Unknown Error- can't upload files?!

I've been trying to upload a .MOV file into iMovie, but when it gets toward the end of the upload, it says there was an "unknown error" and that it could not be uploaded. The file is 25.1 MB and 1:40. Meanwhile, I had no problem uploading other .MOV files that were filmed the same day on the same camera. I had the problem with three specific files, and I tried emptying the trash bin, re-uploading the files, etc, and nothing worked. Help!

I'm not really sure what camera the file was filmed with because it was actually a friend of mine's who had put her memory card into my digital camera to load her videos onto my laptop. What seemed weird was that we were able to get several clips filmed the same day with the same camera (whichever kind it was lol) and they loaded fine. I never considered that she might have compressed the files, which now that you point that out, is probably what she had done. I'm going to have to check the other files and see how long they were, because I think the one that we had the problem with was the longst clip we had.
Thanks for your help

Similar Messages

  • Error occurred when uploading file (unknown file format) in t.code SFP

    Hi,
    According to SAP Note 1465628 - ESI Limit increased and length of temp. ESI no increased, when we are doing Step 4. PDF form changes (valid for ECC 6.0 and above)....and point (i)...in transaction SFP (From - HR_IN_ESI_005_99), system shows the below message.
    Error occurred when uploading file (unknown file format)
    Message no. FPUIFB068
    Plz guide..

    Hi Anil,
    Refer following links :
    Re: Adobe Form assignment
    Adobe Uploading form error unknown file forma
    Hope this will help.
    Regards,
    Vivek

