Unknown command beginning "shutdown i
Hi dbaguru,
Can any one provide me solution. i unable to shutdown my dabase it showing below message when i make my database into downmode.
SQL*Plus: Release 8.0.6.0.0 - Production on Tue Aug 19 14:19:58 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: sys as sysdba
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
unknown SET option beginning "SQLPLUSCOM..."
SQL> shutdown immediate
unknown command beginning "shutdown i..." - rest of line ignored.
It looks like you are using Sqlplus from Oracle 8 to shutdown an Oracle 9 database.
I think you should logout and check your environment to make sure you are using the correct sqlplus to connect to the correct database.
Similar Messages
-
Sql select with concate of columns SP2-0734: unknown command beginning
I am running a ksh script that does some dumpster diving and pull records out.
It is basically reading a file does a select and at the end, you will see $i.
AND ORD_ORDER.ADV_ORDER_TEXT_FIELD_568='$';
I can run the script manually. (without the while loop)
But, when I run it thru the script I get a whack of errors.
SP2-0734: unknown command beginning "FROM ADVXR..." - rest of line ignored.
SP2-0734: unknown command beginning "ADVXRT_HDB..." - rest of line ignored.
SP2-0734: unknown command beginning "ADVXRT_HDB..." - rest of line ignored.
SP2-0734: unknown command beginning "ADVXRT_HDB..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
What I need it to do is pull the selected records out and place in a file.
Script
cat $TICKETS_MISMATCH |while read i
do
$SQLPLUS -silent "advxrt_hdb/$LOGONID@hdb" <<EOF >$TICKETS_MISMATCH_FULL
set feedback off
set verify off
set echo off
set heading off
set pagesize 7010
SELECT ORD_ORDER.ADV_ORDER_TEXT_FIELD_568
|| ','
|| ORD_ORDER.ORDER_NUM
|| ','
|| ORD_ORDER.ADV_ORDER_SUMMARY_FIELD_012
|| ','
|| LAB_USER.NAME
|| ','
|| LAB_USER.LOGON_ID
|| ','
|| LAB_USER.ADV_EXTENDED_USER_FIELD_001
|| ','
|| TO_CHAR(MOBILECOMP1_SR.ADV_COMPLETION_TIME_FIELD_001, 'HH24:MI:SS')
|| ','
|| TO_CHAR(MOBILECOMP1_SR.ADV_COMPLETION_DATE_FIELD_001, 'DD-MON-YYYY')
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_NOTES_FIELD_001
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_003
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_013
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_014
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_023
|| ','
|| ORD_JOB_CODE.NAME
|| ','
|| ROUND(ASN_ASSIGNMENT.TOTAL_TIME_EN_ROUTE / 60,0)
|| ','
|| ROUND(ASN_ASSIGNMENT.TOTAL_TIME_ON_SITE / 60,0)
FROM ADVXRT_HDB.LAB_USER,
ADVXRT_HDB.SR_REPORT,
ADVXRT_HDB.ASN_ASSIGNMENT,
ADVXRT_HDB.ORD_ORDER,
ADVXRT_HDB.MOBILECOMP1_SR,
ADVXRT_HDB.ORD_JOB_CODE
WHERE (ASN_ASSIGNMENT.ASSIGNMENT_ID = SR_REPORT.ASSIGNMENT)
AND (ASN_ASSIGNMENT.FOR_ORDER = ORD_ORDER.ORDER_ID)
AND (MOBILECOMP1_SR.MOBILE_COMP1_ID = SR_REPORT.RECORD_NUMBER)
