Unknown error when getting list of virtual machines

I installed the VMC this morning and launched it. After validating the credentials it began a very long running process where it shows the status of 'Getting list of virtual machines'. After approx five minutes an error dialog is displayed which is blank
(aside from a red 'X'). Selecting OK leaves me with a blank list of VMs. There are no events in the application event log. Any help?
William Busby, PMP

Are you connecting to vSphere 4.0? If so MVMC does not support directly connecting to vSphere 4.0. If your 4.0 host is managed by vCenter 4.1 / vCenter 5.0 you can convert VMs on the 4.0 host by connecting to the vCenter servers that is managing the host.

Similar Messages

  • Error when creating a new Virtual Machine from VMs and Templates

    I try to created a VM from a Template. On a Step 1.5 (Install VM components) and falid. This is a error:
    Error (10659)
    Cannot run Sysprep on virtual machine SRV2k8test because the template does not have a virtual hard disk attached that has been generalized.
    Recommended Action
    Specify a template that has been generalized and then try the operation again.
    we expect your help.

    Sorry to dredge up an old topic - but got some really weird behavior.
    I knew that I had to sysprep the vhdx's before bringing them into a template. I've done this (verified twice), and I still end up with the error list at the top of the thread:
    Error (10659)
    Cannot run Sysprep on virtual machine SRV2k8test because the template does not have a virtual hard disk attached that has been generalized.
    Recommended Action
    Specify a template that has been generalized and then try the operation again.
    we expect your help.
    I am running SCVMM 2012 R2, and things were actually running smooth as of three days ago. Templates built before then are still working and can be deployed with no problem.
    However, building a new template today gives the above error when testing the deployment.
    http://www.fortypoundhead.com

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

    I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.

    First, turn off your CAPS lock.  Typing in all CAPS is considered screaming/yelling and many will simply ignore your posting.
    Are you currently having issues?  Is it when trying to purchase only on the device?  Are you able to complete purchases via iTunes on your computer?

  • I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

    I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
    Please Help

    I received this email from Apple and this corrected the problem for me...  I only had to reset the iTunes cache
    1) Open iTunes
    2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
    3) In the Preferences menu, click the Advanced tab
    4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

  • I keep getting unknown error when trying to download apps

    Does anyone know why I keep getting unknown error when trying to download apps?

    does it says anything else than unknow error?
    try going to settings>store, click on apple id and then sign out. Restart iphone and sign back in and try downloading again

  • Get an error unknown error when trying to access app store

    I get an unknown error when trying to access app store on my iphone 4...I have turned it off and on, updated the software, etc.  I have never been able to sign in.

    You could add your contacts in one by one  (or a few at a time) on whatever you are syncing with (Google, MS, etc.) and try and catch which contact is causing problems when you sync.
    If you've been helped click on , if you've been saved buy the app.
    Developer of stokLocker, Sympatico and Super Sentences.

  • Why do I get unknown error when I try to add to my iCloud storage

    Why do I get unknown error when I try and add storage to iCloud account ? I have funds in account but I do not have a credit card # on file.

    This didn't solve it for me. Card details already there, and iTunes purchases working fine.
    But just to be sure I' have re-entered and resaved my card info and checked, re-entered and re-checked my appleID info.
    Still not working.
    Anyone got any other suggestions?

  • Re: the 'noise' effect. I get a 'unknown error' when encoding my movie.

    When I am using the add, 'noise' effect I get a 'unknown error' when I  try to encode my movie. Help.
    rik

    Yes, I have an idea: do not use a string for $parameters; use a double-quoted here-string:
    $parameters=@"
    <?xml version="1.0" encoding="utf-8"?>
    etc...
    ( and don't forget to delete the grave accents - back ticks )

  • Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

    Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
    Process:         Adobe Premiere Pro CC 2014
    Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier: com.adobe.AdobePremierePro
    Version:         8.1.0 (8.1.0)
    Code Type: X86-64 (Native)
    Parent Process: launchd [2538]
    Responsible:     Adobe Premiere Pro CC 2014
    Date/Time: 2015-01-06 14:04:23.500 -0700
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Crashed Thread: 55  Dispatch queue: com.apple.root.default-priority
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Customer created test export with 777 permissions and set mount parameters to the following:
    mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
      -- Original mount options:
         General mount flags: 0x40 async
         NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
      -- Current mount parameters:
         General mount flags: 0x4000058 async,nodev,nosuid multilabel
         NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
    The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
    478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
    479         V3 CREATE Reply (Call In 478)
    484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
    485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
    V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT  -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster.  Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

    That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard.  FAT32 only allows for file sizes up to 2 gigs.  And as soon as it reaches that...I would get that error.  I don't know if that is why you are getting that error...but it would be easy to check.  1) are you generating a file that is over 2 gigs?  2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

  • Unknown error when connecting ipod to computer.  Always worked before.  Any ideas?

    I'm getting and "unknown error" when I connect my Ipod to my computer.  I have always used this computer and it has always worked.  Any ideas?

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

    I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
    Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
    When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
    I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
    The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
    I would appreciate any suggestions.

    #36 - One or More P2 files failed to import.
    Shane's Stock Answer #36 - "One or more clips failed to import..."
    Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
    What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
    ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
    ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
    Shane

  • RH_START_EXCEL_WITH_DATA - System Error:unknown error when GUI_DOWNLOAD is

    Hi,
    I am using FM 'RH_START_EXCEL_WITH_DATA' to download data of an internal table to excel sheet.
    I'm passing the filename, internal table as mentioned below:
    CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
    EXPORTING
    DATA_FILENAME         = v_xls_file
    DATA_PATH_FLAG     = 'W'
    DATA_TABLE              = i_test[].
    But I am getting this following error:
    System Error: unknown error when GUI_DOWNLOAD is called.
    Thanks in advance.

    Hey Wincy , If you want to download Internal Table's data in to Excel just use the Method
    cl_gui_frontend_services=>gui_download....
    If you need any code assistance kindly Let me know. although  the method is easy to use and Works fine.

  • Unknown error when merging files

    I have encountered an unknown error when trying to combine files into a single pdf.  It specifically states: "No PDF file was created because Acrobat encountered an unknown error."  This is unusual as just yesterday I was able to perform this task with ease - and being able to do this task will save me hours of work time.  What has been done between yesterday and today - I updated my windows 7 and maybe even updated Adobe  Acrobat.9 Pro - I also deleted some malware that was unnecessary for my computer: Qwiklinx; yontoo; ... I did a restore to when this action worked but to no avail.
    Thank you for your thoughts on this matter.

    Hi Kylie,
    Which version of Premiere Pro are you using? Can we get more details about this case? FAQ: What information should I provide when asking a question on this forum?
    Thanks,
    Kevin

  • JInitiator 1.3 Fatal Error  Attachment to a running Virtual Machine failed

    We are running forms 9i from 9ias R2. We have an outside client trying to access the application from a machine with Windows XP. They receive the following errror after downloading the Jinitiator 1.3.1.9: JInitiator 1.3 Fatal Error - Attachment to a running Virtual Machine failed. As we are using Windows 2000, we have not come across this before and I find nothing on Metalink.
    Has anyone else had this problem? If so, do you have a solution?

    Hi,
    whatever browser you are running, during installation of the Browser (Netscape 7.x) or IE (postinstall) you decided to make teh Java Plugin 1.4 your default JVM. This means the VM is started when JInitiator loads which then leads to this collision. Disable Java Plugin as a default VM and it shoudl work fine.
    Frank

Maybe you are looking for