Unknown and unexpected error (5002) when using the basket

Hi all
I 've encountered the following error message when I try to buy music by the basket
" Unknown error (5002)" and I can't see my basket ! Does anybody know what I have to do in order to buy and download music!
Thanks !

Hi,
Sorry to hear your basket is the same as my basket and from what I read upon these sacred forums, many otheres are experiencing this trouble as well. If it's a user problem, it appeared just after one of the last two updates. Depricated? Unknown. User problem? Not likely. I wish I had an answer for you. Hopefully someone will have it soon. Mine has been down for 3 weeks now. I even tried uninstalling and trying a previous version. No such luck.
Cheers

Similar Messages

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!

were you able to get help on this? I need help on error 5002 as well. thank you

We randomly get the "specified Group is in use" error message when using the DIO Buffered Handshake In VI. How do we get rid of this?

We're using the DIO Buffered handshake in VI (PCI 6503 Board) to read TTL pulses from a wavemeter. Sometimes we are able to collect data, but sometimes we get this error message: "specified Group is in use". No matter how long we wait between taking data, we sometimes (yet not always) get this message. We have one group of 2 ports that we're reading. Is there a way we can get rid of this problem?

Hi,
Are you running any example program or your own?
1. This problem happens when you abnormally terminate the program, such as, by clicking on the abort button.
Say first time you run the programd and it runs fine and then abort the program. In that case, the DIO group is not cleared and hence the subsequent runs give the error that you said.
In such case I would suggest you to open the Device Reset.vi which is under Functions Pallete>>Data Acquisition>>Calibration and Configuration>>Device Reset.vi.
On the front panel of the Device Reset.vi, enter the device number of your card and run the Device Reset.vi. If you get an error on the front panel, then run again so the error goes away. Now run you DIO program and it should run fine.
The botto
mline is, dont abort the program. If it has no functionality incorporated to stop it depending on some condition, then incorporate it.
Please do let me know if my suggestion helped.
Sincerely,
Sastry V.
Applications Engineer
National Instruments

Error message when using the DVD drive

I have a Satellite P200D and every time I put a disk of any kind into the disk drive I get an NO-DISK error message when I eject the disk. I always make sure that I shut all programs relating to use of the disk before trying to take the disk out. This is a new problem as I have used the laptop for a couple of months without any issues at all. The text of the error message is below. Any pointers would be appreciated. I can live with it but it would be nice not to have to.
Exception Processing Message 0xc0000013 Parameters 0x764C023C 0x8E4A1B6C 0x764C023C 0x764C023C

Ok, if you try to eject the disk using the eject button on the side of the laptop, why not try ejecting through software in windows.
To do this right click on the dvd drive in my computer and then click on "eject". This might tell windows that its ok to let the drive go now.
Another solution would be to save all important data to another drive, then return the laptop to "out of box condition" using the recovery disc. I'd say problem will go away.
However, if problems persist, please see your place of purchase for a check up.
Good luck.

Why do I receive Error -23088 when using the Eval Formula Node.vi (LV6.1)?

Hi,
I want to evaluate formulas like x=v>20; with that vi. When typing the
same formula into an normal Formula Node I get the correct answer. When
changing the formula into x=v+20; the eval Formula node.vi works fine.
But whenever I try to resolve a boolean function like that mentioned
above, I receive that f****n Error! Why this? What can I do? Is the Eval
... .vi less powerfull than the normal node?
Thanks for your help,
Daniel

Joel A wrote:
> I think the boolean (binary) ops are the only difference between the two nodes.  I pulled this from the help:
> Formula Node and Expression Node Functions
>
> The following list contains the names of the Formula Node and Expression Node functions, and their descriptions. Except for the binary functions, you also can use these functions with <a href="gmath.chm::/Parser_VIs.html" target="_blank">Formula VIs</a>. All function names must be lowercase. You also can use <a href="mk:@MSITStore:C:\Program%20Files\National%20Instruments\LabVIEW%208.0\help\lvhowto.chm::/Precedence_of_Operators_in.html" target="_blank">operators</a> and the pi constant in Formula and Expression Nodes.
> Start at the help above, and see if you can find any helpful information.
>  
>  
> J
Thanks for help,
I solved the problem by using the "Parse Arithmetic Expression.llb" from
examples. You can modify it and add the operators you need..

