Unknown Error occur when trying to get a visual report - Project 2013

I have office 2013 home and student and ms project 2013. I am trying to get it to do visual reports and
all i keep getting is an error message saying an unknown error has occurred and the requested action cannot be completed at this time. help please if anyone knows a solution.
i got all the updates for Project and to Office.
the problem also occur on a different machine , with a different OS.
Please help ! , this is important feature of project that i must have working.
Thank you.

Hi Ariel,
Have you tried to repair MS Project from the control panel?
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Similar Messages

Unknown error occurred when trying to play film clip in Facebook.

Since the latest update I have problems when I want to watch film clips posted on Facebook.
This only happens with clips that are shown "in" Facebook, if it's a link to a clip outside of Fb it's not a problem.
When trying to watch a clip it says, either directly or various times into the clip, "An unknown error occurred when trying to play a film clip".
if I try over and over again the clip finally plays to its full length but it really annoys me.
Anybody got an idea?

We got some reports of this lately and as you say, it only happens in Facebook.
Try clearing data for the Facebook app under Settings -> Apps and se eif that helps. If not, please see this thread: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Facebook-Videos-not-playing/m-p/727861
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

'An unknown error occurred when trying to play the...

Hello,
I have had a BT Vision package for a few months but we recently moved house and wanted to transfer our services. Since moving in, we have got the telephone, internet and TV channels working however we are struggling with the additional TV services (i.e. catch up, recording, on demand).
Everytime we try to play something on catch up or via on demand, or try to play a recorded programme, it attempts to load but then the following error message appears at the bottom of the screen in a red box - 'An unknown error occurred when trying to play the video OutputProtectionEnableFailed'
I have phoned BT's technical department on several occasions who have not been able to resolve the issue. I have tried Googling this error message and searching BT's website however I cannot find any comments about this error. BT have offered to send a technician out however will automatically charge £99 if this is an error with the cable rather than the BT box. This is a lot of money and I am not able to risk this potential charge when I'm not sure what the problem might be.
If anyone know's what might be causing this , or has had the same error message themselves, I would be very grateful to know.
Many thanks,
SHyde

Sounds as though you may have an account not properly set up. Drop the Mods a note and they can check what's going on with your account
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Why do I get a message that an unknown error occurred when trying to download a NYTimes cross-word using AcrossLIte, which happens only on Firefox 4?

With Firefox 3, I had no trouble downloading cross-word puzzles from the NY Times website, using the app. Across Lite. After installing Firefox 4, each attempt to download a puzzle evoked the message that the file could not be opened "because an unknown error occurred" The puzzles can still be downloaded through Safari and Camino, so the problem is probably with Firefox 4.

Reset IE to defaults.
Tools > Internet Options > Advanced > Reset

Why pages sometimes tells me : "an unknown error occurred" when trying to export a document into .docx or .pdf ?

Hello !
Since I've done the 5.0 update for Pages (and also with 5.1 and 5.2), I sometimes don't manage to export my documents into .docx or .pdf files. I get a message telling: "an unknown error occured", and the file isn't converted. Could someone help me ?

Other than using the version that works, as VikingOS suggests, look for any distinguishing features or objects that may be common amongst the files that won't convert. Particularly Tables which seem to experience the most problems.
We have had a number of reports of this by other users and not been able to finger exactly what is the cause.
Pages 5.2 has quite a few problems with exporting and this is just another.
Peter

