Unknown file, adi.pb.lck

Found a file named, adi.pb.lck, in a folder labeled "adi", inside my shared folder, and have no idea how it got there or what it's for.
Anyone know what this is, and if I should delete it?
Thanks for your help

My guess is it's from iTunes -- there's a similar file on Windows at C:\ProgramData\Apple Computer\iTunes\adi\adi.pb
Source: http://pastebin.com/EejL5***
Or it's related to iBooks or the Mac App Store. See this post: http://galvanist.com/post/66313155502/users-shared-adi for more details.
That's all the info I was able to find. I'm on 10.6.8 so it isn't just a Lion/ML/Mavericks/Yosemite thing.
Personally I'm just going to leave it there at least for now.

Similar Messages

File Error:Unknown File.

I am getting a "File Error:Unknown file" when i try and save my project. So i am not able to save any changes i make to my project. any thoughts?

Try FILE>Save Project As.
does that work?
Shane

"File error: unknown file" upon movie import

Got a DVD. Extracted the footage with Mac the ripper. Created an mp4 file with Handbrake. It plays fine in Quicktime at 720 by 480 and 23.98 FPS. I've tried importing it into FCP and I get the error, "File error: unknown file". FCP sequence presents are 24 FPS...I've also tried switching it to 23.98 FPS. I've re-encoded the movie in Quicktime to a .mov file with "DV/DVCPRO - NTSC" compression and it still will not import. Any suggestions?

Tried making an AVI in Handbrake. Handbrake just froze everytime and it would never finish.
I should also note that FFMpeg did not like the footage either and would not convert it to a file of any kind.
So I put the DVD into a consumer DVD player and used my Panasonic DVX100B camera to record the footage in VCR mode. The tape turned out fine.
BUT...
I am trying to capture the footage from another low end Canon camera. Usually there is no problem. However, with this particular footage from this cursed DVD, I get a "general error" when I try to capture the footage in FCP.
No matter what file format or media is used, this footage will not import into FCP. It must be watermarked to not like FCP.
Any further suggestions???

File Error: Unknown File when trying to render a Motion Lower third

I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
Joe

What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

File Error - Unknown file when trying to import from HDD camera

I recently purchased a Panasonic SDR-H80 and am trying to get my widescreen footage into FCP. I converted the .MOD files to .m4v files in Handbrake, and they play and look fine in the Finder. However, when I try to move them into FCP, I get a dialog that says "File Error - Unknown file." I'm not sure what I'm doing wrong here. Can anybody help?

I converted the .MOD files to .m4v files in Handbrake .... I'm not sure what I'm doing wrong here
What you're doing wrong is using Handbrake and trying to use .m4v files in FCP. Neither is the correct process in preparing for editing.
Try using MPEG Streamclip and a format that actually works natively in FCP. .m4v is a final delivery format- not for editing. A search on this forum would have revealed that to you in a matter of seconds: http://discussions.apple.com/search.jspa?objID=c206&search=Go&q=handbrake
-DH

File Error: Unknown File, Cannot Save

I hope this is only a matter of healthy file management, but I'm quite confused and hope someone can clear this up into something of a simple science. On the otherhand, could this be a LIMITATION of FCP?
-Have been editing a sequence from a larger film on a second computer. That sequence has been worked on over several days and saved (of course). However, upon saving last night, was an error message: "File error: Unknown File" and the project could not be saved.
-This is quite possibly due to the fact that both the media and project files have been copied over the network to the first computer where the master project is being assembled.
-HOWEVER, no media files claimed to be offline, everything was editable AND the FILE WOULD NOT SAVE through multiple attempts
-ALSO, the other open project WOULD NOT SAVE either (its files where never moved or otherwise tampered with. It was a small and entirely local operation).
-SAVING was finally accomplished ONLY by saving the project file to the LOCAL HD rather than the EXTERNAL DRIVE where the MEDIA and PROJECT FILES originated and had been previously saved to.
-All other attempts to save to the EXTERNAL were met with the message "FILE ERROR: UNKNOWN FILE" This compromised saving process resulted in the loss of all work, edits, etc. on the LESSER and EXCLUSIVELY local project.
-AFTER saving to the LOCAL HD, the project COULD BE once again saved to the EXTERNAL HD. This flow seemed very strange to me.
-Has anyone else encountered this problem, and what can I correct in my processes to avoid this.
--*Also, the First computer encountered the same problems at the same time, after both EDITING & SAVING had taken place since the last FILE COPYING. Again, work was lost.
Thanks for any help you can offer.
G5 Dual 2 GHz PowerPC Mac OS X (10.4.5) 1.5 GB ram

Do people search this forum at all?!?
Check your project for CMYK files.
Search this forum for General Error.
This was discussed about 90 minutes ago.

File Error: Unknown File when saving

I tried to save my project to the drive I've been working in and saving all day. And all of a sudden Im getting a new error: File Error: Unknown File. What's that all about? It saved fine to another drive.

km@ms, Welcome to the forums.
You have posted in a topic started by someone else in the pro video discussions.
While someone here may well have an answer for you, it would be far better to ask your question as it's own topic. As a rule, you will receive an answer much sooner.
Here is a link to the general discussion category for Mac OS X 10.4:
http://discussions.apple.com/category.jspa?categoryID=177
Here is the link to the "Pages" forum. http://discussions.apple.com/forum.jspa?forumID=1191
While your issue is unrelated to that software product, you stand a better chance of finding someone familiar with Quark and .eps files there.

