Unknown error when converting to mp3

I am trying to convert a track I just downloaded from the itunes store to an mp3. I have done this many times and I know how to do it. Except now when I select to convert to mp3, I get "Itunes Unknown Error (-3)". When I try to convert to one of the other options, it just gives me the first 15 seconds. But what I really need is the mp3.
Stefan

I too have been getting this error when attempting to convert a newly purchased song to mp3. This has only started happnning recently in iTunes 10.6.3.25. It turns out that this happens when the newly purchased songs are not complete. The real problem seems to be with downloading new songs form iTunes Store. iTunes reports a successful and complete download, but when I go to play the song, only 30 seconds to a minute of audio exist. It has been occurring so frequently, that I will not purchase another song until the problem is fixed.

Similar Messages

Unknown error when exporting 32-bit 5.1 wav audio

I get the ever useful "Unknown error" when exporting the audio from Premiere Pro CS6 to a 32-bit, 5.1 channel uncompressed WAV file most of the time. I was able to get it to work just fine by pasting the audio to a new project, but that isn't working anymore. I get the same error when I change it to 24-bit audio. However, when I change to 16-bit sound it works fine.
First, is there a real audible difference between 16- and 32-bit when it's all going through a WAV to AC3 converter? The AC3 files get dumped into Encore as the audio track so that I can get 5.1 sound on blu-rays instead of Encore re-encoding things.
Second, what would cause it suddenly not work, and how can I get it working again?

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

Unknown Error When Saving with CS6

I am receiving an unknown error when trying to save my document. I have tried to take off the PDF convertable part, and tried saving it legacy style, but it's still not working. I have a doc open I need to save and won't be able to shut my computer down until I fix this... What could be the issue? Is there a fix for it?
Thank you!!!!!!
Henri

After nearly ripping my eyeballs out and chucking my laptop out the window, I finally fixed the problem!
For some reason I didn't have a CMaps folder in my Adobe - Common Files - Font folder:
C:\Program Files\Common Files\Adobe\Fonts\Reqrd\CMaps
So I made the "CMaps" folder and copied and pasted the files "Identity-H" and "Identity-V" from an "Adobe Reader" CMap folder, and now I can save text in an *.ai file with PDF Compatibility checked.
It's pretty strange Illustrator was working for 2 years without this folder, and now all the sudden it needed it. Also, this is a very obscure fix.
Hopefully the programmers at Adobe have fixed these bugs in newer versions.

-3 error when converting music

I keep getting a -3 error when converting m4a into another AAC/mp3
Does anyone know what this is? Or why it is happening?
It's using itunes10.6
Thanks

HI Scott,
Perhaps something here might help: iTunes: How to convert a song to a different file format
Carolyn

I have just started using the new premiere CC. Gives unknown error when using CBR

I tried using the same export setting for mpeg2 that I used in CS6, but CC will say Unknown error when I try to export. It will only work with Vpass 1 or 2. Any ideas why?

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
Process:         Adobe Premiere Pro CC 2014
Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier: com.adobe.AdobePremierePro
Version:         8.1.0 (8.1.0)
Code Type: X86-64 (Native)
Parent Process: launchd [2538]
Responsible:     Adobe Premiere Pro CC 2014
Date/Time: 2015-01-06 14:04:23.500 -0700
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Crashed Thread: 55 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Customer created test export with 777 permissions and set mount parameters to the following:
mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
-- Original mount options:
     General mount flags: 0x40 async
     NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
-- Current mount parameters:
     General mount flags: 0x4000058 async,nodev,nosuid multilabel
     NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
479         V3 CREATE Reply (Call In 478)
484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster. Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

I get error message "unknown error" When trying to log on to itunes via pc, help please!

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

Error when converting a numeric field to XML

Hi,
When i run the Adobe intractive form,i am getting following exception
"Error when converting a numeric field to XML"
Anyone plz suggest
Regards,
vinoth

Hi Vinoth Raja,
For resolving the following exception
"Error when converting a numeric field to XML"
You have to follow the below link:-
http://www.saptechies.com/error-when-converting-numeric-field-xml/
May be it will help you
Regards,
Sushma Yadav

Error when converting a constant amount MAXBT in T511P

Dear Expert,
I am encounter error as below when run payroll for Macao,
Error when converting a constant amount MAXBT in T511P
CONVERT_TO_LOCAL_CURRENCY has been Called
Data used:
Validity end date: 28.02.2014
Constant: MAXBT
T511P Currency MOP
Currency of payroll driver HKD
Therefor, do the checking on OE00 and check the currency and validity dates for MOP currency.
Also, checked table V_T001 table the currency that assigned for the company code.
Checked the MOP currency and ISO code in V_TCURC table. And checked ISO code in V_CURC table as well.
Still encounter error as above, appreciate you advice.
Thanks,
Mel

What are the values for :
Country grouping for PA/PSA:
Currency appearing in IT0008:
Country key in IT0006:
Bank Country in IT0009:

Unknown error when connecting ipod to computer. Always worked before. Any ideas?

I'm getting and "unknown error" when I connect my Ipod to my computer. I have always used this computer and it has always worked. Any ideas?

Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
I would appreciate any suggestions.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

RH_START_EXCEL_WITH_DATA - System Error:unknown error when GUI_DOWNLOAD is

Hi,
I am using FM 'RH_START_EXCEL_WITH_DATA' to download data of an internal table to excel sheet.
I'm passing the filename, internal table as mentioned below:
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
DATA_FILENAME         = v_xls_file
DATA_PATH_FLAG     = 'W'
DATA_TABLE              = i_test[].
But I am getting this following error:
System Error: unknown error when GUI_DOWNLOAD is called.
Thanks in advance.

Hey Wincy , If you want to download Internal Table's data in to Excel just use the Method
cl_gui_frontend_services=>gui_download....
If you need any code assistance kindly Let me know. although the method is easy to use and Works fine.

HT1692 iPod keeps giving the error "unknown error" when trying to sign in.Why?

iPod keeps giving "unknown error" when signing in. Why?

Signing into what?
Is "unknown error" the complete error number?

I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

First, turn off your CAPS lock. Typing in all CAPS is considered screaming/yelling and many will simply ignore your posting.
Are you currently having issues? Is it when trying to purchase only on the device? Are you able to complete purchases via iTunes on your computer?

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

Unknown error when converting to mp3

Similar Messages

Maybe you are looking for