Unknown Fault With My Battery

Heloo!
there is some issue with my battery .. its look like spoiled ....my battery i think there is six cell in my battery but one cell is just spoiled and it makes my battery damaged ..so please Tell Me why its happened ? this is factory fault??
Thanks n Reply me

Which model of MBP do you have iMacLED? Does it have a fixed battery or a removable one? Are you still under warranty?
Battery faults of this kind are far from uncommon in all electrical devices and not usually related to anything you have actually "done". If it is defective then take it to an Apple service centre and they will probably simply replace it for you.
Cheers
Rod

Similar Messages

  • Fault with my battery

    hey all,
    unusual problem with my macbook's battery. i've had my macbook since august 08 and it's performed fine without fail until now. i follow apple's advice on charging and looking after the battery, doing a monthly run down and recharge. last night i took my macbook away with me, full charged. i used it for about half an hour then shut it down. it was on 86% percent charge with 100% health and 75 cycles. this morning the battery was on 0% reading 14% health. it was completely switched off last night, so it can't have run down and it was kept it it's bag and hasn't been kicked or damaged. what could be wrong? i've tried to charge it up, it's jumped from 0% charged to 45% in 23 minutes and it says it'll be full charged in 18 minutes!! something it not right, please help.
    many thanks

    That certainly doesn't sound right. My battery doesn't go down to 86% after half an hour, and my MB is older than yours. I'd contact Apple tech support (you're still under warranty, if your MB was new in August) and politely tell them what's going on.

  • Unknown Fault (with example file)

    One of my collection columns gets mixed with another collection. I remove all screens, visuals and collection except  the mixed collection and visuals linked with that collection. But I get still columns from a collection what is already
    removed from my project in that one collection. I tried to reopen my project and also reinstall sienna but nothing seems to work. I really have no idea what else to do and I can't continue to work until this issue will be solved. Please help

    Hi Peter, 
    take a look at the Save button (Button16_1 in the "EditUsers" screen). Part of its OnSelect expression is: Collect(Emploee, ModEmp)
    As per the Siena Beta3 Function Reference (http://technet.microsoft.com/library/dn690139), this expression is using the table version of the Collect function. In other words, Collect takes the ModEmp table, extends the schema (think: column names) of the
    Employee table and inserts all rows from ModEmp into Employee table. Obviously this schema extension is necessary to copying properly, however sometime people are taken by surprise that more columns appear as out of nothing. 
    The solution often is to use the non-table overload of Collect as described in the Function Reference. It allows you to specify which columns to populate and thus not to copy stuff you don't need. For instance, you can do:
    Collect(Employee, {FirstName: First(ModEmp)!FirstName, LastName: First(ModEmp)!LastName}
    Hope this helps!
    Manski

  • Unknown fault (-50)

    I've a problem,
    I've a lot of songs in my iTunes, but after a while the most of this songs won't start and I can't do anything with them and iTunes shows the message that there's an unknown fault (-50).
    Ipod Mini   Windows XP Pro  

    Yes, b, but Drako isn't getting a -50 error when trying to open the library. There's nothing wrong with his library if he can get info on the songs and see all the metadata. There's something wrong with his files -- now the only time I've seen this error with AAC files is with a user who's files when you looked at them had random blocks of zeroes inserted in them, which meant something (something not iTunes) was either chewing steadily through his files (i.e. a virus) or he was losing his hard drive slowly but surely and his files were getting corrupted because the physical media was going bad.
    This doesn't offer a lot of hope for Drako, but if he sends a file to the Apple engineers they will be able to determine whether its a corruption or a bug.

  • Nx6325 charging led solid amber with no battery and wont power.whic​h motherbrd component is faulty?

    I have 2 nx6325s.one has developed a fault where with the charger plugged in the charging led flashs once green then goes solid amber with or without the battery connected.The laptop wont power on.The charger and battery are both good as tested on the other laptop.I suspect a component in the charging circuit has gone faulty.Would any one know which component I should look at and what to measure.
    Thanks 

    >If I remove the battery the laptop will not power on either and only when using a fully charged battery will the laptop power up. The battery icon shows it to be charging only briefly when I plug in. I've even tried another AC charger even though mine is good (tested) and also tested with another battery to no avail.
    Indeed, it sounds like something wrong on the motherboard it could be related to power supply electronic which is placed on the board power problems can be related to faulty RAM modules too so maybe you should check the RAM firstly remove one single module and try to power up the unit using one module in different slots
    Otherwise you would need help from a notebook technician... ;(

  • How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    Kappy wrote:
    Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
    When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
    Boot into Recovery (hold ⌘R on boot)
    Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
    Quit Disk Utility
    Then Select: Restore from a Time Machine Backup.

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • Is this an issue with my battery or something else?