Error message when using the Text Tool

I have just uninstalled and reinstalled my Copy of Photoshop CS6
I now find I cannot use the TEXT TOOL - I get the following error message:- Adobe Photoshop CS6 could not complete your request because something prevented the text engine from being initialized.

I did find that suggestion and I have tried it a couple of times. Now I am going to re-start my PC just incase that clears it
.........................and it's worked!
Maybe I didn't do the previous re-set properly but it's now O.K. thanks.
Happy Christmas

Excel opens and does not close when using the OI classes for some users...

Hello Experts,
I am using the OI classes(i_oi_container_control, i_oi_error, i_oi_document_proxy, i_oi_spreadsheet) to transfer Excel data to my itab. The problem we are encountering is that for some users the excel automatically opens and does not close. But in my case it is not opening so it is fine in my case. In my code I am already using the 'CLOSE_DOCUMENT' and 'RELEASE_DOCUMENT'.

Viraylab,
Check by any case you set the parameter register_on_close_event of the method init_control? Dont set the parameter as it will look for the corressponding custom code in your program. Also try with the method release_all_documents.
Regards,
Kiran Bobbala

Error occurs when using the LeCroy Waverunner driver.

Hi
I downloaded a Lecroy Waverunner driver in Instrument Driver Network and installed it. However, when I used it in block diagram. An error message "lcltxxxx_32.DLL is not a 32-bit DLL" appeared. What's the matter with that?
Bill.

Hello Bill,
It sounds like you have the wrong IVI engine installed. The current LeCroy Waverunner software on the website requires the 1.83 IVI Engine and NI-VISA 2.5 or later. If you have old versions of the IVI engine and/or NI-VISA, remember to delete the old versions before reinstalling.
Regards,
Ray Kong

Error 404 when using the app

For my app that is built using JDeveloper 11.1.1.3.0, I have a .jspx which has 3 page fragments (.jsff) built into it. I see the following error message whenever any buttons, including the out of the box, Search button, are clicked:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I see this error message only when I deploy the EAR to DEV and TEST environments and I don't see this error on my local env, where I am deploying the EAR to Integrated WLS.
WebLogic server logs don't give me any more info than:
"Multiple forms detected on viewId: /SpecPages/CSTHistory.jspx. Rich client currently has some limitations in dealing with multiple forms."
I didn't modify the page authorization (jazn-data.xml) for this .JSPX or the three .JSFF's I use so I am not sure why this error is popping up.

I quickly added one jspx to test if it would help. However, the URL continues to display w/ the .jspx extension. Here is the updated xml file:
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<view id="csthistory">
<page>/SpecPages/CSTHistory.jspx</page>
</view>
<managed-bean>
<managed-bean-name>login</managed-bean-name>
<managed-bean-class>com.qualcomm.backing.LoginHandler</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
</adfc-config>
I have a total of 6 jspx and most of them have JSFF's and these jspx's are set up as navigation panes.

