Unknown icon - yellow envelope LOOK with a "1" located on the left PLEASE HELP!
there is an ICON that looks like "yellow envelop and there is a letter"1" LOCATED on the LEFT"
BUT i dont have any unread SMS
how can I GET RID of it?
thank you
If you have email and sms separated, then it's possible to have an unread email that doesn't show up under the sms folder. Check your "Messages" folder. Also, when in Messages, hit the menu key and select "View Saved Messages." Make sure you don't have an unread message in Saved Messages.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Similar Messages
-
What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...
If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
B-rock -
my iphone suddenly stopped working. only apple icon is showing blinking once for every 10 to 15 seconds. Itunes is not recognising my device on my lap top. I can not do anything. please help me.
How did you get the VMWare sync to work? I hate Apple at this point.
-
HT1212 iPad still locked with password even after erasing the device, please help!
My iPad was locked because I forgot my password; I followed the step by step instructions to recover my iPad but it still asks me for a password to access the device even though the device should have been erased. Please help!?!
Is this how you do it?
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
It started while I was using Adobe InDesign, and that program froze, then crashed. When I tried to reopen the program, the error message I received was simply "Error: 16".
I tried to take a screen shot of the error message for reference, and it gave me a message saying I couldn't because I didn't have access to the files where it would normally store the shot.
Attached to my computer at the time was my Seagate Free Agent Go-Flex for Mac backup drive.
So, I closed any open applications, and restarted my computer. But it wouldn't restart. It only displays a grey screen with a flashing icon in the middle of a folder with a question mark on it.
I have no idea what happened - I wasn't using the machine any differently than usual, and it only had a few basic applicaitons open in addition to InDesign (like Preview, Text Edit, Microsoft Word, iCal).
I have MacKeeper on my MacBook, and I keep it clean.
Does anyone out there know what this flashing icon indicates, and if there is anything I can try on my own to fix it?
Thanks.ali har wrote:
It started while I was using Adobe InDesign, and that program froze, then crashed. When I tried to reopen the program, the error message I received was simply "Error: 16".
I tried to take a screen shot of the error message for reference, and it gave me a message saying I couldn't because I didn't have access to the files where it would normally store the shot.
For the Error: 16
http://kb2.adobe.com/cps/827/cpsid_82744.html
Seems a uninstall and reinstall of CS is in order.
Attached to my computer at the time was my Seagate Free Agent Go-Flex for Mac backup drive.
May or may not be a contributing factor, may have kicked in at a wrong time or running root code.
So, I closed any open applications, and restarted my computer. But it wouldn't restart. It only displays a grey screen with a flashing icon in the middle of a folder with a question mark on it.
Computer can't find a bootable volume.
https://support.apple.com/kb/TS2570
I have MacKeeper on my MacBook, and I keep it clean.
Well that explains it, MacKeeper is almost malware.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Search the forums here for "MacKeeper" they will tell the whole story, crapware.
Disconnect all drives, follow the "Grey Screen" instructions and hold Shift key down while booting, if you get into OS X , immediatly backup your files to another drive and disconnect.
In my opinion you should first check to make sure you have a backup of your data, then just erase the entire internal drive (hold c boot off the 10.6 disk, use Disk Utility), reinstall OS X, same user name, update to 10.6.8, c boot off the 10.6 and Repair Disk (to fix a update error) install your programs and finally return files from backup into the same main user folders like before (Music, Docs, Pictures etc.)
A pain it is, but you've hosed your system and in the process you might as well rebuild everything and have a fast machine again. So happens to clear MacKrapper, uninstall CS5 and any other junk in your system at the same time. Fresh, clean, lean and mean.
Learn to Carbon Copy Cloner to a external drive that new pristine boot drive, you can hold the option key and boot from it (even update it), which is a real bacon saver when something like this happens. Also it's free to use, donations accepted.
http://www.bombich.com/
Note: if anything above I've mentioned is too complicated or your not sure, seek the services of a local computer specialist. -
Help me. I did not use my ipad for about a month.Now that I turned it on after trying to charge it for many hours, it just would not turn on, just a black screen with sometimes an apple logo blinking, brought it to repair shops, said they could not fix it, please help
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached. This is making it nearly impossible to use the phone - please help! So far, this website has only made things more difficult.
