Unknow gbic

cisco catalyst 6509
show port #
* = Configured MAC Address
Port Name Status Vlan Duplex Speed Type
3/9 connected 132 full 1000uknown GBIC
show test 3 is (all pass)
show moudle 3 is OK
why unknow gbic message appear ?

sh module
Mod Slot Ports Module-Type Model Sub Status
3 3 16 1000BaseX Ethernet WS-X6516-GBIC no ok
Mod Module-Name Serial-Num
3 Sxxxxxxxxxx
Mod MAC-Address(es) Hw Fw Sw
3 00-01-c9-d9-d8-1c to 00-01-c9-d9-d8-2b 2.0 6.1(3) 7.6(6)
sh sprom 3/9
3/9 GBIC Serial EEPROM data invalid.
0000 0000 0000 0000 0000 0000 0000 0000 0000 ................
0010 0000 0000 0000 0000 0000 0000 0000 0000 ................
0020 0000 0000 0000 0000 0000 0000 0000 0000 ................
0030 0000 0000 0000 0000 0000 0000 0000 0000 ................
0040 0000 0000 0000 0000 0000 0000 0000 0000 ................
0050 0000 0000 0000 0000 0000 0000 0000 0000 ................
0060 0000 0000 0000 0000 0000 0000 0000 0000 ................
0070 0000 0000 0000 0000 0000 0000 0000 0000 ................
0080 87FB 5950 802E 8AC4 0000 0003 0000 0000 ..YP............
0090 87FB 5880 8093 E9F8 0000 0003 8027 9734 ..X..........'.4
00a0 87FB 5950 8094 7934 0000 0007 0000 0000 ..YP..y4........
00b0 0000 0010 0000 0003 8027 85F0 8027 8564 .........'...'.d
00c0 8380 C116 8380 C114 800C ED74 0000 0002 ...........t....
00d0 87FB 5910 8380 C114 FFFF FFFF 0000 0001 ..Y.............
00e0 800C A0D4 800C A0BC 87FB 58D8 8040 683C ..........X..@h<
00f0 81B0 7558 0000 0000 81B0 7558 0000 0000 ..uX......uX....

Similar Messages

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

My macbook pro 13" shows up as unknow on networks! why and how do i fix it?

Hi ust wondering why my MBP shows up as unknow on newtworks. please tell me how to fix it
-Max

hmmits says thats my name for local conections, but for external conection unknow (mac adress), <-- how do i change it?

The Attempt to burn a disc failed. An unknow error occurred (4000)

Itunes will start to burn and then stop and state that
"the Attempt to burn a disc failed. An unknow error occurred (4000)"
while burning a data Dvd back up
Here is the Run CD Diag
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
MSI MS-6712
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Cdr4_xp (7.5.0.50),
UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (7.5.0.50),
Video Driver: NVIDIA GeForce4 MX 440\GeForce4 MX 440
IDE\DiskWDCWD800JB-00ETA0_____________________77.07W77, Bus Type ATA, Bus Address [0,0]
IDE\CdRomJLMSXJ-HD166S__________________________DS1A___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONDVDRW_SOHW-1633S________________BS0K___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: JLMS XJ-HD166S, Rev DS1A
Drive is empty.
E: LITE-ON DVDRW SOHW-1633S, Rev BS0K
Audio CD in drive.
Found 14 songs on CD, playing time 56:45 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:28:04
Track 3, start time 09:32:06
Track 4, start time 13:04:38
Track 5, start time 16:57:06
Track 6, start time 20:43:48
Track 7, start time 23:48:03
Track 8, start time 29:28:09
Track 9, start time 34:28:49
Track 10, start time 37:45:69
Track 11, start time 41:23:33
Track 12, start time 44:45:19
Track 13, start time 47:53:52
Track 14, start time 51:19:58
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8 16 24 32 40 48.
The drive DVDRW speeds are: 8 16 24 32 40 48.
The last failed data CD or DVD burn had error code 4000(0x00000fa0). It happened on drive E: LITE-ON DVDRW SOHW-1633S on DVD+R media at speed 16X.
please help
Clone Windows XP

try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.

