Unknown error when attempting to connect to my speakers via airtunes

It was working fine yesterday morning and just like that it ceased to function correctly. The airport express and the airport extreme base station are both seemingly functional. Any ideas?

Hello,
I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
Chris Mayer
The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

Similar Messages

  • APE &  iTunes "Unknown Error" when trying to connect to remote speakers.

    This is a new setup using a pre-existing windows PC and Netgrear router.
    The APE appears to be set-up correctly per the instructions to set up as a client. It appears in iTunes and I can selet it. When I do, the progress bar reads "connectinfg to.." for about 30 seconds, then: " An error occurred when connecting ..." ending with "An unknown error occurred (-15000)"
    The log in the AirPort Utility reads like this:
    AirTunes stream from 192.168.1.11 started.
    AirTunes time sync receive error:-6722
    AirTunes too many time sync negotiate failures: 64/0/0/64
    AirTunes stream from 192/168.1.11 stopped
    Any ideas?
    Bob

    edit: try again
    see if this article helps.

  • I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

    I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
    Please Help

    I received this email from Apple and this corrected the problem for me...  I only had to reset the iTunes cache
    1) Open iTunes
    2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
    3) In the Preferences menu, click the Advanced tab
    4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

  • There was an error when attempting to connect to the Windows Live Calendar service.

    I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message  
    There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
    Can anyone help me, no sense sending me an email, I cannot get into my email.
    Lucienne1

    Hi,
    Try installing Windows 2012 Live Essentials here.
    You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
    Are you using an Internet Service Provider Email  account or a cloud based (IMAP) Email account?
    Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
    Jaco
    ****I am not an HP employee****
    Errare humanum est.

  • "Unknown Error" when attempting to publish through Muse

    I recently updated my log in information to better organize log in credentials that I currently have deployed. I edited just the basic email and password as well as adding another one of my alternate email addresses. When I did that the ability to manage the site I have published through muse disappeared through the website interface. I also am receiving an "Unknown Error" when attempting to publish from the Muse application itself. Log in credentials are definitely updated and correct, just not sure where the others went.
    Any help in the right direction is appreciated!

    Hello,
    I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
    I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
    Chris Mayer
    The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

  • Caused error -3256 when attempting to connect to external speakers.

    I'm trying to connect to my Airport express using a PC running Windows XP home Edition SP 3 with iTunes 8.0.2 and getting the following error
    caused error -3256 when attempting to connect to external speakers.
    I've searched on teh internet and everything seems to relate to the Mac OS.
    Anyone running XP had similar issues?
    My AirportExpress is running FM 6.3
    Thanks
    Marcus

    After reading this discussion thread, I've seemed to have solved the problem for myself. I'm using the Trend Micro PC-Cillin Firewall. I disabled it and the airtunes worked. So, I went into the firewall settings. There's the ability to edit the profile and add to an exceptions list. You select the executable program, select incoming or outgoing, I accepted the other default settings and it worked.

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • "Unknown error" when attempting to sign in on Itunes.

    Hi there
    For the past hour i've been trying to log onto itunes with my Apple ID, which has been working fine for months, except every attempt I do ends up with "Unknown error" in red letters in the middle of the pop-up box used to enter your ID and password. If I try a second time it tells me I've entered my password incorrect too many times and that I need to change it for security purposes.
    I know i'm not using the wrong password since i've had it reset moments ago and still have the same problem. I've managed to log onto Apple's website fine with the password, so there's no room for doubt that i'm entering my ID and password incorrectly. I've tried searching Apple and other websites for help with this to no avail, all of the results I get seem to be related to completely different 'unknown errors'. I've taken a screenshot of the problem.
    Any advice? Am I overlooking something simple?

    I just had this error occur under 11.0.2 (26) on a newly installed machine.
    I then tried to log into this forum discussion so I could respond to this thread, but I found I needed to login *twice* and then reset my account username.
    Once I did this, I was then able to login to iTunes again.
    Seems apple's backend had some kind of verification flag set on the account that could only be resolved via this web forum...   Either way, it seems that fixed it.

  • "Unknown Error" when attempting to move/drag a folder in the Folders Panel in Library Module. Has anyone else experienced this issue? Thank you.

    Hello fellow LR users,
    Last night, I attempted to drag one sub-folder into a different Parent folder but then I received the "unable to move & unknown error" notification. After a few more attempts I received the same notification. My solution was moving the folder into the different Parent folder outside of Lightroom. I moved the folder in my PCs Operating System.
    Has anyone else encountered this issues? Any solutions?
    Thank you,
    Daniel

    Your method of using the OS is considered best. If you copy (drag) a folder to a new place you simply right-click on the folder name in the LR Library and choose update folder location. Then navigate to the new location.
    LR automatically updates the catalog database. You can then delete the original folder.

  • Getting an error when attempting to connect Skype

    Hello.  I am using Windows Vista 32 bit
    I am attempting to connect to Skype through my microsoft account, and I am getting the following message.
    "Sometimes the internet gets a bit sleepy and takes a nap. Make sure it’s up and running then we’ll give it another go."
    I have checked my Internet Explorer LAN settings and have not been able to determine an issue.  My IE is version 9.0.8112.16421
    If there is a clue, Yahoo Messenger has also recently stopped working.
    Please help!
    Solved!
    Go to Solution.

    I just fixed this myself.  I went into Internet Explorer, the went to Internet Options - Advanced - enabled 'Use TLS 1.0'

  • Firefox sync gives me an unknown error when attempting to sync.