    I'm aware that my battery isn't going to stay perfect forever and that over time the life of your battery will decrease but since researching about it on the Apple website and learning about Cycle counts I'm wondering if my issues are related to my battery.
    Recently my Mac isn't lasting anywhere near as long as it used to when running solely on battery power:
    Charge Information:
    Charge remaining (mAh): 1399
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4666
    Health Information:
    Cycle count: 184
    I know Apples magic number is 300 and as you can see I'm still pretty far off that but i'm maybe getting an hour and a quarter max out of my battery from full charge. Even if I just have one or two programs running at once (for example, Pages and Firefox) which to my knowledge shouldn't take up anywhere near as much battery as say, watching a movie.
    And that's just one of the issues. Also recently, when I put the lid down on my Mac and it goes to sleep it'll wake itself up repeatedly, while the lid is still down. It'll make that noise (which i think is the hard drive) and the apple logo will light up and then it'll put itself back to sleep again. Then repeat every few minutes until I lift the lid up. However it doesn't do this all the time.
    Another problem is if I leave it to sleep but leave the power on overnight (unplugged from a main socket) i'm aware that some of the battery will drain but only last night I closed it with 62% of the battery left and this morning it was 0% and I couldn't turn it on without plugging the charger in. It definitely wasn't doing it's waking up and going to sleep routine.
    One last problem which I presume has nothing to do with my battery is when I turn my Mac on from being completely off it'll come to the grey screen, make the 'turning on' noise and then take about 2 to 3 minutes before anything happens. But whereas the login screen should appear, instead I get a grey folder icon with a question mark inside, flashing repeatedly until I turn the Mac off.
    Normally a turn off and turn on again solves the issue but only yesterday it happened twice, one after the other before it would let me get to the login screen.
    Does anybody know what the problem/problems are, if my battery is damaged or if the issues are related or not?
    Thaks

    Well it sounds like you have a bad battery. I got mine replaced at about 80 cycles for free because it was holding only 87% of its charge, so you should be able to get a replacement free of charge too.
    As far as it waking up and sleeping, that is often caused by a external device. For example, if you have a USB mouse plugged in, every time the optical sensor thinks it moves it will wake up your system, then it will go back to sleep. Another thing may be a key on the keyboard being pressed when the screen in closed (if the key is being touched by the screen) causing the system to detect input and wake up.
    As far as the folder icon, that sounds like a potentially bad hard drive.

  • I've been having problems with the battery draining within half an hour of it being fully chargers. I have an iPhone 5c and haven't had it for long. How do I get the troubleshoot email to check it out? iPhone 5c

    I have been having issues with my battery capacity. The battery will drain within half an hour with it being fully charged when the battery normally lasts me all day. I haven't had the phone that long so it most definitely shouldn't be happening. I went to my service provider about the problem and he said to go into the apple website, click "support" and then "battery capacity issues" to which you then type in your email to troubleshoot the problem on your phones however, I cannot find this. Someone help me out!

    He may have been referring to: https://www.apple.com/support/contact/
    On the linked page, click "Get Started" then on the next page click "iPhone" then on the next page "Battery, Power & Charging" then "Battery questions or troubleshooting"

  • Fault with phone line cleared, but IP profile stil...

    Hi,
    Apparently there was a fault with my phone line (didn't seem anthing wrong to me), which had caused my IP profile to be dropped, although my connection had never dropped. So an Openreach engineer came out and did something down the road from my house. He called later that day (Friday) to say the fault had been fixed and that my broadband should return to normal after 3 days. Its now over 3 days and I'm still stuck at 2mbps.
     Download speedachieved during the test was - 1.91 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 2 Mbps
    System Up Time 201:57:13
    Port
    Status
    TxPkts
    RxPkts
    Collisions
    Tx B/s
    Rx B/s
    Up Time
    WAN
    PPPoA
    937740
    1332346
    0
    420
    5663
    78:43:14
    LAN
    10M/100M
    2043242
    1579859
    0
    2650
    453
    201:56:55
    WLAN
    54M/65M/150M
    1062059
    503669
    0
    951
    153
    201:56:58
    ADSL Link
    Downstream
    Upstream
    Connection Speed
    8128 Kbps
    448 Kbps
    Line Attenuation
    24.0 dB
    14.5 dB
    Noise Margin
    8.4 dB
    27.0 dB
    Could a mod help to get this reset please, or do I just need to sit it out and wait?
    Thanks
    J

    Once the Forum Mods have read your post they will post an invite here once you reply to them they will take personal ownership of the problem until resolved.
    Do not send them a Personal Message as this is the incorrect contact method and cannot be properly tracked also the mod contacted may not be on shift for sometime and this will delay your help
    The forum mods normally reply within 3/5 working days after you have contacted them
    They will contact you personally by email or phone  
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Macbook - Shuts down with low battery and doesn't go to sleep

