'Unknown Error' while exporting a document as '.DOC'

I'm using Pages '09 on a Mac Mini running OS-X Lion.  I have a 66-page document, originally a .DOC file which I modified and am trying to convert back to a .DOC file.  When I try to convert it I get a warning dialog which says: 'An Unknown Error Occurred'.
I searched these pages and found that a number of people reported this and managed to fix it by solving some sort of problem with fonts, but I could not understand what people said they did to fix it.  So I made a duplicate of my document,  removed the last 30 pages, tried to export, got the error.  Removed the last 15 pages, etc. until I found the page which was causing the problem.
Doing this I found two problem pages.  The first one had a style called 'Body Bullets' which was using Helvetica 10 point.  I changed it to Arial 10 point, but it did not solve the problem.  So I deleted the style and used a built-in style called 'Bullet' which I redefined to use Arial 11 point.  That worked.
The next problem page had a small section in Arial 10-point.  I changed it to use 'Body' style (which I had defined earlier to use Arial 11-point) and now the whole document can be successfully converted to .DOC without errors.
My question is can this be fixed or do I have to avoid using Helvetica/Arial 10-point fonts in my document?
Thanks.
Martin Barker.

Hi
Here I have no problem with these fonts :
For Doing this I found two problem pages I used Helvetica 10.
For The next problem page had I used Arial 10.
I was able to export without any kind of problem.
It would be a good idea to scan your fonts with FontBook.
Some may be corrupted or some may be conflicting.
Yvan KOENIG (VALLAURIS, France) mercredi 18 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Similar Messages

  • Error Compiling Movies: Unknown Error while exporting

    Hey guys...I searched every where and have yet to find a solution to my problem so sorry if this is a repeat post...but as the title states, I get an "unknown error" message after successfully rendering my clip/sequence and trying to export. So the error occurs while trying to export my rendered clip. The exact message is "Error Compiling Movies: Unknown Error. This has been extremely frustrating as I have done tons of edits with out experiencing this issue. It started happening out of no where. Anybody got any advice or fixes? Much would be appreciated.

    Error Compiling Movie
    -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
    -http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
    -and nested sequences http://forums.adobe.com/thread/955172
    -and WMV files frame rate http://forums.adobe.com/message/4629210

  • Getting Runtime error while uploading Business document (in .DOC format) to project in Solution Manger under Gen. Documentation tab (SOLAR01) .

    Hi there,
    Below are the steps that I followed to upload the business doc.
    S1: Uploading the business process related document file (.DOC) to the business process step under Gen. Documentation tab.
    S2: Providing the title, docuemtnatation type and released status for uploading the new document.
    S3:  Selecting the .DOC file to be uploaded. As soon as I try to upload the document I am getting the run time error as shown in the attachment. It is showing the short description that function Module "IW_C_PH_CLASS_VSP_GET" not found. I followed the steps to resolve this issue mentioned in the description. But still I am getting the same dump again and again. Any help will be highly apperitiated.
    Thanks and Regards,
    Rutvik Upadhyay

    Hi Rutvik,
    Please check and implement notes:
    1823986 - SYB: Improved Data Load ("ins_by_bulk")
    1605169 - SYB: SAP BW7.02 Correction Collection
    Thanks
    Vikram

  • Heap space error while creating XML document from Resultset

    I am getting Heap space error while creating XML document from Resultset.
    It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
    I am already using -Xms32m -Xmx1024m
    Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
    here is my code:
    stmt = conn.prepareStatement(sql);
    result = stmt.executeQuery();
    result.setFetchSize(999);
    Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
    JDBCUtil.write(doc, fileName);
    public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
        throws ParserConfigurationException, SQLException {
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
            DocumentBuilder builder = factory.newDocumentBuilder();
            Document doc = builder.newDocument();
            Element results = doc.createElement("sims");
            results.setAttribute("bank", bankId);
            results.setAttribute("record_type", "HEADER");
            results.setAttribute("file_type", interfaceFileType);
            results.setAttribute("version", version);
            doc.appendChild(results);
            ResultSetMetaData rsmd = rs.getMetaData();
            int colCount = rsmd.getColumnCount();
            String columnName="";
            Object value;
            while (rs.next()) {
                Element row = doc.createElement("rec");
                results.appendChild(row);
                for (int i = 1; i <= colCount; i++) {
                    columnName = rsmd.getColumnLabel(i);
                    value = rs.getObject(i);
                    Element node = doc.createElement(columnName);
                    if(value != null)
                        node.appendChild(doc.createTextNode(value.toString()));
                    else
                        node.appendChild(doc.createTextNode(""));
                    row.appendChild(node);
            return doc;
    public static void write(Document document, String filename) {
            //long start = System.currentTimeMillis();
            // lets write to a file
            OutputFormat format = new OutputFormat(document); // Serialize DOM
            format.setIndent(2);
            format.setLineSeparator(System.getProperty("line.separator"));
            format.setLineWidth(80);
            try {
                FileWriter writer = new FileWriter(filename);
                BufferedWriter buf = new BufferedWriter(writer);
                XMLSerializer FileSerial = new XMLSerializer(writer, format);
                FileSerial.asDOMSerializer(); // As a DOM Serializer
                FileSerial.serialize(document);
                writer.close();
            } catch (IOException ioe) {
                ioe.printStackTrace();
            //long end = System.currentTimeMillis();
            //System.err.println("W3C File write time :" + (end - start) + "  " + filename);
        }

    you can increase your heap size..... try setting this as your environment variable.....
    variable: JAVA_OPTS
    value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

