Unknown devices - New installation Windows 7

Hi guys,
I have an SL510 thinkpad and I have just installed windows 7 professional 64x. I noticed my wifi not working and in Device Manager there are a number of 'Unknown Devices' I have 3 'Base System Device' alerts, a 'Network Controller' alert and an Unknown Device....
The Hardware Ids are as follows:
PCI\VEN_197&DEV_2384
PCI\VEN_197&DEV_2382
PCI\VEN_197&DEV_2383
PCI\VEN_8086&DEV_0084
ACDI\IBM0068
I have tried installing several WLAN drivers to try and get my wifi working but no good. Any help would be greatly appreciated...
ndolly2912
Solved!
Go to Solution.

Good day and welcome to the community.
From http://www.pcidatabase.com/index.php
Device Id  Chip Description               Vendor Id  Vendor Name
0x2382     JMB38X SD/MMC Host Controller  0x197B     JMicron Technology Corp.
0x2383     JMB38X MS Host Controller      0x197B     JMicron Technology Corp.
0x2384     JMB38X xD Host Controller      0x197B     JMicron Technology Corp.
0x0084     Intel Wireless Link WiFi 1000  0x8086     Intel Corporation
First three = Card reader
- http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-sl-series-laptops/thinkpad-sl...
Fourth = WiFi
- http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-sl-series-laptops/thinkpad-sl...
From http://support.lenovo.com/us/en/documents/ht004905
ACPI\IBM0068 is probably the power management driver
- http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-sl-series-laptops/thinkpad-sl...
For reference, the SL510 main support pages:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-sl-series-laptops/thinkpad-sl...
Does this help?
Regards.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

  • EVERY time I start Thunderbird, a new installation window opens

    Every time I open Thunderbird a new installation window (file extraction) opens as well. Whether I proceed through to finish or cancel, the result is the same. Thunderbird appears to be working normally in every other way, but this window opens each and every time I open a new session - please help!!!

    Hey There Christ1 -
    The target ended up being right, so I disabled addons and renabled them one by one hoping I would find the problem. As it turned out, when I finally got down to ReminderFox (one of my faves :-( that one triggered this reaction every time, so unfortunately until the developer comes up with a fix for that, I've just kept it disabled... Thanks again for your help - and anyone else who may be having this problem, try disabling this add on for now (bummer)!
    Thanks again everyone!
    tls

  • ACPI\VPC2004 Unknown Device - Lenovo g560 windows 7 pro. x64 installed

    I just bought Lenovo g560. And installed windows 7 pro. x64 and installed drivers from driver cd shipped with laptop (windows 7 drivers). After installed all drivers still I had one device unknown ; device id = Acpi\Vpc2004. In the Windows 7 solution center, there was message about download energycut and install. I downloaded and install energycut. But nothing changed and power management option program not working too.
    I googled so much and couldn't find any solution.
    +++
    Actually there very interesting situation, there is any driver or support about lenovo g560 on lenovo global support site. And auto detect is not working too.
    Did I made mistake to buy lenovo instead of thinkpad???
    If somebody have solution about this acpi\vpn2004 driver please help.
    Because like that when sleep or lid laptop not waking up.
    After hibernate and start computer, having blue screen and system halted message. until start without resume system.
    Solved!
    Go to Solution.

    I googled this: "ACPI\VPC2004 Unknown Device"
    Third hit was THIS at another Lenovo forum.
    Is this your solution?

  • Unknown device HP Envy windows 8

    After upgrading an ENVY 4-1043CL to windows 8 (including upgrading bios), an unknown device is detected in control panel, and the system can't find a driver for it after numerous scans. How do i determine what the device is so that i can download the appropraite driver? I have also tried to use "auto detect" from the HP web site but that process crashes IE.

    After further research I found it, it's the HP wireless button.

  • HP 350 G1 ACPI\HPQ6007 *HPQ6007 Unknown Device Driver for Windows 7 Ultimate x64

    Hi,
    I have recently purchased HP 350 G1 latop and there is a missing driver in device manager under Windows 7 Ultimate x64 that I cannot find out what driver it is, could you please help identify the hardware and provide me link to the driver?
    ACPI\HPQ6007
    *HPQ6007
    Thanks.
    James
    This question was solved.
    View Solution.

