Unknown indexes in ABAP dictionary for a BW SAP_BW 350 ?????????

Hi all,
can anyone help me with the procedure to handle unknown indexes in ABAP dictionary for a BW SAP_BW 350 Production system?
The list of some of the indexes are as follows :
/BI0/E0CCA_C11~P
/BI0/E0FIGL_C01~P
/BI0/E0OPA_C11~P
/BI0/E0PS_C04~P
/BIC/EIEFERC~P
Thanks a lot in advance ....
Madhavi Rane

You should be able to delete and recreate indexes from the infocube performance tab, RSRV or DB02. The bigger question is why these e fact table indexes are not being handled properly. I would try searching OSS Notes to see if yo ufind one relevant for your DB;
This older Notes provides some good background
Note 594287 - DB6: Corrections to the primary index of fact tables

Similar Messages

Unknown indexes in ABAP dictionary

Hi all,
can anyone help me with the procedure to handle unknown indexes in ABAP dictionary for a BW SAP_BW 350 Production system?
The list of some of the indexes are as follows :
/BI0/E0CCA_C11~P
/BI0/E0FIGL_C01~P
/BI0/E0OPA_C11~P
/BI0/E0PS_C04~P
/BIC/EIEFERC~P
Thanks a lot in advance ....

Hello Varsha,
It seems that the index for these InfoProviders are missing.
Goto RSRV -> Elementary Test -> Database -> Database Indices of an InfoCube and Its Aggregates
It should be green. If its red there will be a correct button on the top just excute it
or You can use the following Function Module to check
RSDU_INFOCUBE_INDEXES_CHECK
To Repair
RSDU_INFOCUBE_INDEXES_REPAIR
Thanks
Chandran

Missing Index there Unknown indexes in ABAP Dictionary in DB02

Dear All,
I am getting error in T-code DB02 >Missing Index there Unknown indexes in ABAP Dictionary.
Please find the following details.
Unknown indexes in ABAP Dictionary
    DB indexes                      11
        MARA_MEINS
        MARA_ZER
        MCHA_VFDAT
        VBRP_ARKTX
        VBRP_CHARG
        VBRP_FKIMG
        VBRP_KZWI1
        VBRP_MATKL
        VBRP_MATNR
        VBRP_SPART
        VBRP_WERKS
Please suggest how to correct them and can caution we have to take before creating the
Index.
The process creating the index form se11 table and there index>database utility and than create .The same process can be use .
Regards,

Hi,
Please use the below procdure:
- Goto transaction SE11
- Enter table name and press view
- Click button "Indexes..."
Please alse check with the below links for more information.
Index:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb20446011d189700000e8322d00/content.htm
Creating Secondary Index
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb47446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/1c/252640632cec01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c7/55833c4f3e092de10000000a114027/frameset.htm
Check with this also......[click here|Steps for creating a database index;.
With Regards,
Krishna.

DB02 = Missing Tables and Indexes = Unknown objects in ABAP Dictionary = DB views

Hi SAP Gurus,
on our SAP NetWeaver 7.x BW (based on AIX/Oracle) I find via transaction DB02 (path = Diagnostics => Missing Tables and Indexes) under "Unknown objects in ABAP Dictionary" under DB views a BW object /BI0/.....
When I make a double click on the object, I am getting the popup window "Display not possible for this object":
How can I identify the object and clarify with the BW application expert, if needed, how to resolve this object?
I searched already via RSA1 for the object, but I wasn't able to find anything so far ...
Thanks for your help and ideas.
Best regards
Carlos

Hello Carlos
The database view in question is a temporary database object created during a query execution.
Please read this SAP note 449891 - Temporary database objects in BW 3.x to understand what that view is all about and impact if those views are removed.
The SAP notes 449891 and 1139396 suggests to run the report SAP_DROP_TMPTABLES to drop these temporary objects. Whether the objects are still required or not is a question to be put across to the BW team. If the temporary objects are removed when they are used by a query, then the query will fail.
Have a nice day
RB

Unknown Objects in ABAP Dictionary

Hello Everyone,
I am getting a few objects that come up when running the Missing tables and Indexes command in the DBCOCKPIT. Under Unknown Objects in ABAP Dictionary I have the following objects appear:
sap_tabstats
V_MSSDWDLLS
sap_tabstats_V_newest
sap_tabstats_V_oldest
I cannot find anything referencing how to correct this issue. Can anyone be of any assistance? I would greatly appreciate it. Thanks!

