Unknown import error on Keynote

After updating Keynote on my iPad I am now not able to import the Keynote prI have been able to import no problem until I updated the Keynote. The error says "Presentation couldn't be imported. Unknown import error." I have restored the iPad and updated the Mac. Nothing is working. I have created roughly 30 presentations on Keynote that I need to import to my iPad. Help!

you have posted in the wrong forum, this is Keynote Mac.
You need to post in the iOS discussion here: Keynote iOS

Similar Messages

Keynote Unknown Import Error

When trying to import a Keynote file created on the Mac into Keynote on the Mac, you receive "Presentation Couldn't be Imported Unknown Import Error". The problem is with garbage in text pasted from web pages into text boxes in Keynote on the Mac. It displays fine on the Mac Keynote, but Keynote on the iPad will not import the file. The solution is to paste text into TextEdit, make it plain text, remove any bullets or other formatting and then paste into Keynote.

I have the same problem, but I am not pasting any text in from the web. My slides contain images and text I type in myself. I am using Keynote '09 on my Mac.
I have this problem with EVERY keynote presentation I try to import. They all work great on my Mac, and completely fail to load on my iPad. I can (sometimes) get a test file to work with a single title slide (picture and words), but the moment I add additional slides it fails.
Until this bug is fixed, the app is worthless. The point of this software is to be able to make presentations on your Mac -- if your iPad app can't load them, and can't even tell you why not, it's a complete waste of my $10. This should be a HIGH PRIORITY for Apple to fix.

I frequently get an "Unknown Import error" when opening an appleworks WP document with Pages.

I am trying to use Pages to convert Appleworks 6.9 WP documents - but I sometimes get an "unknown import error" dialog when I try to import the file into Pages. What does this mean, and is there any way to get around it. (I have not yet converted to Lion, so I can open the document in AW - but cutting and pasting into pages loses a lot of formatting so I would rather not have to go that route.)

Thanks. I don't actually think this is generally the case, though. (In fact, when I have had AW files that included graphics created by AW they seem to have converted smoothly).
Why can't Apple give an informative message instead of "Unknown Import Error"?

ORACLE 10g : Datapump-Import : Error: unknown parameter name 'REMAP_TABLE'

Hi,
I am working on Oracle 10g. When executed import datapump script in the UNIX box with option “RMAP_TABLE” I received the error “unknown parameter name 'REMAP_TABLE' “Can you please give me solution for it?
Scripts :-
impdp eimsexp/xyz TABLES=EIMDBO.DIVISION DIRECTORY=DATAMART_DATA_PUMP_DIR DUMPFILE=expdp_DATAMART_tables_%u_$BATCH_ID.dmp LOGFILE=impdp_DATAMART_tables.log REMAP_TABLE=EIMDBO.DIVISION:EIM2DBO:YR2009_DIM_DIVISION
Note :- The YR2009_DIM_DIVISION table is available in the target database. It is without partition table. The EIMDBO.DIVISION is partition table.
Thanks,

See your post here
ORACLE 10g : Datapump-Import : Error: unknown parameter name 'REMAP_TABLE'
Srini

Import Powerpoint to Keynote '09 causes this "import error" "out of memory"

Import Powerpoint file (1.6MB - Powerpoint 97-2004) to Keynote '09 causes this message "import error" "out of memory". Import process fails. What is going on??

Hi katie, and welcome to the forums.
How large is the document meant to be and how much free space do you have on your hard drive (look at the bottom of any finder window for the amount of space available) ?
Does the file start to download, but then stop with this message, or does it appear as soon as the download begins, or, alternatively, after it has downloaded when you try to open it?
The most likely explanation is that the file itself is corrupt.
Another possibility, though, is that you have some directory corruption.
Answers to the above questions will help us work out the most likely scenario.
Cheers
Rod

Word to Pages "Import Error"

I have a load of files created by drag and drop editing of pdf files into Word tables. I want to use pages to edit these ... it should be easier with services. Most of the files open fine, but a few give me an Import Error. Any ideas? There are no obbvious differences between the accepted files and the rejected files. I mightjust gie up with Pages, leaving it for the Mrs to play with ... Keynote seems nice though!
(Sorry is this has been asked and sorted, but search is off-line and I couldn't find it in the messages when I browsed)

Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry

"Import Error" opening password-protected .pptx document

Hi,
It seems Keynote '08 has some difficulty opening a PowerPoint 2007 document which has been password protected. Unhelpfully, it only suggests 'import error' rather than something more meaningful.
I've saved the same document without its password, and Keynote opens it just fine (albeit with the usual warnings about missing fonts).
Is this expected behaviour, or a bug to be fixed? Password-protected documents (however weak the protection) are the norm around here, so Keynote is going to be a bit of a handbrake...
Cheers,
Simon

No, unless there is a third party viewed which can handle the passwords. The in-built viewer is a simple viewer and doesn't support password protected documents at all.
Have a search through the Appshopper website to see if there is something better.