AND (ORD_ORDER.JOB_CODE = ORD_JOB_CODE.JOB_CODE_ID)
AND (SR_REPORT.USER_ID = LAB_USER.USER_ID(+))
AND ORD_ORDER.COMPLETED BETWEEN ((TO_DATE('${date_entered} 00:00:00','YYYY-MM-DD HH24:MI:SS')) - ((SELECT DECODE
(UTC_OFFSET, NULL, 0, UTC_OFFSET) FROM TZ_UTC_TO_LOCAL TZ WHERE (TO_DATE
('${date_entered} 00:00:00','YYYY-MM-DD HH24:MI:SS') BETWEEN TZ.STARTS_UTC AND
TZ.ENDS_UTC)AND TZ.TIME_AUTHORITY = 1000264000000000000000000013))/(24*60*60))
AND
((TO_DATE('${date_entered} 11:59:59','YYYY-MM-DD HH24:MI:SS')) - ((SELECT DECODE
(UTC_OFFSET, NULL, 0, UTC_OFFSET) FROM TZ_UTC_TO_LOCAL TZ WHERE (TO_DATE
('${date_entered} 11:59:59','YYYY-MM-DD HH24:MI:SS') BETWEEN TZ.STARTS_UTC AND
TZ.ENDS_UTC)AND TZ.TIME_AUTHORITY = 1000264000000000000000000013))/(24*60*60))
AND ORD_ORDER.ADV_ORDER_TEXT_FIELD_568='${i}';
exit;
EOF
doneSQL> DEFINE sqlplusrelease
DEFINE SQLPLUSRELEASE = "1002000200" (CHAR)
cat $TICKETS_MISMATCH |while read i
do
$SQLPLUS -silent "advxrt_hdb/$LOGONID@hdb" <<EOF >>$TICKETS_MISMATCH_FULL
set feedback off
set verify off
set echo off
set heading off
set pagesize 7010
SET SQLBLANKLINES ON
SELECT ORD_ORDER.ADV_ORDER_TEXT_FIELD_568
|| ','
|| ORD_ORDER.ORDER_NUM
|| ','
|| ORD_ORDER.ADV_ORDER_SUMMARY_FIELD_012
|| ','
|| LAB_USER.NAME
|| ','
|| LAB_USER.LOGON_ID
|| ','
|| LAB_USER.ADV_EXTENDED_USER_FIELD_001
|| ','
|| TO_CHAR(MOBILECOMP1_SR.ADV_COMPLETION_TIME_FIELD_001, 'HH24:MI:SS')
|| ','
|| TO_CHAR(MOBILECOMP1_SR.ADV_COMPLETION_DATE_FIELD_001, 'DD-MON-YYYY')
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_NOTES_FIELD_001
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_003
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_013
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_014
|| ','
|| MOBILECOMP1_SR.ADV_COMPLETION_TEXT_FIELD_023
|| ','
|| ORD_JOB_CODE.NAME
|| ','
|| ROUND(ASN_ASSIGNMENT.TOTAL_TIME_EN_ROUTE / 60,0)
|| ','
|| ROUND(ASN_ASSIGNMENT.TOTAL_TIME_ON_SITE / 60,0)
FROM ADVXRT_HDB.LAB_USER,
ADVXRT_HDB.SR_REPORT,
ADVXRT_HDB.ASN_ASSIGNMENT,
ADVXRT_HDB.ORD_ORDER,
ADVXRT_HDB.MOBILECOMP1_SR,
ADVXRT_HDB.ORD_JOB_CODE
WHERE (ASN_ASSIGNMENT.ASSIGNMENT_ID = SR_REPORT.ASSIGNMENT)
AND (ASN_ASSIGNMENT.FOR_ORDER = ORD_ORDER.ORDER_ID)
AND (MOBILECOMP1_SR.MOBILE_COMP1_ID = SR_REPORT.RECORD_NUMBER)
AND (ORD_ORDER.JOB_CODE = ORD_JOB_CODE.JOB_CODE_ID)
AND (SR_REPORT.USER_ID = LAB_USER.USER_ID(+))
AND ORD_ORDER.COMPLETED BETWEEN ((TO_DATE('${date_entered} 00:00:00','YYYY-MM-DD HH24:MI:SS')) - ((SELECT DECODE
(UTC_OFFSET, NULL, 0, UTC_OFFSET) FROM TZ_UTC_TO_LOCAL TZ WHERE (TO_DATE
('${date_entered} 00:00:00','YYYY-MM-DD HH24:MI:SS') BETWEEN TZ.STARTS_UTC AND
TZ.ENDS_UTC)AND TZ.TIME_AUTHORITY = 1000264000000000000000000013))/(24*60*60))
AND
((TO_DATE('${date_entered} 11:59:59','YYYY-MM-DD HH24:MI:SS')) - ((SELECT DECODE
(UTC_OFFSET, NULL, 0, UTC_OFFSET) FROM TZ_UTC_TO_LOCAL TZ WHERE (TO_DATE
('${date_entered} 11:59:59','YYYY-MM-DD HH24:MI:SS') BETWEEN TZ.STARTS_UTC AND