Hi:
for sap_tabstats, sap_tabstats_V_oldest and sap_tabstats_V_newest you can find in note 1027512 :
4. IMPORTANT CHANGES IN DATA COLLECTION AND HISTORY
o Applying SP12 on a SQL Server system will introduce a new method
        for collecting database and table size histories. This new
        methode relies on t-sql objects sap_tabstats,
        sap_tabstats_V_newest, and sap_tabstats_V_oldest. These items
        aren't in the data dictionary and should be ignored in any
        discrepancy reports. They are added to an exception table for
        SP13.
For V_MSSDWDLLS you should read note 1020865. The view can be ignored.
Regards
Clas

Unknown object in ABAP Dictionary

Hello
In st04 in "Missing tables and indexes" are many indexes have reported unknown "Unknown object in ABAP Dictionary".
This is because indexex are created directly in DB. Is there a way to solve this problem?
We have db : oracle 10.2.04 and sap SAP ECC 6.0 (Pkg. lvl. 254).

Hi,
In ST04, If you click Missing tables and indexes then next to "Unknown object in ABAP Dictionary" there is a information button which says as below, kindly go through it which could help you.
" Here objects which were found on the database but which are not defined
in the ABAP Dictionary are displayed. These objects are displayed for
information only, since they generally do not belong to the SAP System.
These objects normally do not cause problems.
The objects are generally created directly with database means. If the
author is unknown, the purpose of the table can sometimes be determined
using the display function. Any data can only be displayed with database
means since the SAP tools for displaying data are based on the
definition in the ABAP Dictionary.
In some cases, such objects were already overlooked by SAP at delivery
or occurred during upgrading. To check this, search in OSS using the
keyword DB02 and the Release level for a corresponding Note.
Customer tables, views and indexes should always be created with the
ABAP Dictionary. This is the only way to ensure that the objects are
recognized by the SAP System and that for example collisions can be
avoided during an upgrade."
Regards,
Sharath

BW - Unknown objects in ABAP Dictionary - DB Tables

Hello gurus,
As a result of the consistency check in DB02 transaction, our BW System is showing a high number of "DB Tables" and "DB Tables withouth unique index" as unknown objects in the ABAP dictionary.
Is there any way to solve these consistency issues detected in DB02?
Thanks
Regards

Hi Dibya,
I checked the SAP note 33814 and it tooke me to the SAP note 449891 - Temporary database objects in BW 3.X
According to the recommendations, I executed the report SAP_UPDATE_DBDIFF, and I got as result 579 secondary indexes missing in the DB from the and still the 5 DB Tables unknown in the ABAP dictionary and 2 DB Tables withouth unique index,
I executed the report SAP_INFOCUBE_INDEXES_REPAIR in order to try to repair the secondary missing indexes that were shwon but withouth getting any results.
Do you have any recommendation to solve this situation? In the original scenario the DB02 transaction wasn't reporting any missing index.
Thanks and regards,

Unknown object in ABAP dictionary- TADIR^SRCDEP

Hi,
I found an entry in unknown object in ABAP dictionary while monitoring the system.
This this the location I found this entry DBACOCKPIT-> Diagnostics-> missing table and indexes-> unknown object in ABAP dictionary.
Could you please help to figure out how to solve this?
Thanks in advance.
Regards,
Pradeep

Hello,
You can ignore the index TADIR^SRCDEP in transaction DB2.
The installation creates the index TADIR^SRCDEP to avoid hanging
situations on the database while executing reports. When the
installation is finished you can delete this index.
Drop the index TADIR^SRCDEP on the database:
    o start SQL Server Management Studio
    o connect to your SQL Server
    o open a query window and execute the following command (replace
       SID by the uppercase system name, sid by the lowercase system
       name):
       drop index [TADIR^SRCDEP] on SID.sid.TADIR
Best regards
Clas

Can any provide me problem issues on ABAP dictionary for practice?

Or any one can tell me the links in which problem issues on ABAP dictionary is there?
Moderator message : Don't ask for links & solution to vague requirements. Thread locked.
Edited by: Vinod Kumar on Jun 14, 2011 9:36 AM

Hi jessculter,
Thanks for your post.
I am sorry to hear about the problems you have been having lately.
Please send me in your details using the "Contact The Mods" link found in my profile and I will take it from there.
Cheers,
OlgaC
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Help:procedure 2 handleunknown indexes inABAP dictionary for BW SAP_BW 350?