Import Error out of Memory

I can't open a powerpoint document that I just edited on Keynot a few days ago. Now when I try, it loads for a few minutes, then gives an Import Error message, saying that it's "Out of Memory". HELP!!!

this error is usually because the file is corrupted
use the original file from Keynote

Import odp to keynote

I make a ppt file with openoffice 3.30 (export odp to ppt).
I can't open this file with keynote 09 (5.3).
The error message is : "erreur d'importation : mémoire saturée" " import error out of memory"
Is there a solution ?
ppt files by office are OK

Unfortunately, no, at least, not in any elegant, or quick-and-easy way. (This is soooooo disappointing, because 25 years ago AppleWorks, also essentially an Apple product, was a truly integrated suite, in which this kind of thing was a snap.) The available options are all sloppy and tedious (cut-and-paste point by point is the most obvious) It's somewhat easier to do from WORD to PowerPoint (<http://mac2.microsoft.com/help/office/14/en-us/word/item/97009a21-e672-46cb-8 460-5c7d5e8e1f74>) - not exactly easy, but eas ier. To do this, within Pages export your Pages doc to WORD; then open the export with WORD, format it correctly, and follow the instructions on the MS site to send it to PP. Once you have that as you want it, open it in KN. Don't spend a lot of time with animations and builds in the PP doc, because they may not translate well into KN; do that stuff on the final KN.
Obviously, this is a case where I would without regret simply dispense with the Apple software altogether, and compose and present with the Microsoft apps.

Unknown file error, not with reference files

I get unknown file errors when trying to import quicktime movies (.mov) that are NOT reference files. I exported them using quicktime conversion and they take up several megabytes for about 10 seconds of video, and I even did cmd-j in quicktime to check. What else could be causing this? I have read write access too...
Thanks, Zach

What codec did you use when you exported the movies?

Receiving an "Unknown Format" error code when submitting a form

Product: Adobe Acrobat 9 Pro Extended
Hi, I'm trying to find out what exactly is Acrobat expecting as a return value on its form submission.
two parts to my setup:
1. The form. It is a garden vaiety form with a button on it which set up as follows:
Action -> Mouse Up -> Submit a form -> PDF The complete document
2. The receiver. This is a REST based service, expecting a HTTP Post.
For the most part, the whole setup works like a charm - the form is posted by the client, the server receives the file, creates a local copy and processes it correctly. After the post is successfully received, the last step on server is to send a reply to the client. This is where I’m getting stuck.
If I return an HttpStatusCode.Ok and a blank SOAP.Fault, I’m getting and “Unknown Format” error on the client side. I tried several different combinations/values/etc, including sending the result code only, but since I don’t know what exactly is acrobat expecting, I’m just shooting in the dark. Other error codes I’ve seen include “Invalid Server Response”.
Unfortunately I can’t find any guidance from Adobe on what Acrobat is expecting in return for the submit functionality, so any help/pointers are greatly appreciated.
Thanks everyone!

Here is the contents of a sample FDF that will cause a popup to display when it is imported:
%FDF-1.2
1 0 obj
<< /FDF << /Status (Your message goes here.) >> >>
endobj
trailer
<< /Root 1 0 R >>
%%EOF
Replace "Your message goes here." with the text you want to display, and don't change anything else in the sample. The value of the /Status key in the FDF is a PDF string, so it has to follow the rules described in the PDF standard (ISO 32000) for strings. So read up on it so you know how to properly escape/encode PDF strings.
Note that the server needs to set the MIME type of the response in the "Content-type" HTTP header to "application/vnd.fdf".

Import error: An error occurred whilst running the import.

---------------------------
Import error
An error occurred whilst running the import. The import log file will now be opened.
Exception details:
Microsoft.SharePoint.SPException: The file WO_11_12_A_109/STAGE 1ST has been modified by (unknown) on 29 Sep 2014 16:45:44 +0530. ---> System.Runtime.InteropServices.COMException (0x81020037): <nativehr>0x81020015</nativehr><nativestack></nativestack>The
file WO_11_12_A_109/STAGE 1ST has been modified by (unknown) on 29 Sep 2014 16:45:44 +0530.
at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
at Microsoft.SharePoint.Library.SPRequest.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
at Microsoft.SharePoint.SPFolder.UpdateOnImport()
at Microsoft.SharePoint.Deployment.FolderSerializer.SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector)
at Microsoft.SharePoint.Deployment.XmlFormatter.CallSetObjectData(Object obj, SerializationInfo objectData, ISerializationSurrogate surrogate, ISurrogateSelector selector)
at Microsoft.SharePoint.Deployment.XmlFormatter.ParseObject(Type objectType, Boolean isChildObject)
at Microsoft.SharePoint.Deployment.XmlFormatter.DeserializeObject(Type objectType, Boolean isChildObject, DeploymentObject envelope)
at Microsoft.SharePoint.Deployment.XmlFormatter.Deserialize(Stream serializationStream)
at Microsoft.SharePoint.Deployment.ObjectSerializer.Deserialize(Stream serializationStream)
at Microsoft.SharePoint.Deployment.SPImport.DeserializeObjects()
at Microsoft.SharePoint.Deployment.SPImport.Run()
at COB.SharePoint.Utilities.DeploymentWizard.Core.WizardDeployment.RunImport()
OK

