Unknown displayed

When I received call, the name displayed is 'unknown' and not the caller's name.How to solve this ?

The best thing to do is phone the customer service number of your network service provider and ask them to give you the voicemail box number.
Then input that when it asks you.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Similar Messages

  • Can't Bomgar in since upgrade - Screen sharing ... disabled ..unknown display color depth

    Since upgrading multiple customer systems to Mountain Lion, I am no longer able to use Screen Sharing in Bomgar. The following message appears:  Screen Sharing has been disabled by the customer client. [Uknown display color depth: 0]
    The only brief workaround is to tell someone on the other end to manually change the display setting to Scaling instead of Best for built-in-display will allow a one-time access as that setting immediately reverts back to Best for built-in-display.  Dumbing it down might make it persist, but that isnt' feasible. 
    Bomgar support is closed over the weekend.  I contacted Apple, and they said that there is no way to make the setting persist.  That rep also didn't know of any terminal command that could be used to set the Display Resolution to Scaled either.
    If there were a terminal command to set it to Scaled, that would help much because the Command Shell option in Bomgar does work, and I am able to launch a terminal.
    I also tried to see if there were any settings I could manipulate in Screen Sharing in OS X, but there were none.  I am getting the same result with Screen Sharing enabled or not enabled.
    Anyone else experiencing this?

    I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
    and http://wiki.cchtml.com/index.php/Configuring
    and I'm sure you've done
    aticonfig --initial
    I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
    What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver.

  • Unknown display icon

    I checked the boards and I can not find the description of the icon that just came up on my phone. It is a box with six dots in it with two lines above the box. it is right below Tmobile on the left side of my screen. Does anyone know what it is?

    just to be clear the icon I can't figure out is right below the e in Tmobile.
    Thanks
    Attachments:
    screenshot.JPG ‏70 KB

  • Galaxy S6 displays "unknown" from all landline received calls

    New Galaxy s6 purchased a few months ago.  Noticed "unknown" displayed every time I receive a call from a land line.  Worked with local AT&T personnel and an on line technician.  They said it's a "known issue", but is it a potientially correctable issue?  Could not fix.  5.02 upgrade came out today.  Still the same problem.   I need caller ID to work on all incoming calls.  Need help.

    Hi there! @BryCart Thanks for posting your concerns. I’m sorry to hear you are having issues with the caller ID.
    So I can further assist you, please private message me by clicking here and provide your name and a good contact number.
    Thanks!
    Charise
     

  • Can not mirror display, option is available

    I have a Mac mini with OS X Server that I access over my network using screen sharing. There is no monitor connected to it. However, I see the option to do AirPlay minor mirroring.
    I got an AppleTV and connected it to a TV I use in my office. If I screen share the server, I can now do a Connect via AirPlay to the AppleTV device. I do so and the screen goes black indicating it is connected and the AirPlay icon turns blue. However, the Mac mini's desktop does not appear. Screen stays black. If I look under the AirPlay, there are two options, "Mirror Unknown Display" and "Extend Desktop"
    Extend Desktop is checked and Mirror Unknown Display is black and available. But if I select it, it does not work. The checkmark never jumps to Mirror Unknown Display and stays on Extend Display. I can not get the Mac mini's desktop to appear via Airplay.
    Is this possible to do so I can remotely use the AppleTV via airplay without a physical monitor being attached to the Mac mini? I can do so using screen share and it works fine. Any thoughts?
    Thanks.

    99% sure you can't mirror an absent monitor to the appletv

  • My external 27" AOC display only runs with 1080p

    My external 27" AOC display only runs with 1080p, even though my 27" iMac is capable of 2560x1440 via the attached mini-DisplayPort to DisplayPort cable. How can I get 2560x1440?
    When I run recovery mode, then I get the full 2560x1440 pixels. But when I boot back to 10.9.2, then I can only choose a maximum of 1080p.

