Unknown error on Render - Pr CS6.0.2

Ok I have cut, added efx, graded, and mixed this.
I have also rendered it and exported a .mov.
So when i reopen the project and added a lower 3rd it says it cant render.
My lower 3rd was generated in Pr cs6, then i tried importing a PS file. Niether would allow render.
No render for filter adjustments including the native stuff like luma curve or brightness/contrast.
When you see this screen shot you would be right if you are gussing that evrything accept that little red spot is already rendered.

I trashed prefs and its opening slower. It still has the same error on render.
I am gonna jump back to cs5 cause i have had quite a few problems with cs6.
Hopefully i can edit in Pr cs5 and get effects in Ae cs6 for future projects.
It could very well the drive its a 5year old enterprise hitachi. It seems to take everything else well and i rebuild the drive with disk warrior once or twice every year. I may just make the back up drive the main and replace the backup.
Anyway, i am gonna open this in cs5. I wonder if there is a way of using an xml to reconstruct the SEQ in cs5, with all the DLink stuff in it also.

Similar Messages

Error compiling movie: Unknown Error during render

Over the past day or so, I've been having some issues rendering out my premiere pro sequence. It is `1920X1080 sequence with the DSLR sequence settings. I'm attaching an image below to give you an idea of my sequence settings. Everytime I select: render effects in to out, immediately receive the error message a video preview box shows up saying "error compiling movie: unknown error" I literallly have tried everything- first I trashed my preferences, changed my scratch disks, but neither of these did the trick. I also created a new copied sequence where I tried isolating files to see if any one file in particular was being problematic, and the same error message showed up. A lot of people on this forum have noted that the problem primarily lies with images, but I know it's not that because I've tried removing all of my images and just dealing with footage. I've basically tried having a sequence with every single combination of footage and nothing has worked.

Error Compiling Movie
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172

Unknown Error When Saving with CS6

I am receiving an unknown error when trying to save my document. I have tried to take off the PDF convertable part, and tried saving it legacy style, but it's still not working. I have a doc open I need to save and won't be able to shut my computer down until I fix this... What could be the issue? Is there a fix for it?
Thank you!!!!!!
Henri

After nearly ripping my eyeballs out and chucking my laptop out the window, I finally fixed the problem!
For some reason I didn't have a CMaps folder in my Adobe - Common Files - Font folder:
C:\Program Files\Common Files\Adobe\Fonts\Reqrd\CMaps
So I made the "CMaps" folder and copied and pasted the files "Identity-H" and "Identity-V" from an "Adobe Reader" CMap folder, and now I can save text in an *.ai file with PDF Compatibility checked.
It's pretty strange Illustrator was working for 2 years without this folder, and now all the sudden it needed it. Also, this is a very obscure fix.
Hopefully the programmers at Adobe have fixed these bugs in newer versions.

Premiere CS6 Unknown Error in Rendering & Export

Hello,
this is an ongoing problem that persisted on any version of Adobe Premiere Pro I worked with, including CS5,5.5 and the latest 6.
I am stuck with a feature film on a CS6 Timeline, getting an Unkown Error during rendering and Media Encoder exports.
I get the same error if I attampt to create a new trimmed project with Project Manager.
I am aware that this is one of the most common problems in this forum, and before opening a discussion I tried everithing I could:
- Replace the media at the point of the error/crash (even though the error seems to happen randomly in dirrerent portions of the timeline)
- Disable MPE
- Reset Secutity and permission on files
- change hard drive
- Create a new sequence
- Disable second monitor
I have to bring an export of my film and a new trimmed project by tomorrow to a color house and I am currently stuck.
I managed to render the entire timeline before exporting. Redering would stop randomly, generating the same "Unkown Error in Copiling Movie".
Although I rendered the entire timeline by creating different IN-OUT with the work area selection.
After a long and tetious rendering process I managed to have the entire timeline "green" and ready to go.
I figured that this way the exporting process would have been successful. Unfortunatelly not.
I switched to Premiere Pro for its ability to edit R3D media, but what's the point if we cannot export the project? And neither trimm it to a file that I can give to a colorist?
Here some details of my workstation and source media:
- MacPro 12cores 64Gb ram
- Internal 6Tb raid for source media
- 4Tb Dulce Scratch drive
- Editing 4K and 5K R3D Media natively
If anyone found a solution to this problem, please help.
Thanks