  • Runtime error while posting a document (FB70/FBS1)

    Hi
    I am getting a runtime error while posting a document through FB70 or FBS1 .
    The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
    And the program dumps in Function module SO_KPRO_DECIDE.
    Has any one faced this problem?

    Hi,
    Please check the psoting date and also the reversal  date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
    Thank you,
    Shilpa.

  • Error while loading service Document Services Configuration (NW 7.0 SP13)

    Hello,
    I'm in the process of configuring the Adobe Document Services. Now I've received the Certificate + Credentials from SAP which I requested as described in Note 736902. I try to install them according to the Adobe Document Services Configuration Guide which I've downloaded from https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd. [original link is broken] I've copied the pfx File to /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/TrustManagerService/trust/credentials.
    Then I started Visual Administrator and opened Server <x> &#8594; Services &#8594; Document Services Configuration. Here I get this Error returned:
    Error while loading service Document Services Configuration
    com.sap.engine.services.adminadapter.exception.AdminException: com/adobe/ads/service/configuration/swing/CredentialTabUI
    Does anyone has a hint how I can resolve this problem?
    Regards
    Gregor

    Hello,
    I solved this problem by restarting J2EE and the Server.
    Regards
    Gregor

  • Error while exporting/transporting the Business system from Dev to Quality

    Hi,
    We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
      404   Not Found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    We have followed the following procedure to export :
    1. opened the business system.
    2. Clicked on export option
    3. tried to download
    then we got the above error message.
    Please provide your precious inputs to resove our problem.
    Thanks
    Ramesh

    Go through the following links for transporting XI objects.
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    ere's a good link for what you are looking.
    Re: Transport design and configuration objects
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Pls reward if useful

  • Error While Releasing Accounting Document & Proforma Invoice--URGENT

    Dear Gurus,
    I am facing problem in below cases.
      -- Proforma Invoice canot be cancelled ....If i need to cancel then wht needs to do
    -- I created New Material Master again old material and made sale getting Acc determinatin error while releasing accouting document.. But in old cases( old material) no problem like this. Y like this.
    Pls guide me.
    Regards,
    Venkat

    Dear All,
    Thanx your kind replies. I analysis and foud following:
    Access       Message                    Description
    05       123                    Access ZKOF not carried out
    Access     Complete     
    Field Condition Table          Value in Doc
    Chart of Accts          CAIN
    Sale Org                          1000
    Plant                           F201
    AccAssg Grp          01
    Acct Assgn. Grp          05
    Account Key          !! ( Showing Yellow Indicator)
    Above things showing Against Condition TYpe JEXT.
    I checked in Pricing procedure and condition Type JEXT....against this no Accounting key assigned.
    No problem faced earlier...now showing like this........y.
    Regards,
    Venkat

  • Error: SharePoint Workspace encountered an unknown error while attempting to create this list

    Hi,
    I am using Sharepoint workspace to offline synchronize a document library.
    In the workspace, I provided the site name. All but one document library was downloaded.
    I selected the document library, which did not get downloaded. I am getting the below message:
    SharePoint Workspace encountered an unknown error while attempting to create this list. Ask your site administrator to resolve the issue and then click Resolve Error in the Resolve tab.
    If I click on Resolve error, the sharepoint workspace crashes and opens again.
    How to fix this?
    Thanks

    Hi,
    For troubleshooting your issue, you can take steps as below:
    Running groove.exe /clean from command prompt
    Running groove.exe /clean /all from the command prompt
    Removing the library from sharepoint workspace and re-adding it
    Deleting the users folder from c:\users\username\appdata\local\microsoft\office\groove\user
    Running a repair on Office 2010
    Uninstalling and reinstalling the Sharepoint Workspace tool from the computer
    Verifying all updates are installed
    Reference:
    https://support.office.com/en-in/article/Resolving-conflicts-and-errors-in-SharePoint-Workspace-70928d16-1cff-4931-b693-f5e346a7bf99?ui=en-US&rs=en-IN&ad=IN#bm1
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Error while creating delivary document

    Hi
    i got error while creating delivary document
    "Delevivary documents could not be created"
    Thanks&regards
    kishore kumar

    Hi Kishore,
    Please check the sales order is this relevent for the delivery or not.
    Check the copy control settings between your sales document type and delivery document type in VTLA transaction.
    Check the incompletion log for the sales order.
    I hope it will help you,
    Regards,
    Murali.

