Unknown Job BI_PROCESS_LOADING

Greetings All;
My PC runs sucessfully, but in the log, I get Unknown Job BI_PROCESS_LOADING and in SM37 I see BI_PROCESS_LOADING with status of cancelled.
The infopackage being run in the PC shows successful completion.
I've seen a few other topics regarding BI_PROCESS_LOADING, but none that answer this problem.
Can someone help me here?
Jim

The SM37 job log says:
Job started
Step 001 started (program RSPROCESS, variant &0000000002098, user ID ALEREMOTE)
Job or process BI_PROCESS_LOADING, waiting for event RSPROCESS 3Z4881UVCCO4VWEB4YNYW2ED5 is unknown
Job cancelled after system exception ERROR_MESSAGE
Thanks
Jim

Similar Messages

Job Cancelled in SM37

Hi all,
Job is cancelled in sm37 daily from 7th december onwards.
We have 4 process chains in our project and all the chains are ok when i am checking in RSPC,and the data is being loaded into the respective cubes and ods.
The error message is like
Job started
Step 001 started (program RSPROCESS, variant &0000000001639, user ID ALEREMOTE
Job or process BI_PROCESS_LOADING, waiting for event is unknown
Job cancelled after system exception ERROR_MESSAGE.
I have removed one processchain from scheduling 10 days before.
Is this is the reasong for the job failures?
Please help me
Sridath

Hi......
Look Job : BI_PROCESS_LOADING.........is actually the background job.............in a process chain.......when the trigger come to a load process...........first this job will run........and after completion of this job...........the actual IP will start...............we don't schedule this job.......but u r saying ur loads are fine.........if this job fails......then the IP will not start......so how ur IP s are running........As already suggested............u deschedule the chain........then again schedule it back.......
Now to check job that exactly fails at 12:00 a.m.....................
Go to SM37 ............give this job name...............date......and in the time field give the time.........
Regards,
Debjnai......

Capture event from job cancelled in SM37 by workflow, is not posible.

Hi, i'm learning workflows and i want capture the event ABORT o CANCELLED form job in sm37 and send email to agent recipient but i dont know as to resolve this problem.
Please , i need help.
Thanks.

Hi......
Look Job : BI_PROCESS_LOADING.........is actually the background job.............in a process chain.......when the trigger come to a load process...........first this job will run........and after completion of this job...........the actual IP will start...............we don't schedule this job.......but u r saying ur loads are fine.........if this job fails......then the IP will not start......so how ur IP s are running........As already suggested............u deschedule the chain........then again schedule it back.......
Now to check job that exactly fails at 12:00 a.m.....................
Go to SM37 ............give this job name...............date......and in the time field give the time.........
Regards,
Debjnai......

Jobs are in "Cancelling" Status

Hi Team,
Some of the Jobs are in "Cancelling" from long time . More than a month. Could you please help me in deleting those jobs.
Is there any way we can do job status check (like in SM37)
Thanks,
Preethish

Hi Preetish,
You can use the System_ForceJobStatusUnknown JobDefinition to set a particular job to Unknown, after that you can delete the Unknown job.
Regards,
Anton.

CHAIN: custom process type: EVENT: complex status: bad planned jobs

Hi experts,
I've implemented a custom process type (in RSPC/Settings/MaintainProcess) called ZWX_COND.
The main properties of ZWX_COND are: "ZCL_RSPC_DECISION" as ObjectTypeName, "00 ABAP Class" as ObjectType and "(Scheduled) processs ends with complex status" as PossibleEvents.
Class ZCL_RSPC_DECISION is a copy of the standar one CL_RSPC_DECISION. I've only made the necessary changes in methods GET_EVENTS and GET_EVENT (I only need two events) and EXECUTE (to choose one of the two events depending on a customized table).
I've made a main process chain with that new type (a decision step). I've connected that step with the process chain "A" for case 01 and with the process chain "B" for case 02. I've verified the main process chain and all is correct.
Once I've activated and planned the main process chain, un unknown job BI_PROCESS_CHAIN appears. In addition, although the decision step ends correctly (green color) and the event RSPROCESS with parameter XXXX_02 is triggered (it's correct, since it's indicated in that way in the customized table), process chain "B" doesn't start. In fact, neither process chain "A" nor process chain "B" starts. Both process chains remain in yellow color, but the corresponding jobs are not activated or finished, they are just released.
I see that the start condition (event parameter) for the planned jobs corresponding to process chains "A" and "B" is incorrect, since it is XXXX in both cases. I think the condition must be XXXX_01 for process chain "A" and XXXX_02 for process chain "B".
I'd like to implement this process type because I want the process to end with a green status. If I use a custom process type with events "succesfull" or "incorrect", I can make the decision and the chain process works, but the process chain ends with red status when the event triggered is the "incorrect" one.
Please, could somebody help me? I don't know if it's a program error or I'm implementing it in the wrong way.
Thanks in advance,
César Rueda
PS. Sorry by my English
Message was edited by:
        César Rueda
Message was edited by:
        César Rueda