    After some hours I found a solution...
    But let me vent a little bit first: My MacBook Air, which I have not yet upgraded to Mavericks, is able to drive the AOC display through DisplayPort at full resolution without a problem.
    Even an older lenovo Notebook with Windows 7 immediatelly used the intended resolution when hooking up the 27" screen. Windows 7 outplaying Mavericks. Oh boy...
    So it seems, that Mavericks introduced some "improvement" that limitd "unknown" displays to 1080p...
    By the way: Clearing PRAM didn't resolve my issue. Neither did holding down the Option key when klicking in the "Scaled" button in the screen resolution area of the system preferences for my screen.
    Anyway: I found out that I can use the plist file for a DELL 27" screen, which google found for me, copy this to /System/Library/Displays/Overrides and then rename the folder and file to match the ID I got back from ioreg.
    Obviously one has to be careful when mixing hardware data in this way. But since a modern screen will simply refuse to be driven with a signal that is out of spec, and since there are not too many different 27" pannels with 2560x1440 out there these days, this felt like a pretty safe thing to do... Your mileage may vary though!
    Unfortunately I don't have a plist editor installed. Thus I can only look at the XML contained in the plist file. With the plist editor from Mac (-> dev tools) it should be possible to edit available resolutions directly (in hex).

  • JSP screens at runtime

    how can i create JSP screens at runtime with just an XML file. this is my project for the college. actually i'm new to jsp and xml. i've got a mail which was sent by the guide to me. if u can understand what they are trying to explain, then plz help me out.
    following is the description of my project as given by my guide.
    Framework is designed to customize user needs in Less programming time and deliver with standard. Any Web based enterprise project requires maintenance of masters. These Operations at times have no business logic. Framework deals with such type of operations creating screens for programmer with just an XML file.
    In Framework request in the form of parameter is sent to Centralized Servlet.
    << Mention entries in web.xml >>
    Servlet reads the value of parameter by name "command". Servlet identifies the command and gets the respective handler and process the request in handler. A Handler is skeletal for servlet, which process the required logic for respective command. Handler helps in forwarding the request to another jsp through Servlet��s Request Dispatcher
    The below points can help u all in devloping the project, I mean the format and tags etc. Use this as the basis and try to search in the net to explore more on XML and develop u'r project.
    The XML file format is as follows:
    1. XML file.
    XML file name should be same as table name.
    For Eg:- If master maintenance screen has to be created for the table coursemaster, then the XML file name should be coursemaster.xml
    2. XML file structure.
    It has starting node by name Root. Which indicates parent node.
    <Root type = "ca" >
    Next specifies the child node under Root, which should be similar to the XML file name.
    <coursemaster type = "cp" >
    To specify the user-friendly module name, which can be displayed in UI screen. You need to use
    <Module name="coursemaster" col="2" />
    Note:
    The value, which you specify under name attribute, should be the value that is present in language properties file, which helps in displaying the heading in respective languages like German, English, Korean etc.
    The attribute col="2" specifies number of columns that the screen should display UI controls. The value specified should be only multiples of 2, i.e. 2,4,6,8 etc.
    All the field names , the order in which they occur, and fields used to list on screen for search page should be specified between <Attribute></Attribute> nodes.
    To specify order of controls that should occur on screen.
    <Order value="vccourseid,vccoursename,vcduration,vccredits,ifee" />
    Note:
    Fieldnames are separated by commas.(These are the fieldnames present in table)
    There should not be space between a comma and fieldname.
    To specify fields for querying.
    <QryResAttrs value="vccompanycode,vcunitcode,vcitemcode,dtvalidfrom,dtvalidupto" />
    Note:
    Here the fields, which are keys, and the fields, which are required through out the module, should be specified. First half should contain keys and then followed by fieldname for the rest of module.
    To specify type of controls for all fields and there property.
    The control properties are specified in <Attr> node with following attributes to specify properties.
    Name �� Value should be similar to fieldname in table and one of the attribute in Order node.