An error occurs when trying to exit from ALV report

Hi,
I have a report which imports and display in ALV data from an excel file. Unfortunately when I'm trying to exit I receive an error as I copied below.
Runtime Errors         MOVE_TO_LIT_NOTALLOWED_NODATA
Date and Time          17.10.2008 08:39:18
Short text
     Error at assignment: Overwritten protected field.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because it
      has
     come across a statement that unfortunately cannot be executed.
Error analysis
     A new value is to be assigned to the field "<L_BOX>", although this field is
     entirely or partly protected against changes.
     The following are protected against changes:
     - Character literals or numeric literals
     - Constants (CONSTANTS)
     - Parameters of the category IMPORTING REFERENCE for functions and
     methods
     - Untyped field symbols not yet assigned a field using ASSIGN
     - TABLES parameters if the actual parameter is protected against changes
     - USING reference parameters and CHANGING parameters for FORMs, if the
     actual parameter is protected against changes and
     - Accesses using field symbols if the field assigned using ASSIGN is
     protected (or partially protected, e.g. key components of an internal
     table with the type SORTED or HASHED TABLE) against changes
     - Accesses using references, if the field bound to the reference is
     protected (or partially protected) against changes
     - External write accesses to READ-ONLY attributes,
     - Content of a shared object area instance accessed using a shared lock
     (ATTACH_FOR_READ).
Trigger Location of Runtime Error
     Program                                 SAPLSLVC_FULLSCREEN
     Include                                 LSLVC_FULLSCREENF02
     Row                                     686
     Module type                             (FORM)
     Module Name                             MARKS_SAVE
How can I solve the problem ?
Thanks
Stefan

Hi ,
Please check the GUI status you are using for the ALV.
Looking at the code what i feel is that the error occurs when the user action is the code &SAL' or '&ALL'.
Please put a break point at the statement and see why is the error occurring
Regards,
Arun

An unknown error occurs when trying to use daq express VI's

When I try to open the daq express VI in labVIEW 8.2 (it doesn't matter which one), the program tries to "initialize" like its supposed to, but then it says that NI Assistant host encountered an error and needs to close, then gives a message saying "an unknown error has occurred." Also, Measurement and Automation doesn't work anymore, although it did before. I searched the forums and couldn't find anything like it. Does anyone know what's going on?

Hi Kodeeswaran,
What version of LabVIEW are you using? Are you seeing the same issues with Measurement and Automations Explorer?
When you reinstalled everything what order did you install all the software?
The issue might be caused by file permissions. Do you have Administrative rights on the computer? If not can you try replicating the issue while logged on as administrator. If you don't see the error while administrator you will need to change the file permissions for some necessary files:
Log onto the computer as an administrator
Browse to the C:\Program Files\National Instruments\MAX directory
Right-click the MAX folder and select Properties
Click the Security tab, and click the Add button
Type in the user name and click OK
Give the user Read & Execute, List Folder Contents, and Read permission
Click Apply and then OK
If you have several different users and want all users to use the DAQ Assistant, repeat the above steps but type everyone for the user name. The above steps are written for Windows XP with a NTFS file system. For previous Windows versions, the procedure will be very similar but may not be exactly the same.
Sappster

Unknown error occurred when trying to buy music from iTunes

Whenever I try to buy a song or album from iTunes it says an unknown error has occurred (-405054) and can't be completed.

I had this problem just recently.
I discovered that the problem was located here: ROOT / Users / Shared -- if you open that and the "adi" folder has a little red minus symbol in its corner, your permissions have somehow been lost. (If you can't see your root directory, open Finder Preferences and, under sidebar, check "Hard disks." That will make your root drive visible.)
If the "adi" folder has the red minus symbol, right-click the folder and select GET INFO.
Sharing & Permissions is probably set to "System: Read & Write | wheel: Read Only | everyone: No Access"
If so, your user account has no permissions, and that means iTunes can't use the folder properly.
To fix this, first unlock the folder using the padlock icon in the bottom-right corner of "get info." You will have to supply your admin password to do this.
Then click the little + sign in the bottom left corner to add a user, and select your user ID from the list of choices. Give yourself Read & Write permissions. (Alternatively, you could change the permissions of "everyone" to Read & Write; others have done that, but I was leery of doing it).
Re-lock the folder when you're done.
Hopefully that will solve it.

Unknown error occurred when trying to play the vid...