    I am trying to sync Firefox 4 between two different windows machines. I set up a sync account on one, and then add the other computer as another device. As many times as I try this, only one computer will sync, and the other give me the error: Sync encountered an error while syncing: Unknown error. Sync will automatically retry this action. I have had no luck resolving this and would love some advice.

    I have the same issue with the nightly and aurora versions. Firefox 11 works fine.

  • Network-related or Instance-specfic error when attempting remote connection from SSMS

    Hello,
    I have installed SQL Server express on a Win7 desktop and want to connect to it via SSMS on a laptop. I have set up a SQL login on the desktop so I can login, but when I try to connect to the instance from the laptop via SSMS I get the error 26 with saying
    there is a network related or instance specific issue and that there is an error locating the Server/Instance specified.
    I am trying to connect to a named instance on the SQL Server on the win desktop. Remote connections are enabled and TCP 1433 and UPD 1434 ports are open in Windows Firewall. Antything else I should watch for?
    Thanks

    Hi MrDAndersen,
    According to your description, you come across the errors of pre-login handshake and wait operation timing out. Please help to post the full error log for further analysis.
    Based on my research, this issue could occur when .NET Framework 4.5 and non-IFS BSP/LSP are installed on the machine, and non-IFS BSP/LSP interferes with the call to Winsock.
    To work around the issue, you could use one of the two methods below.
    1. Determine whether a non-IFS BSP or LSP is installed. You could use the "netsh WinSock Show Catalog" command and examine every Winsock Catalog Provider Entry item that is returned. If the 0x20000 bit is clear (not set), it is a non-IFS BSP or
    LSP and remove the installed non-IFS Winsock LSPs. For more information about the process, please refer to the article:
    http://support.microsoft.com/kb/2568167
    2. Download and apply .NET Framework 4.5.2:
    http://www.microsoft.com/en-us/download/details.aspx?id=42643
    There are two connect items for your reference.
    https://connect.microsoft.com/VisualStudio/feedback/details/745004/ 
    https://connect.microsoft.com/VisualStudio/feedback/details/729323
    Best regards,
    Michelle Li

  • Error when attempting to connect

    hello there. whenever i try to connect to our new airport extreme 802.11n i get a strange error that consists of an 8 digit number that's different every time, and "PIN for "`¬Ä†å""
    it fails to connect but keeps trying and completely freezes the airport menu for about ten minutes until it finally announces that it's completely failed with, "Please contact the network administrator about access to "`¬Ä†å". `¬Ä†å isn't the name of the network.
    the light on the airport is blue and it works for someone else using it, he's using a Macbook Pro (not a core duo so no N support). the administrator isn't home at the moment but i'm getting pretty frustrated with being unable to print and scan using my printer. any ideas regarding something i could do on my end?
    Macbook Intel Core 2 Duo   Mac OS X (10.4.9)  

    OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

  • I have a -1202 error when attempting to connect to itunes windows xp is up to date

    I have a -1202 error and can not get onto an itunes account

    OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

  • Error 108 (Unknown Error) When Attempting Export

    I purchased Quick Time Pro in November and successfully saved and exported some video for use with my IPod at that time.
    The next time I attempted the operation, I started getting this Error 108 message every time I hit the Export option.
    Anyone else had this problem or have any idea what system setting I may inadvertantly have changed to cause this?
      Windows XP  

    Sorry for all of the extra questions.
    My understanding:
    It used to work and now it doesn't?
    Have you tried using a different user account? Does
    it "work" again?
    Have you recently installed any different software or
    video codecs?
    I suspect a third party software conflict.
    That's okay...I appreciate the clear communication.
    Yes, I was able to save video from the web, export it and load it to my IPod on a couple of different occasions initially and then all of the sudden all I would get was the Error 108 message.
    I haven't tried using a different user account...do you mean a different Apple user account and how would I do that?
    The only thing I can think of is that I think I recently updated my Real Player and Rhapsody players but both programs were already on my system before the problem began.
    Isn't there a way to check for conflicts? I'm thinking the device manager or am I totally off here?
      Windows XP  

Maybe you are looking for

  • Is there a way to delete Windows files on reboot?

    I'm interested in creating an installer similar to apt-get on Linux. The idea is it will update packages when new ones become available, resolve dependecies, etc. The problem is under Windows if a file is locked in memory you can't touch it so I woul

  • Problems with access to serial port using reentrant code

    Hi, I have a VI that send commands and receive answers from an instrument using de serial port. This VI runs perfectly when used alone. However I'm trying run two instances of that VI simultaneously using reentrant code and I'm facing some problems.

  • How can i change to native sql from "IN" in abap

    How can i use native sql where condition in this case? for example.. SELECT-OPTIONS ; s_vbeln for vbak-vbeln. EXEC SQL.   SELECT AA, BB, CC        INTO :ITAB-AA, ITAB-BB, ITAB-CC       FROM LEGACY@DBLINK    WHERE VBELN !!!!!!!!! <---- This Line... EN

  • How to add a clickable url

    Hi All, Could someone please help me on how to add a clickable external link to a 'mixed char' field on a PeopleSoft page? The link should be able to be entered in an instruction field on a page(by a super user) and then the same page should display

  • Error Code 5 Help - Can you recover a damaged file?

    I've been working on a document in indesign that I've been saving on a regular basis. Tonight, my file cannot be opened as it is damaged / corrupt. Error Code: 5 Anyone know how to fix this or software that works to fix and recover damaged files? Re-