TZ.ENDS_UTC)AND TZ.TIME_AUTHORITY = 1000264000000000000000000013))/(24*60*60))
AND ORD_ORDER.ADV_ORDER_TEXT_FIELD_568='${i}';
exit
EOF
done -
Unknown command beginning "recover da..." - rest of line ignored
Hi.
I have one corrupted datafile (status column from v$datafile have value 'RECOVER' for it and I get ORA-01113, ORA-01110 when I try to get it online). It seems I need manually recover datafile via 'RECOVER DATAFILE' command. However when I issue it in SQL*Plus I get: 'unknown command beginning "recover da..." - rest of line ignored.'.
I have Oracle 8.0.5 Database.
ThxIs this production server If yes 'DON'T touch and get away from that key board' in tom words.
and take a oracle support if you are not familer with recover command.
In case its your testing enviornment the you can take the corrupt datafile offline restore the new from latest backup and for this you should have all archive log from the date of last backup.
after restoring datafile use recover command.
http://www.iselfschooling.com/mc4articles/mc4recovery.htm
go through following link for step by step recovery. -
Unknown command beginning "NODUPLICATES..."
Hello,
When I execute this sql script, I get the error below. I'm on Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit. It runs and gives formatted output. Do you have any suggestions as to why I get this error?
set pagesize 100
set linesize 100
column c0 format a10 heading 'Owner Name'
column c1 format a20 heading 'Table Name'
column c2 format a20 heading 'Index Name'
column c3 format a20 heading 'Column Name'
column c4 format a10 heading 'Uniqueness'
break on c0 skip1 NODUPLICATES on c1 skip1 NODUPLICATES on c2 skip1
NODUPLICATES on c4 NODUPLICATES
select ...
unknown command beginning "NODUPLICAT..." - rest of line ignored.
Edited by: Cerito on May 31, 2013 8:26 AMHi,
Cerito wrote:
Hello,
When I execute this sql script, I get the error below. I'm on Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit. It runs and gives formatted output. Do you have any suggestions as to why I get this error?
set pagesize 100
set linesize 100
column c0 format a10 heading 'Owner Name'
column c1 format a20 heading 'Table Name'
column c2 format a20 heading 'Index Name'
column c3 format a20 heading 'Column Name'
column c4 format a10 heading 'Uniqueness'
break on c0 skip1 NODUPLICATES on c1 skip1 NODUPLICATES on c2 skip1It looks like the line below is supposed to be a continuation of the line above.
NODUPLICATES on c4 NODUPLICATESIf you can't put the entire command on one line, then put a single hyphen ( - ) at the end of the first line, to tell SQL*Plus that the command is continued on the line below, like this:
break on c0 skip1 NODUPLICATES on c1 skip1 NODUPLICATES on c2 skip1 -
NODUPLICATES on c4 NODUPLICATES
select ...
unknown command beginning "NODUPLICAT..." - rest of line ignored.