Hi all,
can anyone help me with the procedure to handle unknown indexes in ABAP dictionary for a BW SAP_BW 350 Production system?
The list of some of the indexes are as follows :
/BI0/E0CCA_C11~P
/BI0/E0FIGL_C01~P
/BI0/E0OPA_C11~P
/BI0/E0PS_C04~P
/BIC/EIEFERC~P
Thanks a lot in advance ....
Madhavi Rane

You should be able to delete and recreate indexes from the infocube performance tab, RSRV or DB02. The bigger question is why these e fact table indexes are not being handled properly. I would try searching OSS Notes to see if yo ufind one relevant for your DB;
This older Notes provides some good background
Note 594287 - DB6: Corrections to the primary index of fact tables

Patching ST_PI, open conversions in ABAP dictionary

Hello
during a patching of ST-21 2008 the tool stops at CHECK_REQUIREMENTS phase with the screen:
open conversions in ABAP dictionary
Some open conversion requests still exist in the ABAP Dictionary for the
following ABAP Dictionary objects. To avoid inconsistencies and loss of
data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
INDEX GLPCA-Z01
Now , no index exists in dictionary and database but in the past probably it existed and was cancelled . Anyway the table GLPCA is consistent in database and like runtime object.
I've activated it again but the problem is always the same
any idea?
thanks
Nicola

- start transaction SE14
- use the menue to "DB Requests - Created with import"
Check if there are any outstanding conversions.
Markus

ABAP Dictionary structure for use in ABAP Mapping

Hello, I'm creating an ABAP mapping class which requires me to use standard ABAP dictionary (table) structures (ex.MARA, KNA1 etc) for the mapping as the data coming into the mapping is in that format. I'm creating the ABAP class in the PI server and do not have table structures (MARA, KNA1 etc) in the dictionary in the PI server. What is the efficient way to create these structures (as Z elements) in the PI server's dictionary?
I have the XSD of these table structures. Can I import those XSDs into the ABAP dictionary in PI servers? If yes, how can it be done? Please help!

Yes you can import it as an external definition data and create the data type based on this XSD. Go through the link below for more information on the steps to import and how to use it.
http://help.sap.com/saphelp_nwpi71/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/frameset.htm

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

Delete restrict for ABAP Dictionary database table

Hi,
I defined two database tables in ABAP dictionary, one with master data, and one with records referencing the master data.
I also defined a foreign key relationship in the second table, so that new entries in the second table are checked against the master data table.
In addition to this behaviour, I also want the Dicitionary to perform a check the other way round. In other words, if I try to delete a record in the master data table, this should not be possible if there are records in the second table referencing this record. Thats how foreign key relationships work in Oracle databases.
Is there a way to force this behaviour for ABAP Dictionary tables, too? Or is it possible to make the table maintenance view perform this check?
Thanks for your help!
Kind regards,
Tobias

Hello Tobias,
I can delete records in the master table which have dependent entries in the second table without an error or a warning.
How are you deleting the entries, via SM30?
If yes, you can use the [Event 03: Before Deleting the Display Data|http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9f14a9d111d1a5690000e82deaaa/content.htm]. In this TMG event you can check if the entry can be deleted at all!
If you're using Open SQL statements to delete the records, i don't think DB layer implicitly checks the dependency. You can always put an explicit check though
Btw, out-of-curiosity, is this a custom or standard table?
BR,
Suhas

Maint. Status problem for View in ABAP Dictionary

Hello, guys. I have a problem with a configuration in my Maintainence View in the ABAP Dictionary.
I have a maintainence view in my abap dictionary, When i go to the tab "Maint. Status" there, and want to change the "Data Browser/Table View Maint." from "Display/Maintenance Allowed with Restrictions" to "Display/Maintenance Allowed", an error is occured. An error message is displayed, showed "The input field contains prohibited characters (already deleted)."
So, what should I do in order to change to "display/maintenance allowed with restrictions" status.
Hope anyone here can provide me a solution. Thanks in advance first. ^^

Check below SAP help
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
events
http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
Regards,
Atish

Unknown indexes in ABAP dictionary for a BW SAP_BW 350 ?????????

Similar Messages

Maybe you are looking for