Unix drive mounting and accessing with Receiver File(NFS) Adapter

Hi gurus,
Is it possible to access a mounted directory between a storage(unix) server and PI server, by using the File Adapter in NFS mode to write files to it?
Regards,
Gökhan

Hi,
>>Is it possible to access a mounted directory between a storage(unix) server and PI
why not?
in case your PI is on windows and storage on unix you just need
to have samba installed on your unix machine and you can access
unix with //server/folder/ from PI
Regards,
Michal Krawczyk

Similar Messages

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

I had a drive failure and lost the iWeb file along with other things. I did manage to save a lot of user file documents but I don't see or recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]

Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me. Only have a problem with one. Is there a fix?

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me between the locations. Only have a problem with one that inappropriately ejects when the Air sleeps (and only sometimes). Is there a fix? I've read others who believe that the problem is with the operating system (I'm using 10.9.2). But my problem suggests that it's with one of the LaCie's. Any suggestions about how to fix?

Lacie doesnt make HD, thats a Seagate inside the box.
Is there a fix?
Yes, get a 4TB max HD, 6TB drives are both new and have known issues, ...in fact so do most all 4TB drives.
my problem suggests that it's with one of the LaCie's
You mean Seagate
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed

How shall I use my IMac and MacBookPro, with synchronized files

Hi, how shall I use my IMac and MacBookPro, with synchronized files? I used to work at home and office with those to machines and finally always have different version of my documents. Is there any dispositive that I should use, where all my files are moving with me? os there is something to synchronized the computers using WiFi or bluetooth?

The following has instructions: OS X Mavericks: Share your Internet connection

What apple software allows me to open and work with excel files?

What Apple software allows me to open and work with Excel files?

Numbers, OpenOffice, Microsoft Office 2008 or newer, or similar products. Microsoft Office 2004 doesn't work in 10.7.
(86805)

Quality of service in Receiver file/ftp adapter (SAP PI 7.1)?

Hi,
    We are building an IDoc to File scenario in SAP PI 7.1, where a single incoming idoc will create three different output files. Also files must be created in target server in a specific order.
    Our first idea to ensure that files would be created following a specific order was that Message mapping (in Java) build target payload with all three files following expected sequence.
    In addition, receiver file/ftp adapter is setup with a dynamic variable to create each file with a different filename adding also timestamp.
    Testing the scenario, we see that three files are created in target server but when we sort them by creation date, it seems they don't follow always same sequence.
    Sometimes adapter creates File1, File2, File3; next time it created File2, File1, File3 and so on.
    Our problem is that files must be created always with a specific order and we cannot use BPM. Does anyone know if a receiver file/ftp adapter can be setup to create files following specific sequence (EOIO)?
    I know that sender file/ftp adapter can be setup with a quality of service, but I didn't find anything similar for Receiver file/ftp adapter.
    Suggestions will be welcome.
Kind Regards,
Aitor

Hi,
     First, thanks all of you for your quick answers. They were helpful because we learnt a new configuration setting.
     We tried your suggestions but they didn't really fix our problem.
     Finally interface has been re-designed and we will not have to apply this logic, so no issue from our side.
     However, let me continue with this topic in case that somebody else will have the same issue, then it will be able to review this thread.
     When adapter created the files in the target directory (windows server), files had the expected timestamp in each filename. However, if we sorted windows directory contents by "Date Creation", files were sorted different that timestamp shows in the filename.
     For example, adapter created following files:
File1_20090325-115117-169
File2_20090325-115117-174
File3_20090325-115117-180
     But when we sorted windows folder contents, files were sorted as follows:
File2_20090325-115117-174
File1_20090325-115117-169
File3_20090325-115117-180
     It seems that timestamp was pre-assigned by the adapter, but when adapter created the files, it did it with a temporary name and finally assigns the filename. If a file size was bigger than other, maybe it takes more time and windows creation date is higher.
     If so, it means that adapter is not following same instructions as itu2019s indicated in "maintain order at runtime" checkbox.
     Do you know if there is any way where we can push also the order in the adapter as we did in interface determination?
Regards,
Aitor

