
    Class: qqos_FileResourceException
    1) Is there such a limit, or does this rely only on the OS one ?
    2) How is this error not trapped, as I only got itinteractively, whereas
    my server log does a exception trap/segmentation fault,
    thanlks
    j-p
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe,send in a new
    email the word: 'Unsubscribe' to:
    forte-users-requestlists.xpedior.com
    >
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

  • Admincm.cmd cant open on PCM and schedule tab drop down disabled

    I installed PCM 13 successfully and did not received any error, MSServer 2008 was installed including all database. Im running also the PCM without any problem in internet explorer, admin and user logon. PCM is working fine except on connection from PCM-P6. I did configured the P6 and its fine. but on PCM, when i right click on the project title for project settings, the schedule tab is disbaled on schedule where supposed to have a drop down list. I check all the forums and it says that it can be configured using the adminmc.cmd that can be seen at the contract management installation folder. but even the admincm.cmd cant open. it just open a dos window but close for about 1 second. I tried to capture the image for you to see it
    http://i149.photobucket.com/albums/s59/blade052003/PMCPROB.png
    can anyone help me?
    thanks in advance

    can anyone help me on this?did i missed something???

  • UNIX command to open applications

    I'm looking for a UNIX command to open any application on a client machine.
    I am also looking for a command to set the time of each machine to use a Network Time Server.
    Any help would be appreciated. Thank you.

    open /Applications/path...
    e.g.
    open /Applications/Safari.app
    time server:
    # turn on network time and designate a network time server.
    systemsetup -setusingnetworktime on;
    systemsetup -setnetworktimeserver time.apple.com;
    the time unix commands are available as a template from the send unix command window.

  • How do you open the door on a Late 2013 27" iMac to add more RAM ?

    I ordered an additional 8GB of RAM before I received my iMac, but now that I have it and ready to add the extra RAM, I can find no mention anywhere of how you go about opening the door on the back of the iMac to access the RAM. Reminds me of the first Systems Analysis lecture I attended which was all about how to write a manual, for example on how to light a cigarette. The first candidate up read out his instructions and they seemed perfect until the instructor told him he hadn't mentioned opening the box of matches.

    Installing memory on the new iMacs are a PITA plus a few
    The first thing you should do is to unplug the iMac & everything else you have attached to it including the keyboard.
    Place the iMac facedown on something soft (couch).
    Just below the power cord connection you will see a square box.  It pops open if you have the strength of Arnold Schwarzenegger.
    With Arnold's strength, you will need to push the RAM into the slots which is no easy task.  Make sure you hear a CLICK!  The "click" confirms the RAM has been seated correctly.
    CLICK CLICK----> iMac (2012/2013) PDF Manual
    GOOD LUCK!  You're gonna need it. 

  • Are Tabs for open apps available on MacBook Pro

    I'm used to XP but recently got a used MacBook Pro running Snow Leopard.  I'm thinking of upgrading to a newer model with either Maverick or Mountain Lion. Using the used MacBook I was disappointed that tabs for apps that were open but not being used did not appear at the bottom of the screen as in XP. (Or at least I haven't figured out how)  I did note it's possible to use Cmd and Tab to show the open apps.  However I would prefer tabs if possible.  Are tabs availabe for open apps, such as Word, Excel and Chrome available in any of the newer Apple OS?
    Thanks for any info.

    Click the app's dock icon to bring its windows forward. You can see all of the application's windows by right-clicking the dock icon and you can view all windows at once by pressing the Exposé button (F3 by default).
    This system truly leaves Windows XP in the dust.

  • MB5B Report table for Open and Closing stock on date wise

    Hi Frds,
    I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
    Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
    Thanks
    Mohan M

    Hi,
    Please check the below links...
    Query for Opening And  Closing Stock
    Inventory Opening and Closing Stock
    open stock and closing stock
    Kuber

  • Template Builder (XML Publisher Report) for Open Office

    Hi,
    Do any body has any idea, if can have template builder for Open Office also, My company has un installed MS Office from my machine, and they dont have license now.
    Thanks and Regards,
    Nidhi Gupta

    Hi All,
    I think Oracle can provide a BI Publisher Software for the Open Office, since the licencing cost for MS Office is very high.
    "OpenOffice Writer" is a open source alternative to MS Word and can be used on Linux. If I am using Linux OS and have to work on BI Publisher templates then certainly I will have to install Windows or use WINE ( I donno how it works but heard of it)
    Other Oracle tools such as SQL Developer, etc are platform independent.. then why only BI Publisher is limited for windows/MS Office.
    Tim,
    Can you please answer..
    I think it should integrate with OpenOffice too!!
    Regards,
    - Ejaz
    [email protected]

  • Aging report for Open Invoice

    Hi All,
    I need to develop an Aging report for open invoice, there is no indication for open invoice or close invoice since we are using customise DS and DS from third party system. only one key flag we have is clearing date. so kindly let me know how to write the logic for this requirement.. can I use Customer exit for this? I have an Idea to do like
    first logic is
    *If Clearing date = blank than invoice is = open (by using of this logic we can get all open invoice).
    second logic
    total number of invoice = current date - document date.
    but I do not know how to implement this logic in BEx hnece kinnly advice me whether this logic can be work or suggest with different solution ples..
    Regards,

    hi,
    You can  check few default PO reports wid proper paramater in it
    or
    Can check table EKBE
    or
    Check PO history in the PO doc
    Or
    Check the ME80FN
    Regards
    Priyanka.P

Maybe you are looking for