  • Can't upload files to lighttp server

    Hi *
    I'm starting to have grey hairs abut this...
    My sys is Archlinux (64bit), lighttpd 1.4.29-2, curl 7.22.
    I'm trying to setup hhtp server with capability of upload files.
    After basic setup I use following command to test functionality: 
    curl -T "test_file" http://192.168.1.254/test/
    curl's output is following:
    [root@mythtv ~]# curl -T "test_file" http://192.168.1.254/test/
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
    <head>
    <title>404 - Not Found</title>
    </head>
    <body>
    <h1>404 - Not Found</h1>
    </body>
    </html>
    Dir "test" exists & has 777.
    All dirs upper to "test" also have 777.
    lighttpd access log shows following:
    192.168.1.254 192.168.1.254 - [24/Nov/2011:11:57:14 +0100] "PUT /test/test_file HTTP/1.1" 404 345 "-" "curl/7.22.0 (x86_64-unknown-linux-gnu) libcurl/7.22.0 OpenSSL/1.0.0e zlib/1.2.5 libssh2/1.3.0"
    My lighttpd.conf is following:
    server.modules = (
    "mod_rewrite",
    "mod_access",
    "mod_auth",
    "mod_setenv",
    "mod_fastcgi",
    "mod_cgi",
    "mod_webdav",
    "mod_accesslog" )
    server.document-root = "/var/http/"
    server.errorlog-use-syslog = "enable"
    index-file.names = ( "index.php", "index.html",
    "index.htm", "default.htm" , "mythweb.php" )
    mimetype.assign = (
    ".pdf" => "application/pdf",
    ".sig" => "application/pgp-signature",
    ".spl" => "application/futuresplash",
    ".class" => "application/octet-stream",
    ".ps" => "application/postscript",
    ".torrent" => "application/x-bittorrent",
    ".dvi" => "application/x-dvi",
    ".gz" => "application/x-gzip",
    ".pac" => "application/x-ns-proxy-autoconfig",
    ".swf" => "application/x-shockwave-flash",
    ".tar.gz" => "application/x-tgz",
    ".tgz" => "application/x-tgz",
    ".tar" => "application/x-tar",
    ".zip" => "application/zip",
    ".mp3" => "audio/mpeg",
    ".m3u" => "audio/x-mpegurl",
    ".wma" => "audio/x-ms-wma",
    ".wax" => "audio/x-ms-wax",
    ".ogg" => "application/ogg",
    ".wav" => "audio/x-wav",
    ".gif" => "image/gif",
    ".jar" => "application/x-java-archive",
    ".jpg" => "image/jpeg",
    ".jpeg" => "image/jpeg",
    ".png" => "image/png",
    ".xbm" => "image/x-xbitmap",
    ".xpm" => "image/x-xpixmap",
    ".xwd" => "image/x-xwindowdump",
    ".css" => "text/css",
    ".html" => "text/html",
    ".htm" => "text/html",
    ".js" => "text/javascript",
    ".asc" => "text/plain",
    ".c" => "text/plain",
    ".cpp" => "text/plain",
    ".log" => "text/plain",
    ".conf" => "text/plain",
    ".text" => "text/plain",
    ".txt" => "text/plain",
    ".dtd" => "text/xml",
    ".xml" => "text/xml",
    ".mpeg" => "video/mpeg",
    ".mpg" => "video/mpeg",
    ".mov" => "video/quicktime",
    ".qt" => "video/quicktime",
    ".avi" => "video/x-msvideo",
    ".asf" => "video/x-ms-asf",
    ".asx" => "video/x-ms-asf",
    ".wmv" => "video/x-ms-wmv",
    ".bz2" => "application/x-bzip",
    ".tbz" => "application/x-bzip-compressed-tar",
    ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type
    "" => "application/octet-stream",
    debug.log-request-handling = "enable"
    accesslog.filename = "/var/log/web-access.log"
    url.access-deny = ( "~", ".inc" )
    $HTTP["url"] =~ "\.pdf$" {
    server.range-requests = "disable"
    static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
    server.pid-file = "/var/run/lighttpd.pid"
    server.reject-expect-100-with-417 = "disable"
    fastcgi.server = (
    ".php" => ((
    "bin-path" => "/usr/bin/php-cgi",
    "socket" => "/var/run/mythtv-php-fcgi.socket",
    "broken-scriptfilename" => "enable",
    "bin-environment" => (
    "db_server" => "localhost",
    "db_name" => "mythconverg",
    "db_login" => "mythtv",
    "db_password" => "mythtv"
    setenv.add-environment = (
    "db_server" => "localhost",
    "db_name" => "mythconverg",
    "db_login" => "mythtv",
    "db_password" => "mythtv"
    cgi.assign = ( ".pl" => "/usr/bin/perl",
    ".cgi" => "/usr/bin/perl" )
    url.rewrite-once = (
    "^/{1,2}mythweb/(css|data|images|js|themes|skins|[a-z_]+\.(php|pl)).*" => "$0",
    "^/{1,2}mythweb/(pl(/.*)?)$" => "/mythweb/mythweb.pl/$1",
    "^/{1,2}mythweb/(.+)$" => "/mythweb/mythweb.php/$1",
    "^/{1,2}mythweb/(.*)$" => "/mythweb/mythweb.php"
    include "/etc/lighttpd/auth-inc.conf"
    Can somebody hint me where issue might be ?
    Thx n advance !

    @milomir,
    Thx for replay.
    While Your proposal is nice solution - this little now what I want to achieve.
    In my application curl usage is automated (curl is called by user script).
    My script has following entry:
    /usr/local/bin/curl -s -f -T "<file>" "<server>/<path>/<file>"
    Strange enough that I have setup which worked OK sometime ago.
    Since that time I do few system upgrades - and recently I discover that posting files via curl isn't working.
    Last days I was trying many combination including clean install of 64bit arch in VM and try to play with default settings.
    No matter what I'm doing - all the time I'm getting 404.
    I still think I miss something in configuration as i don't believe vanilla Arch/Lighttpd/Curl can't be used as http upload service with standard curt usage (like way it is used in my script).
    So maybe my original Q should be following: why I can't upload files with standard curl/wget usage ?
    -br

  • Can't upload file on my wiki

    Last month, I was able to upload files on my wiki with Server 4 and Yosemite. Now, something have change and the uploading just load forever without any error message. It happen even if I'm in the administrator account and on the computer of the server. I have change the permissions of the wiki folder (777), but I still can't upload files!
    How can I fix that?