    Hi,
    Download and install HP 3D DriveGuard from the following link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709431&swItemId=ob_124661_1&swEnvOid=405...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • W530 - unknown device after installing windows 8.1

    Hi,
    W530
    Product: 244752U
    BIOS: G5ET95WW (2.55 )
    Windows 8.1 - Installed from scratch. 
    I was able to install and configure all drivers but one. I found a tread that suggested installing Lenovo Setting Dependency Package 2.0.0.13 to fix it on a different lenovo model. I tried it without any success. 
    The driver id of unknown driver is "{48126E0D-4BDD-4D26-8A24-569C7AB522D6}\SettingsDriver"
    Google did not help.
    Any help is appreciated. 
    Eduardo
    Solved!
    Go to Solution.

    yeah, ive noticed that happens to me sometimes. I keep getting a system/root/0006 device. goes away after uninstall and scan.
    W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
    Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

  • No more download of Creative Cloud after new installation Windows 7.

    I had several blue screens due to a lack of the battery. Therefore I reinstalled Windows 7 on my harddisk. I wanted to reinstall Creative Cloud but the code I have bought was an activation code and this code has been used. So no more download possible of CC. What is wise to do next?

    D manyman your membership is tied to your Adobe ID.  For information on how to install the Adobe Creative applications included with your membership please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • "Unknown Device" shown when I connect my iPhone 4 to the laptop

    Hi all,
    My iPhone 4 cannot synchronize to my Windows 7. Only "Unknown Device" shown on the "Device Manager" when I connect them via the cable.
    The laptop is new and installed Windows 7 Home Premium Edition 64-bit. BIOS is the latest one.
    iOS is 4.0 and iTunes is 10.0.1 for 64-bits Windows 7
    I do not think the problem is due to the iTunes. Only "Unknown Device" shown on Window 7. I think the iPhone cannot be recognized by the laptop.I tried to connect the phone to a Window XP. It is fine. Likewise, a usb drive is recognize by the Windows 7 laptop.
    I have tried
    1. update the BIOs
    2. Re-install the itunes
    3. download the usbaapl.sys
    Can anyone help as it bother me for a week.
    Thanks very much
    Ben

    The first thing I would try is to use a different USB port
    next I would have my MacbookAir looked at

  • Unknown device in device manager after win8.1 upgrade W540

    I'm using the W540 with an ultradock and external monitors. After upgrading my W540 to win8.1 64 bit, device manager is showing an unknown device. I'm not quite sure what it is, but almost everything seems to be working fine and Lenovo solution center isn't finding any driver updates.
    I did notice that the solution center hardware scan did not test the video card memory and listed that test as N/A. Video and monitors seem to be working fine though and both nvidia and intel graphics show up in device manager.
    Device manager lists the device in question as follows:
    Device instance path: ROOT\SYSTEM\0001
    Hardware Ids: root\iwdbus
    Device stack: \Driver\PnPManager
    Solved!
    Go to Solution.

    This seems to fix the problem.. any idea why?
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Lapt​ops/W530-unknown-device-after-installing-windows-8​...
    (In device manager - Right click, uninstall, scan for hardware changes)

  • Satellite A660-10W - After Windows 7 installation some unknown devices

    So I have the Satellite A660-10W, and I reinstalled the Windows 7 it came with Windows 7 ultimate 64bit. First thing is when I use fn+F6/F7 (other combinations work) for brightness levels it doesn`t work, brightness doesn`t change. And the other thing is that there seem to be some unknown devices.
    Here is everything hope someone can think of what could it be, thanks in advance. :)
    Link: [http://store.picbg.net/pubpic/B4/3E/3ca598fbde5fb43e.png]

    OK you and my friend are right, because I installed the video card drivers from nvidia`s website, not from toshiba, now brightness works :D
    And I reinstalled Windows because one thing there were no partitions only one lonely drive and I wanted 30-40gigs for windows and the rest for stuff, not when I decide do reinstall lets say a year later with work and media on it to lose everything. I didn`t do any back ups, even all the shop assistant talked about when I bought it was to buy some dvd`s and backup, but I said I never did that before so why would I need it now, anyway now everything works perfectly, iI`m prepared for the next time :D , thanks for the help. :)

