Unix Shell to execute photoshop scripts

Hi,
I am trying to execute .jsx Photoshop Scripts using a unix shell. Can anyone please guide me what the correct command would be?
Thanks

What Unix system do you have Photoshop installed on to run these
scripts?
Aandi Inston

Similar Messages

  • Execute photoshop script via illustrator cs5

    Hi
    Is it possible to execute Photoshop script via illustrator
    I have 2 different script
    script 1 work in illustrator with eps file and export as jpeg
    script 2 where i want to trim the exported jpeg for illustrator in photoshop and save it back
    I have 2 differnt script with me
    can anyone help me to club both and run at same time..
    Thank you
    Appu

    use BridgeTalk to have Illustrator talk to Photoshop, here's a sample by Mark
    Illustrator script to open file in Photoshop
    or use inter app communication
    open PS, open a document
    // start your illustrator script
    var Aidoc = app.activeDocument;
    continue with your script
    // when ready, call your photoshop script
    // this sample alerts the active document name and closes it
    photoshop.executeScript("alert('document name: ' + app.activeDocument.name); app.activeDocument.close()");

  • Error while trying to execute a unix shell script from java program

    Hi
    I have written a program to execute a unix shell script in a remote machine. I am using J2ssh libraries to estabilish the session connection with the remote box.The program is successfully able to connect and authenticate with the box.
    The runtime .exec() is been implemented to execute the shell script.I have given below the code snippet.
    try {
         File file_location = new File("/usr/bin/");
         String file_location1 = "/opt/app/Hyperion/scripts/daily";
         String a_mib_name = "test.sh";
         String cmd[] = new String[] {"/usr/bin/bash", file_location1, a_mib_name};
         Runtime rtime = Runtime.getRuntime();
         Process p = rtime.exec(cmd, null, file_location);
    System.out.println( "Connected to the server1" );
    BufferedReader br = new BufferedReader(new InputStreamReader(p.getInputStream()));
    String line = br.readLine();
    while(line !=null)
    System.out.println(line);
    line = br.readLine();
    br.close();
    p.getErrorStream ().close ();
    p.getOutputStream().close();
    int retVal = p.waitFor();
    System.out.println("wait " + retVal);
    //session.executeCommand("ls");
    catch (IOException ex) {
    I get an error message
    Connected to the server
    java.io.IOException: Cannot run program "/usr/bin/bash" (in directory "\usr\bin"
    ): CreateProcess error=3, The system cannot find the path specified
    at java.lang.ProcessBuilder.start(Unknown Source)
    at java.lang.Runtime.exec(Unknown Source)
    at SftpConnect.main(SftpConnect.java:143)
    Caused by: java.io.IOException: CreateProcess error=3, The system cannot find th
    e path specified
    at java.lang.ProcessImpl.create(Native Method)
    at java.lang.ProcessImpl.<init>(Unknown Source)
    at java.lang.ProcessImpl.start(Unknown Source)
    I am sure of the file path where the bash.sh and test.sh are located.
    Am i missing something? Any help would be greatly appreciated.
    Thanks
    Senthil

    Hi, I am using a simple program to connect to a RMI server and execute shell script. I use the Runtime.exec aommand to do the same.
    The script is sh /tmp/pub/alka/test.sh /tmp/pub/alka/abc/xyz/ul ul
    The script when run from the server, gives no errors. But when ran using rthe above method in java, gives errors as follows,
    Mycode:
    String command = "/bin/sh /tmp/pub/alka/test.sh /tmp/pub/alka/abc/xyz/ul ul";
    Runtime rt = Runtime.getRuntime();
    Process proc = rt.exec(command);
    int exitVal = proc.exitValue();
    System.out.println("Process exitValue: " + exitVal);
    java.io.IOException: CreateProcess: /bin/sh /tmp/pub/alka/test.sh /tmp/pub/alka/abc/xyz/ul ul error=3
         at java.lang.ProcessImpl.create(Native Method)
         at java.lang.ProcessImpl.<init>(Unknown Source)
         at java.lang.ProcessImpl.start(Unknown Source)
         at java.lang.ProcessBuilder.start(Unknown Source)
         at java.lang.Runtime.exec(Unknown Source)
         at java.lang.Runtime.exec(Unknown Source)
         at java.lang.Runtime.exec(Unknown Source)
         at DecryptTest.main(DecryptTest.java:18)
    Can anyone please help

