Unknown error when trying to burn

Suddenly I can't burn a playlist. It reads the list, begins the burn, stops, thinks and then closes down. I get the following error message: "The attempt to burn a disco failed. And unknow error occured (4261)." Out of the last 20 attempts, I got 3 discs burned successfully.
Anyone have any ideas? It was working fine a few months ago. I've updated my iTunes version, so that isn't it.

trying to transfer over library from my old hp itunes to new powerbook. burned some of the songs onto cds as data instead of audio but once the playlist was burned it said unknown error -50. then when i put the cd in my mac the same thing came up and it wasnt recognized by itunes on the powerbook. AHHHH. help please. oh and also some of my songs from the cd then went into itunes if i dragged them but some didnt. both mp3 and m4a. and i want my purchased songs to transfer too

Similar Messages

Getting an unknown error when trying to burn cds!

Ive had itunes for awhile, but now I'm getting an unknown error (261) when trying to burn cds from itunes. Ive upgraded to the latest itunes and have tried a few different types of blank discs but to no avail. Other than this error, the actual cdr drive seems to be working fine. Can anyone help? thanks

trying to transfer over library from my old hp itunes to new powerbook. burned some of the songs onto cds as data instead of audio but once the playlist was burned it said unknown error -50. then when i put the cd in my mac the same thing came up and it wasnt recognized by itunes on the powerbook. AHHHH. help please. oh and also some of my songs from the cd then went into itunes if i dragged them but some didnt. both mp3 and m4a. and i want my purchased songs to transfer too

Keep getting an unknown error when trying to burn an itunes cd

I cannot burn a cd from my itunes. I have done all the steps correctly. I keep getting an unknown error seconds after i hit the burn disc button and my cd pops out of my disc drive. I can burn cds using real media player but I cannot burn my itunes music. What do I do?

trying to transfer over library from my old hp itunes to new powerbook. burned some of the songs onto cds as data instead of audio but once the playlist was burned it said unknown error -50. then when i put the cd in my mac the same thing came up and it wasnt recognized by itunes on the powerbook. AHHHH. help please. oh and also some of my songs from the cd then went into itunes if i dragged them but some didnt. both mp3 and m4a. and i want my purchased songs to transfer too

I get error message "unknown error" When trying to log on to itunes via pc, help please!

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
Please Help

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

I keep getting unknown error when trying to download apps

Does anyone know why I keep getting unknown error when trying to download apps?

does it says anything else than unknow error?
try going to settings>store, click on apple id and then sign out. Restart iphone and sign back in and try downloading again

Get an error unknown error when trying to access app store

I get an unknown error when trying to access app store on my iphone 4...I have turned it off and on, updated the software, etc. I have never been able to sign in.

You could add your contacts in one by one (or a few at a time) on whatever you are syncing with (Google, MS, etc.) and try and catch which contact is causing problems when you sync.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
Regards, Steve

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

"Medium Write Error" when trying to burn a CD!!!!

I keep getting a Medium write error when trying to burn an audio cd using ITunes. I already tried switching out cheap CD-R's for high quality ones and the same thing happens. I also can't burn a picture CD using finder because another error message pops up so i don't know what it could be... Any help would be greatly appreciated!

Could be an issue with the drive itself, especially if you have one of the Matshita drives installed in many Macbook Pro which are reported to be 'krappy' drives. See here for more info...
http://tinyurl.com/kgrz4
Patrick

Enocore CS5 error when trying to burn to blue ray disc

My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?

Enocore CS5 error when trying to burn to blue ray disc
My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?
I went to the original motion menu source and saved it as Microsoft AVI (file name: Premiere pro avi for menu.avi) instead of AVCHD hoping that might help and then brought that file into Encore and linked that as the motion video for the top menu (the other menus don't have a motion background). I tried to animate the buttons for all the menu pages. When I click on the Premiere Pro avi for menu.avi asset the options show for DVD Transcode automatic and for Blu Ray Automatic (for transcoding). The file shows as 720X576 and it is 34 seconds long. The top menu is checked to animate buttons and I can uncheck it if I want, the submenus-start at page 1- have the animate buttons grayed out but checked and I can't uncheck these even if I wanted to. When I tried to burn this to disc, it got further along- burning 13.15 gb to disc and then I got the following error message:
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time = 1321.253267 seconds-
I am running Windows 7 64 bit, 2.4 ghz processor Quad core, 6 gb of memory and 69.1 gb free on my external hard drive and 29.7 gb free on my c drive. I have an NVIDIA GE force 8500T card. Any ideas?

I'm getting an error when trying to burn Blu Ray.

When trying to burn a Blu Ray disc in Encore it is giving me an error that says, Blu Ray Object "wedding 6-20-09 tru blu.m2v" export
file not found . Please help. Thank You .

First, Fix Encore Win7 Problem http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Second, shorten the name and remove all spaces and non-letter characters
Long File Names Cause Crashing http://forums.adobe.com/thread/588273

Error when trying to burn DVD

Hi
I get this error (repeatedly) when trying to burn DVD recently.
Error code 0x80020022
Burning disc failed because communication to the disc drive failed.
It's self explanatory I know, but what am I supposed to do about it? Is it a problem with my hardware?. I can't see the icon for my disc drive in Disc Utility to check it.
I've shut down and restarted, tried different DVDs, they're all DVD-R although I did try at first with a DVD +RW and hope this hasn't caused some damage.
Hope someone can help thanks.
I'm having loads of problems creating iDVDs as well. But I think I need to resolve issues one at a time....
Helen

Hi Helen - here are some general purpose iDVD tips that may address some of your unspecified troubles. In terms of communication troubles, could your hard drive be going to sleep, or screensaver kick in and interrupt the process?
General tips:
Do something small first; get some experience before you need to do a big project.
Lots of memory helps; and you'll need 10-15 gigs of space on the hard drive for scratch space.
Buy good quality disks - I've seen recommendations for Maxell, Sony, TDK and a few others based on testing. I primarily use the first two and usually don't have trouble.
Give yourself lots of time.
Turn off your screen savers and energy savers; don't let your hard drive go to sleep.
Get your computer healthy and ready for some heavy lifting. (video work could be the hardest job your computer can do) MacJanitor and Apple's DiskUtility's Repair Permissions is my routine.
Most of the time iDVD is working, it is encoding (compressing) your video to fit on the DVD. Create an image .img file (patchburn for iDVD 4 and older) and use Toast or Disk Utility to burn it to disk. Burn slow (1 or 2x) and let it cool down.
I keep my projects under 60 minutes (for highest resolution).
Try testers; you can use DVD-RW
I import into iDVD rather than export from iMovie (fewer errors).
No other apps open.
Let it encode and burn while you go to bed; it can take awhile, esp. on older Macs. Don't quit iDVD even when the DVD is burned, until you've played the DVD in a regular player (it's much easier to burn another disk and check to see if the problem was a bad disk, than to go back through all that encoding again by quitting iDVD).
John

HT1692 iPod keeps giving the error "unknown error" when trying to sign in.Why?

iPod keeps giving "unknown error" when signing in. Why?

Signing into what?
Is "unknown error" the complete error number?

Unknown error when trying to burn

Similar Messages

Maybe you are looking for