Unknown error. Slow motion and Panorama photo

Hello guys.
I just bought a Z2.
I was trying out the phone today and was trying most of the camera features. 
Everything works fine exept when i try to film Slow Motion (dont remember the feature) and when i started filming, i got the message: "Unknown Error" the second i pushed the record button.
And when i try to use panorama it worked for 3 seconds and then it gave me half a panorama shot. After that i tried again and now i get the message: "Turn slower" or something like that. That i get after 2-3 sec. Then i try again and again. And now i get the message "Turn Slower" the second i press the photo button.
So something is wrong here.
Is this something everyone has a problem with? Do we get an update / Fix for this soon?
Is there something i can do to fix it?
Just one more question.
I got a smart band with my Z2, and when i tried to connect it to the phone, i got the message: "Chip is empty".
What does that mean? I got that message about 20-30 times before i suddenly could connect to it. And then the band disconnects alot, and when i try to connect it again, i get the same message and have to try a few times before it works again.
Have a great day people.
Solved!
Go to Solution.

That seems odd, try this
settings > apps > all > camera > clear data > restart your phone > check again 
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared.  I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music li

    The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared.  I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music library.  The library does not show up even when my iPad is connected to my PC.  My entire library is now held on my iPad and I wish to have it in iTunes so I can sync my iPhone to it as well.  Help?

    Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

  • My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error(1015)

    Hey guys. My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error has occured(1015). I have no clue what to do and all and any help would be amazing.

    See Here
    https://discussions.apple.com/message/15290457#15290457
    From the More Like This  on the right...

  • I have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?

    i have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?

    The internet is the internet. if its not working then its something to do with your not allowing cookies from apple's site or they are having issues.

  • HT201210 iphone 4s stopped in middle of update (via wireless).  apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id

    iphone 4s stopped in middle of update (via wireless).  apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id and usb picture are frozen on screen. Anyonw know what to do? 

    Hello Maxayla,
    It sounds like you are getting error code 1 when you were attempting a restore. I would use these troubleshooting steps from the following article which mentions that error code:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#1
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

    I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
    please advise me,
    best regards,
    Ahmed

    try to edit your host file ang delete any line that contain gs.apple.com

  • My imported avi file plays in slow motion and staggers. what do i need to do to correct ?

    My imported avi file plays in slow motion and staggers. How do i fix this ? I am newbie, just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second

    You can update the latest drivers for Nvidia Card.
    Try to run composition panel at a lower resolution .
    Refer to this link .

  • How to best achieve slow motion and fast motion

    Hi - I am new to the forum and a basic user of Premiere Pro CS5. I am working on a project shot at 24 fps, and would like to do slow and fast motion.
    From what i understand there are 2-3 different ways to do this in Premiere - choosing speed/duration of the clip from timeline, or choosing time remapping form effects panel ot using rate stretch tool. Wondering how do these compare and which is better - any pointers for this will be great help. Also is slow motion and fast motion better done in After Effects than Premiere. Or any recommended plugins that would work on cs5 and cs5.5. Thanks.

    The main difference between using time-remapping and just using time-stretching is that time-remapping allows you to change the speed quite flexibly at different times in the same clip, whereas stretching just changes the rate for the whole clip.
    See this page:
    "Change speed and duration for one or more clips"
    > Also is slow motion and fast motion better done in After Effects than Premiere.
    After Effects has far more control, especially with regard to how new image information is created between the original frames when you change speed and require frame interpolation (frame blending). Pixel Motion and Timewarp use a very advanced motion vector method (based on the Foundry's Kronos software) for doing this.
    See "Time-stretching and time-remapping".