    Hi Irina,
    Check this:
    /message/2977938#2977938 [original link is broken]
    Greetings,
    Praveen Gudapati
    p.s. Points are always welcome for helpful answers

  • Error : Unknown error trying to lock file

    Hello,
    I am facing this issue since last 2 weeks.
    I have one doc lib in it am saving excel documents. When am trying to open any excel document it wil open doc innitially in read only mode. When i click on "edit workbook" option to edit this excel file it will give me this error "Unknowen
    error trying to lock the file".
    Kindly share your views on this that how can i resolve this error.

    Try below:
    http://wiki.uky.edu/sharepoint/Wiki%20Pages/Unknown%20Error%20Trying%20to%20Lock%20File.aspx
    If it persists, there is a KB article about “Office 2003 and 2007 Office documents open read-only in Internet Explorer”, the scenario of your issue is very similar
    to the issue fixed in this KB article, I suggest following the resolution and checking. For more information, please refer to:
    http://support.microsoft.com/kb/870853
    http://social.technet.microsoft.com/wiki/contents/articles/11155.sharepoint-2007-unknown-error-trying-to-lock-file.aspx
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
    On the Edit menu, point to New, and then click Multi-String Value.
    Type AuthForwardServerList, and then press ENTER.
    On the Edit menu, click Modify.
    In the Value data box, type the URL of the server that hosts the Web share, and then click OK.
    Exit Registry Editor.

  • "Unknown error trying to lock file." SharePoint Online

    Greetings,
    I am setting up a document library that will be used by users in our terminal session environment.  Hosts are Windows 2008 Server R2. We are setup in a Office 365 / SharePoint Online. We have Office 2013 installed on the hosts.The test user that I have
    setup has Edit permissions to this document library. Whenever the user goes to open a document in the library it always opens in "Read Only" mode, and when trying to edit I receive the message "Unknown error trying to lock file." I have
    read other threads and already changed the following.
    -Put our SharePoint in the correct internet zone / and trusted sites (GP)
    -Setting to require documents to be checked out before they can be edited (Library Settings)
    -Allow documents for opening in Read/Write (GP)
    -Added registry entry for AuthForwardServerList including our Sharepoint site (Registry)
    Any help would be greatly appreciated.
    Thanks,
    -Magoo

    Hi Dermot,
    Did this issue happen to all web applicaitons, and all users?  What if you access SharePoint site drectely other than via TFS?
    Have you checked if there is any related error message in SharePoint ULS log or event in Event Viewer for any clue?
    Also check if SharePoint server application pool (scheduled) recycle could help.
    http://www.techbubbles.com/iis/recycling-application-pools-in-iis-for-sharepoint-2010/
    Thanks
    Daniel Yang
    TechNet Community Support

  • How can i upload files from one ip address to another  ip address machine ?

    how can i upload files from one ip address to another ip address machine ?

    i need to copy files from one client m/c to server m/c like sftp
    please suggest solution on this

  • Adobe photoshop lightroom won't install on my Mac - error can not open file

    Adobe Photoshop Lightroom4 will not install on my Mac. "Error can not open file" when trying to open will installer. If I cannot get it to work I would like to return product.

    What version of Mac OS are you using?  What is the exact name of the file which you are double clicking on?  If you right click on the file and select Get Info what does it state under the Open With section?

  • After Effects error: Can't import file "(FILE TITTLE)" unsupported filetype or extension

    Hello so I was working with AE3 for 2 years and i had no problems with it but.. when i reinstall my windows and install AE3 with same installation file as always i was using.. and  I got problem. When i try to import AVI or wmv or other video clips except mov format I getting this error "After Effects error: Can't import file "(FILE TITTLE)" unsupported filetype or extension".. i tried everything: 3 different installs of AE3 but nothing always same.. so decided this is windows problem so I installed new one  with SP3 but i got same problem then I tried it on SP2 but still same problem.. So i installed windows7 and my AE3 was working but i didn't liked a windows 7 and i back on xp SP3 and guess what guys? yes! i got same error again on AE3. I don't know guys what to do. Can you help me?

