Unknown error occured while saving CS2

I'm using Windows Xp with Service pack 1.
I have Ilustrator CS2. When I save, an error message pops up saying "An unknown error has occured." Then after that if I try to change something in the illustration, it says "Not enough RAM memory," which makes no sense. The program has worked for me when I had a different download;I don't know where I got it from but it's gone and it was a Trial version--When I opened that one, I had to go to Windows > Color, Tools, etc. because it had no windows up. Anyway. I don't think it's a printer issue. And I have no idea how to delete or move the preferences/settings. When I click the CS2 folder, it doesn't say Settings ANYWHERE. I've seen people suggest that but no one says how to do it. They just expect you to know for some reason. This really gets my goat and it just doesn't make any sense.

Preferences > Plug Ins & Scratch Disks ( you can select up to 4 sources or drives starting with your startup drive ).  You found Web Settings, but what you want is Illustrator Preferences ( should be found in a source file titled Preferences on you C Drive ).  You may or may not have to delete the Preferences file which will automatically be rebuilt at default settings upon restart.  Your RAM requiremnts may be as low as 256mb, but that is just a starting put.  You need enough RAM to run your operating system and peripherals, as well as other apps you want open the same time you have Illustrator open.  Deleting the Illustrator Prefertences file may not be necessary in your case.  Setup the scratch disks first.

Similar Messages

  • Error occured while Saving The Project

    I have a project that is giving me a 'unknown error occurred while saving the project. Select 'Save As' from the file menu and save the project to a new location'.
    It would seem that maybe it's saying that it's out of room but I'm saving on a harddisk that has over 1T of space left. I tried to do as they said and create another folder and save in a new location but  it gives me the same error.
    Has anyone dealt with this.? I have a wedding project that I can't make any changes to. It was doing this before and after I updated to Adobe 4.2.
    Using:
    Adobe Premiere Cs4
    Matrox RXT2
    6 Rams of memory
    4T system
    Windows Vista 64 Bit
    Nividia GEForce 9600

    Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
    Good luck, and please report your findings,
    Hunt

  • I am trying to create a community addition, but just keep getting *Error occurred while saving your data.

    I am trying to create a community addition, but just keep getting   *Error occurred while saving your data.
    Trying to add the following community addtion for:     http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
    In the above website do NOT copy the command, you have to type it in.  Webpage Error.
    You can use both    dsquery server –hasfsmo schema    and    dsquery server -forest –hasfsmo schema
    The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.

    Hi John,
    You might have better luck posting this in the library feedback forum here:
    http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
    It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

  • SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

    Hi All,
    I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
    in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
    Any clue why it is happening.
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi All,
    Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing. 
    Once I cleared the space, report started working and above error was not displaying. 
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

    When I run the report on production I got the following error message:
    Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
    request on the server. The status code returned from the server was: 12019
    It hasn’t happen on Dev and Test before.                           
    I googled, The error is described as:
    12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
    The requested operation cannot be carried out because the
    handle supplied is not in the correct state.
    But I cannot find the solution for that. 
    Has it happend to you before? How to solve that?      

    Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
    Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
    code returned from the server was: 12019

  • Error occurred while saving document in Web Analysis Studio

    We have encountered an issue when we tried to save a new report in Web Analysis. An error message box will prompt up displaying "Error occurred while saving document." (Please refer to the attached screenshots). Clicking the details button gives no response.
    Originally we encountered this whilst creating a report with an SQL spreadsheet (JDBC connection tested successfully), which failed to save. Proceeding to test this saving a blank report also gave the same error message.
    The report shows up in the Oracle view, however also produces an error when trying to open it. "Unable to perform request
    Undefined exception encountered. Recommended Action: Contact your corporate technical support." (Please refer to the attached screenshots)
    Web Analysis version 11.1.2.3.000.1175
    Please advise on how to handle this case

    Hi Soumya,
    Thanks for your reply. I am already using the admin account which is given administrator provisioning under Reporting & Analysis. I have not had issues in the past of saving documents to the server location (e.g. with FR studio). Any ideas as to what else could cause this error? Thanks!

  • Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

    sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

    Hi SP,
    Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
    http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
    http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
    http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
    If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • VLD-0917: An unknown error occured while generating FACT

