Unknown error during backup of Bluetooth options

I tried to backup my 8900 curve via USB connected to Desktop Manager 4.7 (German) and get every time an "unknown error" at the "Bluetooth Options" part of the backup. The backup aborts at this point.
Any ideas?
Regards
Erik

Once I too faced similar issue. To get rid of it go to Backup and Restore -> click Advanced -> select Bluetooth Options -> click on clear to deleted those options. Now try to have a backup you device.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

Moving past "unknown error" in backup

Been using Windows Server Essentials 2012 for about a year as a server in my home. Everything has worked well, until recently.
One of the computers consistently fails backup. The error message, "an unknown error prevented backup from completing successfully" is less an helpful. The computer runs Windows 8.1 and has no problem with access to server folders.
It is not going to sleep during the attempted backup sessions. I have run error checking on drive. No errors found.
Suggestions, please.
Thanks!

Hi,
On current situation, would you please let me confirm something more?
1.
à
The error message, "an unknown error prevented backup from completing successfully" is less a helpful.
Did you mean that open LAUNCHPAD, click Backup option, and then this error message occurred when click Start
backup button in Backup Properties panel?
2. Please logon the server and open Dashboard, select DEVICES tab. Then check Status of this client computer which failed to backup.
3. Please run
vssadmin list writers via Command Prompt and check if find errors.
4. In the problematic client computer, please follow the path: C:\ProgramData\Microsoft\Windows Server\Logs, then check BackupLaunchpad log file if find some relevant clues.
(Please Note: the folder is hidden. Please open Control Panel, select Folder Options, select View tab and check ‘Show hidden files, folders and drives’. Then please check.) Meanwhile, please open Event Viewer and check if some relevant events
were logged. Those may help us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

BR278E error during backup

HI all,
Our database backup was running ok for the passed 3 months after the SAP system was installed. Recently, I keep getting BR278E error during backup. Below are the error message:
BR0202I Saving init_ora
BR0203I to /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/PRD/102_64/dbs && /usr/sap/PRD/SYS/
exe/run/brtools -f printarg initPRD.ora spfilePRD.ora | LANG=C cpio -ovB > /dev/
rmt/0mn':
initPRD.ora
spfilePRD.ora
^GEnd of medium on "output".
To continue, type device/file name when ready.
The SAP system is on Solaris/Oracle running ECC6.0. LTO-4 tape drive is used for the backup. Tape_size in initSID.sap is set to 720000M. Current database size is 128Gb.
What is the reason for the backup failure?
Rdgs,
Lim