Hi,
   i am experiencing the same thing .... have you got an answer , i did not see any notes on this type of issue .

SM:TMWFLOW_CMSSYSCOL Job failing

Hi,
SM:TMWFLOW_CMSSYSCOL job getting failed daily. Below is the job log.
Job started
Step 001 started (program /TMWFLOW/CMSSYSCOL2, variant , user ID XXXXXXXX
System XXX unknown in Transport Management System
System unknown in Transport Management System
System XXX unknown in Transport Management System
System unknown in Transport Management System
System XXX unknown
Job cancelled after system exception ERROR_MESSAGE
System XXX is from different domain and connected to Solman domain through domain link.
Please help.

Hi,
This job runs a program for collecting data of transports, notes and support packages of each System defined in table /TMWFLOW/CMSCONF using asynchronous RFC-function calls.
So, now check this table and RFC for more information.
Divyanshu

How do I use a cups printer on a linux machine from mountain lion

I have always used a linux cups printer on my network from my iMac. You could even browse the printer when looking for it. Worked fine.
Now in the updated Mountain Lion (10.8.2) is cannot see the remote printer anymore.
If I create the printer using cups through the web interface on my iMac, which is conected to the linux server, I can create teh printer, and print a test page on this printer on the linux server! Great.
But I cannot pick the printer from a list from any application on my Mac. It is as if it does not exist (but I can print a testpage though ...).
This a a real bad change in Mountain Lion. I consider to go back to Lion (10.7).
Isn't there any way to get this working or do I realy need to downgrade to 10.7
Thanks for any hints!

Hi VikingOSX and Grant Bennet-Alder.
Thanks for the replies, but unfortunately, they do not work.
The solutions you suggest are all OK for 10.7.x (and I have used them before), but these steps do nothing in 10.8.2. No difference at all.
I have also tried various other suggestions I found on the web and in this forum, such as:
cupsctl BrowseRemoteProtocols=cups
cupsctl BrowseProtocols='"cups dnssd"'
They all seems to work (and I needed them before in 10.7.x), but they don't seem to help any more in 10.8.2
To illustrate the problem, I have tested the following 4 cases (in this particular order) on iMac 10.8.2 through CUPS web browser leding to teh following (copied text from CUPS web interface):
Step 1:
Description:          EPSONserver
Location:          server
Driver:                    Local Raw Printer (grayscale)
Connection:          http://192.168.1.94:631/printers/R285
Defaults:          job-sheets=none, none media=unknown
Jobs
▼ ID ▼          Name          User          Size          Pages          State          Control
EPSONserver-23           Unknown           Withheld           1k           1            processing since Sat Oct 6 14:59:57 2012 "Printing page 1, 85%"
Result step 1:
Test page: via CUPS web browser, OK. works just fine, full color and everything looks just fine
Printer in printer list: No, installed printer not available in OSX.
Can print from application: No, printer not in printer list. Cannot select printer.
Step 2:
Description:          EPSONserver
Location:          server
Driver:                    EPSON SP R285 Series (color, 2-sided printing)
Connection:          http://192.168.1.94:631/printers/R285
Defaults:          job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
Jobs
▼ ID ▼          Name          User          Size          Pages          State          Control
EPSONserver-24           Unknown           Withheld           1k           Unknown            stopped "Filter failed"
Result step 2:
Test page: via CUPS web browser: NO. "Filter failed"
Printer in printer list: YES
Can print from application: NO, "Filter failed".
Step 3:
Description:          EPSONserver
Location:          server
Driver:          Generic PostScript Printer (color, 2-sided printing)
Connection:          http://192.168.1.94:631/printers/R285
Defaults:          job-sheets=none, none media=na_letter_8.5x11in sides=one-sided Jobs
Result step 3:
Test page: via CUPS web browser: low resolution/bad quality, black and white test page
Printer in printer list: YES, it remained in printer list when changed from step 2 to step 3.
Can print from application: Yes, but bad quality, not useful at all.
Step 4 = change settings back to step 1 :
Description:          EPSONserver
Location:          server
Driver:                    Local Raw Printer (grayscale)
Connection:          http://192.168.1.94:631/printers/R285
Defaults:          job-sheets=none, none media=unknown
Result step 4:
Test page: via CUPS web browser: OK. works just fine, full color and everything looks just fine
Printer in printer list: it disappeared from the printer list at the moment the changes back from step 3 to step 1 were activated.
Can print from application: No, printer not in printer list. Cannot select printer.
Overall conclusion:
The printer appears in the printer list only when it is a postscript printer or using manufacturer drivers (i.e epson drivers). It does NOT appear when using a RAW printer (but works fine printing test pages through the CUPS web interface).
10.8.2. seems to have a serious bug.
Any help? Or is downgrading to 10.7 my only solution?
THX for reading!