  • Unknown device - ipod nano fine - problem with windows xp and usb root hub

    Greetings all. I've seen this question come up over and over again and have been working on it following previous posts and posts on microsoft and hp sites for a couple of days now.
    First off - the ipod nano is fine. Works on my son's computer well.
    When I plug it into my 6 months new HP Pavilion laptop it says: 'found new hardware' and goes through the process of installing it, says it's been installed, but then shows 'unknown device'. In Device Manager it tells me there are no drivers installed, but when I try to follow the other instructions on this forum to update the drive to USB mass storage device (usbstor.inf), it tells me the best driver is installed and won't do it.
    Many seem to have this problem with devices other than the iPod on Windows service pack 2 so I went to the Microsoft forums and they seem just as puzzled. I've updated all my Windows & HP software to the latest possible versions. The problem is definitely in the USB. Once, when I uninstalled the USB device and then rebooted the computer with my iPod still plugged into the port, it found my iPod, correctly identified it, and for a blissful moment I thought everything was fine! Then it reinstalled the USB drivers and made a comment to the effect that I should move the iPod to a USB 2.0 port for more effective operation and the iPod disappeared again.
    I have 3 USB ports on my laptop, all are USB 2.0 and all 3 have the same problem.
    I've tried all the stuff people have already said on here...does anyone have any NEW ideas? I'm hesitant to take it in for service because it seems to be a software problem that should be fixable.
    Thanks in advance for your help and sorry about the long post.

    This isn't a solution, but it's something I just tried and it may provide someone additional clues about's going on. I too think this is some sort of USB problem.
    I have 6 USB ports. Two of them are USB 2.0. Since I applied the 03-23 update my computer hasn't recognized my nano at all. I would connect my nano and I couldn't get it to show up in My Computer, in iTunes, or on the far right side of the Start taskbar.
    I just tried plugging my nano into the first USB port of my USB 2.0 pair and left the second 2.0 port empty. I then rebooted with the nano attached. Viola - I get a "Found New Hardware Apple iPod USB Device" message. My nano is now flashing "Do Not Disconnect." A small removeable storage icon with green arrow now shows on the far right side of the Start taskbar. If I click on it (like you're going to eject it) the note displayed says "Safely remove USB Mass Storage Device - Drive (F:)".
    If I go into My Computer, "Removeable Disk (F:)" now shows there. However, if I try to follow Trevor's instructions in another post to "go into My Computer with iPod connected, right click it, wait till the right click menu comes up (could take a few minutes); click Format, . . ." I'm stuck. I do the right click, watch the hour glass and wait for the Format menu to come up but it never does. Eventually the hour glass just goes away. No message, no Format menu. The waiting hour glass just goes away.
    My computer isn't as new as yours, but like you I am completely current on maintenance.
    I'm going to keep trying . . . If anyone has any ideas, please let me know.
    Dell Dimension 8100 Pentium 4   Windows XP   Service Pack 2 Phoenix ROM Bios PLUS Version 1.10 A09

  • I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed.

    I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!

    Hello MArk.wijesinghe,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best of luck,
    Mario

  • How to fix Unknown device in windows 7

    Hi
    I have just install windws 7 pro on HP Envy dv6-7200SA Notebook PC
    When I open Unknown device Properties, I see following in details
    For
    Other devices
           - Unknown device
                     ACPI\HPQ0004
                    *HPQ0004
    How do I fix it.
    Please can you help me.
    thanks
    Ish
    This question was solved.
    View Solution.

    Hi,
    The hardware id is for HP 3D DriveGuard - the driver you require is on the following link,
    http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64144.exe
    When the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Several Unknown Devices after Windows 7 Home Premium Reinstall

    After losing all my data trying to encrypt my hard drive I reinstalled windows from my hard drive using HP's settings in the boot menu and got some weird results. One is that my C drive now only only has 65 gb of space, so I created a new partition with the remaining 215 gb on my hard drive. Additionally, my screen resolution has only 2 options, leaving my desktop looking strange. The worst of these problems is that several of my hardware items are showing up as unknown in addition to my wireless internet not working. Would it be better for me to reinstall again or try and find the drivers?
    Here are the Unknown devices on my computer listed under other devices with the hardware IDs:
    Base System Device:
    PCI\VEN_197B&DEV_2392&SUBSYS_167C103C&REV_30
    PCI\VEN_197B&DEV_2392&SUBSYS_167C103C
    PCI\VEN_197B&DEV_2392&CC_088000
    PCI\VEN_197B&DEV_2392&CC_0880
    Base System Device:
    PCI\VEN_197B&DEV_2393&SUBSYS_167C103C&REV_30
    PCI\VEN_197B&DEV_2393&SUBSYS_167C103C
    PCI\VEN_197B&DEV_2393&CC_088000
    PCI\VEN_197B&DEV_2393&CC_0880
    Network Controller:
    PCI\VEN_168C&DEV_002B&SUBSYS_1461103C&REV_01
    PCI\VEN_168C&DEV_002B&SUBSYS_1461103C
    PCI\VEN_168C&DEV_002B&CC_028000
    PCI\VEN_168C&DEV_002B&CC_0280
    PCI Simple Communications Controller:
    PCI\VEN_8086&DEV_1C3A&SUBSYS_167C103C&REV_04
    PCI\VEN_8086&DEV_1C3A&SUBSYS_167C103C
    PCI\VEN_8086&DEV_1C3A&CC_078000
    PCI\VEN_8086&DEV_1C3A&CC_0780
    Unknown Device:
    ACPI\HPQ0004
    *HPQ0004
    Unknown Device:
    USB\VID_138A&PID_003C&REV_0086
    USB\VID_138A&PID_003C