Errors & warnings when using the Admin Server Console - Help Needed

hi,
i just installed weblogic 12c and created a new domain which contains an adminServer and managedServer under
one cluster.
after finishing the installation, i started the Admin Server and afterwards started the admin server console.
and i got the next warning and errors.
the warning look like this:
<20:00:35 IST 23/03/2012> <Warning> <Munger> <BEA-2156203> <A version attribute
was not found in element "web-app" in the deployment descriptor C:\Oracle\Middle
ware\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_internal\cons
oleapp\jxhze9\console-ext\sipserver-console-ext\WEB-INF\web.xml. A version attri
bute is required, but this version of the WebLogic Server will assume that the l
atest version is used. Future versions of WebLogic Server will reject descriptor
s that do not specify the Java EE version. To eliminate this warning, add an app
ropriate "version=" to element "web-app" in the deployment descriptor.>
the errors look like this:
<20:01:51 IST 23/03/2012> <Error> <netuix> <BEA-423158> <No content found at con
tentUri = /PortalConfig/security/providers/AuthenticatorConfigCommon.portlet.>
what is the problem? anyone knows?

If you want to have an weblogic environment with one domain having server spread across different physical machines , then you will have to perform the installations of the weblogic server separately on all the machines . Also make sure that the version of the Weblogic server you are installing is same across the machines and the directory structure is also exactly same.
In short you will have to perform the below steps :
1 : install the weblogic server on all the machines with exactly same version and same dir structure .
2 : Create domain on MachineA providing all the details of the Managed Server and different machine hostnames.
3 : Start the Admin Server on machineA and then shut down it.
4 : execute the WLST pack command on MachineA creating a domain template JAR file.
5 : copy the create jar file on all the Machines ( B , C , D ) you have to distribute your domain.
6 : Execute the WLST unpack command on all the machines ( B , C , D ) .
7 : Execute the WLST nmEnroll () command on all the machines ( B, C , D ).
8 : Start the Managed Servers on all the machines ( B , C , D )

HP MediaSmart server control center quit unexpectedly error message when installing the server console

Need help installing the software. Keep getting the error message above

Need help installing the software. Keep getting the error message above

Error message when using search

why do i keep getting an error message when using the "search" tabe in iTunes. This happend whe i upgraded t the latest version of itunes.

Well, I believe JHeadstart does not really have this functionality.
One way is use a Query Operator 'startsWith', but then you always query like LIKE '<entered search value>%'
This is probably not what you want...
But you could hack it into advancedSearch in YourApplicationModuleImpl
try {
if (viewCriterium.getQueryValue() != null) { //This is where exception JHS-00116 is raised...
value = viewCriterium.getQueryValue().toString();
} else {
value = null;
catch (NumberFormatException ex) {
//insert check for wildcard
value = viewCriterium.getValue().toString();
if (value.indexOf('%')>=0) {
sLog.debug("Ja, een wildcard!!!");
operator = "LIKE";
} else {//original exceptionhandling code here...
...and a bit later, add test for "LIKE":
if (viewCriterium.isDate() || viewCriterium.isString() || "LIKE".equals(operator)) {
value = "'" + value + "'";
very nasty code, and does not raise an exception for searches like '%xxx'
Good luck,
HJH
Edited by: HJHorst on Mar 5, 2009 12:03 AM

My Application gets Error 37 when using Serial Port VIs.

My Application works fine developed with LV 6.1. Then I updated to LV 7.1 and now the Executable of my application gets error 37 when using the old serial port functions. The "serpdrv" file is located in the application directory and is from 02/2002. The application runs well in the development environment after I placed the "serpdrv" file in the LabView directory. I tried to put a line with "serialDevices=..." in the .ini-file of my application but this did not cause an improvement. I also tried to rebuild the EXE with this line in the "labview.ini" file but nothing changes.
Does anybody have another idea ?
Many thanks for help
Thomas

>Did you actually replace the old serial functions that come with 7.1 with the functions from 6.1?
Yes. E.g. "open serial driver.vi" uses "open device" with "serpdrv" as device string.
I had the same problem running my application as VI´s. After the copy of serpdrv into the LV 7.1 directory everything works fine.
I don´t understand why the application running as a .exe doesn´t find the serpdrv when it is in the same directory....
Nevertheless many thanks for your answer
Thomas

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Unknown and unexpected error (5002) when using the basket

Similar Messages

Maybe you are looking for