Hi Neonhigh,
If you are going to color correction, why do you need an output? Aren't they color correcting the native files?
I need an output as reference for the VFX department, I need an output for the sound designer, I need an output for the producer, I need an output for myself and to send to my girlfriend. The question I should ask you is, why shouldn't I need an output?
What's wrong by exporting my timeline in a format that is not r3d files for reference and production management?
I was talking about color correction only, as they usually only need the native files. Of course, an output would be necessary for all the other things you mentioned. Nothing wrong with that.
Neonhigh wrote:
If you need an output for some reason, why are you rendering at all?
As I explained I simply rendered because the software was having several random "Unkown" problems in exporting. I though rendering and exporting a file matching the timeline settings would have solved those annoying Unkown Errors, giving me at list an export based on the render sttings.
Problem is that PPro CS6 fails also to render the timeline, and I needed to break the process in 30-40 segments in order to achieve a complete rendering.
Rendering in Premiere Pro is primarily for playback, and not necessary for output. In fact, it's a waste of time in most cases. Render files are typically not used for an output unless you explicitly want to do so. Typically they are lower resolution "preview" files that you don't want to use.
Regardless, you should have no trouble rendering sections of your Timeline. Are you updated to Premiere Pro CS6 (6.0.2)?
Can you try an export without rendering?
I wish PPro CS6 was reliable enough to allow me to simply export.
I still did not solve the problem. Several people from the redusers forum are trying to help me as and they all ran into the same issue.
Currently this are the issues:
- PPro does not render the entire timeline
I'm trying a test project right now and so far it is rendering OK. Can you point me to the reduser forum post where people were giving you assistance?
- does not output the entire timeline (if not chopping it in 12-15 parts)
I'll test that, as well. You should not have to segment the sequence in order to get an export.
- Project Manager does not trim the project to pass it to over post prod facilities.
Sorry, the Project Manager will not consolidate every media type. It will copy, however. This would be a feature request or bug report: http://www.adobe.com/go/wish
Beside questioning me with why I want to render or export my project,
Not questioning your capabilities or talents, I just wanted to know what you wanted to do, and why. Typically, most people don't render as much in Premiere Pro as they do in other NLEs and I was wondering why you needed an export to go to color correction. That's all.
Many users in this forum (as well as on the entire internet) experienced th same Unkown Problem:
http://forums.adobe.com/message/4661398
There could be many different variables which can cause that error. The troubleshooting doc you found addresses many of those. I will add the "Unknown Error" warning to the document.
There is no "single fix" for this problem, I'm afraid, and these are our opinions and solutions on the matter.
A legitimate gripe would be that the error is too generic, and I would agree with you there. The error should contain more details about how to remedy your issue. Please make a feature request for more descriptive error dialog boxes: http://www.adobe.com/go/wish
I will also mention it to the product team.
I understand that, being an "Unkown Errror" Adobe does not have a iniversal fix, but please don't ask me why I want to output my timeline.
Again, I was only asking in the context of color correction. Of course, you want an output for various reasons.
I've written up your bad experience in my case notes and I'll do my best to get you some better answers to your questions. You definitely should not have to jump through hoops to render or export a .R3D sequence.
Neonhigh wrote:
Here is a temporary fix for who runs into this problem:
Yesterday, after trying everything I could think of I simply exported an XML, opened it in Final Cut Pro and exported all the files and formats that I needed. No Unknown Errors.
Thanks for the workaround. I'll add it to my notes.

Can't EXPORT or RENDER in PREM CC!! "Error compiling movie. Unknown Error."

I am using PMW200 MXF files alongside 5D MKiii files - I finished the edit and went to render/export and it won't let me do either! I can't get the edit out of the software and I have a deadline in an hour.
I only bought the software today (have been using the trial version and I am just coming from FCP 7 - I get this error:
"Error compiling movie. Unknown Error."

Hello Bill
The Adobe KB Article (http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering -or.html ) does not answer the question asked, because the end of the error message is "Unknown error" which is not listed in this article.
I often encouter this error which is a RANDOM error which occurs only with pictures (4256x2832 .jpg or more when I use panoramic pictures with more than 50 MPx) but never with video (1920x1080 HD .m2ts) from my camcorder. The only way I found to do a complete render is :
- save and close the project without editing it,
- close Adobe Premiere Pro (CS6 or CC, same error),
- reopen Premiere Pro and reload the project,
- resume the render.
If I render WITHOUT Mercury Playback Engine : all is perfect, no error but the render needs very much more time.
My own conclusion : this render crash might be due to VRAM oveflooded during render with Mercury Playback Engine (this might be checked and monitored with the freeware GPU-Z).
My GPU is GTX 570 with 1280 MB VRAM and the render are only full HD (H.264 1920x1080i).
If you have a solution except remove the GPU and purchase a GTX 770 OC 4 GB VRAM, I am waiting for it.
My actual system :
- CPU Intel core i7 970 (6 cores, overeclocked to 3,9 GHz),
- MoBo : Intel DX58SO2,
- RAM : 24 GB,
- GPU GTX570 with VRAM 1280MB (Nvidia driver allways up-to-date),
- HDD : RAID 10 with four WD 1002FAEX (7200 tpm, 64 MB cache),
- OS W7 64 SP1, 64 bits (allways updated)
Regards
Jacques