    I assume that you mean "After Effects CS3". After Effects 3 came out more than a decade ago.
    Do you have QuickTime Player installed? After Effects requires QuickTime to be installed to import some file types.
    Could you be explicit about exaclty what files you have tried to import? Even giving file names might help. For example, this error has been seen when the characters used in the file name were non-standard characters (e.g., this thread).
    When you re-installed Windows, did you also re-install any codecs that you may have previously had on the system?

  • How can i upload files in servlets and also using jsp

    means that uploading files(.doc) or any files by using servlets and jsps

    yawmark wrote:
    saichand wrote:
    means that uploading files(.doc) or any files by using servlets and jsps
    [http://www.google.com/search?q=How+can+i+upload+files+in+servlets+and+also+using+jsp]
    ~Good topic titles are indeed brilliant search keywords. It's sad to see that it won't even come in the mind of the topicstarters to Google it before posting the topic.

  • I created an iCloud account for my sons ipod tried to sign into the App Store and it just keeps coming up with unknown error can you help

    I created an iCloud account for my sons ipod tried to sign into the App Store and it just keeps coming up with unknown error can you help

    Skip the iCloud sign in for now.
    Once you reach the home page, go to settings and sign out of FaceTime and Messages.  This should also sign you out of iCloud.
    Go to iCloud in settings and sign in with the correct Apple ID.
    If that does not work
    Skip the iCloud sign in
    Go to Apple ID.apple.com and sign in
    Change your Apple ID to the old one
    Delete iCloud account on your device with the old Apple ID and the same password.
    Go back to the website, change your Apple ID back to the current one. You will receive an email to verify the account. Verify first.
    Sign into iCloud on your device with the correct Apple ID and password

  • After effects error: can't import file unsupported filetype...

    When I try to import my files from my Canon EOS 550D into AE it gives me this error-essage: "after effects error: can't import file unsupported filetype..." I recently updated my quicktime and stuff, but what should that do? I could import the files before though.

    See if anything here helps:
    http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

  • In KE13N How can I Upload files

    In KE13N How can I Upload files ? , Other than file should be in which format?

    Hi
    You need to first save file description from the planning layout.
    You need to go to transaction KEPM open the planning method. It will open in excel format provided you layout is excel integrated . In the menu there will be a option to format setting do this, save the excel sheet in the desktop.
    Once you do format settings and there will be a menu appearing as save file description click on this. After this you can update the excel file downloaded to your desktop and upload through transaction KE13N.
    Anand

  • Can't upload files in Firefox, using flash uploader. Already reinstalled flash, works ok in Chrome.

    I have a website where I can upload files to the site's server utilizing Flash - I have the latest Firefox and the latest Flash plugin (uninstalled and reinstalled). But the upload is failing - I only get an "Unknown I/O message. but only in Firefox - Works ok in Chrome. I have already run the Adobe uninstall/reinstall process, and I have also tried running Firefox in Safe Mode and the problem persists.

    Hi Bilinbaja,
    I am not sure if you are using FTP to upload the files, however this error can sometimes refer to a hardware issue. Please try to toggle the hardware acceleration by right clicking on a item using the flash plug in and selecting settings.
    Please let us know if this improves the performance as well as if this also happens on other computers, or if it still happens after you delete cache and cookies. Each browser has its own cache, Firefox's cache may also be longer. [[How to clear the Firefox cache]]
    Did this help? We look forward to your reply.

  • Unknown error about itunes library file cannot be saved (-50).

    I recently downloaded and installed itunes 7.3
    Now there's a problem.
    Everytime i open itunes, the error message saying "The iTunes Library file cannot be saved. An unknown error occurred (-50)."
    After which, some songs which i upload onto itunes after installing itunes 7.3 will be gone everytime i open itunes and i'll have to upload them again.
    Is there something I can do about it?
    Thanks!

    This thread seems to have the most information:
    http://discussions.apple.com/thread.jspa?messageID=4897181

Maybe you are looking for