Hi
I cannot work this out... I can watch normal TV on vision and BBCIPlayer...but I get this error when I want to watch catch up on any of the other channels.... I also cannot watch ondemand nor free previews on Bt Vision..... Help me please.... I have reset the Hub...Reset the BT vision box...checked my BB speed.......
Im out of ideas....It was working fine a couple of days ago.

Hi andyseam,
Welcome to the forum Are you still getting this message when trying to watch catchup/VOD content?
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

ITunes tell me that an unknown error occurred when trying to connect to my iPod. What can I do to change this?

When I plug my iPod into he computer, iTunes then says it cannot connect to my iPod, it say an unknown has occurred.

Try turning off the Firewall and disabling anti virus software.
Helps to tell us if you are Mac or Windows ??
If you saw an error number > iTunes: Specific update-and-restore error messages and advanced troubleshooting

Got "Unknown error occured" when access to the Approval page in Project Server 2013

So long time find the solution, but cn't. Pls. help me

Hi,
Let's verify the following:
Whether the issue exists in all of the users? Done a test with a user with full control permission, compare the results.
What is the current SP\CU version installed on Server? deploy the latest CU, compare the results.
Whether the issue exists in other browsers, done a test in another browser, compare the results.
Whether all resources experiencing this error.
"An Unknown Error has occurred" is a generic error message. Please check ULS log for more detail information about the issue.
In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Ipod nano gets unknown error -48 when trying to restore

Hi All
My Ipod nano gets unknown error -48 when trying to restore and download the software update. Specifcally, when I connect my ipod, I get a message saying itunes cannot access the ipod and that I should restore it. I go the the ipod tab, hit the restore button and the download begins (approx 16mb). The download completes, and then I get this message :
There was a problem downloading the ipod software for the ipod "ipod". An unknown error occurred (-48).
Please help !!!!!

Even though not specifically listed, try the steps here:
http://support.apple.com/kb/TS1372
If you know someone with an XP windows machine try the reset utility on their computer.

An unknown error occurred when Dreamweaver tried to connect to this Contrib

Hello all,
I just started having a Dreamweaver problem that's perplexing me...
I have 2 machines, a G4 and a G5 both running Dreamweaver ( I have MX2004 and 8 on both machines, this problem effects both versions on the G5 only).
Everything was humming along just fine until the other day when suddenly I was receiving error messages on my G5 stating
"An unknown error occurred when Dreamweaver tried to connect to this Contribute site".
Then my local folder containing the website that I was working on would go gray (in Dreamweaver) and lose it's folder icon. It would still look like it was there, just no icon. When I would click on the drop down triangle it would state, " The local root folder, (and the folders name), does not exist. Please select a new local folder by clicking the Manage Sites button".
I then ran a couple of tests on the G4 and it connected fine, I was able to edit, upload/download, everything as usual. I then attempted to connect to the site with Transmit on the G5...no problem.
In the site definition I remembered that it may be set up to work with Contribute sites, but this was not the case, the box was unchecked.
I then had the idea to export the site key from the G4 and grab it onto the G5 and import it into Dreamweaver...I did this AND IT WORKED! Once...after that back to the 2 usual errors.
I found a work around for now...do my editing/site building in Dreamweaver, and upload with Transmit...this works fine...I've found that the errors only happen AFTER I've connected with the site(s). I've tried this with the other sites I maintain and it was the exact same thing.
Are there any similar experiences out there? This has really got me stumped... can't imagine what it is.
Any help would be greatly appreciated.
thanks
G5 Dual 2, G4 Dual 1.4 GHZ, iBook Graphite SE Mac OS X (10.4.4)

my firewall is off, everything worked up until a couple days ago when it randomly stopped working

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.

http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

On My Mac Pro Getting an unknown error message when trying to update apps

On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
Settings>Store>Apple ID - tap your ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sign in again -Settings>Store>Apple ID - sign in.
If that doesn't work either, reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Unknown Error occur when trying to get a visual report - Project 2013

Similar Messages

Maybe you are looking for