Actual error is given below.
Is there any way to import it without any error?
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=65.57336
10/06/2014 14:37:33.20 SPContentDeploymentWizard.exe (0x1544)
0x117C SharePoint Foundation
Monitoring
b4ly High
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=45.483792
10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)
0x1378 SharePoint Foundation
Monitoring
b4ly High
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=27.316736
10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
b4ly Medium
Leaving Monitored Scope (import). Execution Time=30.521776
10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
nasq Medium
Entering monitored scope (import)
10/06/2014 14:37:33.24 SPContentDeploymentWizard.exe (0x1544)
0x1378 SharePoint Foundation
Monitoring
b4ly High
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=27.246848
10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
b4ly Medium
Leaving Monitored Scope (import). Execution Time=52.29824
10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
nasq Medium
Entering monitored scope (import)
10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)
0x117C SharePoint Foundation
General
8kh7 High
<nativehr>0x81020015</nativehr><nativestack></nativestack>The file WO/STAGE 1ST/Amd has been modified by (unknown) on 06 Oct 2014 14:37:33 +0530.

"Unknown Source" errors

The application behind this code is generating a bunch of "Unknown Source" errors at runtime:
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at Polygon#MouseHandler.mousePressed(Polygons.java:95)
at java.awt.Component.processMouseEvent(Unknown Source), and so on...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class Polygons extends JPanel {
 protected static boolean shiftIsDown;
 public static void main(String[] args) {
 JFrame window = new JFrame("Polygons");
 Polygons content = new Polygons();
 content.addKeyListener( new KeyAdapter() {
 public void KeyPressed(KeyEvent evt) {
 int key = evt.getKeyCode();
 if(key == KeyEvent.VK_SHIFT)
 shiftIsDown = true;
 window.setContentPane(content);
 window.pack();
 window.setLocation(100, 100);
 window.setResizable(false);
 window.setDefaultCloseOperation( JFrame.DISPOSE_ON_CLOSE );
 window.setVisible(true);
 } // End main()
 private static class PolygonData {
 int[] x;
 int[] y;
 public Polygons() {
 // Constructor.
 setBackground(Color.WHITE);
 MouseHandler listener = new MouseHandler();
 setPreferredSize(new Dimension(350, 350) );
 addMouseListener(listener);
 addMouseMotionListener(listener);
 private class MouseHandler implements MouseListener,
 MouseMotionListener {
 PolygonData polygon;
 private boolean dragging = false;
 private int vertices;
 private int x1, y1; // First vertex point.
 private int x2, y2; // Second vertex point.
 private boolean newPolygon = false; // Is the user drawing
 // a new polygon?
 public void mousePressed(MouseEvent evt) {
 // If the user is within two pixels of the
 // starting point, draw the polygon.
 // Graphics g = getGraphics();
 int tolerence = 2;
 if(shiftIsDown);
 x1 = evt.getX();
 y1 = evt.getY();
 vertices++;
 if(newPolygon) {
 polygon = new PolygonData();
 x2 = x1;
 y2 = y1;
 polygon.x = new int[1024];
 polygon.y = new int[1024];
 if(vertices == 1){
 polygon.x = new int[1024];
 polygon.y = new int[1024];
 polygon.x[vertices] = x1;
 polygon.y[vertices] = y1;
 g.setColor(Color.BLACK);
 g.drawPolygon(polygon.x, polygon.y, vertices);
 // Did the user click near the starting point?
 if( (polygon.x[0] - x1 <= tolerence)
 && (polygon.y[0] - y1 <= tolerence) ) {
 g.setColor(Color.RED);
 g.fillPolygon(polygon.x, polygon.y, vertices); }
 public void mouseMoved(MouseEvent evt) {
 // Grab the graphics context.
 Graphics g = getGraphics();
 x2 = evt.getX();
 y2 = evt.getY();
 g.drawLine(x1, y1, x2, y2);
 repaint();
 // Required by the interfaces....
 public void mouseReleased(MouseEvent evt) { }
 public void mouseClicked(MouseEvent evt) { }
 public void mouseEntered(MouseEvent evt) { }
 public void mouseExited(MouseEvent evt) { }
 public void mouseDragged(MouseEvent evt) { }
 } // End nested class Mousehandler
} // End class PolygonsSame goes for mouseMoved().... What's the fix?

flounder wrote:
if(newPolygon) {
polygon = new PolygonData();This is the probable cause. Since newPolygon is initially false, it will not execute the if statement and polygon will not be initialised. So later in your code when you attempt to use polygon it is null.That did it.
Thanks!