Problems with classpath and accessing a specific file

I'm currently running an application using NetBeans (I know this is the Sun Forum but maybe someone can help). For those who aren't familiar with this IDE, whenever a project is created, a ProjectName folder is also created. Inside that folder are 5 new folders (*build*, dist, nbproject, src and test) as well as 2 new files (*build.xml*, manifest.mf). The dist folder contains the *.jar* file.
Seeing that this is an audio application, I am constantly working with audio files. In the ProjectName folder, I've created a sixth folder (*audiofiles*) were I load and save such audio files. To access a specific audio file, I do the following:
File audioExample = File("audiofiles" + File.separator + "audio.wav");When I run the project from the IDE there doesn't seem to be a problem. However, when I try to run the project by simply double-clicking the *.jar* file in the dist folder, the audio files can't be accessed. In order to be able to access them, I need to change the path:
File audioExample = File("C:\...\ProjectName\audiofiles\audio.wav");This seems to solve the problem temporarily, but if I decide to change to project folder location, I also need to change the path.
QUESTION:
What is the best way to access files so that they are not dependent on where the project folder is located? Do I need to modify the classpath or simply write the path in File(...) in a specific way? If I need to modify the classpath, how can I do so in Netbeans?
Thanks in advance.

DrClap,
Thanks for the reply. To answer your questions:
Naturally that depends on where you DO want to load from. Are the files in the classpath? Are they in the current working directory?
Some other directory where you can ask the user to point to? On a different computer?The audio files are located in a created folder in the IDE project folder. I know you mentioned that I should stop thinking about this as an IDE project but I don't know any other way to think about it. I'm kinda new to Java, and the only way I've learned how everything is structured is through the IDE project structure. I'm realizing that this is probably not the best way to go about as it doesn't allow me to have a good understanding of the Java file structure. What changes do I need to make in the way I view my IDE project to make it more into a deployed version?
I'm also having a hard time understanding the classpath concept. I've been under the impression that the classpath was simply the location of the packages and classes of a specific application. How could I check if the audio files are in the classpath?
Thanks in advance.

How to create multiple files with Receiver File Adapter in SAP PI 7.31 Java Stack

Dear Friends,
I am using Sender JDBC Adapter and Receiver File Adapter in Integration Flow in SAP PI 7.3 EHP 1 SP08 Java Stack environment. The requirement is that we need to create multiple files based on the row count in jdbc resultset. If there are 5 rows in resultset, we need to create 5 XML files with one row elements in one file. Similarly if there are 10 rows, we need to create 10 XML files.
So how can we create multiple files in this scenario. I tried placing a for loop in the Java Mapping as below in the transform method:
DynamicConfiguration conf = arg0.getDynamicConfiguration();
StringBuffer sbFileData = new StringBuffer();
for (int i =0; i < record.size(); i++ {
     . // Create XML for each row and Marshal the object into to the String Buffer
     String strFileName = "DC_" + new SimpleDateFormat("ddMMyyyyHHmm").format(new java.util.Date())+"_"+i+".xml";
     conf.put(KEY_FILENAME, strFileName);
     arg1.getOutputPayload().getOutputStream().write(sbFileData.toString().getBytes("UTF-8"));
     arg1.getOutputPayload().getOutputStream().flush();
So here I'm flushing the OutputStream for each record. But it's not creating the multiple file, instead it creates only one file will all record XMLs appended to each other.
Please let me know if I missing something or need to do some thing else.
Regards,
Shreyansh Shah

Hi
You can easily achieve this using graphical mapping. Create your target message type like below
MT_Target
Details 0 to 1
      Data 0 to 1
Source sample structure
<resultset>
<row>
<column-name>column-value</ column-name>
</row>
Then do the message mapping like below
map <row> with MT_Target
contant ----> Deatils
column-name ------>Data
In the signature tab of message mapping, choose the occurrence of your target message type as
0 to unbounded.
This will generate multiple files from multiple rows.
Let me know if you have any doubt.

