Unknown error during import
I have a video from my new camera on an SD card. I recently installed iLife 06 on my 1ghz iBook G4 and have updated to iMovie 6.01, but when I try and import it I get an error "The file could not be imported: Unknown Error".
I can plug that exact same SD card in the exact same reader into a Mac at the local CompUSA store and both iMovie 6.01 (on Intel dual core iMac) and iMovie 5.02 (on iBook G4) import it just fine.
Why doesn't it work on my iBook?
Al 3 have Quicktime player 7.0.4, not quicktime pro.
What else can I try?
It's a Canon Powershot 2 SI and uses AVI files. I believe "avi" is a generic type (kinda like xml?) so the associeted definition file is required in order to read it.
I talked to the CompUSA Apple guy and he said that iMovie HD should be able to handle it without needing anything else. That's why I checked for Quicktime Pro. He also implied that those systems we just straight installs - nothing special added.
It really surprised me when iMovie 5 could read it. The files play OK in Quicktime on my iBook and iPhoto 6 successfully imports them as well.
Where would I look for installed "codecs"?
Similar Messages
-
Unknown Error during Recovery - iPad no longer Recognized by iTunes
I have a 3rd Generation iPad which I was attempting to perform a factory reset. I received an "Unknown Error" during the process and from that point on I have been unable to get iTunes to recognize my iPad in recovery mode (or otherwise).
I have tried every thread on the subject, but I found one interesting thing. If I connect the iPad with the same cable, etc. to another computer it immediately recognizes it in recovery mode and offers to restore the iPad.
It seems like my computer is not recognizing the iPad because it was in the process of restoring the device when the error occurred. Does anyone know if there is a way to reset or fix this issue. I would prefer not to update iTunes and download both the new iTunes and iPad software again and use another computer if it is not necessary.
Any help would be appreciated.
ThanksHey KSHItunes,
That was a good test to try your iPad on another computer. It does seem to isolate the issue to something with your computer setup.
Although you would prefer not to update iTunes, there may be steps in this article which can help.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Please check it out.
Regards,
Nubz -
Error importing SharePoint site collection - "there is an error during importing the Roles tag"
Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks. -
Error During Import: File Could Not Be Imported
I am trying to load some .AVI movies from my digital camera into iMovie; most of them will, but 1 or 2 for some reason will not. I have played some of these videos on my old G3, which I replaced with this new computer; most loaded in OK.
The clips that won't load look smaller than the others when playing (don't know why). I played the movies and converted them to Quicktime again in MPEG Streamclip and they played fine (also in VLC PLayer, FWIW).
I am getting this error message: Error during Import: File Could Not Be Imported.
Also, I am trying to change the orientation of one clip that I inadvertently shot sideways; I did this in Bitlist but it won't load now into iMovie. Is there away to change the orientation in Quicktime (I'm not buying QT pro) or another free converter that will work?
Thanks in advance...try to ...
* open the avi/mpegs in Streamclip
* choose 'DV stream' as export option
* in the 'DV stream' dialog, you're offered the option 'turn'.. rotate in the wanted direction and choose '75%' size to get all into the video... -
We are on BO 11.5.0.0 and using the COM SDK with Visual Basic to run multiple reports (sometimes multiple flavors of the same report) through a bat file.
If we run the reports single-threaded through the bat file, the reports run fine. However, if multiple versions of the bat file start at approximately the same time, we get one of two errors:
91 Object variable or With block variable not set
102 Error during import document -
Here's the part of the code with the problem:
Dim BOapp As busobj.Application
Dim receiveDoc As busobj.Document
Set BOapp = New busobj.Application
BOapp.Interactive = False
BOapp.Logon strUser, strPass, strFromSystem, "Enterprise", False, False
BOapp.Visible = False
Set receiveDoc = BOapp.Documents.OpenFromEnterprise(strFromRep, strFromFolder, boFolder)
receiveDoc.SaveAs (strDocumentPath & strFromRep & ".REP")
Values for the following variables are passed in from the bat file:
strUser
strPass
strFromSystem
strFromRep
strFromFolder
strDocumentPath
If it fails on the OpenFromEnterprise statement, we get the 102 error.
If it fails on the SaveAs statement, we get the 91 error.
Running it through debug hasn't helped, since we are running only one report.
Any thoughts on what could be going wrong?
Thanks in advanceI have tried this running the VB code on my desktop (outside of the bat file) and nothing out of the ordinary occurs. The VB code runs fine with only one occurrence.