XML Import Error in ODI

Hello ODI Gurus,
I am getting a nullpointer exception while importing an Interface. I tried all modes. I have few more interfaces in the same folder which got imported successfully. The error message is also not very helpful. What could have possible gone wrong? Any suggestions?
-snehal
The error:
XML Import Error
java.lang.NullPointerException
at com.sunopsis.dwg.dbobj.j.b(j.java)
at com.sunopsis.dwg.dbobj.j.a(j.java)
at com.sunopsis.dwg.dbobj.SnpTxtCrossR.batchCrossRefComputing(SnpTxtCrossR.java)
at com.sunopsis.dwg.i.a(i.java)
at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java)
at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java)
at com.sunopsis.graphical.l.ow.e(ow.java)
at com.sunopsis.graphical.l.ld.b(ld.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Thread.java:619)
----------------------------------------------------------------------------------------------------------------------------------------

I am also getting a XMLImport error (nullpointer exception) while importing an Interface and Packages..
Can any one help me out....
Error is:
java.lang.NullPointerException
     at com.sunopsis.dwg.DwgObject.computeNextId(DwgObject.java)
     at com.sunopsis.dwg.DwgObject.getNextId(DwgObject.java)
     at com.sunopsis.dwg.dbobj.SnpPackage.duplicationComputeNewPrimaryKey(SnpPackage.java)
     at com.sunopsis.dwg.h.a(h.java)
     at com.sunopsis.dwg.i.a(i.java)
     at com.sunopsis.dwg.DwgObject.a(DwgObject.java)
     at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java)
     at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java)
     at com.sunopsis.graphical.a.oy.f(oy.java)
     at com.sunopsis.graphical.a.lf.b(lf.java)
     at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
     at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
     at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
     at java.lang.Thread.run(Unknown Source)

Unknown service: errors ?!

Hello,
i am still getting Unknown service errors using JDeveloper 3.2.2 and Oracle 8.1.7, InfoBus java client.
Here is a simple checklist:
1) sess_sh - connection OK
2) Connection manager in JDeveloper - OK
3) deployed Application Module as EJB Session Bean - OK
3) test AM using Local mode - OK
4) test AM using EJB mode - OK
Now i created simple InfoBus client with SessionInfo and one RowsetInfo. It works in local mode, but it fails in EJB mode stating: Unknown service: session0.
The same problem appears using Oracle 8i CORBA server, testing OK, deployment OK, but remote mode is unavailable.
I had no such problems using JDeveloper 3.1 and Oracle 8.1.6.
Can anyone try to create simple InfoBus client for example on scott/tiger schema, and report me success/failure ? I cant find a reason why it should not work .. :(
thanks a lot
Hernidez

Hello Stephen,
yesterday I've came across exactly the same problem. Here are the steps how I have then created a SAP Transaction iView that works:
Create R/3 System
System Administration -> System Configuration -> System Landscape
Select your Systems folder
right click -> New -> System
Select SAP_R3_Dedicated
Next
Step 2: General Properties
System Name: TOR
System ID: TOR
Save System as: System
Next
Step 3: Summary -> Finish
Choose your next step:
Open the object for editing
Select Property Category Connector
Application Host: gateway
Gateway Host: gateway
Gateway Service: 00
SAP Client 000
SAP System Name TOR
SAP System Number 00
Server Port 3200
Select Property Category User Management
Logon Method UIDPW
User Mapping Type: user
Edit: System Aliases
Alias: TOR
Click on Add
Click on Save
Maintain User Mapping
Click on Personalize
Select User Mapping
Select the System TOR
Insert valid Username and Password for that system
SAP Transaction iView
Content Administration -> Portal Content
Select the folder in which you want to create the iView
Right click: New -> iView
Select SAP Transaction iView
Next
Step 2: General Properties
iView Name: TOR
iView ID: TOR
Save as: iView
Next
Step 3: Selection of Application Variant
Select SAP GUI for Windows
Next
Step 4: Application Parameter
System: TOR
Transaction Code: SE80
Application Parameters
Start Technique for SAPGUI for Windows
X Automatic Detection
Step 5: Summary
X Open for editing when wizard completes
Click on preview
The important point which must be maintained in the Connector settings was the "Server Port".
Regards
Gregor

Unknown import error on Keynote

Similar Messages

Maybe you are looking for