  • Error while executing unix shell script from java program

    Hi All,
    I am trying to execute unix shell script from a java program using Runtime.execute() method by passing script name and additional arguments.
    Code snippet :
    Java Class :
    try{
         String fileName ="test.ksh";
         String argValue ="satish"; // value passed to the script
         String exeParam = "/usr/bin/ksh "+fileName+" "+argValue;
         Process proc = Runtime.getRuntime().exec(exeParam);
         int exitValue = proc.waitFor();
         sop("Exit Value  is : "+exitValue);
    catch(Exception e)
    e.printStackTrace();
    }Test.ksh
      export -- application realated paths..
      nohup  abc.exe 1> test.log 2>&1;
      $1
      exit.By running the above java class , i am getting exit Value: 139 and log file test.log of 0 bytes.
    when i am running the same command (/usr/bin/ksh test.ksh satish) manually, it's calling abc.exe file successfully
    and able generate the logs properly.
    Pls let us know where exactly i am stuck..
    Thanks in advance,
    Regards,
    Satish

    Hi Sabre,
    As per the guidelines provided by the article, i had done below changes..
    InputStream is = null;
    InputStreamReader iStreamReader = null;
    BufferedReader bReader = null;
    String line = null;
    try{
    String fileName ="test.ksh";
    String argValue ="satish"; // value passed to the script
    String exeParam = "/usr/bin/ksh "+fileName+" "+argValue;
    Process proc = Runtime.getRuntime().exec(exeParam);
    is = proc.getErrorStream();
    iStreamReader = new InputStreamReader(is);
    bReader = new BufferedReader(iStreamReader);
    System.out.println("<ERROR>");
    while((line = bReader.readLine()) != null)
    System.out.println("Error is : "+line);
    System.out.println("</ERROR>");
    int exitValue = proc.waitFor();
    sop("Exit Value is : "+exitValue);
    catch(Exception e)
    e.printStackTrace();
    Now , it's showing something like..
    <ERROR>
    </ERROR>

  • Unix shell script should execute (run) webI report.

    Hi
    i am new to BO.
    I have webI reports developed, can any one tell me how  to execute a webI reprot using unix sheel script.

    Hello Vijaya,
    Thatu2019s an interesting question.  BusinessObjects does not supply any native UNIX shell interfaces or scripts for running/executing Webi Reports. Not knowing what it is you are exactly trying to accomplish Iu2019ll give a very general answer.
    I have had several customers who had requirements to have external systems execute, refresh and export reports in BusinessObjects Enterprise before.  These external systems could execute a shell script so what they have ended up doing is creating generic Java applications that use the BusinessObjects BOE Java SDK. Once they had the Java application created their external application could execute a java directory or they created shell wrappers that were called.  So what you could do is create some Java applications that wrap the functionally you need and then execute those from the command line.
    With that said there is a lot of functionally built into BusinessObjects Enterprise.  If I was to know exactly what you were trying to achieve I might be able to point you in the direction of an existing product feature.
    Cheers,
    David.

  • How to execute unix shell script from Java ...

    Hi,
    Anyone know how to execute unix shell script from Java?
    Suppose I have several shell scripts written in perl or tcl or bash.
    I just want to catch the output of that script.
    Is there any ready to use module/object for this?
    Please let me know, this is quite urgent for my study assigment.
    Thanks in advance,
    Regards,
    me

    Look up Runtime.exec()

  • How to execute unix shell script in webdynpro?

    hi all,
      We have some iquirement of executing script in unix.If anyone know How to execute unix shell script in webdynpro?
    best regard
    reefish

    Ree,
    1. Find SSH client for windows, then execute SSH with Runtime.exec() on local host with arguments like remote host, auth, command to execute etc.
    2. Get SSH client in Java and execute SSH commands on remote host using pure Java API.
    Don't ask me for links, Google works today, I checked this
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net

  • How to execute a select statement in unix shell script

    Hi,
    How to execute the below statement in unix shell .
    select count( ID) into v_count from tbl_data1
    where ID =V_ID;
    thanks
    BCJ