    Hi:
    Below are the links to the drivers you need...
    Base System Device x 2:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5060881&swItemId=ob_116003_1&swEnvOid=405​...
    Network Controller:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5060881&swItemId=ob_108905_1&swEnvOid=405​...
    PCI Simple Communications Controller:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5060881&swItemId=ob_102185_1&swEnvOid=405​...
    Unknown Device # 1:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5060881&swItemId=ob_125640_1&swEnvOid=405​...
    Unknown Device # 2:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5060881&swItemId=ob_112146_1&swEnvOid=405​...

  • HP Pavilion TS 14: Unknown Device (Windows 8.1)

    Just wanted to share my experience after reformatting my brand new HP Pavilion TS 14.
    - it came with Windows 8, but do not like all the bloat that comes with OEM installed OSes.
    - backed everything up, and reformatted.
    Now.. i was able to find most of the drivers on HP's website for the specific model.
    - except for 1.
    Unknown Device
    ACPI\VEN_ASD&DEV_0001
    ACPI\ASD0001
    *ASD0001
    i actually found a post on here and the expert said it was related to Graphics.
    - but i installed all of AMD drivers & Software.
    - i even updated via Windows Update.
    Googling was  not fruitful, as this specific model is either too new or not popular.
    But eventually did find it.
    Device type: System devices
    Manufacturer: AMD (ATI)
    Provider: Advanced Mirco Devices, Inc
    Version: 1.1.0.0017
    Date: 2013-02-07
    Operation Systems: Windows 8, Windows 8 (64bit)
    File size: 57.5 KB
    Download: http://www.magicdriver.com/driver92740-ver_1.1.0.0​017.html
    Note: it says Windows 8.. but it's compatible with Windows 8.1 also.
    My Specs:
    HP Pavilion TouchSmart 14
    Windows 8.1 x64
    AMD Catalyst 13.12 (latest WHQL)
    I am NOT an HP employee.

    Hi, This Solved the same problems with my HP 15-d074nr.
    I had to download the file, but it was in .rar- extension so i had to rename to .rar and unrar in a folder a manually instal via device manager.
    BBbut i Worked Great afte hours googling.
    Thanks Bro

Maybe you are looking for

  • ITunes 7.3.1 for Mac OS 10.3.9 problems!

    when I installed iTunes 7.3, I had no issues with it. last night, I was notified that iTunes 7.3.1 was available, and I proceeded to install iTunes and Quicktime. after installing iTunes 7.3.1, it no longer works w/out crashing every time. it goes to

  • How can I save/write data on the hard disc of the Real-Time System?

    I would like to acquire huge size of data via LabView Real-Time System. Since data is so huge, I am now thinking that it might be good idea to write/save data on the hard disc of the Real-Time System first and then transfer the data file to a data pr

  • How connect 2 Mini's to one usb printer

    Can a double usb plug at the printer be used with a separate usb cable from each printer (separate Mini's different systems on opposite sides of the room with printer inbetween) or is it necessary to have a powered usb hub at the printer to do that?

  • Integrating Business Partners and Vendor

    Hi, We are able to get a synchrnization between our HR and Business partner, as and when we are creating a new employee it's creating a corresponding Business partner for that. I also checked that both the employee and Business Partner for that emplo

  • Features missing for working with large spreadsheets

    Have worked with some large spreadsheets, mostly at work, and numbers is missing some key elements. or tell me if I am wrong In no particular order: 1) there is no stop automatic recalculation. With a large spreadsheet you want to turn autocalculate