Edited by: Cerito on May 31, 2013 8:26 AMIn SQL (and also in SQL*Plus) commands are delimited by ; and or /, and a newline is just whitespace. SQL*Plus is a different langauge, with different syntax. In SQL*Plus, newline marks the end of a command, unless you put a hyphen at the end of the line before it.
Edited by: Frank Kulash on May 31, 2013 11:34 AM
Edited by: Frank Kulash on May 31, 2013 11:52 AM
By the way, NODUPLICATES is the default. You might consider just saying
break on c0 skip1 on c1 skip1 on c2 skip1 on c4so the entire BREAK command fits easily onto 1 line. On the other hand, it's often nice to make the command very clear, even if that means making it longer. In that case, you might want something like:
BREAK ON c0 SKIP 1 NODUPLICATES -
ON c1 SKIP 1 NODUPLICATES -
ON c2 SKIP 1 NODUPLICATES -
ON c4 NODUPLICATES -
"SP2-0734: unknown command..." error while importing a dump file
hello,
i want to import a dump file into my database named orcl, and i come accross the same error after executing the import command. my import command is:
SQL> imp mvdemo/mvdemo file=mvdemo.dmp full=y ignore=y
i use oracle 10g enterprise edition.
i created the user mvdemo/mvdemo.
the error i see in my screen is:
SP2-0734: unknown command beginning "imp mvde..." - rest of line ignored.
for a long period of time, i havent used oracle dbms. before, i remember that i used enterprise manager in import/export processes. however, i am not able to find the enterprise manager in 10g options now. do i have to install the enterprise manager seperately in oracle 10g enterprise edition? may this problem be relational with this matter?
if someone could answer, i would be greatful.
best regardsImport is run from the command prompt, not the SQL prompt.
-
Strange SP2-0042: unknown command in sqlplus
Hello everyone,i was attemptting to execute a sql statement from an external file. But i got "SP2-0042: unknown command "ï»? - rest of line ignored.". It's works with ANSI but can not based on UTF8 encoding.My file only contains as following :
spo db_changesfff.log
SPO OFF
Anyone has ideas?thanks in advance!!We had this problem as well and we noticed that the script file that contained the UTF-8 had two FF FE magic numbers at the beginning of the file. View your file in HEX mode of your text editor and verify that a single FF FE is at the beginning of the file. We created our UTF-8 file using Notepad. This seems to put two FF FE's in the file header. When we removed one set of FF FE, everything worked just fine.
-
EXEC DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE -- Unknown Command ??
Hi,
I am trying to create queues as explained here
http://www.akadia.com/services/ora_advanced_queueing.html
but I am running into this problem.
Any ideas how to solve it?
Thanks!!
EXEC DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE(
privilege => 'ENQUEUE_ANY',
grantee => 'my_aq_user_role',
admin_option => FALSE
Error starting at line 1 in command:
EXEC DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE(
Error report:
ORA-06550: rad 1, kolumn 41:
PLS-00103: Påträffade symbolen ";" då en av följande förväntades:
+ case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
table continue avg count current exists max min prior sql
stddev sum variance execute multiset the both leading
trailing forall merge year month day hour minute second
timezone_hour timezone_minute timezone_region timezone_abbr
time timestamp interval date
<a string literal with character set specification>
<a nu
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
Error starting at line 2 in command:
privilege => 'ENQUEUE_ANY',
Error report:
Unknown Command
Error starting at line 3 in command:
grantee => 'my_aq_user_role',
Error report:
Unknown Command
Error starting at line 4 in command:
admin_option => FALSE
Error report:
Unknown Command
Error starting at line 5 in command:
Error report:
Unknown CommandLook at this example.
SQL> ed
Wrote file afiedt.buf
1 begin
2 DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE(
3 privilege => 'ENQUEUE_ANY',
4 grantee => 'HR',
5 admin_option => FALSE
6 );
7* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> EXEC DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE('ENQUEUE_ANY','HR',FALSE);
PL/SQL procedure successfully completed.