    Thanks for the reply.
    few more doubts,
    the V_ID value is a user input getting inside the unix script, so how can i pass the value in to the a.sql.
    also needs the v_count value inside the unix script for further process.actual requirement is like,
    declare
    v_count number;
    begin
    select count( ID) into v_count from tbl_data1
    where ID =$V_ID;
    if v_count>1 then
    process 1;
    else
    process2;
    end if;
    end;
    thanks a lot

  • RFC_REMOTE_PIPE is Returning 1 alwasys and not able to execute Unix shell script

    Hello All,
    I am trying to execute a simple unix shell script from ABAP.
    What I did so far..
    1. created a test.sh file  with single command echo "Hello".
    2.  placed this file on application server /Usr/sap/test.sh
    3. executing ABAP program which as FM RFC_REMOTE_PIPE
    CODE:
    CALL FUNCTION 'RFC_REMOTE_PIPE'
       DESTINATION 'SERVER_EXEC'
    EXPORTING
       command  = lv_command
       read          = 'X'
    TABLES
       pipedate    =  lt_stdout
    EXCEPTIONS
    system_failure  = 1
    communication_failure = 2.
    if i populate lv_command  = echo "hello" it works fine
    if i give .sh file path in lv_command it is not working. it returns 1.
    Please help...
    I was searching SDN i found that rfcexec service should be enabled... how do i check that..
    i checked t code  \SMGW , i don't see any output...
    i checked FM GWY_READ_CONNECTED_SYSTEMS, i don't hsee anyting related to unix...
    Please suggest.

    I resolved the issue.
    It was issue with permission.
    Script file should have full permission ( Mode 777)..
    Thanks everyone.

  • R/3 to other oracle system Unix Shell scripts Execute

    Hi,
    Here SAP 4.7 version, is it any possibility to run/execute other oracle system Unix shell scripts from sap program?
    With Regards,
    Anil

    ...yes,
    1.define own external command (sm69)
    2. run this command from your ABAP code by callig function module SXPG_COMMAND_EXECUTE
    regards,darek

  • Executing Unix shell scripts with DBMS_SCHEDULER

    I have the following Unix shell script create_backup_file.sh:
    #!/usr/bin/ksh
    /usr/bin/ssh [email protected] /usr/bin/touch/app_home/home/trotestbat/scripts/TRO_batch_complete_`date +%d-%m-%Y-%H%M`
    If I execute this from the command prompt it creates the file on the remote server.
    I've used dbms_scheduler to try and execute this from Oracle:
    BEGIN
    SYS.DBMS_SCHEDULER.CREATE_PROGRAM
    program_name => 'CREATE_TRO_BACKUP_FILE'
    ,program_type => 'EXECUTABLE'
    ,program_action => '/APP/TORPEDO/DTE/SCRIPTS/create_backup_file_tro.sh'
    ,number_of_arguments => 0
    ,enabled => TRUE
    ,comments => NULL
    SYS.DBMS_SCHEDULER.CREATE_JOB
    job_name => 'DTE.TESTAGAIN'
    ,start_date => TO_TIMESTAMP_TZ('2010/05/17 16:09:24.710789 +01:00','yyyy/mm/dd
    hh24:mi:ss.ff tzh:tzm')
    ,repeat_interval => NULL
    ,end_date => NULL
    ,program_name => 'DTE.CREATE_TRO_BACKUP_FILE'
    ,comments => NULL
    END;
    The problem I have is that scheduler executes the shell script and creates the file but it never completes the job. The status of the job is permanently 'RUNNING'. Why is the scheduler not returning a completed status?

    the "infinite" script is usually caused by a prompt (script pauses for a user input).
    Please keep in mind that executing script via scheduler is not the same as manually via prompt.
    1. the script runs as ORACLE user ID (or whatever you specified using DBMS_SCHEDULER.create_credential or/and "$ORACLE_HOME/rdbms/admin/externaljob.ora")
    2. the environment variables are probably not the same.
    My wild guess is that you never ran SSH using "oracle" UID and thus it prompts for permission to add the remote computer’s fingerprint to the user’s ~/.ssh/known_hosts file - since it is a script, it just hangs and waits for input.
    Did you try to login to unix box as oracle uid and run the script manually?

