Unknown Error While Burning DVD

I've had hit and miss issues burning DVDs from the timeline in PP CS2 in the past, usually resolved. This time, a consistant unknown error has come up at the same point in the burn process regardless of the project, duration or file type.
Since I will eventually install CS5 after my current project is complete, it isn't critical that I find a solution. I only use this feature to make test DVDs, but I am curios as to why this may be happening at the same point no matter what footage or project file I use. One thing I know, it isn't about basic system capabilities since I was able to burn projects, come back later (days or weeks later) without changing anything and not be able to burn the same project. This may be about cache, something taking up RAM or scratch disk size. Screen savers and all extra stuff have been turned off.
Win XP-Pro

If CS3 gives you the option, write an ISO file, or DVD folder, and use Imgburn to do the actual disc writing
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no DVD player is required to read a burned disc, having a "good" one from a high quality blank will help
Use Taiyo Yuden single layer or Verbatim Two layer Or Falcon Pro for inkjet printable Two layer
Plus, of course, you MAY have a failing drive with a hardware problem

Similar Messages

Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

I am trying to burn a dvd in premiere elements 8.0 but after 96% iam getting this error :
"device error-the target device isn't suitable for use."
I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
System configration :
win vista 32 bit .
Processor :Amd athlon 64 dual core 2.60 ghz .
Ram :3 gb
Graphic card :nvidia geforce 6150 se .
Camcoder model number :JVC gz-hm320.
Format :.mts
Frame size :1920/1080
Frame rate :29.97.
Please look into this problem .
Regards
Manoj Khati

This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116

M30-842: Power Calibration error while burning DVD-RW

I have faced a problem with my M30-842. Several times I have tried to erase burned on my laptop DVD-RW and Nero would say "Burn process failed. Power calibration error". So I cannot erase or continue multisession DVD-RWs.
Burning CDs is ok.
Please help me with the problem, how can I solve it? SOS!
Semen

Hi Semen
Can you please try to use roxio software built into Windows XP? There is also the same option. It will be interesting to know if this problem is caused by software that you use or if there is some malfunction of your device.

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

I'm getting "runtime error: unknown exception" when burning DVDs on PE12

I'm getting "runtime error: unknown exception" when burning DVDs on PE12

Some of this may be for Premiere Pro, but SHOULD also help with Premiere Elements
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Also http://www.microsoft.com/en-us/download/details.aspx?id=14632 for a Microsoft download
Also search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Microsoft help articles
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements does NOT burn to a folder for BluRay (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

Unknown error when burning disc

I get an unknown error when burning playlists to blank discs. My computer begins to write the discs, but stops after a song or two.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I keep getting "Unknown Error while saving"

I keep getting "Unknown Error while saving"
Using APE-11 on Windows 7- This error is a first for me, after many years of using Premiere. The product is a mix of photos (jpg and png), video clips (mpg-2 and mp4), and audio clips (all mp3). When I try to publish as Standard DVD- MPEG-2. I get the error. Error repeats saving as MP4. Error gives no location on the timeline where it is running into an obstacle to saving, so I do not know where to begin looking to remove repair or replace the item causing the 'unknown error'. The prel runs fine, start to finish, giving no indication that the save may run into a problem on final rendering.
I have tried many different options like rendering the entire timeline prior to saving, converting the clips to all be the same format, with no resolution to the problem.
I have worked many long hours for many weeks on this project, and I am not going to give it up, especially when the majority of the clips were created on APE in the first place, and the images are all Photoshop edited images
HELP PLEASE!!
DougN

Screenshot of error message for above issue
Also: Since first report, I have attempted render with all sound clips removed (easiest to to with hundreds of clips/photos), with no help. Same error appears.
I will continue removing aspects of the project until I get a completed save, or until I get an answer here!
After removing the sound and video clips, video saved ok, with blank spots where the missing video clips were. So I reopened the original prel file, and began checking them individually.
When I checked the clip properties, it correctly identified the path to the source video, but when I asked it to 'reveal in project', I got this error
So I assume this is where the SAVE error is happening, but as I am not an Adobe coder, I have no idea what it is telling me.
I did check to insure that the source video from which this clip originates, is in the project assets. I checked all the other clips as well, and any clip from this source video, generates the same error.
The source video runs fine on its own and is an mpeg-2 file.
Properties of the source video are:

Errors while burning?