RSPC Variant does not exist - Could not find or load print parameters

We are on BI 7.0 (support pack SAPKW70017). We recently freshed test system from production.   After the refresh, we have problems opening all the process chains.
1. When I go to RSPC to open a process chain, I get many messages like this:
Variant &0000000067180 does not exist (there are different variant numbers)
Message no. DB612
Diagnosis
You selected variant &0000000067180 for program RSPROCESS.
This variant does not exist.
2. When I go to SM21 to check the system log, it displays many entries like below:
EJ F Could not find or load print parameters for step 1, job BI_PROCESS_TRIGGER/09134500
Documentation for system log message EJ F :
An error occurred during loading of the print parameters for a
background job step.
The print parameter record may have been deleted even though there was
a still a step that needed that data. This is an error as the
reorganization of the print parameters should prevent this from
happening.
To fix the problem, edit the step and save it, copy the job, or
schedule a new job. The print parameters will be regenerated in all
these cases.
3. I applied the OSS note 1169659 - Correction: Process variants not entered by BDLS.   The Basis rerun BDLS. But it did not fix the problem.
Would appreciate if someone could provide any help.
Thank you.

Hi Rebecca.
1) Please verify if exist process types called 'unknown job'. If exist: delete process types called 'unknown job' in your process chain. To do that please remove the chain from scheduling (menu bar > process chain > remove from schedule), afterwards switch the detail view on (menu bar > view) > right mouse click on the process type "unknown job" > displaying scheduled jobs > delete that job. After deletion of the 'unknown jobs' activate and schedule your process chain again.
2) After the removal of the 'unknown jobs' please check if the error messages with the missing variants pop up when calling your process chain disappears. If not, please implement and execute the attached report Z_FIND_JOBS_WITHOUT_VARIANT which deletes the jobs without variants.
I have already attached report as Report Z_FIND_JOBS_WITHOUT_VARIANT, you can download and create the report accordingly.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
REPORT Z_FIND_JOBS_WITHOUT_VARIANT.
data: l_t_job type table of tbtcp with header line,
      l_s_varsel    TYPE rsvar,
      l_t_variant   TYPE TABLE OF rsparams.
parameters: delete type rs_bool.
select * from tbtcp as job into table l_t_job
                    where progname = 'RSPROCESS'
                    and   exists ( select * from tbtco
                          where jobname = job~jobname
                          and   jobcount = job~jobcount
                          and   status = 'S' ).
loop at l_t_job.
l_s_varsel-report = l_t_job-progname.
l_s_varsel-variant = l_t_job-variant.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
    EXPORTING
      report               = l_s_varsel-report
      variant              = l_s_varsel-variant
      execute_direct       = 'X'
    TABLES
      valutab              = l_t_variant
    EXCEPTIONS
      variant_non_existent = 1
      variant_obsolete     = 2
      OTHERS               = 3.
if sy-subrc <> 0.
    write: / l_t_job-jobname, l_t_job-jobcount.
    if delete = 'X'.
      CALL FUNCTION 'BP_JOB_DELETE'
        EXPORTING
          JOBCOUNT = l_t_job-jobcount
          JOBNAME = l_t_job-jobname
        EXCEPTIONS
          OTHERS   = 1.
      IF SY-SUBRC <> 0.
        write 'not deleted'.
      else.
        write 'successfully deleted'.
      ENDIF.
    endif.
endif.
endloop.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
I hope I can be helpful.
Thanks,
Walter Oliveira.