What is the part number for the mini gbic?

I need to replace a mini gbic from a MDS-9124. I tried very hard to find the part number but it is not clear. There are 2 part numbers writen in the gbic, but I could not confirm any of it. The part numbers that is writen are DSSFP4GSW-4 and the other is 102195-01. If someone can help I would really appreciate.

At the switch, you could use the << show int fc1/x transceiver details >> command which would give you the programmed part-number.
The DSS... sticker is likely the Cisco partnumber.
It's perhaps a good habit to do at least once execute a full "show tech" of each (new_ switch and save the output. This would give you all the (least) information for the future. . . reproducing is always difficult if the part or switch is not available (anymore) ;) .
Regards, Peter.

I Tunes cannot connect to i Tunes store. An unknow error have occurred 0x80090318

Hi I am having this problem for weeks:
iTunes cannot connect to i Tunes store. An unknow error have occurred 0x80090318
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
iTunes 11.4.0.18
QuickTime 7.7.5
FairPlay 2.6.16
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
Apple Mobile Device 8.0.0.23
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
The current local date and time is 2014-10-13 22:33:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
No external plug-ins installed.
iPodService 11.4.0.18 (x64) is currently running.
iTunesHelper 11.4.0.18 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
DHCP Enabled: Yes
Lease Obtained: Mon Oct 13 22:25:56 2014
Lease Expires: Tue Oct 14 02:25:56 2014
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2014-07-01 22:20:33.

Have you tried the troubleshooting for that error code on this page : Apple software on Windows: May see performance issues and blank iTunes Store ?
This also appears to have worked for a number of people : error iTunes Store : 0x80090318 (the solution).

HT201210 I am trying to restore my ipod 4th 5.1.1, but when I try itune " the ipod couldnt be restored, an unknow error occured (3194). what should i do??

I am Trying to restore my ipod 4th gen 5.1.1 but when i try to restore it in itunes "The ipod couldnt be restored, an unknow error occured (3194). what should i do?

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything. Now I have an iphone and I want to sync calendars but not contacts or email. Any direction you could give would help! thx

Anyone...anyone? Bueller...Bueller?

Does the SGE2010 support 10gb Mini GBIC?

Hello,
I have one 48 port SGE2010 and one 24 port SGE2000P at separate sites that are connected with single-mode fiber. I was wondering if the SGE's will support 10gb Mini GBIC transceivers or only 1gb Mini GBIC transceivers? I would like to connect the two switches at 10gb.
Example transceiver:
https://www.cdw.com/shop/products/Proline-Cisco-SFP-10G-LR-Compatible-10GBase-LR-SMF-SFP-mini-GBIC-module/2146046.aspx
Thanks in advance!

Hello,
I have never actually seen a 2Gb connector, but even if you found one the SGE switches are only able to do 1Gb on it's ports. You may be able to configure a link aggregation between the two switches, but that really only gives you more bandwidth when there are lots of different hosts communicating over the link. I go over why this is in this post, starting with the second paragraph of my reply.
If you really would like a faster link the next step up is 10Gb. The SG500 switches can support a 5Gb link between them (although this still uses either the 10Gb stacking cable, or a 10Gb mini-GBIC), and the SG500X supports 10Gb fiber connections.
We also have recently come out with the SG500XG, which can do 10Gb on ethernet ports when you use Cat6A cable. I understand you may not be looking to upgrade just yet, so Link Aggregation is probably your best option with the switches you have now, but take a look at the post I linked first to see if it will really give you the improvement you are looking for.
Thank you for choosing Cisco,
Christopher Ebert - Advanced Network Support Engineer
Cisco Small Business Support Center
*please rate helpful posts*

Is there a GBIC to sfc patch cable?

I believe the currently installed fiber is GBIC, but the switch converter is mini-GBIC. Is there a way to get these to work together?
Thanks.

