Unknown file format when downloading map loader?!?...

I downloaded nokia maps from the nokia website and then nokia map loader but for some reason a get a message on my n73 saying that the nokia map loader is an unknown file format...can anybody tell me what to do??

I assume you're trying to install the map loader on your computer and not on your phone
If you can't get map loader to work, you could try this map loader alternative: http://nokiamaps.moo.no . You don't need to install anything for that.
symbian programs & themes, nokia maps for any browser on any operating system of your choice, and other tricks to tame symbian: http://symbian.site666.info

Similar Messages

Error occurred when uploading file (unknown file format) in t.code SFP

Hi,
According to SAP Note 1465628 - ESI Limit increased and length of temp. ESI no increased, when we are doing Step 4. PDF form changes (valid for ECC 6.0 and above)....and point (i)...in transaction SFP (From - HR_IN_ESI_005_99), system shows the below message.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Plz guide..

Hi Anil,
Refer following links :
Re: Adobe Form assignment
Adobe Uploading form error unknown file forma
Hope this will help.
Regards,
Vivek

My raw files go to unsupported file format when I load them in. Sony RX 100 had for one year. Never happened before.

my raw files go to unsupported file format when I load them in. Sony RX 100 camera shooting RAW had for one year. Never happened before.
Can only load the files in by running them trhough Adobe Camera RAW first and loading them as TIFFS into Aperture. JPEGs form the Sony load into Aperture just fine. Have repaired datebase, permissions ect but no change. Aperture 3.4.5 on a Power Mac. Whats up? Anyone know?

You mention that 'most' of your files are DNG. Try
running the effected files through Adobe DNG
converter again and then import your reprocessed
files to Aperture and see if the problem persists.
I had a problem with a batch of D2x files converted
to DNG which had been metadata tagged by
PhotoMechanic (the evil app).
B.T.W. You mention that you had been using Bridge.
Are you getting any of the embedded XMP metadata
coming into Aperture during the import process?
Already tried that multiple times...no luck. I'm wondering though if it might be related to metadata as you suggest. I'm still trying different things to see what happens.
I was able to alleviate the problem on one set of images by painstakingly searching my external drive for the oldest backups I could find - CR2 files from before DNG conversion. I then ran those through DNG Converter and tried importing them again (this time, I embedded NO thumbnail, but I'm not sure if that made the difference - I think it was more likely a fluke in the original conversion that caused the problem). This time, it worked.
Now, the big problem is that I still have a couple hundred images for which I can't seem to locate the original CR2 files. I don't typically keep them after conversion, as I don't have the space for both.

Unknown File Format Error while Uploading file through SFP in Note Implemen

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing the manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Unknown File Format Error while Uploading file through SFP

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

"UNKNOWN FILE FORMAT" on N70

Hi friends
I've downloaded few games with with following file formats on my N70: JAR, RAR and JAD. When i try to open or install them I get an error message "Unknown File Format". What can do to resolve this or is there a software that i must install so it can read those files.
Please help

you can use:
1.Handy Zip
2.Zipman with .rar plugin
3.Xplore File Browser
etc..etc..
google each one of them to download.But,if you arn't getting them i'll provide you the links.
Was this post of some help? Click 'Kudos' star on the right hand side of this post. Your gesture will be highly appreciated!

N73 Error Messaging: Unknown File Format (-12003)

Hi,
Could someone please tell me what is the below error message for in N73 Phone?
Messaging: Unknown File Format (-12003)
I received a bluetooth attachment of a ".avi" extension. When i try to open that message in my inbox, it gives me the above error. I have a software "SmartMovie" which can play ".avi" files installed on my phone. So i don't understand why this error ?
Is it possible to configure the file types like avi to an application in N73 ?
Please let me know..

SHort answer is you can't.
If you can save the file to the phone you can download the dvx player from http://mobile.divx.com and then open the AVI file with the DiVX player. But you can't add AVI as a recognized file type (at least I haven't found a way).
640K Should be enough for everybody
El_Loco Nokia Video Blog

Unknown file format error in studio mx

Help! I am using Flash in the Studio Mx Professional suite
and I cant open a .fla file. It tells me that its in an 'unknown
file format'.
But the file does open when I used my school's Flash 8
program. Please tell me they didnt design the Series 8 programs so
they werent backwards compatible with the Mx series!!! Im so
agitated right now...sorry. So if there is a hotfix or any easy
solution that wont make me scream, please post!

PyaNo;
You seem to be describing "forwards compatibility" rather
than
backwards--not many applications do that... Flashmx (version
6) cannot open
fla files saved from flash 8.
Fwiw flash can "downsave" fla files one version back--flash8
> flashmx
2004 (7), flashmx2004 > flashmx. -Tom Unger

Unknown file formats

I'm a silver haired N70 owner trying to keep the grey matter active! I get a lot out of my N70 (I think) but one problem always bugs me. If I try to open a file in FExplorer I often get the message "Unknown File Format". Why?