    Label �� Used to represent label on the screen, should be present in language properties file.
    Display �� control type, the following list of controls are present in e-easy framework.
    Design Algorithm:
    Step 1: In ��Framework��, request in the form of parameter is sent to Centralized Servlet.
    Step 2: The Servlet reads the value of parameter by the name ��command��.
    Step3: Servlet identifies the command and gets the respective handler and processes the request in handler.
    Step 4: Handler helps in forwarding the request to another JSP through Servlets Request Dispatcher.
    As soon as Servlet reads the parameter value for ��command��, it accesses AppMap.xml, which stores all information about command values, the respective handler and JSPs. The java class, which reads the contents of AppMap.xml and gets respective information through meaningful methods, is ApplicationMap.class. The structure of AppMap.xml is as follows.
    <command handler= ��handler_name�� jsp= ��JSPname.jsp��>
    The JSPs used in ��The Framework��:
    As the Controls are unknown, Display is unknown; Jsps puts the task to Tag Libraries to create Body for the jsps.
    When a request is forwarded to jsp, the jsp executes the TagLibrary present in it. Tag libraries are present in taglib folder in Web-Inf directory as reports.tld file.
    Class files for Respective Tag libraries and their actions.
    To provide heading to JSP page table.
    TagLibrary name is heading.
    Java file is com.ample.tag.FormHead.java
    <tag>
    <name>heading</name>
    <tagclass>com.ample.tag.FormHead</tagclass>
    <info> Tag for displaying form </info>
    </tag>
    To provide title to JSP page.
    <tag>
    <name>title</name>
    <tagclass>com.ample.tag.FormTitle</tagclass>
    <info> Tag for displaying title </info>
    </tag>
    To generate Body for JSP with Controls depending on particular table in database:
    <tag>
    <name>form</name>
    <tagclass>com.ample.tag.FormTag</tagclass>
    <info> Tag for displaying form </info>
    </tag>
    To generate label for jsp Controls depending on particular table in database:
    <tag>
    <name>label</name>
    <tagclass>com.ample.tag.FormLabel</tagclass>
    <info> Tag for displaying label</info>
    </tag>
    For example displaying ADD page, to add a record to database.
    All Form actions are carried out by tag library ��form�� which calls com.ample.tag.FormTag. Depending on ��command�� from servlet, respective jsps are displayed, which goes to FormTag with body message. In this case, Command=��create�� body message = CRE_USR . FormTag will read this message, and calls respective method to perform the task. The method reads the xml content with all specifications, and generates page writing back to page context of jsp.
    Xml file for coursemaster.xml
    <?xml version="1.0" ?>
    <Root type="ca">
    <coursemaster type="cp">
    <Module name="coursemaster" col="2" />
    <Key name="vccourseid" type="general" />
    <Attribute>
    <Order value="vccourseid,vccoursename,vcduration,vccredits,ifee" />
    <QryResAttrs value="vccourseid,vccoursename,ifee" />
    In the xml file, Query Attributes are
    <QryResAttrs value="vccourseid, vccoursename, ifee" />
    <Attr name="vccourseid" label="courseid" display="text" type="rp" format="String" width="24" table="coursemaster" read="+" write="+" update="-" query="+" jsfunc="isAlphanumeric" errmessage="Should be a String" align="right" />
    <Attr name="vccoursename" label="coursename" display="text" type="rp" format="String" width="24" table="coursemaster" read="+" write="+" update="+" query="+" jsfunc="isAlphanumeric" errmessage="Should be a String" align="center" />
    <Attr name="vcduration" label="duration" display="text" type="rp" format="String" width="24" table="coursemaster" read="+" write="+" update="+" query="+" jsfunc="isAlphanumeric" errmessage="Should be a String" align="center" />
    <Attr name="vccredits" label="credits" display="text" type="p" format="String" width="24" table="coursemaster" read="+" write="+" update="+" query="+" jsfunc="isAlphanumeric" errmessage="Should be a String" align="center" />
    <Attr name="ifee" label="fee" display="text" type="p" format="integer" width="24" table="coursemaster" read="+" write="+" update="+" query="+" align="center" jsfunc="isInteger" errmessage="Should be a Integer" />
    </Attribute>
    </coursemaster>
    </Root>

    Could it be that your import should state the package only, and not the class and therefore your're confusing the compiler?
    Example:
    From:
    <%@ page import="com.aquitecintl.procurement.item.SCItemCopyApp" %>
    <jsp:useBean id="iCpy" type="com.aquitecintl.procurement.item.SCItemCopyApp" scope="session" />
    To:
    <%@ page import="com.aquitecintl.procurement.item.*" %>
    <jsp:useBean id="iCpy" type="com.aquitecintl.procurement.item.SCItemCopyApp" scope="session" />

  • VGAtor Troubleshooting - need some help, guys.