  • Characterset mismatch error while export

    Hi,
    I am getting characterset mismatch error while exporting a schema.
    select * from nls_database_parameters where parameter in('NLS_LANGUAGE','NLS_TERRITORY','NLS_CHARACTERSET')
    PARAMETER
    VALUE
    NLS_LANGUAGE
    AMERICAN
    NLS_TERRITORY
    AMERICA
    NLS_CHARACTERSET
    AL32UTF8
    i have set nls_lang on OS level
    NLS_LANG = AMERICAN_AMERICA.AL32UTF8
    C:\oracle\ora92\bin>
    C:\oracle\ora92\bin>
    C:\oracle\ora92\bin>exp hrtemp_v6/hrtemp_v6@testdb file=c:\hrtemp_v6 statistics=
    none
    Export: Release 9.2.0.1.0 - Production on Mon May 14 11:55:58 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
    server uses AL32UTF8 character set (possible charset conversion)
    About to export specified users ...
    . exporting pre-schema procedural objects and actions
    . exporting foreign function library names for user HRTEMP_V6
    . exporting PUBLIC type synonyms
    EXP-00008: ORACLE error 6552 encountered
    ORA-06552: PL/SQL: Compilation unit analysis terminated
    ORA-06553: PLS-553: character set name is not recognized
    EXP-00000: Export terminated unsuccessfully
    please suggest , whats wrong here
    thanks & regards

    i have set nls_lang on OS level
    NLS_LANG = AMERICAN_AMERICA.AL32UTF8How and where?
    C:\oracle\ora92\bin>At this command prompt, what do you get back from "set nls"
    You can use
    c:\> set nls_lang=.al32utf8
    ...right before you issue exp command.

  • Crystal Report: Error while Export to Excel

    We are using combination of Crystal Report 10 With
    J2EE, Below source code is working fine While
    exporting to PDF, MSWord, RTF format.
    if(selectedFormat.equals("MSWORD"))
    exportOptions.setExportFormatType(ReportExportFormat.MSWord);
    if(iPageFrom>0 && iPageTo>0)
    RTFWordExportFormatOptions RTFExpOpts=new
    RTFWordExportFormatOptions();
    RTFExpOpts.setStartPageNumber(iPageFrom);
    RTFExpOpts.setEndPageNumber(iPageTo);
    exportOptions.setFormatOptions(RTFExpOpts);
    But am getting following error while exporting report
    to Excel
    com.crystaldecisions.report.web.viewer.ReportExportControl
    Invalid post back event : {0}
    We would like to know, Is SDK feasible for exporting
    to excel or not ?
    If yes! then Please suggest us for same.
    Thanks In advance :)

    I will make sure that I am on the latest patch ie SP4
    https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
    You can find the rumtimes here:
    MSI:
    https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
    MSM:
    https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
    ClickOnce
    https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
    Recompile the app and then deploy.
    What is the .NET Framework used by the application?
    Method of deployment?
    OS where app is deployed, x86 or x64?
    Are you able to export the report from designer ie CR2008 Standalone?
    - Saurabh

  • Getting error while opening Excel document from SharePoint site

    Hello All,
    I am getting following error while opening Excel document from SharePoint site.
    This issue appears when we open Excel document from Windows>> Run using below mentioned command:
    Excel.exe "{File Name}"
    If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
    I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
    Thanks,
    Amit Bansal
    Amit Bansal http://www.oops4you.blogspot.com/

    Hi Amit Bansal,
    Thanks for posting in MSDN forum.
    This forum is for developers discussing developing issues involve Excel application.
    According to the description, you got an error when you open the document form SharePoint site.
    Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
    SharePoint 2013 - General Discussions and Questions forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Getting error while uploading a document in a library

    Hi,
    I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
    It reads:
    The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
    How to resolve this ? I have referred many articles on this one, but none helped.
    Thanks for your response in advance.
    Regards

    Hi Prajk,
    Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
    If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
    http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
    If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
    If above cannot work, please check ULS log for detailed error message.
    For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Error while opening office document

    Hello Gurus!
    I try to use word intergation in WebIC (CRM 5.0). In "Create lead" trunsaction (CL_CRM_IC_ABOXSAMPLE_CR_LEAD class) I have Attachment tab. When I click "Create document with template" buton I get "Error while opening office document" error. In IE settings ActiveX is on. What should I do to make it work?
    Best regards,
    Artur.

    Hello Artur,
    Try this Note:
    Note 606745 - CRM Content Management: Document does not open
    It's not exactly for that issue but it may help.
    Good Luck
    Eli Steklov
    Please Reward Points if it Helped

Maybe you are looking for