  • UNIX Shell Script - Maxl - executing 4 Maxl script at the same time

    Hi,
    I wrote a UNIX shell script that basically call 4 maxl script to execute at once. But it seem to executing 2 maxl and then it goes to the last script. So, script 4a,4b,4c, & 4d should execute all at the same time. But for some reason at random only two script is being executed. And then it would go to script 5. Anybody have any answer to why it's doing this? Or is it something i'm doing it is incorrect help please?
    I'm running essbase 11.1.2
    Here is my script:
    #!/bin/sh
    # Maxl script to run
    export MAXL_SCRIPT_1=/hyperion/..../script1.maxl
    export MAXL_SCRIPT_2=/hyperion/..../script2.maxl
    export MAXL_SCRIPT_3=/hyperion/..../script3.maxl
    export MAXL_SCRIPT_4a=/hyperion/..../script4a.maxl
    export MAXL_SCRIPT_4b=/hyperion/..../script4b.maxl
    export MAXL_SCRIPT_4c=/hyperion/..../script4c.maxl
    export MAXL_SCRIPT_4d=/hyperion/..../script4d.maxl
    export MAXL_SCRIPT_5=/hyperion/..../script5.maxl
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_1 "
    wait
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_2 "
    wait
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_3 "
    wait
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_4a " &
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_4b " &
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_4c " &
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_4d " &
    wait
    /usr/bin/sh -c "cd /hyperion/...../bin/; ./startMaxl.sh $MAXL_SCRIPT_5 "
    echo Done.
    Thanks,
    Mark

    Thanks!
    I just noticed that the problem was due to something *within my application*.
    I explain:
    i built an application and I want it to be activated by my script.
    I have another script running, but this is not a problem as I discovered later...
    The problem is indeed that my script activates my application, but even when my application is opened, so it succeded, it stays hanged.
    I found that the same thing does not happen with regulare applications, such as Safari or iTunes, so i narrowed down the probglem to my application...
    Is there something i should do to it?
    I checked the "scriptable" checkbox inside my application plist, but the result is still the same...

  • Executing java from unix shell script

    Hi, I am trying to execute java program from a unix shell script and the program has a command line parameter. I have tried in ways like
    /opt/java1.4/bin/java CollExtractLoadProcess /home/inbox/archive/file_name
    /opt/java1.4/bin/java CollExtractLoadProcess "/home/inbox/archive/file_name"
    /opt/java1.4/bin/java CollExtractLoadProcess '/home/inbox/archive/file_name'
    /opt/java1.4/bin/java CollExtractLoadProcess file_name
    No matter how I execute it gives me the following error
    Exception in thread "main" java.lang.ClassFormatError: CollExtractLoadProcess (C
    ode segment has wrong length)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    3)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    Could someone please let me know what is the correct way of doing this?
    Thanks.

    Sounds like you either have a corrupt class file or you're using an older version of the JVM to try to execute classe that were compiled for a newer version.

  • Execute stored procedure from Unix shell script

    My current method of executing stored procedures (wpl_1 and wpl_2) from a unix shell script is as follows:
    <<wpl.sh>>
    sqlplus user/password @/home/oracle/scripts/wpl.sql
    <<wpl.sql>>
    set serveroutput on size 1000000
    set timing on
    execute wpl_1('0000010676','~')
    execute wpl_2('0000010676','~')
    execute wpl_1('0000010236','FIX')
    execute wpl_2('0000010236','FIX')
    exit
    Question: Is it possible to combine the two scripts (unix and oracle) together?

    A little rusty on this, but this may work:
    My current method of executing stored procedures
    (wpl_1 and wpl_2) from a unix shell script is as
    follows:
    <<wpl.sh>>sqlplus user/password @/home/oracle/scripts/wpl.sql << EOF
    set serveroutput on size 1000000
    set timing on
    execute wpl_1('0000010676','~')
    execute wpl_2('0000010676','~')
    execute wpl_1('0000010236','FIX')
    execute wpl_2('0000010236','FIX')
    exit
    EOF
    >
    Question: Is it possible to combine the two scripts
    (unix and oracle) together?

  • Execute a unix shell script from forms9i

    Hi ,
    I would like to execute a unix shell script form a form when they pressed a button. The forms server is on Linux machine. I tried but when I pressed the button nothings happen. Could some one please help me how I could get working.
    Is there is a way I could execute the unix shell script from PL/SQL proceudre or package.
    Please some one help me.
    Bain

    You would not expect to see anything happening because the
    script cannot directly send output to the web form. However, you can get it to write output to a file and use web.show_document in the form after the host command to display the file and see the output.

Maybe you are looking for