Unknow Error: Tried all suggestions
For the past two days, I have tried to publish to my. iWeb pages and I receive the following error:
Publish Error.
An Unknown error occurred.
I have tried opening the package contents of my domain and trashed:
PrePublishState.plist (this turns the icons blue, but I still cannot publish) and assessts (I replaced with backups when this did not work).
Under the library folder preferences, I tried trashing the apple.iWeb.plist and apple.DotMacSync.plist (again I had backups).
I have a domain backup on a CD too.
I have rebooted; ran the activity monitor (where I see small red bits); checked keychains a ( appears to be fine); I tried uploading to iDisk and that's fine too; republished all pages to Mac. It seemed to save, but not to publish. Nothing on the actual site updates.
Any clues? I did try the suggestions at: iWeb Help: http://karreth.com/iweb/22070571-B241-4C09-840B-288E0EC491F6.html
And if I follow those steps I CAN publish a totally new site, but when I replace my domain and restart, I still get the same error message.
I am not over my disk quota.
Any help would be appreciated.
G5 Mac OS X (10.4.8) Dual
G5 Mac OS X (10.4.8) Dual
iWeb might say there's an unknown error when Publishing but if you open Activity Monitor and look at your Network Traffic you will see that your site is still in fact uploading.
Keep iWeb open until there is no more uploaded network traffic in Activity Monitor then close iWeb and you will see your site is in fact Published. This may take several hours depending on the speed of your network (internet connection), processor, the size of your site and demand on .mac servers both by yourself and others, and/or other factors unmentioned.
After trying the recommended method delete the PrePublish.plist file from your Domain package contents, empty your Browser Cache files and reload your page to view the successful Published changes on your site.
Just remember sometimes when iWeb says there's an error Publishing there really isn't an error. Leave iWeb open until Acivity Monitor says there's no more information being uploaded (remember this may take a whole night)
[email protected]
Similar Messages
-
Getting error 107 downloading after effects. Have tried all suggested solutions
Need assistance with downloading after effects trial as I keep getting error 107. Have tried all suggested solutions. Thanks
It isn't the installation of the Adobe Download Assistant which can cause this problem it is where you select to download the install files too. The Adobe Download Assistant would be installed to your Program Files/Applications folder and install files would be downloaded to your user folder, by default, or your desktop.
Alternately you can intitate a direct download by following the steps listed at http://forums.adobe.com/thread/981369. -
BIG QUESTION!!!!
My mini ipad has frozen and won't let me restore showing 3014 error code. I have tried all suggestions to correct error and now is frozen saying connect to itunes which just shows the error message.. Can't i just reboot it somehow?Hi annababs,
This article has troubleshooting specific for error 3014:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
If that does not work, this article may be able to help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Take care,
- Ari -
Hi
When I start excel and open any workbook a 'ghost' work book opens it doesn't contain cells and is just greyed out. When I am working on a document whenever I start to write a formula the ghost wbook opens and I cannot see the original document to complete
the formula. If I open multiple workbooks I sometimes get a ghost workbook for each doc that is open - after a while I get error message to say not enough reources to do even simple tasks like save work or open a document.
I have posted on several forums and tried all suggested solutions without luck - this is really preventing me from using excel which I need daily. Personally though I am only intermediate user I think it may have something to do with a workbook that I downloaded
that had macros in it but I cant be sure
Any help greatly appreciated
Thanks
DaveHi Dave,
First make sure have installed the latest update. Second, we can repair Office 2013 from Control Panel > Programs and Features. Third, open Excel 2013 in safe mode, if it works fine, disable some 3rd-party application add-ins.
Could you please share a screenshot of this “ghost” workbook and upload it to OneDrive? I’ll analyze it in detail as soon as accessing it.
If there is anything about this issue, don’t hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support
teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office programs. -
Windows 7 PC. 64 bit. Have tried all suggested solutions on forum and community. Other ideas?
Conversion Log ends with "flattening 3gpp files, removing j2k files...An error was encountered in the sqlite database: unable to open database file
conversion log: Conversion Failed.Log says “unable to convert SQLite db” and then “Conversion failed”. This is before it does anything with specific images. The line right before the above is “gpp files flattened . . .” which I believe are sound files
: Cheri Mason
Unable to convert PSE11 catalogs to PSE13 Organizer. Windows 7 PC. 64 bit. Have tried all suggested solutions on forum and community. Other ideas?
created by nealeh in Photoshop Elements - View the full discussion
What does the log file say? - Photoshop Elements catalog conversion failure.
Cheers,
Neale
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6850794#6850794
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Real problem tried all suggested methods none worked
Ok my problem is that my iPod has a sad face and shuts itself off. Not only that but when connected to charge it just sits there with the charging thing not moving. Also computer won't recognize ipod at all, as if it doesnt exist. when i try to put it into disk mode it just waits a while and shuts off. doesnt go into disk mode just shuts off. when i connect it for updater it doesnt sense ipod at all and i have waited hours before posting this. i have tried all suggestions on support line but the problem is how do i restore when the comp wont read it. i would highly appreciate help because i really dont want to pay 59.95 for extra warranty and 30 for repair. i dont know if this helps but it is a replacement iPod. also another note i did not charge iPod for several (about 10) days.
PLEASE HELP
Dell 8300 Windows XPThe Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm -
iPad is not recognized in iTunes. Just installed Mac OS X 10.6 and have a brand new iPad2. Tried all suggestions in the iPad manual without success.
Quit iTunes, restart your Mac and then restart the iPad and see if the iPad is recognized after that. If not, you can look through these articles.
iOS Device not Recognized in Mac OS X
If you are running Snow Leopard 10.6 ....