    I have just purchased a VGAtor, and am having technical difficulty getting it to work properly.
    (1) When using "MIrrored Mode", the external display does not expand to the full screen size, and is OFFSET TO THE LEFT. Top and bottom black areas are uniform, and the right black border is much larger than the left black border.
    (2) When using "Extended Desktop Mode", the external display expands to full screen size, but is also OFFSET TO THE LEFT. No black borders top or bottom, but a black border appears on the right while the left side is cut off.
    It seems that in both modes the position is offset to the left. Horizontal, Vertical, and Phase adjustment buttons do not work / do not respond to clicking (settings cannot be changed manually). Control Center does not seem to recognize my display (says "Unknown Display" in Control Center). I've tried downloading the updated Display Specifications and Control Center v1.5 from the website with no effect (product came with v1.3).
    SYSTEM SPECIFICATIONS:
    - 12" Powerbook G4 rev. A (mini-VGA) 867MHz with the following upgrades: 1.12GB DDR SDRAM, 100GB 7200RPM drive, and an 8x dual-layer Superdrive.
    - 17" Apple ADC-connector Flat Panel Display
    - Photo Control's BookEndz docking station (mini-VGA)
    SOFTWARE:
    - Mac OS 10.4.9 (Tiger)
    - VGAtor Control Center 1.5 for Mac OS X
    PLEASE HELP.
    867MHz 12" Powerbook G4 rev A (mini-VGA)   Mac OS X (10.4.8)   100GB, 7200rpm drive/8x DL Superdrive/1.12GB RAM/AX Card

    Dead hard drive, hope you backup your data first.
    Go get it replaced and hope for the best.
    Good luck

  • Itunes artwork display issue and a fix for  'unknown error occured (-50)'

    Too bad they dont have stickies. This would be a great one.
    This is a thorough fix for art work and the -50 error.
    If you see artwork in itunes, first verify that the artwork is in the mp3 tag using a program like "tag and rename" http://www.softdepia.com/tagrename_download1291.html
    If the artwork shows up in tag and rename, then you added it correctly.
    If the artwork isn't displaying on ipod, delete the song and retransfer to the ipod. Next make sure the "view artwork" check box is checked. To do this connect your iPod to iTunes and there will be a checkbox that should be checked to see if you want artwork to show up on your iPod.
    If you get this message -
    The ipod cannot be updated. An unknown error occured (-50).
    And have no artwork at all in you IPOD , dont fret. I am getting there..
    NO you DO NOT NEED to FORMAT YOUR IPOD YET as commonly posted. I have tested and retested the following fix-
    Eject IPOD. Kill ITUNES.
    Backup the following files
    iTunes Library.itl
    iTunes Music Library.xml
    & anything in the Previous Itunes library folder
    and delete them. More info on these at http://docs.info.apple.com/article.html?artnum=93732
    Dont worry, its much easier to recreate the database than to wipe your IPOD.
    Next Start up ITUNES. Plug in IPOD. You now should have a empty database.
    At this time, uncheck copy ARTWORK to IPOD, and when it's done deleting artwork, CHECK Copy ARTWORK to IPOD.
    It now should sucessfully display ARTWORK and not get the -50 error!!
    Now, goto you ITUNES Music folder and drag to the library and it will add you music back in, including your PODCASTS.
    All you need to do is click the RESUBSCRIBE button and you are back in business!
    IF this fails, which i cant DUPLICATE anymore, try this
    http://docs.info.apple.com/article.html?artnum=300248
    Its the DREADED IPOD FORMAT article.
    But you probably wont need it if you follow all these steps.
    Post back if this doesnt work and if it does, give me some credit;)

    Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
    Then open itunes, and it will rebuild the database with the files from the .xml file.
    This saves you from having to rescan the songs..