SQL> exec DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE(privilege => 'ENQUEUE_ANY',grantee => 'HR',admin_option => FALSE);
PL/SQL procedure successfully completed.
SQL> EXEC DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE(
BEGIN DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE(; END;
ERROR at line 1:
ORA-06550: line 1, column 41:
PLS-00103: Encountered the symbol ";" when expecting one of the following:The problem is when you copied the example, you copied with "enter" character. -
Error: Could not complete your request because an unknown command was encountered.
I've been working on a file in FreeHand 11 for a few months
now, and for some reason after saving and closing the file about a
week ago, I can no longer open it - on either of my computers (both
PCs, one running XP, one running Vista). When I attempt to do so, I
am presented with the following error message:
Could not complete your request because an unknown command
was encountered.
Is there any possible way to fix this?Haha. I know. I was stupid... The last backup of the file is
four months old. Unfortunately I've done quite a lot of work on it
since then...
One interesting thing though, is that I can still see the
thumbnail picture in Windows Explorer. Also, I'm able to open the
file with Fireworks, but none of the hidden layers (most of my
work) are there.
I just tried to open it again on my desktop. Same error
message (but in German)...:
"Ihre Anforderung konnte nicht ausgeführt werden. Ein
unbekannter Fehler ist aufgetreten." :S -
hi my problem is that i am creating a maze game. the maze is a 2d array of integers. and fed in threw a reader and loaded.
static void play(){
try {
//creates a buffered reader
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
//boolean varible is set to true when the program is running until exit is typed
boolean running = true;
while (running){
//a new String varible which is used for input
String line = in.readLine();
//when the game is being played a line string says you typed. + line
//the +line is what the user typed
System.out.println("You typed "+line);
//if the user types south call the south method;
if(line.startsWith("south")){
south();
//if the user types east call the east method
else if(line.startsWith("east")){
east();
//if the user types west call the west method
else if(line.startsWith("west")){
west();
//if the user types north then call the north method
//this is not case sensitive
else if(line.equalsIgnoreCase("north")){
north();
// check if they have reached the goal
if(currentX == goalX && currentY == goalY)
System.out.println("You have reached the goal!");
//print out the maze after each turn(this was only used for testing purposes)
print();
//if the user types exit then change the value of running to false and exit the java console
//it also calls the equalsIgnoreCase this method will allow entry in any case
if (line.equalsIgnoreCase("exit")){
running = false;
// else
// System.out.print( "Unknown command: " + line );
the problem is that if the user types in an invalid command i want to display this error message.
when i run the program however i get the error every time even though the move happens the error message is still displayed. i only want the error message to display when an invalid command is typed
i am a beginner so please use basic language.
thanks jonUse the code formatting tags when you post code.
hi my problem is that i am creating a maze gameTrue, if you weren't creating a game, you'd probably have no problem.
threw a readerWhere did you throw it?
i am a beginner so please use basic language. Put your "unknown command output" and exit check blocks directly after the check for "north" -
Mysql Unknown Command Error:
Hi, I have a New website jokes.randhawaworld.com but i am
hacing severe mysql errors and that are related to:
Error Executing Database Query.
Communication link failure: Unknown command
I ceated a Support Ticket and They said they enabled the
Robust Exception handling to dig around. I checked and my queries
were causing trouble, i changed the values of some queries to
hardcore it they worked but when they were made dynamic it
generated error. Slowly all my queries were getting errors. May be
my 1 query could be wrong not all.
Can anyone please tell what is going wrong with Me.
vist at: jokes.randhawaworld.com to see its contents
Also I made the website using AJAX but no sign of Ajax is
shown on the webpage. i am in a shared host with hostingtoaz
Plz guide me
Thanksnightwolf666 wrote:
> Hi, I have a New website jokes.randhawaworld.com but i
am hacing severe mysql
> errors and that are related to:
>
> Error Executing Database Query.