Device not recognized after a restart
If either site gives you a "We're Sorry" error message - just reload the web page. The sites do work. -
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I have bee using firefox for many years and seemed to have lost it. I downloaded again about 5 times,have tried all suggestions in the forums nothing worked.The only thing is I tried to recover my Profile default fold and it is missing. What can I do? I miss using firefox and would like you back
Hello All.
I've been using Firefox for a long time with a great pleasure of course. I've got today the same problem as you: my profile can't be loaded, missing or inaccessible. I tried all solutions but it was not OK.
Finally, as yesterday I've played with hiddens files in my home directory, I noticed that my "/home/myuser/.cache" was marked with a little padlock: it was access protected. So I just execute:
'''sudo chown myuser /home/myuser/.cache -R '''
and now Firefox is working fine.
I hope this way will be useful for you
Thanks -
Regarding Firefox 4 does not ask to save tabs and windows on exit even after trying all suggestions
After installing Firefox 4, Firefox would no longer ask to save tabs and windows on exit. Even after trying all suggestions to resolve the problem, the problem continued. Under the corrupted files suggestion to rename two files, that also did not help. The original file names would be recreated automatically, so both file name versions would exist in that folder. NOTHING resolves the problem.
Unfortunately, since that is a very desirable feature I, like other people who do not like Firefox 4, have gone back to an earlier version of Firefox.You can set the warn prefs on the about:config page to true via the right-click context menu or toggle with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
* browser.startup.page , seehttp://kb.mozillazine.org/browser.startup.page (1 or 2)
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
You can use "Firefox > History > Restore Previous Session" to get back the previous session.<br />
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time" -
I have iPod Touch 4th Gen. I can purchase game token in 1 game but Not the other!! Get message in other game: "Purchase couldn't be completed...unable to connect to iTunes". I've tried ALL suggestions...PLZ help.
See:
Have yo tried when connect to another wifi network?
Can't connect to the iTunes Store
For the future, saying " I've tried ALL suggestions" provides with zero information as to what you did try -
I tried all suggestions fo a grayed out wifi toggle and nothing seems to be working. Any other suggestions?
I had this problem last month. I ended up having to get a new iPhone 4S. It's a very, very common problem and in my opinion it should be covered by Apple for free since it is so popular and is an obvious hardware defect especially in the iPhone 4S.
So I suggest you order a new iPhone ($230 with no warranty) ($50 with Apple Care+). And while you wait for your new iPhone to come you could back up your iPhone and try some of the YouTube fixs. I put mine in a plastic bag (off with no air in the bag) in the freezer for 30 minutes, pulled it out, turned it back on, let the iPhone thaw out in the bag, and it then worked again for over a week before it died again. But I would only try that if you knew you had a new iPhone on the way. My cellular, Wi-Fi, and Bluetooth all went out so I had nothing to lose. -
Installation window (black background) consistently freezes solid at either 25% or 30% progress. Have tried all suggested means of sorting this (including uninstalling) several times. No joy. OS 10.10.2 Yosemite version. Any suggestions?
I just found this....and it works....and it's legit.
1. Reboot computer or use Activity Monitor to force quit any prior Adobe Flash installation process that may be still running
2. Download Adobe Flash update using this link (assuming you are using Safari or Firefox): Flash Player for Safari and Firefox - NPAPI
3. Mount flash player by clicking on flash drive icon on desktop
4. Right click on Flash file
5. Choose 'Show Package Contents'
6. Open 'Contents' then 'Resources'
7. Run file 'Adobe Flash Player.pkg'
8. Reboot computer. -
I'm using macbook pro 15" 2009 OS 10.9
my apple id is still disabled even though i changed my password. I have tried all suggestion and still disabled. any advice?my apple id is still disabled even though i changed my password. I have tried all suggestion and still disabled. any advice?
If your Apple ID has been disabled for security reasons, you have to contact Apple Support. Only the Account Security Team can activate it again. See this webpage on how to contact Apple Support in your country: There are either telephone numbers given or an email form:
Apple ID: Contacting Apple for help with Apple ID account security
Explain, that you need help with an account security problem.
You can also try to email the iTunes Support using this form:
https://ssl.apple.com/emea/support/itunes/contact.html -
This started after the latest security update for Firefox26 self installed. I have tried all of the suggested fixes; restarting in default mode, un-installing then re-installing the Ant video down loader etc all to no avail. How do I fix this?
Ant Video Downloader 2.4.7.11 is a Firefox add-on that doesn't look like it's been updated yet for Firefox 26. See https://addons.mozilla.org/en-US/firefox/addon/video-downloader-player/
The best I can suggest is to contact the add-on developer.
Maybe you are looking for
-
I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync op
-
I do not have SOUND after downloading IOS7. I can use earbuds, but no sound when not plugged in. I cannot play music, hear a movie on iTunes or Netflix. Sound works for incoming calls, msgs, etc, but NO sound for music or movies. HELP!
-
Multiple Breeze presentations in one "Course"
We need to take multiple Breeze presentations grouped together into separate sections of a single online "course" that can perform basic tracking with a our LMS. Our LMS does not support multiple au AICC courses so that kind of leaves us with SCORM.
-
Excise tax indicator maintainance
Dear all i have problem with excise tax indicator maintainance.i given the exact problem below Exc. tax ind. not maint. for 1 1 - please maintain. how can i maintain this? regards ajit jaiswal
-
Where are the bpelc and related ant tasks documented?
Hi, Can anyone tell me where the soa suite-related ant tasks are documented? I only found a little bit of information and some examples in the developers guide. Thanks, Mark Nelson