    I'm trying to move my OWB repository from machine_1 to machine_2 this is what I did:
    1. Export of the OWB metadata for the entire project. (machine_1)
    2. Import of the OWB project in machine_2, import is successfull.
    3. Configure locations for the source/target schemas (double, triple checked)
    4. deploy the objects...
    Here comes the problem: all tables referencing shared tables from other locations (i.e. modules), fail to generate with error
    VLD-0917: An unknown error occured while generating FACT.
    An unknown error occurred while generating FACT.
    Error details: java.lang.NullPointerException.
    following is the Design Center client log for the error:
    **** Exception when generating ****
    java.lang.NullPointerException
    at oracle.wh.repos.sdk.environment.WBEnvironmentHelper.getDbLinkName(WBEnvironmentHelper.java:775)
    at oracle.wh.service.impl.generation.common.WBGenerationUtils.isSameInstance(WBGenerationUtils.java:355)
    at oracle.wh.service.impl.generation.ddl.TableGenerator.getMapSchemaName(TableGenerator.java:914)
    at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKey(TableGenerator.java:1047)
    at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKeys(TableGenerator.java:894)
    at oracle.wh.service.impl.generation.ddl.TableGenerator.generatePhysical(TableGenerator.java:612)
    at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:463)
    at oracle.wh.service.impl.generation.ddl.TableGenerator.generate(TableGenerator.java:145)
    at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:306)
    at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generateAUX(DDLGeneratorManager.java:186)
    at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generate(DDLGeneratorManager.java:101)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:423)
    at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
    at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
    Even more, this happens when I create a new FACT and a new shared table (located in another location) so it isn't the repository metadata being imported. If I remove the constrainsts referencing tables in other schemas then deployment is successfull.
    Repository resides in an oracle database 10g r2 and OWB is 10.2.0.3 running on a cluster machine with AIX 5...
    Any ideas how to solve this or a possible workaround?
    Thanks,
    German

    Hi,
    I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
    Any idea what might be happening here?
    Best Regards,
    --oswaldo.
    [osantos]

  • VLD-0917 - unknown error occured while generating (OWB10R2)

    I have two cubes which I'm trying to drop via the control center, so that I might add a new version with a new dimension. However, when I try deploying the drop, I get the "VLD-0917 - unknown error occured while generating <cubename>" together with:
    An unknown error occurred while generating <cubename>. Error details: java.lang.NullPointerException.
    Any ideas?
    ed

    Hi,
    I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
    Any idea what might be happening here?
    Best Regards,
    --oswaldo.
    [osantos]

  • Error occured while saving the user account information

    I'm trying to install LiveCycle ES 2 with PDF Generator on a Windows 2008 server wtih SQL Server 2005.  When I run the configuration manager I get an error in the step where you add the administrator user credentials for generator.  The error I'm receiving is ALC-PDG-080-032-Error occured while saving the user account information.  Has anyone seen this issue before?  Any ideas on what the problem may be?

    Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
    Good luck, and please report your findings,
    Hunt

  • Error occured while saving ume properties

    Hi All,
    We have installed SAP ERP 6.0 SR3 central instance(ABAP+JAVA)
    I logged into Enterprise Portal using J2EE_ADMIN user.
    I am trying to change properties in System Administration --> System configuration --> UME Configuration --> ABAP System.
    I changed properties then i clicked on 'Saved All changes' button. I am getting following error.
    "An error occured while saving UME Properties. contact your system administrator'
    I want solution to move forward.
    Regards,
    Phanikumar.

    Hi Phanikumar.
    Please check whether J2EE_ADMIN is having super administrator role in portal or not.
    If you have assigned system administration role directly then it might be the case.
    You can try with config tool if still you are getting the problem in the portal
    Hope it helps
    Regards
    Arun

  • Concurrency Visualizer Extension (VS2013): "An unknown error occurred while trying to start the collection process."

    Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
    I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
    visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
    "An unknown error occurred while trying to start the collection process."
    I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.

    Hi,
    This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
    and Team Foundation Server.
    You have problems when using Concurrency Visualizer Extension, please ask in
    the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
    Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • CRS 5 Backups fail with this error: Unknown error occured while connecting to the host

    Dear All,
    We have backup issue with  UCCX 5.0(2)SR03_Build317, while trying to take  backup giving following error "Unknown error occurred while connecting to the host".
    I have found the solution in the Cisco and tried all the suggestion, still not working and same error observed. Due to backup issue we unable to do any changes on the CRS, when we try to create new agents, those agents are not reflecting in the CRS.
    Also I have observed bellow error , when try to re-sync the JTAPI,
    Error while handling the input   request.
    Top of Form
    Config Changes are not allowed during 'Backup' operation, which   was started by 'Scheduler' at 'Fri Jun 08 18:00:03 GMT+08:00 2012 '. Please   try again after 'Backup' is complete.
    Bottom of Form
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00809a752c.shtml
    Solution
    Complete these steps in order to resolve this issue:
    •1.      Access the UCCX server and navigate to Start > Run, and type CET.
    •2.      When the warning message appears, click NO.
    •3.      Choose com.cisco.crs.cluster.config.ArchiveAdminConfig.
    •4.      On the right side, double-click the record ID.
    •5.      Click the com.cisco.crs.cluster.config.ArchiveAdminConfig tab, and clear the password under Backup Storage.
    •6.      Click Apply.
    •7.      Navigate to Appadmin > Tools > Backup and Restore.
    •8.      Under Backup Storage Location, type the new password, and click Update.
    After you complete these steps, you can run the backup. If the backup fails, restart the server, and try the backup again. If the backup still fails, you can navigate to CET, clear all the fields, and then type the new information for the storage location.
    Please help me with your suggestions.
    Thanks & Regards,
    Naveen .S

    Please any one help me on this issue..

Maybe you are looking for