I just put together a pretty simple, one-track video on iDVD and while it was burning, I got a message saying something like "errors while burning" - I did not save the exact message, but I'm wondering what the cause for this might be. I actually closed out of the DVD project, took it to the trash, and recreated a new DVD project out of the iMovie project. I thught this would fix the problem, but there were still errors while burning the second time. I tried to play the DVD and the system would not read the DVD, there was no picture at all. Any suggestions? (I have more then 25GB of free space on my hard drive - about 35 I believe)

You're welcome. Here's a bit of background:
a) I use MacJanitor to trigger the Mac's maintenance scripts (download it from VersionTracker.com), and then use Apple's Disk Utility (look in Applications-Utilities) to repair permissions on your main hard drive. Your Mac would do maintenance tasks by itself if it was turned on continuously, but MacJanitor lets you run daily, weekly, and monthly maintenance tasks (I run it before I do something big, or when my Mac seems slow or goofy). Disk Utility can do first aid on hard disks, and on your main hard drive (boot drive), it can Repair Permissions (It's important that permissions are correct).
b) Creating an image file is often recommended in these forums because it gives you more control over the burning process, and it creates a virtual DVD that reliably can be tested. In iDVD, choose Save As Disc Image and iDVD will go through the encoding and other processes, except the DVD is created on your Desktop. You can use Apple's DVD Player to play the virtual DVD and make sure it works like you want. When you're satisfied, Disk Utility can be used to copy the virtual DVD to an actual disk. To do this, choose the image file in DU and click Burn (you'll have some options for burn speed -- I'd choose something slow to reduce burning errors -- perhaps 1x or 2x but wouldn't go faster than half the rated speed of the burner).
Shout if you need clarification.
John

Windows App developer account and .aetx file, Unknown error while generating AET

Hi Everyone,
firstly, sorry for my not perfect english, but I hope that somehow understand what i want to say.
So, I am a student (I do not know if it makes a difference but inform you), and I wanted to write a universal windows app for company (This would be the first application WP and Windows this company, previously did app on Android and IOS, and websites).
I wrote a little bit and I wanted to throw the first version on hockeyapp.net to the head of the company and the customers can test it and i have problem. I upload .appx file bu i have problem with generate .aetx file. When I run this command AETGenerator.exe
PFXFilepath PFXFilePassword it gives me an error in command prompt
Unknown error while generating AET
startIndex cannot be larger than length of string.
Parameter name: startIndex
I've read about these certificates but did not find a specific answer (a very specific answer). So what I need to do, What do I need, what to buy and etc.
What are my solutions?
What should I do?
Is it enough that I register and I buy individual developer account?
I hope someone answer me,
thank you :)

Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? Thanks

As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

Syldb_sp is unknown error while check

Hi
i am getting
syldb_sp is unknown error while check.
Thanks in advance.

Hi,
i have check periods are open till 2010.
and parameters for fiscal year variant are also correct.
In FBZP i have check configuration there is no prob in it.
any solution on this?
Regards,
Yojana.