In your phone (in the Symbian operating system), a file type "handler" is registered as a special type of a program called a "recognizer", which knows what to do with a particular file.
If there is no recognizer for the file, then you get that error.
In other words, FExplorer asks the operating system to launch whatever program knows about this file, and the operating system is saying: "I don't have any registered programs that knows how to handle this type of files, so I don't know what to do with it".
Now, of course, the operating system is saying this through the error message "Unknown File Format", but what it means is what I wrote above.
Of course, it doesn't mean that there are no programs that know what the file is for. Just that there is no system-level recognizer for it. The program that "owns" the file can still know what it is for, and do whatever it does with it.
There is also a chance that the file was, for example, downloaded from a PC, the Internet or wherever, and it contains something no program on the phone knows what to do with (e.g., some unknown video file format, or whatever).

Nokia 6600 unknown file format for mp3 files

when i try to open my mp3 files it just says unknown file format and wont let me open the file,how can i fix this problem?

please mention the phone model number, the type of file which you are trying to open on the phone & the problem you are facing in more detail.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

How to validate the file path when downloading.

Hi
How to validate the file path when downloading to Presentation or application Server.

hiii
you can validate file path by following way
REPORT zvalidate.
TYPE-POOLS: abap.
DATA: w_direc TYPE string.
DATA: w_bool TYPE abap_bool.
w_dir = 'c:\Myfolder\'.
CALL METHOD cl_gui_frontend_services=>directory_exist
EXPORTING
directory = w_direc
RECEIVING
result = w_bool
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
wrong_parameter = 3
not_supported_by_gui = 4
OTHERS = 5.
IF NOT w_bool IS INITIAL.
WRITE:/ 'Directory exists.'.
ELSE.
WRITE:/ 'Directory does not exist.'.
ENDIF.
regards
twinkal

Problem in finding and downloading Map Loader

Hello, i am using N97 mini, i updated the map to OVI free navigation map,
but i want to use the navigation without internet conncetion and for that i need to download the map and save it into my device.
But the problem is i cant find the correct link for Map Loader, please suggest and advice,
Please check the url befor suggesting it to me because i tried many URLs non are working for downloading MAP LOADER!
i have downloaded OVI Store & PC Suite software, but cant find the MAP LOADER software...
Thanks and regards,,,
Talal Baig
Solved!
Go to Solution.

If you have Ovi Suite, you dont need map loader. You can even install PC Suite. Its unadvisable to have them both on the PC
Connect your device to your PC and Ovi Suite. Right click on the bottom where it says connect new device. Follow the prompts. Then select View>Go to>Maps. Select the maps and voice you want to download.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh). First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there. Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud". 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

Interesting response, Kappy - Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook). Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud". W/ 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
You can safely assume that I have tried using it!   So, to make things a little clearer:
     1) I now have two iCloud "contacts files", w/ a different total count. What's the difference? Why the different toatl count?
     2) Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. What's in those files? And where are they?
Probably more important questions get down to:
     3) Why is a basic Apple product upgrade "screwing-up Outlook"? This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle. Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
     4) And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
Thanks again for your interest and comments. - Russ-AZ

Nikon D60 RAW (NEF) unknown file format

I just got my Nikon D60 and would like to use Aperture 2.0 to open NEF for processing but the application reports it as an unknown file format...
Will Apple add support for the D60 or am I SOL?
Thanks!

With every new camera, all software developers have to add something to their code to recognise the new raw format. Adobe as the biggest kid on the block is often the fastest but even Adobe might take a month or two (or three very occasionally), since they don't release a new version of ACR every week.
As soon as Adobe supports it, you can use the free Adobe DNG converter to batch convert your images to dng files and then use them in Aperture.
And yes, it is almost a given that Aperture (and OS X) will support the D60 in a few months at most.

Multiple unknown files created when working in Illustrator CS4 on Windows 7

Hi there,
If this has been addressed before, I apologize. I've been googling and searching this forum for a mention of this but haven't been able to find anything.
Whenever I'm working with a file in Illustrator, multiple unknown files are created. When I close Illustrator or reboot my computer, they remain. They have no file extension and their file size is almost always in the same range. In the screenshot below, each file ranges from 7MB to 7.99MB. I've previously had 100+ 14MB to 14.99MB files created. They can be deleted with no consequence.
I'm currently on the most recently released Windows 7 build that you can download from Microsoft's Website. This problem seems to only occur with Illustrator.
Any help would be greatly appreciated. Thank you!

Either auto-save files from Illustrator or some sort of security backups created by the operating system for indexing purposes while the main file is still open. Check the respective prefs in AI and possibly your indexing settings in W7.
Mylenium

Unknown file format when downloading map loader?!?...

Similar Messages

Maybe you are looking for