Unknown devices appearing in my access list

I have a WPN824 wireless router and in the last two weeks, I've found three devices in the access list that I didn't put there. I first found the three devices last week and deleted them from the list. Tonight, I found them again. All three devices have different MAC address, but use the same device name: "NMADDR." My access list has 12 devices that I added for all the devices I've want to connect
The router is connected to a broadband cable (ComCast) modem.
I manage the router and am the only one with the password. The passsword is a strong 10 character password.
I use Cisco's Network Magic Pro v5.5.9 to manage my home network.
I was wondering if anyone else has run across something like this and can explain how these devices can be "automagically" added to what I thought was a secure router?
Thanks.

May I suggest that this could be either a PDA device, an Apple iTouch or perhaps a WiFi mobile - I had a similiar issue a little time back and this was the ghost in the system.

Similar Messages

"Unknown Device" appears when ipod is "connected"

So I just bought an ipod yesterday. I took it out of the box and i followed the instructions and hooked it into my usb port on my computer not keyboard. The ipod did not connect and my computer did not even register that anything is hooked in that port. I'm finally able to get it to register about once every 20 times, and when it does it says unknown device and that there are no drivers for it. A message also appears saying a device has malfunctioned and cannot be recognized. The ipod is not charged as it doesnt connect to my pc so i cant even turn it on to follow the 5 r's. What should i do?

Grey text when you look at the content and lock symbol at the bottom of the screen simply shows that your iPod is set to update automatically. If you want to access your iPod directly, play it through your iTunes, connect it to a second computer etc. you just need to change the update method to "Manually manage music and videos" in the iPod preferences. For more detail see this tutorial: Managing content manually on iPod
One thing to be aware of with manually updating is that the iPod also has to be manually ejected before the "Do Not Disconnect" message will go away. Safely disconnect iPod

Unknown Devices appearing in Application Sharing

I have noticed a number of unknown devices are listed in the application sharing section of Hub Manager. Does this pose a security threat and is there any way I can prevent external access of this kind? There doesn't seem to be any way of removing them from the list.
Thanks.

djp9999 wrote:
but the devices in question are BOB and Garys Ipod, neither of which have anything to do with me.
Is does sound like your hubs wireless encryption could of been compromised
Or a family member has given out the wireless key - maybe for a friend to use the broadband connection....
I'd change the wireless encryption key with immediate effect....
(note - The hub will not show what wireless device that is connected to the Fon/Openzone SSID, but some hubs do allow the user to check to see if the Fon/Openzone SSID is being used)
-+-No longer a forum member-+-

Equium L10: Windows Vista Beta2 - unknown device

Hi
I have a Toshiba Equium L10 with Windows XP loaded as default but I installed VISTA Beta2 "public release" on it and given that it's only a 1.5GHz Celeron CPU with 512MB RAM, it ran extremely well but, I have one problem which I am hoping that I can get help with from the users in this forum and especially those who have the same/similar Equium model as I have?
Ok, after installing VISTA I checked in Device Manager and noticed "Unknown Device". After checking out the info given in it's properties, I have detailed it below:
Location: Microsoft ACPI Compliant Embedded Controller
Value: ACPI\ACPI 0001 * ACPI0002
When I re-installed XP again, I went to Device Manager/Batteries/Microsoft SMART Battery, the entry for Microsoft SMART Battery Subsystem has "ACPI\ACPI0002\6&28CA2229&0".
Notice the "ACPI0002" info given for the 'unknown device' in VISTA is the same info given for the "Microsoft SMART Battery Subsystem" in Windows XP. So I am left wondering if the unkown device under VISTA is the Microsoft SMART Battery Subsystem and if so, why did VISTA not install the driver for it?
Can anyone help with find a driver for the "unknown device" in VISTA?
Regards
Brave

Hi
The unknown device appears because the driver is missing.
Unfortunately, at this time you will not find any Toshiba supported drivers for the Windows Beta2. This is a beta version and not official on the market.
I think if this OS will be official supported so you will also find the needed drivers.