File Error: Unknown File - when doing save as

yet another variation on the file problems i am having.
opened an aotosave file and tried to 'Save project as",
wont do it, reports "File error: unknown file"
the same error i get often when trying to "save as" the original,
and the same error i get if i make a copy of the FCP file in the finer, open it and try to save it, it wont do it.....
so with the main sequence in my project getting lost ("not found"),
i now find that its almost impossible to make a backup that works....
anyone know about this SERIOUS FAULT.
i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
new computer, new drives, new everything..
i am now working really scared, when it loses the main sequence again (1 hour), the latest backup that might work could be anything from 1 - 5 days old, who knows, and there goes days of work...
======================================
FCP6
HDV captures.
Main sequence is prores render.
Files and media on one 750G drive in the Mac Pro box.
deleted all render files yesterday, now only about 15 there.
changed MP3 tracks to aif.
have done FCP resue often
have done permissions
have upgraded to 10.4.10

i now find that its almost impossible to make a backup that works....
anyone know about this SERIOUS FAULT.
i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
new computer, new drives, new everything..
Except that this issue is almost always totally unrelated to FCP at all.
Paulo has dome great anecdotal advice but this is usually a fiel permissions problem. No idea how it gets changed but you can run Disk Utility and repair permissions. Do it twice. then Get Info on your drive and see what the privileges are. Do the same for your FCP projects folders. Get info on your FCP project file itself.
You need to get this figured out before you invest any more time in editing.
bogiesan

File Error: Unknown file. - Importing problem

I recently had some problems getting my FCP 5.0.4 to launch. To make a long story short someone in this forum said that my version of FCP was out of date with my current Macbook Pro running 10.5.5. I found this a little odd because I've had this computer for over six months and have been running FCP the whole time without a single problem. Since funds are tight and I don't have the money upgrade I did some troubleshooting to see if I could make it work again.
I did remember that I had recently moved some of my older quicktime codecs into my library/quicktime folder and when I removed them I was able to launch and run FCP.
Now when I try to import files I'm getting a "File Error: Unknown file" error message. I am able to view all the quicktimes and am only able to import a few quicktimes. I have quicktimes from the last six years that I'm trying to import so there's a good variety of different codes that were used. But I am able to watch all of the quicktimes via Quicktime.
Any suggestions why I might be getting this problem? Any way to fix this without upgrading? Thanks

*I recently had some problems getting my FCP 5.0.4 to launch.*
The reason is because that version of for PPC Macs, and you have an Intel Mac.
*Someone in this forum said that my version of FCP was out of date with my current Macbook Pro running 10.5.5*
It doesn't matter which OS version is running. You need an Intel/UB version of FCP to run on a Intel Mac.
*Any way to fix this without upgrading?*
It's not a problem. It's an incompatibility. Because you have run it for some time without an incident is incidental to its incompatibility.

"File Error: Unknown File" when rendering

Hi,
When attempting to render any clip I get a "File Error: Unknown File". Help?
I'm using FCP 6.0.5 with video content from a Canon consumer HD camera.
Thank you,
Tim Moore

switch the location of your render files and see if that helps. I had this happen week before last and it drove me crazy (crazier) I switched scratch disks and met deadline. Now it all behaves like it never happened. some bit stuck somewhere, that took the machine being off for a while to cure

Unknown File Format Error while Uploading file through SFP in Note Implemen

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing the manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Unknown File Format Error while Uploading file through SFP

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Unknown File Type for Adobe Classroom in a Book Fireworks

I am trying to open sand_river1.jpg cited on p. 74 of Adobe Fireworks Classroom in a Book and am getting a "Could not open file" and "unknown file type" despite the fact that the image is displaying as a thumbnail in the file browser. I get the message on both Windows and Mac Fireworks CS6. Is it possible these publication assets were not part of Adobe's QA regression? Anyway:
- I'd rather not try to fix this myself since it's an Adobe product and I can wait.
- has this problem been corrected?
- is there an errata site for the book? When I search on Google I am just sent to Amazon and bittorrent.
thanks

A quick Google search for that file name confirmed the issue here, and a fixed version for chapter 4 can be downloaded at http://www.jimbabbage.ca/_files/ch4files.zip
Source: http://blogs.adobe.com/edtechatadobe/2012/06/652.html

Unknown File, Out of Memory

When opening my project sequence across a gigabit Ethernet connection to an Xsan, I first get: File Error: Unknown File, followed by: Error: Out of Memory.
The Sequence is full of Jpegs, Tiffs, and some 10-Bit Uncompressed. How can I get to view this project..?
Si

As mentioned above, picture files, such as jpegs require RAM in order to playback. You mentioned you have a lot of TIFFs and JPEGs in this project. I'm still willing to bet that is exactly what is causing the Out of Memory error.
Sure, you can copy files over the same network with great speeds, but try taking all of those jpegs and try transferring them simultaneously. I doubt you'll get great speeds doing that.
You could have your editor use the Media Manager to copy the project to an external drive.

Unknown file format when downloading map loader?!?...

I downloaded nokia maps from the nokia website and then nokia map loader but for some reason a get a message on my n73 saying that the nokia map loader is an unknown file format...can anybody tell me what to do??

I assume you're trying to install the map loader on your computer and not on your phone
If you can't get map loader to work, you could try this map loader alternative: http://nokiamaps.moo.no . You don't need to install anything for that.
symbian programs & themes, nokia maps for any browser on any operating system of your choice, and other tricks to tame symbian: http://symbian.site666.info

Unknown file, adi.pb.lck

Similar Messages

Maybe you are looking for