  • I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

    I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

    Hi Christianjr,
    When you say you reset your network settings, what do you mean, exactly?
    I saw another post on this issue, and the poster indicated that they resolved the problem by turning off their cellular date option and wifi options in Settings, and then turned them back on.
    Also, resetting your phone may help - press the Home and Power buttons at the same time and continue to hold both down until the Silver Apple appears. Once it is back up, click on the update option and see if it fixes the problem.
    If none of those things work, then need to have details on what you did to reset your network settings....
    Cheers,
    GB

  • IPod with display color had an unknown error

    HI guys.
    Like I said.This is my iPod:
    http://img22.imageshack.us/img22/1987/img0085va.jpg
    and then.just this afternoon, it display an unknown error:
    http://img221.imageshack.us/img221/5381/img0084h.jpg
    sorry for low-quality image.it had a picture I think looks like deep freeze standard icon and next to it had a triangle with a ! inside the triangle and below it is a link:
    http://www.apple.com/support/ipod
    how can I fix this. thanks

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • HT1414 while backing up an error occurs displaying that data could not be backed up due to an unknown error(-25).

    while backing up with itunes, it displays that itunes could not back up data as unknown error(-25) occured..please find a fix to this problem..
    also after syncing iphone,time on iphone changes..

    I had the same "Error creating the backup folder" error - many times over.
    I went into the Disk Utility, selected the Backup Disk and ran Verify. It checked out OK. But if not, could have run Repair.
    Then did a complete shutdown and restart of the iMac and then tried "Backup Now" from the Time Machine icon's menu - it worked fine.

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Pdf displayed as unknown filetype after acrobat update

    I have installed 2 updates for Adobe Acrobat 8 Professional today, and after the first one my pdf files have become unknown file types. When I try opening My Computer - Tools - Folder options - File types, locate pdf and try connecting Adobe Acrobat 8 as the default program, nothing happens. That is, I am able to locate acrobat.exe, but when I press 'OK' it doesn't appear in the list of programs as it should.
    If I open Acrobat and from there open a pdf file, it works fine. But it still won't recognize the pdf file type the other way around.
    The updates I installed were 8.1.3 and 8.1.4, although the problem started after the 8.1.3 update. Actually, after restarting the PC and being almost finished with this update, I got an error message saying that the install was unsuccessful, but no error code or any indication as to what had gone wrong. I then opened Acrobat and searched for updates from the Help menu, and I was told that it found the 8.1.4 update. I installed it, this time without any errors, but the problem still persists.
    Any ideas? I have of course restarted my computer.

    Yes, and the same thing happens as if I go to My Computer: I have to browse for the program, as it does not appear in the standard programs list. I browse to Program Files - Adobe - Acrobat 8.0 - Acrobat, and locate the file acrobat.exe. When I press 'OK', Acrobat is still not displayed in the "Programs" list, and nothing happens, the file is still unknown.
    I did some checking in the Event Viewer, and found that right before my first update displayed the failed-error, there were 4 errors from some old Acrobat 6 updates that for some reason was still installed in the system (although Acrobat 6 itself has been removed). So I uninstalled the Acrobat 6 updates, restarted the computer, searched for additional updates for Acrobat 8, found 8.1.5, installed this and restarted the PC once more. No luck this time either..

  • Can anyone tell me how to fix this error I am receiving: LabView: File not found. VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"?

    Can someone help me please? I am receiving this error everytime I attempt to execute my application:
    LabView: File not found. The file might have been moved or deleted, or the file path might be incorrectly formated for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"
    Attachments:
    labview error.jpg ‏176 KB

    We cannot help without additional information:
    Are you running your code
    ...in the development system?
    ...as a standalone application?
    ...deployed to an embedded target?
    If it is a built application, do you explicitly include dynamically called VIs in the build specification?
    Who wrote the program? Do you have access to the code?
    How is this VI called? Is there sufficient error handling?
    Do you manipulate paths as strings or as proper path datatypes with the strip path/build path primitives etc.?
    Is it running on the same OS used to develop it ...
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for