Empty Message Handling with Receiver File adapter

Hi,
We were using the "Empty-Message-Handling" (status set to Ignore) of Receiver file adapter to stop a 0 KB file from being written to the specified directory.
However, inspite of this, a 0KB file continues to be written.
The specifications are given below-
File Construction Mode - Add Time Stamp
Put File - Directly
Empty Message Handling - Ignore
Maximum Concurrency - 1
File Type - Binary
Can anyone please help with this.
Thanks and Regards,
Shiladitya

HI,
In one of thread the same problem was coming. Just look at the thread.
Receiver file adapter creates empty files, Empty-Message Handling SP19
Or
Follow the weblog for the same requirement.
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module
Thnx
Chirag
Reward points if it helps.

Problem with receive files

Hello!
I have a problem receiving image files. Instead of receiving file, I receive a link to skype website with the file.

From Anna h Porubsky
Hello!
I have a problem receiving image files. Instead of receiving file, I receive a link to skype website with the file. and Noted my Skype is Locate In Angola NOT IN USA FLORIDA Need TO Be Corrected
Thankyou my Email : [e-mail removed for privacy and security]

Sender file adapter, file existence check in archive folder if exists rename the same and proceed with current file

Dear SAP Gurus
Interface flow:
File --> File and RFC.
We have a requirment where PI needs to check the file existency in archive folder and if there is a file already exists with same name we need to rename that file and archive the current file as is...
Note* Customer don't want to add time stamp!!!!
For ex today first message processed with file name "UBMO_delta20140626.xml" and archived as is- UBMO_delta20140626.xml
and customer sends a second file on the same day with same name(UBMO_delta20140626.xml) in this case before archiving PI needs to check whether there is a file exists already in archive folder or not if there is, then it should rename the same like(UBMO_delta20140626_1.xml) and proceed with current message processing and archive the same name(UBMO_delta20140626.xml).
Many Thanks in advance...
Nagesh

Hi Nagesh,
I think you can use the feature of run operating system command before message processing. you can refer the below wiki for information.
SAP XI File Adapter OS Command Line Feature - Process Integration - SCN Wiki
regards,
Harish

Sender System and Counter in Receiver file

Hi,
I have a requirement of having 'Sender Sytem ID' and 'Counter' in receiver flat file.
Please suggest, what is the best way to achieve this.
Scenario : ABAP --> PI ---> Legacy System
Proxy to File scenario
regards
Amol

Hi,
Please refer the following threads-
System ID in the user defined function
/message/686478#686478 [original link is broken]
As mentioned in the threads, use the method
System.getProperty("SAPSYSTEMNAME"); in udf for getting SYSID.
Counter??? DO you mean record counter..something like that??
You can use the standard count (statistic) or counter(arithmatic) functions for that.Please check the documentation for more help.

SQL Developer and Access with password issue

I have Windows 7 64bits, Developer Version 2.1.1.64 and Access 2007.
Created a MDB file added 2 tables, enabled de system tables and set a password.
I try to configure connection but it gives a "Not Valid Password" error.
I use on username: Admin
And the password I'd set.
What could be the error?
I unset the password and it works fine.

The password I had set was Database password and not user login so maybe there's no hope on this one, for now...

We bought a reconditioned IMac and time capsule,about a month ago the hard drive died and only left our files on the capsule which could not be retrieved from the time capsule so it got stored as a file on the operating system

Our IMac's hard drive died and we thought great we bought a time capsule to back up the immages and files,except when we had the hard drive replaced the time capsule did not recognize the newer opperating system and would not reboot the files back,so the apple store tech loaded them into a file folder and loaded them to the main screen and erased the time capsule,the problem now is how to load this file back permenantly and watch video's that are stored,when in I Photo when I try to view video content I get a message stating that I may need to download more software to support this format.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Unix drive mounting and accessing with Receiver File(NFS) Adapter

Similar Messages

Maybe you are looking for