I had seen on other posts "ThisDocument" and didn't know if it would be applicable in this situation. I also wasn't sure how it should be used based on the rest of my code. Would "ThisDocument" make a difference?
Thanks again -
SEVERE: DB Error during import of BC_SL_ACTIVE_PARTS
Hello all,
We are trying to perform the system refresh using sapinst (load based) on AIX/DB2 UDB environment.
During the "Import Java Dump" phase, we are getting the below error;
SEVERE: DB Error during import of BC_SL_ACTIVE_PARTS
SEVERE: Message: The object of type java.sql.Date with the value '2006-06-22 07:
00:00.0' assigned to host variable 5 is not normalized. It must not contain time
components in the time zone running the virtual machine.
SEVERE: SQLState: SAP06
SEVERE: ErrorCode: 1001124
As per the OSS note 915548 we changed the Server & Desktop time zone to GMT+01:00, and started a fresh installation.
However we are still facing the same issue. Does anybody have a resolution for this, if so please help me, I shall definitely reward you.
Thanks in advance.
Regards,
Kiran.Hello,
I've got exactly the same problem.
I was installing a CRM50 Unicode System, using a System Copy procedure.
(Source System platform: Win2003 x86, MsSQL2005, j2sdk-1_4_2_13-windows-i586-p.exe)
Into a Target System Platform:
- Processor Geniune Intel Xeon 3 Ghz x86
- Windows 2003 x64 bits
- MS SQL Server 2005
- j2sdk-1_4_2_13-windows-amd64.exe --> 941595 - Download J2SE 1.4.2 for the x64 platform Java
- j2sdk-1_4_2_13-windows-i586-p.exe
(both Java versions installed, according to the Sap note)
I already did what you said:
- Change timezone
- Uninstall CRM50, using sapinst\Aditional Software Life Cycle Task\...
- Reebot the server
- Staring a fresh installation again
Please advise, I've been working for the last four days on this, with no luck.
Maybe the problem is java version, perhaps j2sdk-1_4_2_09-windows-amd64.exe or another one would be enough, or, I need to reinstall everything since the beginning, including MSSQL2005.
Can someone help us out please, thanks. -
When importing in FCPX 10.1.3 I get: The following clip encountered an error during import and is still referencing media on the camera: ??? anyone
I get this sometimes too, when importing from P2 cards. Sometimes it takes me a few tries to get it imported. I have noticed that it seems to work better when I actually mark an IN and Out for the clip, but that's not totally a solution.
-
I am getting this message when I try to import files from Canon C100: The following clip encountered an error during import and is still referencing media on the camera:
These are AVCHD files and it seems to be happening randomly. With different clips as I try to import...happening both with regular importing and with Create Optimized Media...
It just started happening yesterday-never had this problem before and have uploaded countless times with this camera and system. THanks.Update: OK, I just tried to import the footage into another hard drive (an internal hard drive) and it seems to be going fine now. Maybe something is corrupted on the external hard drive I was importing into...wierd.
-
Error during import (-40)
I have a G5 Dual 2G with 2G of ram running Imovie 3.0.3. I am trying to import a 42.9M mp4 file and a 189.9M .mov file and am getting this error message after about 6 minutes of trying to import: "Error during import (-40)".
Can anyone tell me what the problem might be? I have serched the forum and came up with the "Use Streamclip 1.8" thats why I could make the 189.9M .mov file into the 42.9M mp4 file.
I was sucsesful in importing 38.5M .mov files into itunes but I seem to have a limit. Does this make sense to anyone?
Thanks for the help.Aquilafisher,
You can open the 189.9 mov file in MpegStream clip and export to DV format for iMovie (DV is iMovie's native format).
When you choose export to DV format you'll be presented with the "DV Exporter Window" with several options. One option is to "Split DV into Segements" Choose it (This option automatically splits the clip into 2gb or less segments).
You can export the segments directly into your iMovie project's media folder. Next time you open the iMovie project you'll be offered the option to have those segments moved to the clips pane (you can also import the segments but that takes longer).
I was sucsesful in importing 38.5M .mov files into itunes but I seem to have a limit.
Is this the same file 49mb mp4 file that you could only partially import or is this a different file that you were successful importing?????