I'm not really sure what you mean, GBIC is a type of interface convertor and usually has SC Fibre connectors, the mini-GBIC you are referring to may be an SFP which is a smaller type of interface convertor and usually has LC Fibre connectors.
GBICs and SFPs will work together as long as they are the same type ie Single Mode or Multi Mode and you also need to make sure the TX and RX Optical Power levels are within the specified limits at both ends of the link.
On some switches the command "show inventory" may show the type of interface convertor installed.
SITE-A-CAT#show inventory
NAME: "SITE-A-CAT", DESCR: "Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports and 2 GBIC (Gigabit Interface Converter) slots"
PID: WS-C2950G-24-EI   , VID: L0 , SN: FCZ1041Y0KJ
NAME: "GigabitEthernet0/1", DESCR: "longwave fiber gigabit ethernet port adapter"
PID: GBIC_LX           , VID: 30 30 30 30, SN: AGS094801V1
Or try the command "show interfaces gi/x/x/x capabilities" (where gix/x/x) is the interface number.
PE-CAT-A#show interfaces gi1/1/1 capabilities
GigabitEthernet1/1/1
Model:                 ME-C3750-24TE
Type:                  1000BaseLX SFP
Speed:                 1000
Duplex:                full
Trunk encap. type:     802.1Q
Trunk mode:            on,off,desirable,nonegotiate
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off,on,desired),tx-(none)
Fast Start:            yes
QoS scheduling:        rx-(not configurable on per port basis),tx-(4q2t)
CoS rewrite:           yes
ToS rewrite:           yes
UDLD:                  yes
Inline power:          no
SPAN:                  source/destination
PortSecure:            yes
Dot1x:                 yes
Hope this helps

HT201210 iphone could not restore. an unknow error occurred(2005) in the procces of updating my iphone 3g

i was trying to update my iphone 3g and it display iphone could not restore. an unknow error occurred(2005) in the procces of updating the ios. please i need your help to restore back my iphone 3g. please what can i do to restore it back?

Try to restore the device in DFU mode: http://theiphonewiki.com/wiki/DFU_Mode

I sync the IPhone on windows 8 as always, suddenly ITunes message !Tunes could not connect to this IPhone . An unknow error occurred (OxE8000084).

I sync the IPhone on windows 8 as always, suddenly ITunes message
!Tunes could not connect to this IPhone . An unknow error occurred (OxE8000084).

Read here:
http://support.apple.com/kb/TS3221

Iphone 3G recovery mode; the iPhone cannot be recovered: unknow error 1604

Hi
I was recovering my iPhone 3G at iTunes after creating a back-up.
When I wanted to recover (and update to OS 3.1.3. from 3.1.2) iTunes is turning the iPhone into recovery mode, but after a few minutes the phone is keeping getting the message
the iPhone cannot be recovered: unknow error 1604
There is no futher information about this error. So now I have a non working iPhone
Please help me, what to do
Thanx
Jos from the Netherlands

Lots of Google results for 'iphone error 1604'... http://www.google.com/search?aq=f&sourceid=chrome&ie=UTF-8&q=iphoneerror1604
Here's an Apple doc that may help... http://support.apple.com/kb/ts1275

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

LMS 4.0 Inventory Collection GBICs and serial nos.

Hi All,
I have larger numbers of WS-C3560X-24/24P/48 Cisco switches with1000BaseSX SFP GIBCs installed per switch in my network and they are all added to my DCR just fine. However, when i generate an inventory hadrware report GBICs and GBICs serial number is not showing up. Is there any special settings i need to make?
Let me know if you need additional information to help to identify the problem, i'll provide it.
Any help will be very much appreciated. Thank you in advance!
Rob

GBICs and SFPs and such will show up in a detailed device report.
If you create a custom report ("Reports, Report Designer, Syslog and Inventory, Create"), you can extract that information into a useful form for your purposes. You will want to use the report designer and pull out "port serial number" plus something like device name. I just did this myself and verified it will pull the SFP serial number from a device. They key fields are "Inventory Group: port" and "Attribute: port serial number"
Here is a screen shot from the report I created showing the serial number you are asking about:

Unknow gbic

Similar Messages

Maybe you are looking for