Error in scheduling Process Chain.

Hi Experts,
I am creating process chains, but at the time of scheduling it is giving folloeing massage.
Job BI_PROCESS_LOADING could not be scheduled. Termination with returncode 8
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_LOADING under user ALEREMOTE.
System response
Scheduling terminated with return code 8. The meanings of the return codes are as follows:
SY-SUBRC = 4:
Scheduling terminated by user
SY-SUBRC = 8:
Error when scheduling job (JOB_SUBMIT)
SY-SUBRC = 12:
Error in internal number assignment
But I have Authorisation for scheduling Back ground jobs.
Please Help me,
Thanks in advance,
Raghav.

Hi........
This problem is already discussed in SDN........Search in Forum......
Check SAP Note : 947690 for error RSPC065
and SAP Note : 511475
Also check the solution of Roberto Negro .......
/message/685875#685875 [original link is broken]
Hope this helps......
Regards,
Debjani.......

Error msg in process chain

hi guys,
appended a process chain with process type compress,it shows fiine while checking & actvating,but while running it shows the error"Job BI_PROCESS_LOADING could not be activated
(return code 8)".kindly let me know if it is a known error.
Regards
Kishore

Hi,
This error code 8 comes when there is an error while scheduling a job. check the background user and its properties that schedule the job. Also look into the log of the error and see what it says. Background user should have USER TYPE set as SYSTEM.
Hope it helps. Assign points if helpful.
thanks
Laura.

BW error in training hierarchy

I have been getting the same error everyday for the last couple of weeks in BW. (see error at the bottom)
When looked in the Monitor I noticed the errors stated:
Node ID 0000245, char value 00003145 exists several times under the node ID 00000355.
Node ID 0000622, char value 00003050 exists several times under the node ID 0000035.
Node ID 0005085, char value 00003050 exists several times under the node ID 00001523.
Node ID 00002471, char value 00003047 exists several times under the node ID 0000354.
This occurs in our training hierarchy but when I look at the data there it looks fine.
Please advise me on a course of action to take. Thank you!
ERROR MESSAGE BELOW
Process Master Data Hierarchy (LC) Of Type Local Process Chain Has Status Ended with errors (Process Chain Zimmer HR Meta Chain) Log for This Process: Process Start Process , variant Master Data Hierarchy Start Variant has status Undefined (i Process Execute InfoPackage , variant FULL_0TRAINING_HIER has status Undefined (instance RE Process Execute InfoPackage , variant FULL_0TRAINTYPE_HIER has status Undefined (instance R Process Execute InfoPackage , variant FULL_0ORGUNIT_HR01_HIER has status Undefined (instanc Process Save Hierarchy , variant Generated from LOADING ZPAK_42ARTQB6X04KQ83YCOWQXG has status Undefined Process Save Hierarchy , variant Generated from LOADING ZPAK_42ARK5PWAO8U51LWKXVVVB has status Undefined Process AND (Last) , variant and has status Undefined (instance ANDP_452BEGAKYDDF7OQWXOORM8 Process Save Hierarchy , variant Generated from LOADING ZPAK_42ARIXRJSO0TK2BF6WHMC2 has status Undefined Process AND (Last) , variant and has status Undefined (instance ANDP_452BEJHSUSF1Z2UND7NVT2 Process Attribute Change Run , variant Hierarchy Attribute Change Run has status Undefined Log of Respective Background Job: Job started Step 001 started (program RSPROCESS, variant &0000000049629, user ID BWREMOTE) Version 'M' of chain MASTER_DATA_HIERARCHY was saved without checking Version 'A' of chain MASTER_DATA_HIERARCHY was saved without checking The Chain Was Removed From Scheduling Program RSPROCESS successfully scheduled as job BI_PROCESS_AND with ID 08450401 Program RSPROCESS successfully scheduled as job BI_PROCESS_AND with ID 08450402 Program RSPROCESS successfully scheduled as job BI_PROCESS_ATTRIBCHAN with ID 08450401 Program RSPROCESS successfully scheduled as job BI_PROCESS_HIERSAVE with ID 08450401 Program RSPROCESS successfully scheduled as job BI_PROCESS_HIERSAVE with ID 08450402 Program RSPROCESS successfully scheduled as job BI_PROCESS_HIERSAVE with ID 08450403 Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 08450507 Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 08450508 Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 08450509 Chain MASTER_DATA_HIERARCHY Was Activated And Scheduled Program RSPROCESS successfully scheduled as job BI_PROCESS_TRIGGER with ID 08450501 Job finished