"Unknown Error" all the time, every time on render of project, any codec

Trying to render a feature length documentary for a film festival (ie.. I don't have time for this). The project timeline runs 1 hour and 20 minutes. If I try and export or queue the timeline in media encoder to h.264, QuickTime or Select "Match Sequence Settings" as my output format, the media encoder fails to render with the very informative "UNKNOW ERROR" every time at random point in the render procedure. When rendering it as an mpeg once, I am able to see one place where it crashed. It is a place in the timeline where the are no transition, not cuts, no overlays, absolutely nothing out of the ordinary. Yet, it crashed there this time. Next time, it will crash elsewhere.
I am trying to render the timeline on segment at a time. So far, each smaller segment of 20 minute blocks seems to be rending just fine and goes past the points where other renders failed. Looks like Media Encoder can't handle large projects.
Here's all the requested information for a complete diagnosis of the problem.
Error given to me by Media Encoder : "Unknown Error" --that's it. The time rendered varies between 43 minutes and 3 hours.
- Encoding Time: 00:54:04
05/03/2015 05:59:03 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
Adobe Premiere Pro CC 8.1 Caravan
2014.2 Release
8.2.0 (65) Build
OS X 10.10.3 (14D136)
iMac (27-inch, Mid 2011)
3.4 GHz Intel Core i7
24 GB 1333 MHz DDR3
AMD Radeon HD 6970M 2048 MB
I'm right handed, my favorite color is blue, the computer is on the Eastern TimeZone
I need this timeline rendered and I'm not interested becoming a forensic-level technical authority on Premiere to get it. This problem has come and gone now for months and is intolerable. I pay for software and I expect it to work, and at least give me something more useful than "UNKNOW ERROR." There is no such thing. As a former developer, I can say with authority that simply dumping to a message that says this is lazy and sloppy programming. Buffer underruns, stack overflows..whatever. Everything is caused by something. I can't begin to diagnose this problem unless Adobe provides software error handing that gives me some idea of what happens. Where did it happen in the timeline? What routine/subroutine gave the error? Was it a codec error? Come on....these things are not unknowable.
Adobe, PLEASE stop coming out with new features when you can't make your existing pay by the month software reliable! Maybe FCPX is worth another look.

UPDATE:
tried rending the entire project as Quicktime ProRes 422 (since that is what clips were recorded in originally anyway) and Media Encoder gto 89% complete....and the entire application CRASHED. WHO-HOO! Way to go, Adobe!!!!!
Here's part of the crash report if it means anything. Maybe I'll try it again and see if anything changes! Can't get any worse.
Process:               Adobe Media Encoder CC 2014 [864]
Path:                  /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
Identifier:            com.adobe.dynamiclinkmanager.application
Version:               8.2.0.54 (8.2.0)
Code Type:             X86-64 (Native)
Parent Process:        dynamiclinkmanager [826]
Responsible:           dynamiclinkmanager [826]
User ID:               502
Date/Time:             2015-05-03 20:05:05.829 -0400
OS Version:            Mac OS X 10.10.3 (14D136)
Report Version:        11
Anonymous UUID:        5CCC287C-7B70-E4F9-D0E8-4180FB0681CC
Sleep/Wake UUID:       0ED73954-6C5A-4CCE-B807-974B71171E95
Time Awake Since Boot: 33000 seconds
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_CRASH (SIGBUS)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib         0x00007fff94c8d4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff94c8c64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff94955eb4 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff9495537b __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff94954bd8 CFRunLoopRunSpecific + 296
5   com.apple.HIToolbox           0x00007fff8ab7256f RunCurrentEventLoopInMode + 235
6   com.apple.HIToolbox           0x00007fff8ab722ea ReceiveNextEventCommon + 431
7   com.apple.HIToolbox           0x00007fff8ab7212b _BlockUntilNextEventMatchingListInModeWithFilter + 71
8   com.apple.AppKit               0x00007fff8c8fe9bb _DPSNextEvent + 978
9   com.apple.AppKit               0x00007fff8c8fdf68 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 346
10 com.apple.AppKit               0x00007fff8c8f3bf3 -[NSApplication run] + 594
11 com.adobe.exo.framework       0x00000001057f3a88 exo::app::OS_AppBase::RunEventLoop() + 56
12 com.adobe.ame.application     0x00000001000195c1 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 11809
13 com.adobe.ame.application     0x0000000100049ba8 main + 440
14 com.adobe.ame.application     0x0000000100003e34 start + 52

Illustrator CS6 - An unknown error has occured

When saving a file in illustrator CS6 the error comes up as "An unknown error has occured".
I can not save my files at all, export them as any other filetype or print them to PDF.
I have figured out it is any element with transparancy causing the issue... if I delete or flatten the items, I can save..
Any Ideas hoe to rectify this as it is stuffing everything up for me...