Is there any particular reason you exported to mp4 first, exactly what are you trying to accomplish? -
'Error during import of clipboard contents' runing from ITS server
Dear Friends,
when I execute the report and smartform program from ITS server it is giving a error message 'Error during import of clipboard contents' in the web page.
Please guide me how to resolve this issue.
Thanks & Regards
Tapas DuttaHi Victor,
Good Morning.
Can you please confirm you are installing new SAP NW Java system on the same host where SAP NW ABAP is running or you are trying to install SAP NW JAVA as addin installation to existing SAP NW ABAP?
Regards
Naveen Garg -
For some reason, I get an "error during import" message when i try to drag my photos into my movie. (i've done it before successfully) They show up in my photo library when i click on the photos tab in imovie, but it wont let me import them. any thoughts?
WHen I tried to drag all my pictures of that Album (or one at a time) from the iMovie picture pane displaying that Album, I get an error
Why are you doing this? Every album (in fact, every photo, whether in an album or not) in your current iPhoto library is directly available from the pop-up menu when the "photos" tab is selected in iMovie. There is nothing that needs to be imported. Only photos that have not been previously incorporated into iPhoto need to be dragged to iMovie. -
Was updating iPad to iOS 5. Got unknown error during restore. Now it appears to be wiped out. Screen just asks to be plugged into iTunes, which doesn't recognize thx iPad. Have rebooted both. Please help! Thanks.
See if anything on this page helps : http://support.apple.com/kb/ht4097 - it covers update and restore problems
-
Error during Import (-2126)
I have imported Quicktime files from my computer into iMovie before (clips orginally from my digital camera) with no problem. However, when I go to import now I get the message "Can't open file "xxxx.AVI"; skipping it and continuing" then right after the message "Error during import. The file could not be imported (-2126)" If anyone knows why this would happen and I how I can fix it, that would be amazing.... Thanks in advance!!
** I have Quicktime version 7.0.1 and iMovie 4.0.1 if that helps.
iMac G5 Mac OS X (10.3.9)iMovie does not work with AVI files. You have to convert the file to a format that iMovie understands.
Start here...
http://www.danslagle.com/mac/iMovie/qt_plugins/3000.shtml
Patrick -
1: Unknown error during installation
Hi,
Where having problems with the process of Fixed Assets. We are adding datas in te ff: forms: Fixed Asset Master Data, Asset Classes, Account Determination and Fixed Asset Aquisition. The error appeared in the lover area in red color stating 1: Unknown error during installation
Please advise what to do.
Regards,
IANHi
It is difficult to say but more looks like corrupt installation .You probably have to reinstall .
This thread might be of some help
Error Installing Fixed Assets
Start Fixed Assets Add-on Error
Thank you
Bishal -
"Error During Import" after authorization
HI all,
I transferred a few songs from my desktop to my laptop. The songs play fine in iTunes after the transfer. When trying to use the music in iMovie, it asks for authorization (I only have my songs authorized on 1 computer). I give my password and a messaage pops up saying that the authorization was successful. I try to import the song into iMovie and the message I get is:
*Error During Import*
The file could not be imported: The file “(file path)” isn’t authorized for this computer.
Any ideas?
TIA!Hi c
Only way around I use is:
• in iTunes export out as audio-CD .aiff
• use this in Your movie project
Yours Bengt W
Maybe you are looking for
-
Issue with windows / crushing
Hello. I have Aperture starting without displaying any windows - it keeps to be just a menu line in the taskbar - and crushing when I do try turn on option to show some (Show Inspector HUD, for example). Process: Aperture [2536] Path:
-
Load XML with dynamic filename
Hi, I am trying to create a load xml function where I can send the filname to load to the function, however I get a syntax error with the following function, can anyone see what is wrong here? function loadXML(file){ myXML:XML = new XML(); myXML.igno
-
Reporting services integration feature not available in 2010 experience mode site collection.
I have a 2013 SP farm with SQL reporting services 2012 configured. When I create a site collection using the 2010 experience mode, I don't see the "Reporting Services Integration" feature under site collection features. However this feature is availa
-
I have the 64bit version of itunes on windows 7. When I connect my iphone5 it says that I don't have the correct software and that I need to install itunes 64bit! And I can go no further! I've uninstalled and reinstalled but it makes no difference. I
-
How to see which methods/classes are important?
Hi Everyone, I am a beginner writing one of my first applications and I have a very newby question. How do I organize and manage many methods (and classes) to see which are the important ones and which are not? The questions arised for me because I n