So I can't have the same values with different date parameters? Is that what you are saying? - yes, it doesnt matter even if it has different dates(DATE FROM), the key fields shouldnt be duplicated.
the work around would be go for a ABAP program in R/3 to append some number after the duplicate records.. so that no more deemed to be duplicates in BI
Message was edited by:
voodi

Problem with large spool lists

Hello everyone,
we have the following problem with one of our printers. When we are trying to print larger lists (>30 pages) the spool shows an "unknown error" and only a few pages are printed out.
We have the following setup. A Kyocera FS-9520DN printer with Device Type KYOAAB1C which is connected via saprouter connection and host spool access method U. The only error I get from the tracefile of the Spool WP is
S Tue Feb 22 07:34:37 2011
S *** ERROR => cannot write to connection [rspoclpd.c   857]
S *** ERROR => Lost connection, control file not sent [rspoyunx.c   1754]
T new memory block 000000002B6D6CE0
S handle memory type is RSTSPROMMM
and the SP01 error message
Status:              Incorrect (Reason unknown)
Job status:          Completed
Area:                Unknown
Error:               Reason unknown
Last event:
Message:             Processing completed by spool work process
Any suggestions what might improve the situation? Thanks in advance
Marco

Hi,
A direct connection to a remote printer is not recommended as per the SAP Note #64628.
The best option is to define the printer locally on the SAP server with Access method L for Unix or Access Method C for windows. If you need to use remote Access Method U or S, you should use a print server in between the SAP system and the printers.
Regards,
Aidan

Process Chain issue-Needs urgent Help

R/3 Master Data Main Chain
Problem Description:
When we trigger the process chain from SM64, the process chain fails at the step as shown below.
There are no logs for the local chain i.e. the local chain fails without linking.
If we manually schedule the local chain it runs successfully.
The error message changed as and when we tried fixing the defects. Each of them with the solutions tried for them is explained below.
ERROR 1:
The error message which we got was as Cannot Activate Job BI_PROCESS_LOADING (return code 8).
Solution tried:
1.     Replicating Data Sources and activating the transfer and communication structures by running the programs RS_COMSTRU_ACTIVATE_ALL and RS_TRANSTRU_ACTIVATE_ALL.
ERROR 2:
Later we found that the released job was missing for failed local chain.
Solution tried:
1.     We created a new job by copying a previous job.
ERROR 3:
When we re-scheduled the process chain, we got the error message as shown below.
Solution tried:
1.     Deleted all the logs which were in running status.
ERROR 4:
After re scheduling the process chain we are getting the error message as shown below. This is the error message we are getting now.
Solutions Tried:
1.    Saving the variant and reactivating the process chains.
2.     Replicating Data Sources and activating the transfer and communication structures by running the programs RS_COMSTRU_ACTIVATE_ALL and RS_TRANSTRU_ACTIVATE_ALL.
3.     Changing the scheduling options of the failed local chain to Start using Meta Chain or API from Direct Scheduling.
4.     We searched for locked entries in SM12. There are no locked entries.
5.     We ran attribute change run with variant for info object Profit Center from the following path
    RSA1-> Tools-> Apply Hierarchy/ Attribute Change Run. We created a new variant for the info object.
We still could not find a solution. do let us know if you have any inputs.
Thanks,
Mayuri

Hi All,
Please reply ASAP. Its critical.
We created a new process chain and when we do a check on it,we are getting a warning message.
We just upgraded our Dev box from 3.5 to 7.0. Our master data process chains, which reflect samples delivered by SAP, are giving warnings saying "too many parallel processes" for chosen server. It refers us to note 621400.
I am curious to know if others have run into this, and if they have changed their MD process chains to run in a serial fashion.
Prior to the upgrade, we had no deadlocks with process chains.
Thanks.