Hi,
This is my initSID.sap
@(#) $Id: //bas/640_REL/src/ccm/rsbr/initSUN.sap#4 $ SAP
backup mode [all | all_data | full | incr | sap_dir | ora_dir
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
default: all
backup_mode = all
restore mode [all | all_data | full | incr | incr_only | incr_full
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
redirection with '=' is not supported here - use option '-m' instead
default: all
restore_mode = all
backup type [offline | offline_force | offline_standby | offline_split
| offline_mirror | offline_stop | online | online_cons | online_split
| online_mirror
default: offline
backup_type = online
backup device type
[tape | tape_auto | tape_box | pipe | pipe_auto | pipe_box | disk
| disk_copy | disk_standby | stage | stage_copy | stage_standby
| util_file | util_file_online | rman_util | rman_disk | rman_stage
| rman_prep]
default: tape
backup_dev_type = tape
backup root directory [<path_name> | (<path_name_list>)]
default: $SAPDATA_HOME/sapbackup
backup_root_dir = /oracle/PRD/sapbackup
stage root directory [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
stage_root_dir = /oracle/PRD/sapbackup
compression flag [yes | no | hardware | only]
default: no
compress = hardware
compress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<target_file_name> = <source_file_name>.Z
for compress command the -c option must be set
recommended setting for brbackup -k only run:
"compress -b 12 -c $ > $"
no default
compress_cmd = "compress -b 12 -c $ > $"
uncompress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<source_file_name> = <target_file_name>.Z
for uncompress command the -c option must be set
no default
uncompress_cmd = "uncompress -c $ > $"
directory for compression [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
compress_dir = /oracle/PRD/sapreorg
brarchive function [save | second_copy | double_save | save_delete
| second_copy_delete | double_save_delete | copy_save
| copy_delete_save | delete_saved | delete_copied]
default: save
archive_function = copy_delete_save
directory for archive log copies to disk
default: first value of the backup_root_dir parameter
archive_copy_dir = /oracle/PRD/sapbackup
directory for archive log copies to stage
default: first value of the stage_root_dir parameter
archive_stage_dir = /oracle/PRD/sapbackup
new sapdata home directory for disk_copy | disk_standby
no default
new_db_home = /oracle/C11
stage sapdata home directory for stage_copy | stage_standby
default: value of the new_db_home parameter
stage_db_home = /oracle/C11
original sapdata home directory for split mirror disk backup
no default
orig_db_home = /oracle/C11
remote host name
no default
remote_host = <host_name>
remote user name
default: current operating system user
remote_user = <user_name>
tape copy command [cpio | cpio_gnu | dd | dd_gnu | rman | rman_dd]
default: cpio
tape_copy_cmd = dd
disk copy command [copy | dd | dd_gnu | rman]
default: copy
disk_copy_cmd = copy
stage copy command [rcp | ftp]
default: rcp
stage_copy_cmd = rcp
flags for cpio output command
default: -ovB
cpio_flags = -ovB
flags for cpio input command
default: -iuvB
cpio_in_flags = -iuvB
flags for cpio command for copy of directories to disk
default: -pdcu
cpio_disk_flags = -pdcu
flags for dd output command
default: "obs=16k"
recommended setting:
Unix: "obs=nk bs=nk", example: "obs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_flags = "obs=64k bs=64k"
flags for dd input command
default: "ibs=16k"
recommended setting:
Unix: "ibs=nk bs=nk", example: "ibs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_in_flags = "ibs=64k bs=64k"
copy_in_cmd = "dd ibs=64k obs=8k if=$"
rewind command
rewind = "mt -f $ rewind"
rewind and set offline command
rewind_offline = "mt -f $ offline"
tape positioning command
tape_pos_cmd = "mt -f $ fsf $"
recommended values for tape devices with hardware compression:
tape_size = 720000M
address of backup device without rewind
tape_address = /dev/rmt/0mn
address of backup device with rewind
tape_address_rew = /dev/rmt/0m
volumes for brarchive
volume_archive = (PRDA09, PRDA10)
volumes for brbackup
volume_backup = (PRDB09, PRDB10)
expiration period for backup volumes in days
expir_period = 5
recommended usages of backup volumes
tape_use_count = 260
Edited by: limws1 on Aug 27, 2011 4:44 AM

Unknown Error during Recovery - iPad no longer Recognized by iTunes

I have a 3rd Generation iPad which I was attempting to perform a factory reset. I received an "Unknown Error" during the process and from that point on I have been unable to get iTunes to recognize my iPad in recovery mode (or otherwise).
I have tried every thread on the subject, but I found one interesting thing. If I connect the iPad with the same cable, etc. to another computer it immediately recognizes it in recovery mode and offers to restore the iPad.
It seems like my computer is not recognizing the iPad because it was in the process of restoring the device when the error occurred. Does anyone know if there is a way to reset or fix this issue. I would prefer not to update iTunes and download both the new iTunes and iPad software again and use another computer if it is not necessary.
Any help would be appreciated.
Thanks

Hey KSHItunes,
That was a good test to try your iPad on another computer. It does seem to isolate the issue to something with your computer setup.
Although you would prefer not to update iTunes, there may be steps in this article which can help.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Please check it out.
Regards,
Nubz

Was updating iPad to iOS 5. Received unknown error during restore. Didn't sync. Appears to be wiped out. Can anyone help? Thanks!

Was updating iPad to iOS 5. Got unknown error during restore. Now it appears to be wiped out. Screen just asks to be plugged into iTunes, which doesn't recognize thx iPad. Have rebooted both. Please help! Thanks.

See if anything on this page helps : http://support.apple.com/kb/ht4097 - it covers update and restore problems

1: Unknown error during installation

Hi,
Where having problems with the process of Fixed Assets. We are adding datas in te ff: forms: Fixed Asset Master Data, Asset Classes, Account Determination and Fixed Asset Aquisition. The error appeared in the lover area in red color stating 1: Unknown error during installation
Please advise what to do.
Regards,
IAN

Hi
It is difficult to say but more looks like corrupt installation .You probably have to reinstall .
This thread might be of some help
Error Installing Fixed Assets
Start Fixed Assets Add-on Error
Thank you
Bishal