LMS 4.2 Compliance check extended access-list

Hi,
I would like to check of our router has one specific line in an extended access-list. I have tried to use the 'baseline compliance' to get the output, but can't get the syntax right.
I would like to avoid checking on the line number in the access-list, because this is not the same on all the routers.
I have made a new compliance check like this:
'submode': ip access-list extended 'acl-name'
+deny tcp any any eq smtp
But that is not working, Can some one show me the 'right path'?
Thanks
Soren

Doesnt have any issues on my Lab 4.2.4. following is the Job Work order :
Name:
Archive Mgmt Job Work Order
Summary:
General Info
JobId: 2704
Owner: admin
Description: test_acl
Schedule Type: Immediate
Job Type: Compliance Check
Baseline Template Name: test_acl
Attachment Option: Disabled
Report Type: NAJob Policies
----------------------------------------------------------------------------------------------E-mail Notification: Not Applicable
Job Based Password: DisabledDevice Details
Device
Commands
Sup_2T_6500
ip access-list standard 21
permit host 10.20.30.40
permit host 40.30.20.10
deny any log
10.104.149.180
ip access-list standard 21
permit host 10.20.30.40
permit host 40.30.20.10
deny any log
Check your template, or export it and share, i will try it on my LMS server. also, check the same complaince job on other devices if you have such issues.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Satellite U200-124 - Unknown devices with Windows XP SP2

I downloaded Toshiba U200 drivers for Windows XP from this site, install Windows, install all drivers.
Well.
But i have 2 unrecognized devices in device manager.
1. NIC 1394. Device Code V1394\NIC1394\92423A3900
2. PCI Device. Device Code PCI\VEN_104C&DEV_803C&SUSBSYS_00011179&REV_00\4&6B 16D5B&0&5BF0
Modem & FireWire are not working.
What can I do?

As Ivan said the drivers are not installed correctly and therefore the unknown devices appear in the device manager.
The installation instruction shows the right installation order. This order is necessary and important to get all devices working!!!
Please visit the Toshiba European driver page, choose the right series and download and install the right and compatible drivers like mentioned in the txt. file

New Quad G5 - 'unknown device' on Firewire Bus

Even when nothing is connected to the Firewire ports, and after rebooting, System Profiler shows an 'unknown device' on the Firewire Bus. The Firewire bus works correctly, I've used it with hard drives and a Focusrite Saffire audio interface. The unknown device is always in the list.
Other Quad users seeing the same thing?

same thing for me, I think it's not something wrong.
Like there is hub integrated firwire hub...

Unknown Device in Windows XP

Hi Community,
on my new ThinkStation S10 is WinXP installed. Everything, except one, works fine.
Opening the System -> Hardware -> Device Manager an unknown Device appears:
Intel(R) ICH9R LPC Interface Controller 2916
The ChipSet Drivers from the Support CD are installed, but the unkown Device doesn't disappear.
Can anybody help me with this problem?
Hajo

radarsync ssolution did not work for me.
I solved problem by loading the Broadcom TPM Driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-66306

IPod appearing in Device Manager as unknown device

Hi, I'm currently using an iPod Nano 4th Gen. and it is appearing in Device Manager as an unknown device. I found this out after the error message "USB device not recognised" or something, and followed instructions. I'm currently clueless on what to do. My OS is Windows 8. When I go into properties of the unknown device (iPod) the device status is: Windows has stopped this device because it has reported problems. (Code 43). And in details, I get: USB\DEVICE_DESCRIPTOR_FAILURE
If you need any more information to help me, please do not hesitate to request it. I just really would like this issue to be solved. Thank you in advance.

Thank you for the update, passionflower
I think next would be a good idea to shutdown the computer, and disconnect everything from it. Let it sit for a minute or two, then plug it all back up and turn the computer on, then try again.
Next I would start troubleshooting the USB ports on the computer. I would start with this troubleshooting.
On the Start menu, click Control Panel.
Double-click the System icon.
Click the Hardware tab.
Click Device Manager.
Scroll down the list of devices to the Universal Serial Bus controllers
Click the plus icon next to the Universal Serial Bus controllers.
Double-click one of the indented USB Root Hub entries.
Click the Power Management tab.
Deselect the "Allow the computer to turn off this device to save power" option.
Click the OK button at the bottom of the window.
Restart the computer.
From: iPod not recognized when connected to Windows laptop over USB
http://support.apple.com/kb/TS1401
And then this troubleshooting
Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
Restart your computer and device. To restart your device:
Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
From: iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
If you have another computer you can also test the iPod Nano there to help isolate whether the issue is with the iPod or the computer.
And just in case the issue is still not resolved, I want to thank you for using the Apple Support Community. Due to the nature of your issue you may find more information by using another one of Apple's support resources - https://expresslane.apple.com/GetproductgroupList.action.
All the very best,
Sterling

Hello, I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13..