> Communication link failure: Unknown command
Using cfgoogle returns
http://gm22.net/2006/09/22/communication-link-failure-unknown-command/
Mack -
Unknown Command when opening a file
When I try to open a file created in freehand it tells me
"could not complete your request because an unknown command was
encountered." I get this message on a lot of files. However, when I
go to "my computer" and open the folder containing the file you can
see the thumbnail and the file is there. I need help.> When I try to open a file created in freehand it tells
me "could not complete
> your request because an unknown command was
encountered." I get this message
> on a lot of files. However, when I go to "my computer"
and open the folder
> containing the file you can see the thumbnail and the
file is there. I need
> help.
In most cases, it seems, it is about fonts. FreeHand can't
find the font used in the document and stumbles in the replace
function (dialog). Also FreeHand saves information about default
printer (?!?!) and may get confused there too.
If you know the fonts used, install, if not reduce the number
of installed fonts to minimum. Also try to import into new document
like Judy suggested.
If you have (access to) Illustrator CS3 try to open the files
with it. If it works you'll know at least the file is ok.
Thumbnail is probably the last survivor when the rest of the
file gets corrupted.
Jukka -
hello all..
while trying opening a file created in MAC, in my p.c i got a
unknown command error.
the strange thing is that in the preview i can see the file
but i can't open it.
i send this fle to my friend and he opend it in his p.c with
no problem
what can i do ????????
please help me...OK,
There are two places to check. Actually two type of places to check.
1) Go to the iChat > Preferences > Alerts section.
Check every potential setting in the top drop down with whether it has a AppleScript setting checked in the box below.
2) Click once on every Buddy (in turn) then hit the Apple key and I together to get the Info card up.
Go to the Alerts tab.
Repeat 1) (This is because you can set the Alerts Individually as well as Globally in 1) )
Once you have found and removed any setting to Use one of the AppleScripts you can then use the iChat > Preferences > Alerts section to open the Scripts Folder and open the Scripts with AppleScript Editor (Just Double Click them) and check them for changes (there is an Auto Accept that is phrased to cope with all types of chats and Screen Sharing invites there is also an Auto decline)
If this fails to work you will have to delete com.apple.ichat.plist
This will mean making your Settings again in all the Preferences as you Lose Alerts settings, Font choice, Font Colour, Bubble colour, whether the Menu Bar icon is showing, Whether Transcripts are Saved and so on. You also lose any Personal or Individually set Alerts.
Outside of the Preferences you will also lose any Saved Status Messages you have Created.
You will not lose your Buddy List or your Buddy pic or those of your Buddies.
(You may lose Animation if set it.)
My guess would be that the choice for Message Sent has an Applescript check against it and that the AppleScript it is connected to is nothing to do with Sending.
8:27 PM Monday; December 1, 2008 -
SP2-0042: unknown command "UNION" - rest of line ignored.
I used sql script for creating DB structure on Oracle 8 with no errors.
I got "SP2-0042: unknown command "UNION" - rest of line ignored" error on Oracle 9i.
Do you anybody tell me whats wrong ?Sorry, I had technical problems to access this formu to response.
My script (part):
CREATE VIEW ARVALUE
AS
SELECT IDVALUE FROM DBVALUE;
CREATE VIEW AWVALUE
AS
SELECT DBVALUE.IDVALUE FROM DBVALUE, AWOBJECT
WHERE DBVALUE.IDOBJECT = AWOBJECT.IDOBJECT;
CREATE VIEW BSOBJECTUSAGE
AS
SELECT IDOBJECT_CHILD AS IDOBJECT, IDOBJECT_PARENT AS REFERRER
FROM OBJECTREF
WHERE OBJECTREF.ACTIVE <> 0
UNION
SELECT IDOBJECT_TEMPLATE AS IDOBJECT, IDOBJECT AS REFERRER
FROM DBVALUE
WHERE (DBVALUE.ACTIVE <> 0) AND (STORAGETYPE = 2)
UNION
SELECT IDOBJECT_DIAGEXT AS IDOBJECT, IDOBJECT AS REFERRER
FROM DBVALUE
WHERE (DBVALUE.ACTIVE <> 0) AND (STORAGETYPE = 5);
Log file (part)
View created.