Error during backup process

Hi,
Our system on a daily basis creates a backup of Sql Server 2008 database. It is using "backup database {0} to disk='{1}'" command. It works for years now, but recently a problem occurred.
On our system side the following exception is thrown:
System.Data.SqlClient.SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
Processed 1442744 pages for database 'hist', file 'hist' on file 1.
Processed 4 pages for database 'hist', file 'hist_log' on file 1.
Sql Server log:
Backup,Unknown,BACKUP failed to complete the command BACKUP DATABASE hist. Check the backup application log for detailed messages.
Backup,Unknown,Error: 3041<c/> Severity: 16<c/> State: 1.
Backup,Unknown,Database backed up. Database: hist<c/> creation date(time): 2013/05/20(14:13:10)<c/> pages dumped: 1368896<c/> first LSN: 2054:172392:244<c/> last LSN: 2054:172493:1<c/> number of dump devices: 1<c/> device
information: (FILE=1<c/> TYPE=DISK: {'e:\backup\hist20131129.dmp'}). This is an informational message only. No user action is required
There are no other errors. The same problem occurred twice during last few weeks. DBCC CHECKDB is not returning any errors. Any idea where the problem may be?
Many thanks,
Martin

Hi Martin
your error says :
Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database.
The backup/restore operation was still successful.
Processed 1442744 pages for database 'hist', file 'hist' on file 1.
Processed 4 pages for database 'hist', file 'hist_log' on file 1.
1. The backup/restore operation was still successful.
----------> Seems your backup got completed but job failed , you can confirm checking backup history using below code
select b.database_name, b.type, bf.physical_device_name, b.backup_start_date, b.backup_finish_date
, b.server_name , b.machine_name ,b.[user_name]
from msdb..backupset b
left outer join msdb..backupmediafamily bf on bf.media_set_id = b.media_set_id
where b.type in('D') and b.database_name = 'msdb'
order by b.backup_finish_date desc
2. Could not insert a backup or restore history/detail record in the msdb database.
---> This cant be access issue as insertion happens internally, But space in msdb can be a issue. you can check same using below
Check database size and free space in SQL Server
Thanks Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/
Please click the Mark as answer button and vote as helpful
if this reply solves your problem

Disk errors during backup

Hi, I'm baaaaaaack!
I have a new (replacement) Netware 6.5 SP8 server running Groupwise,
with 4 RAID'ed 450GB 10K SAS drives giving me about 1.2TB of space. In
keeping things arranged close to the way they were before I arrived, for
now at least, I have a "DATA_POOL" which holds "SYS2" volume. During
nightly backups, since the new server went in about 12 days ago, I'm
getting backups failing, and eventually the SYS2 volume dismounted last
weekend during the full backup.
I tried doing a poolrebuild even though poolverify showed no errors, per
Symantec & Novell documentation, and that didn't suffice. Had to do the
"purge" rebuild, and then was able to re-mount the volume. I wasn't
sure if the error was somehow related to the server migration, so I
tried the same full backup again and got the same nasty results.
Rebuilt again, and made some changes to the OFMCDM.CFG file as
recommended in some Symantec documentation, and the backups have been
succeeding.
However, the logs show lots of entries like the following, still, always
during the backups:
3-08-2011 9:43:15 pm: COMN-3.26-178
Severity = 5 Locus = 3 Class = 0
NSS-2.70-5009: Pool AIRP_COMM/DATA_POOL_SP had an error
(20012(beastTree.c[510])) at block 129200397(file block
-129200397)(ZID 1).
3-08-2011 9:43:15 pm: COMN-3.26-180
Severity = 5 Locus = 3 Class = 0
NSS-2.70-5008: Volume AIRP_COMM/SYS2_SV had an error
(20012(beastTree.c[510])) at block 129200397(file block
-129200397)(ZID 1).
It's not clear to me if this means it *has* to be a disk drive error.
New disks would seem to increase the likelihood of physical disk
failure, but it only happens during the Backup Exec 9.2 backups of this
volume, and never on the SYS volume during those same backups.
The Groupwise total database is about 100GB, and the total volume space
is about 800GB, if that matters. (This server is built to GROW.)
Suggestions? Does this clearly point to a hardware (disk) error even
though it only happens during backups, and the symptoms changed when I
made the OFM configuration changes?
The changes I made to OFMCDM.CFG were:
InitialCacheSize = 0x0000000000400000 (was 200000)
CacheSizeExpandThreshold = 0x30 (was 0x1e)
The old server didn't have any problems backing up, and everything was
brought over intact/identical in configuration, even though the above
changes did seem to help somewhat. I'm posting here because this seems
more of a "storage" (disk) issue than really a backup issue, despite the
failures occurring during backups.
Any suggestions, or clarification about the above cause & possible fixes?
Thanks.
-- DE