Unknown Error while communicating with O365 BEC Web Service

Hi Guys,
When I try to add a new mail user in O365 Exchange, one strange error is thrown.
Are any guys kind enough to help me ?
Here is the script and the error.
PS C:\Users\o365-user> $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList
'[email protected]', $(ConvertTo-SecureString -String '*******' -AsPlainText -Force)
PS C:\Users\o365-user> $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'https:
//ps.outlook.com/powershell/' -Credential $cred -Authentication Basic -AllowRedirection
WARNING: Your connection has been redirected to the following URI:
"https://pod51053psh.outlook.com/powershell-liveid?PSVersion=4.0 "
PS C:\Users\o365-user> Import-PSSession $session
WARNING: The names of some imported commands from the module 'tmp_zkc5sid4.gpq' include unapproved verbs that might
make them less discoverable. To find the commands with unapproved verbs, run the Import-Module command again with the
Verbose parameter. For a list of approved verbs, type Get-Verb.
ModuleType Version Name ExportedCommands
Script 1.0 tmp_zkc5sid4.gpq {Add-AvailabilityAddressSpace, Add-DistributionGroupMember...
PS C:\Users\o365-user> $users=Get-MailUser
PS C:\Users\o365-user> New-MailUser -Name '[email protected]' -DisplayName 'Test LIU'
-MicrosoftOnlineServicesID '[email protected]' -Password $(ConvertTo-SecureString -String '*****' -AsPlainText -Force)
Unknown Error while communicating with O365 BEC Web Service (Exception type
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException", message=
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException: Couldn't create BEC Web Service:
The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft
Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject ---> System.ArgumentException: The matching certificate for certificateSubject
CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be
found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.InvokeWithRetry[TResponse](Action operation)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.GetUserByUpn(GetUserByUpnRequest request)
at Microsoft.Exchange.ProvisioningAgent.BecWebServiceLiveIdManager.GetMemberType(SmtpAddress memberName)", inner
message "System.ArgumentException: The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com,
OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)")
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailUser], RecipientTaskException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=d97a193e-91a7-4430-ac64-6b7003f5b9b0,TimeStamp=4/23/2015
9:37:58 AM] [FailureCategory=Cmdlet-RecipientTaskException] 3F9FDA25,Microsoft.Exchange.Management.RecipientTasks
.NewMailUser
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'ApplicationImpersonation' -User 'test1_1@smokeazu
rebeta5.onmicrosoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=88777637-298d-4bb1-972f-b61161566a57,TimeStamp=4/23/2015
9:37:59 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'Mailbox Search' -User '[email protected]
microsoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=2b64d3a2-97da-4de5-be8c-00ad73452456,TimeStamp=4/23/2015
9:38:00 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> Remove-PSSession $session
PS C:\Users\o365-user>
Thanks
Budlion LIU

Hello,
Or you can also ask on Exchange Online Forum:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Unknown error while updating module use!

I restarted XE with "/etc/init.d/oracle-xe stop /etc/init.d/oracle-xe start" and then see this error message in the terminal console. Every serveral minutes, the error "Unknown error while updating module use!" is echoed.
Any advice?

Look for the alert_xe.log file, maybe you'll find some additional information there if that message is related to your XE instance.
C.

Error: SharePoint Workspace encountered an unknown error while attempting to create this list

Hi,
I am using Sharepoint workspace to offline synchronize a document library.
In the workspace, I provided the site name. All but one document library was downloaded.
I selected the document library, which did not get downloaded. I am getting the below message:
SharePoint Workspace encountered an unknown error while attempting to create this list. Ask your site administrator to resolve the issue and then click Resolve Error in the Resolve tab.
If I click on Resolve error, the sharepoint workspace crashes and opens again.
How to fix this?
Thanks

Hi,
For troubleshooting your issue, you can take steps as below:
Running groove.exe /clean from command prompt
Running groove.exe /clean /all from the command prompt
Removing the library from sharepoint workspace and re-adding it
Deleting the users folder from c:\users\username\appdata\local\microsoft\office\groove\user
Running a repair on Office 2010
Uninstalling and reinstalling the Sharepoint Workspace tool from the computer
Verifying all updates are installed
Reference:
https://support.office.com/en-in/article/Resolving-conflicts-and-errors-in-SharePoint-Workspace-70928d16-1cff-4931-b693-f5e346a7bf99?ui=en-US&rs=en-IN&ad=IN#bm1
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unknown Error while saving the query to My Portfolio

Hi,
We have a report published on the portal and users are accesing these reports completely through portal. After running the report user is trying to save the report to My Portfolio on the portal and it is giving an error as "Unknown Error". Anybody who faced this particular error, please give your suggestion.
Regards
Vijay

Hi Mike,
Please follow the following steps to resolve the issue:
a. Identify the list of users who are getting the unknown error while saving to My Portfolio
b. Provide a role called COM.SAP.IP.BI.Business_Explorer_Showcase
c. Once the role is provided to the users, they will get a new tab called Business Explorer in the portal and ask them to click on that tab and then click on My Portfolio button in the subsequent screens
d. Once the user clicks the My Portfolio tab this will create the KM folders in the backend for the users to save the report at the run time
e. Once this is done, ask the user to log off and log in again in to the portal
f. There after users will be able to save the queries to My Portfolio
g. Once this is resolved ask the security team to remove the COM.SAP.IP.BI.Business_Explorer_Showcase role (this role need not be given for a long time).Points.
Regards
Vijay

Unknown Error While Burning DVD

Similar Messages

Maybe you are looking for