  • Slow motion and speedup during a single clip

    Is there a way to take a single clip, and slow down portions of the clip, while speeding up other portions of the clip.
    Is there a way to adjust playback speed using keyframes I guess is my basic question, so the start of the clip is slow motion, then the middle is played back at an accelerated or normal rate, then the end of the clip becomes slow motion again.
    -Roger

    Yes, is the short answer. Using the time remapping feature in the "effects" panel (top center of the screen, second tab from the left) you can set certain portions of the clip to play back at normal speed, then slow it down in certain sections, and then speed it back up. You can also cut the clip using the razor tool (in the tools panel at bottom right of the screen) and just reduce the speed of that section of the clip. The downside to using the time remapping (if my memory serves me - don't take my word for it) is that you lose audio, but the transitions from normal to slow-mo and back are much smoother. Using the razor tool, you simply place the timeline indicator where you would like to begin the slow motion segment, then cut the clip with the razor tool, the repeat the process where you want the slow-mo section to end. Then, select the section that you want to play back in slow motion, and reduce the speed. This is the method that was used before the time remapping feature was available. The transitions are not at smooth, but you can keep audio for the sections where the speed isn't modified. Just be sure to select the "ripple edit" check box when you modify the speed/duration setting of the clip (right click the video clip to get the speed/duration setting dialog box).

  • Slow motion and other effects are grayed out

    Just switched from iMovie 9 to 11, and can't take advantage of the slow motion, instant replay and other effects, because they are all grayed out in the Clip menu. Why? I do not see the "convert entire clip" option referred to in the help file. What is wrong?

    Yes, that is it. The trailers are pretty scripted.
    If you want to add an effect to a trailer, first complete the trailer.
    Then, in the Project Library List view, right click on the trailer name, and select DUPLICATE. (This will give you a copy of the trailer in case you want to edit it some more.)
    Then, with the trailer name still selected, click FILE/CONVERT TO PROJECT.
    This will turn your trailer into a normal project, and you can use any of the capabilities of iMovie, including the slow motion and instant replay effects.

  • Slow motion and Normal speed?

    Can I take video shot 720p at 60 fps and use both slow motion and  normal speeds in the same video??

    Time Stretch is where I would start. If you need to apply that Effect to only part of a Clip, just use the Razor/Scissors Tool, to Cut that Clip, into the segments, where you wish to apply Time Stretch.
    Posterize Time can be effective, as well, but from my reading of your needs, I think that Time Stretch (Rt-click the Clip, or Clip segment and apply).
    Good luck,
    Hunt

  • Slow motion and reminder setting

    Guys,
    Is there a function for slow motion and for setting a reminder for a program rather than recording?
    Cheers
    AW

    No slow motion that I've found.
    Reminder function see here.

  • It keeps saying that -69 an unknown error keeps accruing and it won't put these two songs on my iPod

    It keeps saying that -69 an unknown error keeps accruing and it won't put these two songs on my iPod

    there might be two of the same song, or they might be closely related in some way, (maybe the title..) that it is confusing the ipod. YOu might have not enough space on your ipod for the songs.

  • I have an unknown error (-81) when connecting iPod Photo and Nano

    This error keeps coming up when connecting iPods to iTunes and no photos can be downloaded.
    I have downloaded the all the latest iTune and iPod updates

    Hello penel2907,
    This could be due to a hardware issue. You may try using a different USB port on your computer.
    Check for hardware issues
    Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Allen

  • The iPod cannot be synced. An unknown error has occured (-50). PHOTOS ONLY.

    Hi there. I have searched with no success, to solve this problem: I have a 1st gen. Touch and only recently, I get the following message when attempting to sync with my mac: The iPod "customer's pod" cannot be synced. An unknown error has occurred (-50).
    This only happens when I have selected photos to be synced. This never happened before. If I de-select the photos, there are no problems.
    I am running iTunes 8.1 and version 2.2.1 iPod software. I have done a reboot, restarted and so far nothing has worked. I have searched this forum and have found assistance for people running a PC but so far, can't find anything that has worked for this situation. If this has been answered previously, my apologies. I appreciate anyone who can help out and/or point me in the right direction.
    Rebecca

    Thank you! I deleted the ipod photo cache and it worked. (apologies for not writing sooner... my ibook crashed and I just got a new mac and synced up).
    Thanks so much - very appreciated.
    For anyone else trying to delete the photo cache from an iPhoto '08 album, visit this link: http://support.apple.com/kb/TS1314

Maybe you are looking for