Thanks, but I don't know of any way to back up Groupwise without using
OFM; you just can't get the data if you do that because so many
important files are open. And I do agree that it's OFM if it is not a
hardware issue.
Your entries under "device" look like the defaults, which I started
with, and yet there are a bunch of references on the Symantec (Backup
Exec) site which suggest changing those. But I will want to compare
your entries with mine, higher in the file, to see if there is any
particular setting that is non-default and might address the issue.
I do have slots for a spare drive on this new server. Currently, the
cache is directed to the very same volume that is having issues,
although it worked fine that way in the past on the old server. But I
can easily get another drive if that will resolve this.
Thanks.
-- DE
[email protected] wrote:
> Besides other possibilities I would at first take the OFM
> out the game and run backups without it.
>
> In case that does the trick and you need to backup open file
> - as we did - I would try the following (here we run
> NW6.0-SP5 with BackupExec 9.1 and OFM from St. Bernard,
> which comes with BE):
>
> Place a single spare disk in the server with a seperate pool
> and volume and direct the open-file-cache to this device. In
> our case it is directed to TMP and the ofmcdm.cfg is the
> following:
>
> [General]
> BreakOnAssert = 0x1
> BreakOnException = 0x1
> MinServerMemoryPercent = 0x6
> StatusPrintLevel = 0x0700000000000000
> ThreadsPerQueue = 0x3
> QueuesPerPool = 0x1
> WriteInactivityPeriod = 0x2
> SyncTimeOut = 0x3c
> CacheLFS = 0x0
> CacheBlockSize = 0x4000
> GetHamSetStateTimeout = 0x3c
> LFSCachePoolName =
> BackupCachePoolName =
> BreakOnCluster = 0x0
> VerboseMessageLogging = 0x0
> SyncLFSVolumes = 0x0
> CacheToLFSVolumes = 0x0
> AutoMountVolumes = 0x0
> LogFileBufferSize = 0x10000
> LogFileNumBuffers = 0x4
> LogFileWriteFrequency = 0xf
> DebugDumpOnSyncFail = 0x0
> LFSCacheLocation =
> BackupCacheLocation =
>
> [Advanced]
> SmallEmergencyMemBlockSize = 0x400
> SmallEmergencyMemBlockCount = 0x32
> MediumEmergencyMemBlockSize = 0x2800
> MediumEmergencyMemBlockCount = 0xa
> LargeEmergencyMemBlockSize = 0x19000
> LargeEmergencyMemBlockCount = 0x2
>
> [Device SYS]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device BAK]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device TMP]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x79
>
> [Device GWX]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device IVM]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device ZFD]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
>
>
> I do not remember all the other tweaking we did with the
> BE-Support, but this finally did the trick and helped us to
> run the server without any problems.
>
> Sincerely
>
> Karl

Errors during backup of MSSQL 2005 using DB13

Hi,
I have an ECC 5.0 system, and when I try to perform any kind of backup of a MSSQL 2005 database using DB13 I get an error like this:
Modified: 2006-12-05 11:43:55.
Command:    pc1.sap_backup_databases
             @dblist="PC1,master,msdb",@r3db="PC1",@bdev="PC1
           _v2",@unload=0,@jobname= "SAP CCMS Full DB Backup
           of PC1,master,msdb [20061205114354]"
Descript: SAP CCMS JOB
*********** Task history information ***********
For run:   20061205 23:00:00
Status:    0          (failure)   (see DB error log)
Message:   3013
Severity: 16
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITYSYSTEM. DBCC execut
           ion completed. If DBCC printed error messages, con
           tact your system administrator. [SQLSTATE 01000] (
           Message 2528) The user-specified MEDIANAME "ID05S
           " does not match the MEDIANAME "ID29S" of the devi
           ce "PC1_v2(D:BackupPC1_2.bak)". [SQLSTATE 42000]
            (Error 4037) BACKUP DATABASE is terminating abno
           rmally. [SQLSTATE 42000] (Error 3013). The step
           failed.
The strange thing is that if I create a new backup device in MS SQL Server Management Studio, and assign a backup job to use this backup device, the backup is successfull... but only the first time I schedule the backup. Following backup attempts to same device fails with the error message above.
Any ideas, anyone?
Regards,
Thomas

Hi Kan,
So your suggestion is that I should run a backup with the format media option selected? I believe I have tried that, but I will nevertheless give it another go.
Will keep this thread open in the mean time.
Thomas

Error during backup!