Mail for Exchange : HTTP Server Error 500

Just installed MFE on my Nokia E90 and having issues synching it up with my exchange account. I checked the log and this is what it says :
19/12/2008 9:23:03 Setting OFFLINE Status to False
19/12/2008 9:23:03 Setting ROAMING status to False
19/12/2008 9:23:03 Setting DISK FULL status to False
19/12/2008 9:23:08 Setting OFFLINE Status to False
19/12/2008 9:23:08 Setting ROAMING status to False
19/12/2008 9:23:08 Setting DISK FULL status to False
19/12/2008 9:24:34 Profile Updated
19/12/2008 9:24:34 unable to open snapshot database (-1)
19/12/2008 9:24:34 OffPeakTime active
19/12/2008 9:24:42 Cancel Job:0, Type:"Sync Job On Profile":
19/12/2008 9:25:06 HTTP error code=500
19/12/2008 9:25:06 HTTP Server Error 500: Internal Server Error
19/12/2008 9:49:10 OffPeakTime active
19/12/2008 9:55:09 HTTP error code=500
19/12/2008 9:55:09 HTTP Server Error 500: Internal Server Error
19/12/2008 10:02:01 HTTP error code=500
19/12/2008 10:02:01 HTTP Server Error 500: Internal Server Error
19/12/2008 10:04:21 Profile Updated
19/12/2008 10:04:22 OffPeakTime active
19/12/2008 10:04:30 HTTP error code=500
19/12/2008 10:04:30 HTTP Server Error 500: Internal Server Error
19/12/2008 10:05:17 HTTP error code=500
19/12/2008 10:05:17 HTTP Server Error 500: Internal Server Error
19/12/2008 10:09:39 HTTP error code=500
19/12/2008 10:09:39 HTTP Server Error 500: Internal Server Error
19/12/2008 10:11:06 OffPeakTime active
19/12/2008 10:11:06 Setting OFFLINE Status to False
19/12/2008 10:11:07 Setting ROAMING status to False
19/12/2008 10:11:07 Setting DISK FULL status to False
19/12/2008 10:11:23 HTTP error code=500
19/12/2008 10:11:24 HTTP Server Error 500: Internal Server Error
19/12/2008 10:35:27 Profile Updated
19/12/2008 10:35:28 OffPeakTime active
19/12/2008 10:35:29 Profile Updated
19/12/2008 10:35:29 OffPeakTime active
19/12/2008 10:35:30 Cancel Job:1, Type:"Sync Job On Profile":
19/12/2008 10:35:43 HTTP error code=500
19/12/2008 10:35:43 HTTP Server Error 500: Internal Server Error
19/12/2008 10:40:12 OffPeakTime active
19/12/2008 10:42:23 Profile Updated
19/12/2008 10:42:23 OffPeakTime active
19/12/2008 10:42:36 HTTP error code=500
19/12/2008 10:42:36 HTTP Server Error 500: Internal Server Error
19/12/2008 10:43:44 Profile Updated
19/12/2008 10:43:45 OffPeakTime active
19/12/2008 10:43:45 Profile Updated
19/12/2008 10:43:46 OffPeakTime active
19/12/2008 10:43:59 HTTP error code=401
19/12/2008 10:43:59 HTTP Server Error 401: UnAuthorized
19/12/2008 10:46:17 Profile Updated
19/12/2008 10:46:17 OffPeakTime active
19/12/2008 10:46:18 Profile Updated
19/12/2008 10:46:19 OffPeakTime active
19/12/2008 10:46:20 Cancel Job:5, Type:"Sync Job On Profile":
19/12/2008 10:46:33 HTTP error code=401
19/12/2008 10:46:33 HTTP Server Error 401: UnAuthorized
19/12/2008 10:47:50 HTTP error code=401
19/12/2008 10:47:50 HTTP Server Error 401: UnAuthorized
19/12/2008 10:49:54 HTTP error code=401
19/12/2008 10:49:54 HTTP Server Error 401: UnAuthorized
19/12/2008 10:51:02 Profile Updated
19/12/2008 10:51:02 OffPeakTime active
19/12/2008 10:51:03 Profile Updated
19/12/2008 10:51:04 OffPeakTime active
19/12/2008 10:51:15 HTTP error code=500
19/12/2008 10:51:15 HTTP Server Error 500: Internal Server Error
19/12/2008 10:53:02 Profile Updated
19/12/2008 10:53:03 OffPeakTime active
19/12/2008 10:53:04 Profile Updated
19/12/2008 10:53:04 OffPeakTime active
19/12/2008 10:53:05 Cancel Job:10, Type:"GlobalAddressLookup":
19/12/2008 10:53:31 Profile Updated
19/12/2008 10:53:31 Cancel Job:11, Type:"UnKnown Job":
19/12/2008 10:53:31 OffPeakTime active
19/12/2008 10:53:32 HTTP error code=403
19/12/2008 10:53:32 HTTP Server Error 403 : Forbidden
19/12/2008 10:53:43 HTTP error code=403
19/12/2008 10:53:43 HTTP Server Error 403 : Forbidden
19/12/2008 10:53:51 HTTP error code=403
19/12/2008 10:53:51 HTTP Server Error 403 : Forbidden
19/12/2008 10:54:41 Profile Updated
19/12/2008 10:54:41 OffPeakTime active
19/12/2008 10:54:50 HTTP error code=500
19/12/2008 10:54:50 HTTP Server Error 500: Internal Server Error
19/12/2008 11:24:50 HTTP error code=500
19/12/2008 11:24:50 HTTP Server Error 500: Internal Server Error
19/12/2008 11:54:51 HTTP error code=500
19/12/2008 11:54:51 HTTP Server Error 500: Internal Server Error
20/12/2008 12:17:46 HTTP error code=500
20/12/2008 12:17:46 HTTP Server Error 500: Internal Server Error
20/12/2007 12:24:37 OffPeakTime active
20/12/2007 12:24:49 HTTP error code=500
20/12/2007 12:24:49 HTTP Server Error 500: Internal Server Error
20/12/2008 12:25:23 AUDT Timer expired
20/12/2008 12:25:23 OffPeakTime active
20/12/2008 12:25:23 OffPeakTime active
20/12/2008 12:25:25 OffPeakTime active
20/12/2008 12:26:38 HTTP error code=500
20/12/2008 12:26:38 HTTP Server Error 500: Internal Server Error
20/12/2007 12:29:46 OffPeakTime active
20/12/2008 12:32:11 AUDT Timer expired
20/12/2008 12:32:11 OffPeakTime active
20/12/2008 12:32:11 OffPeakTime active
20/12/2008 12:32:21 HTTP error code=500
20/12/2008 12:32:21 HTTP Server Error 500: Internal Server Error
20/12/2008 12:40:09 OffPeakTime active
Any idea ?