    I have a Black MacBook 2.16 core duo and have been dealing with this same issue for about 6 months.
    At first, the MB (macbook) worked perfectly. battery would get to 5% or so, warn me then go to sleep, then write a safe sleep image, then shutdown. I would turn it back on and it would restore the image to where I left off.
    After about 2 months this stopped working properly. When running solely off the battery, the MB would get to about 20% and just shutdown. ppbbbbllltt!
    I've spent endless hours on the phone with people in the Phillipines and sitting at Genius Bars. I've gone through all the things mentioned in Apple's support thread: calibrated the battery, reset PRAM, reset SMC / PMU, updated the battery uupdater to 1.1 then 1.2 (I think that 1.3 is only for MB Pros)
    I'm on my THIRD BATTERY..it's happening again...at least with the first 2 it worked for a couple of months. With this battery, it bombed out on the first cycle that I went through.
    Is this the logic board or the motherboard or something else??
    Any other ideas on what to try?
    Is this a hardware issue (IE motherboard, logic board...) ?
    Is this a software issue (IE - OSX) ?
    Is it a firware issue (IE - battery firware) ?
    I'm at a loss....

    If it's your third battery you need to have Apple look at the computer itself. As you know now switching batteries is not fixing it. I would guess it is in the power control circuit which is on the motherboard. You need to call and get it checked out.

  • Waking from sleep with no battery and no keyboard action

    Hi there,
    Since this unfortunate battery recall, I'm now running my PB with no battery (as recommended) i.e. just the power supply. I have my PB configured to prompt for a password when waking from sleep, which it does. However my keyboard does not appear to be responsive for several seconds.
    Here are my steps:
    1. Close the lid. PB goes to sleep.
    2. Open the lid. PB wakes up and prompts me for my password.
    The mouse cursor via the trackpad is responsive immediately. However attemping to type in the password field does not yield anything. The PB then automatically goes back to sleep. I can then wake it again with the keyboard and start typing.
    The really weird thing is that with the battery installed, I do not have this keyboard issue i.e. my keyboard input is accepted immediately on the first wake up.
    I have reset PRAM but to no avail. Any ideas? I'd rather not live with this behaviour while I'm waiting for my new battery.
    Kind regards,
    Christopher

    Hi Chris,
    You will be pleased to know your not the only one experiencing this issue. Like yourself I am now running my Powerbook without the battery and have noticed that when waking from sleep both my keyboard and mouse are unresponsive for several seconds.
    This also happened to my friends 867Mhz Powerbook when he was having battery problems. It would seem they just dont like being run without batteries installed.
    Stu

  • My iphone 4s only charges to 96%  Is there a problem with my battery

    Is there a known problem with the battery life of the iPhone 4S?  I only have my phone a few weeks and the battery life is very poor.  I've made sure that there aren't lots of things running at the same time (and I'm not using iCloud), but need to charge my phone every night which I never had to do with my old iPhone 3.  In addition I have noticed that my iPhone never charges 100%, only 96%, I've tried discharging the battery totally and then recharging the phone just in case it's a calibration issue.  Should I bring the phone back to have the battery replaced?

    From the Apple site about the iPad battery ...
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Here is the article.
    http://www.apple.com/batteries/ipad.html
    If you are getting around 10 hours of use out of the battery you are probably fine at 98% and it may just be that the battery needs to be calibrated in order to see the full 100% on the indicator. Try the charge cycle and see what happens.

  • I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

    I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

    If your CDs are on your iPod/iPhone, they can be recovered from there,see this post:
    https://discussions.apple.com/message/11857427#11857427
    Your problem shows the importance of making backups.

Maybe you are looking for

  • Speedgrade crashes when I try to open project! Projects won't Direct Link from Premiere either.

    Speedgrade crashing when I try to open a project! Projects won't Direct Link from Premiere either - the menu option is greyed out and I cannot select it. I've installed and uninstalled Speedgrade, all all my Creative Cloud software is up to date. My

  • Read-only files and folders

    I would like to add ilustrations to mp3 files that I adeed to my iTunes library. However, some of the iTunes folders seem to be read-only. I tried to uncheck them but when I restart iTunes they are read-only again. Any advice ?

  • In need of a website builder software for my site.

    I am trying to find a website builder type software i can upload to my site so members can alter a community website themselves. Can anyone suggest a site that sells or supplys a demo that i can use to see if it is what we need. Thank you in advance

  • Change af|train::stop-icon-visited_hover in PS6

    Hi: I am using PS6. I want to change the train icon to be our custom icons. I found that I have problem getting rid of the background image in the css class: .af_train_stop-icon-unvisited:hover and .af_train_stop-icon-visited:hover I tried to select

  • Resource semaphore troubleshoot

    Hi Resource semaphore Problem is coming in the SQL Server 2008 ....  For this troubleshoot I am not able to do Insert and Update In the SQL Server 2008 ... Please help... Thank You