View created.
SP2-0042: unknown command "UNION" - rest of line ignored.
SP2-0042: unknown command "UNION" - rest of line ignored.
no rows selected
View created.
if I understand, better
is:
CREATE VIEW BSOBJECTUSAGE
AS
SELECT IDOBJECT_CHILD AS IDOBJECT, IDOBJECT_PARENT AS REFERRER
FROM OBJECTREF
WHERE OBJECTREF.ACTIVE <> 0
UNION SELECT IDOBJECT_TEMPLATE AS IDOBJECT, IDOBJECT AS REFERRER
FROM DBVALUE
WHERE (DBVALUE.ACTIVE <> 0) AND (STORAGETYPE = 2)
UNION SELECT IDOBJECT_DIAGEXT AS IDOBJECT, IDOBJECT AS REFERRER
FROM DBVALUE
WHERE (DBVALUE.ACTIVE <> 0) AND (STORAGETYPE = 5); -
hei!
I have a simple SessionBean, deployed to remote OC4J.(the bean is tested locally and is fine)
using Jdeveloper, I create a client to call my sessionBean methods.
If I create the client to run agains the embedded oc4j, it works fine.
If I create a client that runs agains the remote oc4j, I get this error:
com.evermind.server.rmi.RMIConnectionException: Unknown command: 0
and a lot of
java.lang.Object com.evermind.server.rmi.RemoteInvocationHandler.invoke(java.lang.Object, java.lang.reflect.Method, java.lang.Object[])
appreciate your help
Regards
RTRussel ,
Have you started remote OC4J Server? Also can you able to browse
JNDI tree of Remote OC4J Server from JDeveloper?
Also provide following information in order to understand your problem fully
1. Which OC4J version you are using?
2. Platform in which you are testing your application?
3. Provide full stack trace of error that you are getting
Cheers
--Venky -
An unknown command was uncountered
Suddenly I opened the Freehand 11.0.2 and I couldn’t
open the Object, Align and Transform window. A box saying "Could
not complete your request because an unknown command was
encountered" appeared. I tried to reinstall the freehand and the
problem´s continued. I tried to update my freehand and it's
continued yet. I open the same freehand in other computer [PC] and
it’s everything all right. What can I do to solve
that?Sounds like a corrupt preferences file to me.
Remove the preferences file from its original location. (No
idea where that might be on a pc, I'm on a mac.) and store it
elsewhere (so you can put it back if that's not the problem.
FH will automatically create a fresh prfs file on the next
launch.
HTH
Willem van den Goorbergh
Maybe you are looking for
-
How do I open Freehand files created in OS 9 in OS 10?
I had a G3 with OS 9. I created all my artwork in Adobe FreeHand 10. I now have a G4 with OS 10 and I have no idea how to open my files. Can anyone help me please?
-
Best way to integrate system Music & Movies folders with iTunes' default folder structure?
I understand that OSX has system folders that can't be moved (Music, Movies, Documents, etc.). These folders are the only ones that get their specialized icons in the sidebar. I like those icons as they make choosing the right folder easier (even t
-
How to add a URL link to a WAD template
Hi, the requirement is to have a kind of button in a WAD template that opens a document in a new browser window. (The document actually contains an extensive help for the application. It shall be stored in the portal CM and we have the URL for that)
-
i have done all updates still cant load up defender please help
-
BICS - Passing variables to a BEx Query
Hi Experts, We are currently developing dasboards in Dashboard Design (XCelsius) using BICS. Since we want to leverage the 'create once, reuse many times' principle, we would like to populate our (data intensive) dashboard using 8 connections that fi