Unknown Form Type while saving

I am working on Devloper 2000 and developed a form for transfering data from SAP server to SQL server. The form is working fine.But I have one problem that while saving the form as <form name>.fmb it is saved as devloper form of unknown type and give no error message.The standard icon of fmb file of saved form also does not exists but has icon which is not known by the PC.And while opening that form again after saving it asks for the software option with which it has to be opened.
Pls advice what to do..

oh no. That's such an old version. Try install a forms 6i and open/save the forms there - only for testing the save-functionality

Similar Messages

  • Changing adobe forms name while saving

    hi,
    i have made an application in which i am generating pdf form but while saving a default name 'f' is appearing which i need to change. I am unable to change pdf form name.
    Plz help.
    thanks

    I have no solution for you but this forum is related to FPM discussions. i am not sure you posted in a right forum.
    requesting moderator to (re)place this to right forum.

  • How/ where to  check output type while saving sales order for confirmation

    Hi All,
    Could you anyone pls let me know How/ where to  check output type while saving sales order for confirmation.
    Present scenario : when the Sales Order is created the Order confirmation is sent irrespective of credit block of the sales order.
    Requirement : Order confirmation “ZA00” sent to the partner only for those Sales orders which does not have credit block and ZCLE sent to the partner if the order has credit block.
    Now i want to know where exactly to check the output types "ZA00" and 'ZCLE' based on the credit block to send the confirmation to partener.
    Quick help highly appreciated......
    Preetham

    Hi Santosh,
    Thanks for the info. But here in this case I have to send the confiramation based on credit limit check. If credit limit check exceeds "ZCLE' should go as confirmation else 'ZA00' should go as confirmation.
    Where can we check the credit limit whether it exceeded or not. My doubt is whether it is config issue or do we need to write code user exit or routine to send the specific output type for confirmation.
    Thanks & Regards,
    Preetham

  • Error while triggering program through output type while saving invoice

    Hi,
    I have a scenario where in my Z program needs to be triggered when saving a invoice.
    For that we have attached out Z program to output type which gets picked while saving invoice.
    In the Z program we have written the entire code in Form Entry subroutine.
    In the Z program we have called a FM "SD_SALESDOCUMENT_CREATE", to create a sales order.
    After sales order is created we have used a Commit statement.
    If I run the Z program individually, Salesorder gets created perfectly.
    How ever as per scenario when trying to save the invoice, output type gets picked. But program doesn't get called.
    and when I go to the saved the invoice I get the following error immediately:
    "Error document - Update was terminated"
    I have found that the problem is with COMMIT statement through transaction SM13.
    Can anybody help me with this. I cannot save the sales order without COMMIT, so I have to use it.
    Thanks in Advance,
    Rohan.

    Hi Rohan,
    I have worked on almost similar kind of requirement as you. 
    "Error document - Update was terminated" is because saving of invoice is done in u201CUpdate Tasku201D. Again in that work process, FM also calls for update task, which is not allowed and give short dump.
    Here are two different approaches to cope up in this scenario.
    1.Call FM in NEW TASK.
    Calling Function module in new task will assign new work process and will use different update task.
    Use:
    CALL FUNCTION 'SD_SALESDOCUMENT_CREATE' STARTING NEW TASK 'task'
    This will not give update termination error.
    Call of FM in this way will work, but as this will be asynchronies call you will be not able to get status/message out of the FM call result.
    If capturing return message is mandatory, use below approach
    2, Process output type via Job
    Set output type, dispatch time u201CSend with periodically scheduled jobu201D in u201CDefault valueu201D tab.
    Run batch job for program u201CRSNAST00u201D with appropriate variant.
    Please let me know if you need any further details.
    Best Regards,
    Nisarg

  • Is a Form locked while saving is in progress?

    Hi,
    Is there a way to advice a user to not switch to another page while a form is saving? Or can I create a pop up form to appear while saving is in progress?
    I have observed that while a form is being saved, while the user switched the form to another page, the progress of saving the first page is locked causing the server to not respond anymore, CPU usage reached the maximum available resource.
    How can we avoid such?
    Thanks.
    Edited by: Nozume on Aug 17, 2010 2:36 PM

    You could certainly look into using a simple piece of custom javascript that will display an alert message once a form has been saved.
    First place to start is :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/apa.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Email Output type : No Automatic trigger of output type while saving doc.