Hello,
I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
SO PLEAZZZZZ HELP!!!!!

An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

TS3195 since installing ios7 on my ipad I can no longer import photos to my Mac using Image Capture or even Preview. The device appears in the device list, but no photos appear. Anyone have a solution for this? Is it another glitch in ios7?

Hi - I just dowloaded io7 to to my mini ipad and now cannot upload the photos on it to my Mac - which I was able to do with the old system, and still can do with my old first generation Ipad. Very annoying. The device appears in the list in Image Capture and Preview, but no photos appear. Is there a way around this? It is the quickest and best way of transferring photos from a mobile device to the computer - but has iOS 7 messed this up???

Hi I have figured it out on my own just today coz what apple suggested didn't help much so I just have to do it by myself.
This is what you need to do:
open your computer and search for autoplay, it will open rightaway and then scroll down look for your device then change "ask everything" to "import photos and videos in windows" connect your ipad again then tthe import box will open.. and your good!
i hope this will help you. Good luck! :-)

Unknown user appears in get info permissions list

unknown user appears in get info permissions list of a lot of folders. I cant remove the user, change the permission level of that user. Is there a way of getting over this problem?
Here is a screenshot of the unknown user...
http://i228.photobucket.com/albums/ee151/cosmac2007/Picture5.png

pzeitler, i tried your fix. it worked but only partly. i had to go to an admin account and do the sudo because my non-admin account that was affected does not allow me to sudo from it. so i do it from admin account and it seems i add my non-admin user to all admin files\folders with full permissions and no admin account user. so i open the home folder in get info, add admin user and set permission, apply recursively to all inside it. How ever, i couldnt remove the non-admin user from admin user folder permissions.
now i go to non-admin user account and find that unknown grp is gone for all except three folders (public/sites/downloads). i also checked a third, non-admin user and it seems unaffected by all the operations that i have performed. but it has the unknown grp in it.
I guess i have to wait for apple to fix it rather than mess up the system myself.

I am trying to set up two-factor authentication but none of my devices appear listed.

I am trying to set up two-factor authentication but none of my devices appear listed. I am only given an option to add an SMS-enabled device. When I do this, I receive an SMS with a code, but have no way to continue in the browser. I have enabled find my iPhone on at least one device, and can see all my devices in the find-my-iPhone app. Am I missing something?

As a check, this page walks you through the process:
http://technofyi.com/2013/03/21/how-to-enable-apples-two-step-verification-featu re/
His step 6 shows the 'Step 1 of 4' page where you should click 'Add an SMS-capable phone number'.
His step 7 shows the 'Add a phone number' window where you can enter the phone number and click 'Next'. The phone should then receive the code by SMS.
His step 8 shows the 'Verify Device' window which should appear automatically in which you can enter the code.
Are you not seeing the window in step 8? if this is not popping up automatically then something is going wrong: you could try clearing your browser's cache and trying again. If it still won't work you may have to contact Support: Go to https://getsupport.apple.com ; click 'See all products and services', then ' 'iTunes', and then 'iTunes Store', then 'Account Management' then 'Apple ID account security' - this seems to be the nearest relevant option.

My iOS 6.1.4 is updated. i have other devices connected to wifi hotspot of my iphone5. Though my other devices appeared to be connected and shows an excellent cignal strength, i cannot access internet. hope this will be fixed.

my iOS 6.1.4 is updated. i have other devices connected to wifi hotspot of my iphone5. Though my other devices appeared to be connected and shows an excellent cignal strength, i cannot access internet. hope this will be fixed.

I hope so too. So what have you actually done to fix your issue?

Unknown devices appearing in my access list

Similar Messages

Maybe you are looking for