I've been having the same problem when I save a ANY of my AI file as PDF with Printer Marls (Trim Marks etc). No transparencies, no effects, just pure type (tried outlined and live) and flat shapes. Not sure what to do, I tried to trash the settings folder, reboot computer and nothing

Opening CS5 Files in CS6 - Get "Unknown Error has Occurred"

I recently upgraded to CS6 and cannot open any past files in CS6 from CS5. Everytime I try I Get "Unknown Error has Occurred"
Any help on this?

Yes, can open in CS5 just fine. Workin on Macs: Desktop = OSX 10.8.3 (Has CS6) and a Macbook Pro = 10.8.6 (Has CS5) No files will open on the new iMac.

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?

What happens if you choose this option?

When I saved an Illustrator CS6 file to EPS format, I got "could not complete the requested operation. unknown error."

When I saved an Illustrator CS6 file to EPS format, I got "could not complete the requested operation. unknown error."
Google it and find some temp fix. run the illustrator by using "Run as admin" mode and fix the problem, but when use run as, can't see all the original user's mapping drives.
So still need it fixed.

It is win 7 64 bit system and same error on Illustrator x86 and x64.

Illustrator (CS6) - unable to save, unknown error

We've been experiencing an issue with saving illustrator files (as .ai). The error message is "unknown error occurred" when attempting to save. Things tried already:
delete preferences file
uninstall/re-install CS6
standardize all fonts to arial
save in another location (desktop, network)
save as .eps
But still same.
This happens when copying components of one ai file to another and trying to save it. Found that removing one tiny piece from a drawing allows the save...so fine we can work around, but it would be really helpful to know WHY this is happening, because it seems likely to happen again. There is no text in that piece, just lines and shading.
Any advice is appreciated.

Well, that would require for you to provide the file so people can dabble with it or at least extensively document your settings with screenshots on top of screenshots. In any case, ask such specific questions in the AI forum and also provide system info along with the details I described in whatever form.
Mylenium

When I am trying to export or render Mxf files I get an unknown error. Help!

Hi everyone,
When I am done editing my videos I want to render them. But when I do and the videos are MXF files, I get an unknown error.
The same when I try to export.
I work on a windows laptop and have Premiere Pro CS 6.
Is there someone who can help me, please?

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too

Premiere cs6 unknown error during the project manager operation

It appears this is an ongoing issue that needs to be addressed by Adobe.
I remember back in CS3 this was an issue and it still appears to be unresolved. I'm using a Windows 7, HP Z workstation with Quadro FX graphics card, plenty of Ram, with an efficient RAID system. I need to provide a complete project (with files folder & assets in a central folder - maybe even trimmed assets) to my clients. The Project Manager create Trimmed Project continually fails, as well as Collect files and Copy to New Location. Following the Adobe instructions, no screensaver, turn off Premiere Autosave, don't use other programs that will impact machine usage - the results are still the same - unknown error - PLEASE ADDRESS THIS ISSUE ADOBE ! ! ! ! So my question is, When will Adobe address this issue?

This forum is mostly other users, with a "few" Adobe employees
You may need to contact Adobe directly... if some other user does not have a solution
Adobe contact information - http://helpx.adobe.com/contact.html

Premier CS6 - Error Compiling Movie, Unknown Error

Hello all,
I am cutting Red 4k feature movie right now -- and everytime I try to export for preview for my director, it crashes in random time - 2sec, 4,sec, 22 sec, 13sec, all over the place.
And it says Error Compiling MOvie, Unknown Error.
I am getting so annoyed now - because there is no answer for this! Can anybody please help?
My computer is
Model Name:
Mac Pro
Model Identifier:
MacPro3,1
Processor Name:
Quad-Core Intel Xeon
Processor Speed:
3.2 GHz
Number Of Processors:
2
Total Number Of Cores:
8
L2 Cache (per processor):
12 MB
Memory:
12 GB
Bus Speed:
1.6 GHz
And I'm cutting Red 4k files.
Thank you in advance!

What are you exporting to?

CS6 64bit "the operation connect complete because of an unknown error." [cant]

When I run AI 16.2 x64bit as a normal user and try to create a new document I get the following error message:
"the operation connect complete because of an unknown error." [cant]
However, if I run as administrator i have no issues... what is the problem?

it's actually my user account which has administrator level access rights to the system

Unknown error on Render - Pr CS6.0.2

Similar Messages

Maybe you are looking for