    Hi Gurus - To trigger an email from the output type, I've configured a output type with medium as 5(external send) with communication strategy and created condition records with medium as 5 to trigger immediately.
    While creating corresponding document, the output is not automatically determined, it required to manually feed the output type every time. Can you please provide if any settings were missed to trigger immediately!!
    In Output analysis showing a message as "No print data determined for the communication strategy"
    Steps:
    1. Configured the output type with Medium as"5" and associated partner functions.
    2. Created the condition records with medium as 5 and trigger immediately.
    Thanks,
    Sree

    Hi ,
    while maintaining condition record for output type when you click on communication method, give logical destination as 'LP01'.Hope this will solve.PLease let me know if you have any issues on this.
    Thanks and regrads,
    Rajeshwar

  • A particular form hangs while saving in Oracle Apps 11.5.10.2

    Hi Friends,
    I am using Oracle Apps 11.5.10.2 on Linux.
    In a custom Responsibilty ,In a particular form after entering the valuses when i give confirm button the application forms hangs for a long time without saving the values.
    Please let me know the Fix.
    Regards,
    Arun

    Hi,
    Was this working before? If yes, any changes have been done recently?
    Can you find any errors in the Jinitiator Console Window, application log files, and the database log files?
    Please verify that you have no invalid objects in the database. Also, try to generate the form via adadmin and see if this helps.
    In none of the above helps, please obtain FRD file, and see if more details about the error are reported in the log then -- See (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i) for details.
    Regards,
    Hussein

  • Unknown error occured while saving CS2

    I'm using Windows Xp with Service pack 1.
    I have Ilustrator CS2. When I save, an error message pops up saying "An unknown error has occured." Then after that if I try to change something in the illustration, it says "Not enough RAM memory," which makes no sense. The program has worked for me when I had a different download;I don't know where I got it from but it's gone and it was a Trial version--When I opened that one, I had to go to Windows > Color, Tools, etc. because it had no windows up. Anyway. I don't think it's a printer issue. And I have no idea how to delete or move the preferences/settings. When I click the CS2 folder, it doesn't say Settings ANYWHERE. I've seen people suggest that but no one says how to do it. They just expect you to know for some reason. This really gets my goat and it just doesn't make any sense.

    Preferences > Plug Ins & Scratch Disks ( you can select up to 4 sources or drives starting with your startup drive ).  You found Web Settings, but what you want is Illustrator Preferences ( should be found in a source file titled Preferences on you C Drive ).  You may or may not have to delete the Preferences file which will automatically be rebuilt at default settings upon restart.  Your RAM requiremnts may be as low as 256mb, but that is just a starting put.  You need enough RAM to run your operating system and peripherals, as well as other apps you want open the same time you have Illustrator open.  Deleting the Illustrator Prefertences file may not be necessary in your case.  Setup the scratch disks first.

  • Error occured while Saving The Project

    I have a project that is giving me a 'unknown error occurred while saving the project. Select 'Save As' from the file menu and save the project to a new location'.
    It would seem that maybe it's saying that it's out of room but I'm saving on a harddisk that has over 1T of space left. I tried to do as they said and create another folder and save in a new location but  it gives me the same error.
    Has anyone dealt with this.? I have a wedding project that I can't make any changes to. It was doing this before and after I updated to Adobe 4.2.
    Using:
    Adobe Premiere Cs4
    Matrox RXT2
    6 Rams of memory
    4T system
    Windows Vista 64 Bit
    Nividia GEForce 9600

    Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
    Good luck, and please report your findings,
    Hunt

  • FRM-92010 Error while saving a form in HRMS

    Hi,
    I created a new 12.1.1 instance and impletented HRMS as per doc id#145837.1.
    Applied patch 8934107, Ran DataInstall and hrglobal.drv.
    Now while saving the forms we are getting the following error: (in application.log)
    10/05/13 18:12:03.269 formsweb: Forms session <1> aborted: unable to communicate with runtime process.
    10/05/13 18:12:03.270 formsweb: Forms session <1> exception stack trace:
    java.io.IOException: FRM-93000: Unexpected internal error.
    Details : No HTTP headers received from runform
    at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    I have also applied patch 8682249 as per doc 867501.1 (since error was the same) but still no luck.
    Please help.
    Regards,
    Neeraj
    Edited by: user556153 on May 13, 2010 6:19 AM

    Hi;
    Did you checked
    Queries Error With FRM-92101 In Many NLS Forms [ID 443922.1] << seems similar error like yours
    Forms FRM-92050, FRM-92100, FRM-92101, FRM-92102 Reference Guide [ID 444690.1]
    If its not help please enable trace
    How To Perform System Tracing For All Forms Runtime Processes? [ID 400144.1]
    Regard
    Helios

  • Update LIKP table while saving the output type in VT02N transaction

    Hi All,
    I have a requirement where i have to update Delivery Priority(LPRIO) field in LIKP table while saving the output type in VT02N transaction. I am not able to use the BAPI "BAPI_OUTB_DELIVERY_CHANGE" or FM "WS_DELIVERY_UPDATE" because, when we save the output type the programs that are configured in NACE are triggered in update mode and hence i will get a roll back error.
    Let me know other ways of updating the table at the time of saving output type for shipment transaction VT02N.