The details you're providing are very helpful, Maj_Dad. With airplane mode enabled,
there would be no message because that disables celluar data. I would recommend
tying that mode with WiFi to see if it still happens. It sounds like this issue
has something to do with one of the applications on the device.
JoeL_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.
I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.
Hi,
I am not sure what the R3271 is, but we have a driver for the R3272 (Spectrum Analyzer with GSM option). Normally API's do not change significantly and so it is very likely that you will be able to use this driver for your application. You can get it by going to www.ni.com/idnet. The easiest way to get the the page is just to seach by vendor.
Hope this helps out.
Aaron K.
Application Engineer
National Instruments -
How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.
99jon wrote:
Perhaps it’s a design feature to speed up the Organizer launch.
I am sure it is.
- The normal use of the Organizer is not the folder view, it's the thumbnail view with an organization based on categories and folder. That way you should forget completely where your pictures are stored. Anyway, the folder view in the Explorer is not a map of the location of the different bits of your file, it's only a logical representation. That's easy to see when you are doing a defragmentation.
- The folder view is useful even for those using normally the thumbnail view, but that is only for rare cases when you must change the folder organization, for instance moving files to another drive. The folder view is here to prevent you from changing things from the explorer and outside of the Organizer.
- The new folder list view, which you find 'funny' is there to help better organizing using tags. Its huge advantage is that such a view is created extremely quickly by extracting the last subfolder in the media table : it's the way the database sees the folders, based on its own content, totally ignoring the complex folder organization of your disk with media files or any unrelated other kind of data. You should use it in many cases, the main purpose being assigning tags when you have assigned descriptive folder names. I had suggested such a solution to prevent the long standing bugs in the folder view of previous versions.
So yes, the purpose is:
- to speed up switching modes
- to help folder organization fans to migrate to tags organization
- to hopefully get rid of the old folder organization bugs -
Hello ! How i get activate my sim phone ? I have iphone 4s and I've received a message : "server unavailable. Please contact apple support." I've tried with iTunes, but ididn't work. Please help me.
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and tis now relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
If your iPhone has not been jailbroken, see the troubleshooting suggestions here:http://support.apple.com/kb/TS3424?viewlocale=en_US -
I was updating to the latest software thru iTunes and it failed to update and giving an unknown error (3). My phone stopped working what to do. Please help...
Hi there bugzystein,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
The screen on my iphone is with a colored border on the left corner, what can I do?
the screen on my iphone is with a colored border on the left corner, what can I do?
How thick is the border, are you sure it isn't just the edge of the display?
Try the basics outlined here -> iPhone: Hardware troubleshooting
If that doesn't help, have a Genius take a look at it or contact Apple. -
i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV. -
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
I have a WRT610N v2 router (IP address is 192.168.1.1), three desktops, one laptop and one Windows Home Server. Two desktops are running Win XP and one is Win 7, the laptop is running Win 7. I am using Cisco Network Magic Pro on all of my computers a
-
How do I create a fillable PDF and Save to webserver?
I have a PDF form all setup and have added fields. All I want to do is save a copy on a webserver via HTTPS that another person can login and view via HTTPS. The form contains some sensitive information. I can save to a mySQL database if needed, b
-
RE : Production system Issue on ME38
Hello guys, We have very critical issue on ME38 that is scheduling agreement. One SA has a bunch of line items and that line item has a bunch of schedule line. We didn't use MRP and confirmation. The problem is even though we did GR successfully at M
-
Cannot stretch af:panelTabbed in panelStretchLayout
I work in jdev 11.1.2.3. Create a jspx page (based on the tuturiol example) like this: af:form 01-af:panelStretchLayout 02--f:facet - center 03---af:decorativeBox 04----f:facet - center 05-----af:panelSpliter 06------f:facet - first 07*-------af:pane
-
Automatic time faulty after update to iOS 4.2
Automatic time worked fine under iOS 4.1 at home and during travel between different time zones (in Europ). Even taking into account correctly winter and summer time. Now after the update to iOS 4.2 the time shows one hour later. Only after switching