I have getting errors with the last 3 versions of PC Suite when trying to make a full backup.
It seems like it won't backup my calender.
It says my calender is in use.
I DO have data in the calender.
I have no 3rd party calender installed.
Doesn't PC Suite shut that down during backup?
I'm using Windows XP Pro SP2
Phone is a Nokia 6670.
Current PC Suite is v6.70.22
SnowmanDK

I did try taking out the battery several times.
Don't know my firmware version (how can I find it?).
I'm trying to use the backup from PC Suite (not the phone).
I have found out that I can make the backup when I force all services to quit before doing it.

Unknown errors during manual software update package installation

Hi,
I'm new to the forum.
Recently I've got a serious trouble while installing standalone update packages from disk image files.
After typing my username and password to update my OS manually my computer suddenly fails to install the software packages saying that "the installer has encountered an unknown error which caused the installation to fail."
I've an early 2009 Mac Mini which I bought during the first half of that year. The problem affects all versions of Mac OS X (10.5 and later). It's normal? I've tried everything (permissions repair, SMART check) to fix the problem with no luck. Now I suspect the issue has something else with bad memory or a faulty hard disk.
How curious, System Graph had put a new Super Drive on it because the original had its laser head damaged due to extensive use.
Cheers,
John

FIXED!
Many DMG executables failed to install because their certificates were outdated.
To resolve the problem: uncheck the automatic time setting box and set the clock to an early date.

-50 unknown error during restore after download of 1.11

My unhacked I Phone gives me unknown error -50 during download and restore of new software. The phone has gone nuts. No hacks on phone. Travelling outside of the USA I cannot get service. Any suggestions?

ok

Mac OS 10.5.6 Tung C - Unknown error during sync - application closes

Since my recent 10.5.6 update I am unable to complete my sync.
Everything initiates fine. Several items seem to initiate but when it starts my epocrates sync the software closes with an unknown error. I have reinstalled mac 421RevD twice with no change.
Please help.
Thanks
Post relates to: Tungsten C
Post relates to: Tungsten C

How about try to disable the two Epocrates conduits from the Conduit Settings of the Hotsync Manager? This would really isolate whether its a Palm or Epocrates issue. You may try to consult with Epocrates support if ever it would sync sucessfull without the two conduits activated.
Post relates to: Palm m105

Unknown error during 10.4.6 update and now machine doesn't startup

Hi all
As with many people, the update broke my machine.
The update failed with an unknown error. Then no apps would start, so I rebooted, and now the PB won't start, just goes to the Apple with the spinning thingy beneath, and sits there forever.
And suggestions on how to fix this, shy of archive and install?
I can boot off a 10.3 firewire drive and look at the drive. I tried running the standalone update from this to update the 10.4.5 system, but the update won't run because I'm not running the correct system. Thanks, Apple.
So, ideas?

First off, verify the directory is okay with Disk Utility. From there, if you're confident in Terminal, you may be able to recover. I've done it when my 10.4.4 update failed due to directory corruption.
[1] Copy the 10.4.6 Combo Updater onto the 10.4 drive, top level.
[2] Boot into Single User mode off the 10.4 drive.
[3] IF you get into single user mode successfully, proceed with fsck'ing and mounting the volume.
[4] Use hdiutil to mount the Combo Updater (ie hdiutil attach /MacOSXUpdCombo10.4.6PPC.dmg).
[5] Run installer to rerun the combo updater (ie, installer --pkg /Volumes/Mac\ OS\ X\ 10.4.6\ Combined\ Update/MacOSXUpdCombo10.4.6PPC.pkg --target /).
[6] Reboot and see if it worked!
Basically, the idea here is that the Combo updater can overwrite clean copies of all the apps that 10.4.6 tried to update, but since the GUI is hosed you need to come at it from the command line tools of single user mode. So if, it works, you're up and running again. If it doesn't, then you're probably going to have to do an archive and install to get operational again.
Best o' luck!
Various... B&W G3 thru XServe G5

Unknown error during manual creation Inbound Delivery in EWM

Hello all,
I'm building a demo for an SAP EWM system. It's installed on an existing SCM system, and is connected to ECC 6.0.
The replication of Inbound Deliveries from ERP to EWM is going fine. However, when I try to create an Inbound Delivery in EWM manually (tr. /SCWM/PRDI), I get the following error message:
Unknown error has occurred in target system - Message no. /SCWM/DELIVERY_UI056
Does anyone know how to solve this error?
Thanks in advance, best regards,
Oliver

Hello Fransesco,
I've checked the settings you mentioned, but all seems fine.
The correct Business system and SAP Release have been entered, and in the Inbound Delivery settings I can see that it is allowed to create Inbound deliveries in EWM.
Any other suggestions?
Thanks & regards,
Oliver

Unknown error during backup of Bluetooth options

Similar Messages

Maybe you are looking for