    This could be a result of one of the following reasons:
    1: Incorrect smart form/routine assigned in the output configuration (NACE)
    2: Serial number range of the delivery expired
    3: The default settings of the user (SU01) processing the delivery is missing the default printer name.
    Hope this is helpful
    Manish

  • Error while saving data form in planning

    Hi,
    We are getting the below error while saving the data form in planning
    "There was an error during the save process"
    i believe our form is not exceeds 255 columns we were able to access the same form till yesterday
    can any one please help me on this

    One reason could be that the blocks that you are trying to save are locked either through excel-addin or someone else might be updating the same combinations. I have encountered such issues earlier and got the same error. Check if there are any locks in essbase while you are saving the planning data.

  • Error in sharepoint 2010 designer while saving:"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see the results of the save? "

    Hi, 
    I am doing development  in sharepoint 2010 and facing this very weird problem.
    If I create a site page with the sharepoint look and feel for that site and try to save the site page,i am getting this error:**"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see
    the results of the save? "** and when i say reload,the server removes some parts of my page, e.g onclick event of html,asp buttons.
    This error just comes for any sharepoint site page,e.g i took a copy of 'How To Read Library' page just edited the text part of taht page,and when i try to save this error again comes up.
    However,if i create a simple aspx page with only htmltags like head body,then thr is no problem ,everything works great. But sharepoint look and feel pages are giving troubles while saving.
    has anybody seen this earlier,what could be the reason for this?
    Thanks

    I think the excerpt and link below is the why, but the page talks about server code and not javascript.  I guessing that this is why blank pages work, but not wiki pages.  Can anyone verify this?
    The following are general rules for using server-side code on a site page.
    If the page is uncustomized, server-side code is supported on the page.
    If the page is customized, server-side code does not run, and the page does not render. This includes the code-behind for the page itself.
    http://msdn.microsoft.com/en-us/library/office/aa979592(v=office.14).aspx

  • Form Builder crashes while saving .fmb file when connected to db

    Hi,
    I am getting error The instruction at "0x679c352c" referenced memory at "0x0000001c". The memory could not be "read".
    Forms version is 6.0.8.11.3 and database version is 10.2.0.3.0
    I am doing the following steps:
    1) Open .fmb file in forms builder
    2) Connecting to database
    3) Making some changes in form
    4) Compiling (Ctrl+Shift+K) and generating form (Ctrl+t)
    5) Saving form <--- Here I am getting the error and form crashes
    If I do not connect to database then builder is allowing me to save the file
    1) Open .fmb file in forms builder
    2) Making some changes in form
    3) Saving form (Successful)
    I did some exercise just as a guess that may some part of the form is causing this error. I full expanded all components of the form i.e. blocks, canvases, triggers etc.
    This exercise produced that 3 program units were giving same error while full expending those. I deleted those 3 program units and re-created them. Now it is not showing me this memory error while full expanding all program units. I can now fully expand my full form.
    But I am still getting this error while saving the changes when I am connected to database.
    Please help.
    Regards,
    Edited by: rawat75 on Sep 2, 2011 7:13 PM

    Hi Experts,
    We are getting the same issue. Our form builder crashes once we open our custom form
    in form builder.
    Server shows:-
    Forms 6.0 (Forms Runtime) Version 6.0.8.28.0 (Production)
    Form Builder shows:-
    Forms [32 Bit] Version 6.0.8.11.3 (Production)
    How to upgrade the form builder version?

  • Getting special character while saving adobe form from portal

    Hi All,
    I am getting Special character while saving adobe form. I am using webdynpro java application, in which I am using download file UI element.We are facing this issue after support packs were implemented in staging system.
    Kindly advise.
    Regards
    Shashwat

    Hi,
    We have ABAP system as backend system seperately and Single sign on is configured.
    when we access the portal with domain name line http://hostname.domain/52000/irj/portal, we are able to access the adobe form which is develope on abap system without any issue.
    but our issue started when we are trying to access portal only with hostname as http://hostname:52000/irj/portal
    we are able to login to portal but when we are trying to open the adobe form we are getting error
    No switch to HTTPS occurred, so it is not secure to send a password
    Since you have configured SSL, I assume that this configuration is done with fully qualified hotsname. Hence the certificate is generated based on this hostname.
    Now when you access your portal without typing fully qualified hostname, system is unable to locate a relevant certificate. Hence it lands up with a message "No switch to HTTPS occurred, so it is not secure to send a password"
    Hope this answers your query
    Regards,
    Deepak Kori

Maybe you are looking for