I have the same problem, the microsoft link not solve my problem:
23/10/2009 11:42:36 Profile Updated
23/10/2009 11:42:36 PeakTime active
23/10/2009 11:42:42 HTTP error code=501
23/10/2009 11:42:42 HTTP Server Error 501: Not Implemented
23/10/2009 12:16:55 Profile Updated
23/10/2009 12:16:55 PeakTime active
23/10/2009 12:16:56 PING Command Requested
23/10/2009 12:16:59 HTTP error code=403
23/10/2009 12:16:59 Exception during Ping.
23/10/2009 12:16:59 HTTP Server Error 403 : Forbidden
23/10/2009 12:17:00 Error occurred during Ping.
23/10/2009 12:17:00 Error occurred during Ping. Setting Status to Waiting For Reconnect
23/10/2009 12:17:15 HTTP error code=403
23/10/2009 12:17:15 HTTP Server Error 403 : Forbidden
23/10/2009 12:17:35 HTTP error code=403
23/10/2009 12:17:35 HTTP Server Error 403 : Forbidden
23/10/2009 12:17:55 HTTP error code=403
23/10/2009 12:17:55 HTTP Server Error 403 : Forbidden
23/10/2009 12:21:55 PING Command Requested
23/10/2009 12:21:58 HTTP error code=403
23/10/2009 12:21:58 Exception during Ping.
23/10/2009 12:21:58 HTTP Server Error 403 : Forbidden
23/10/2009 12:21:58 Error occurred during Ping.
23/10/2009 12:21:58 Error occurred during Ping. Setting Status to Waiting For Reconnect
Many thanks

Mail for Exchange v2.5.5 out

Available at usual place:
http://businesssoftware.nokia.com/mail_for_exchange_downloads.php

22-Aug-200709:53 AM
sunlie wrote:
Install V2, works just fine but I'm having trouble using the GAL lookup, it will start searching then close, no result return. I check the admin_log.txt and it list :
22/08/2007 14:47:12 Setting ROAMING status to False
22/08/2007 14:52:44 Setting ROAMING status to False
22/08/2007 15:14:23 Create User Initiated Job:51, Type:"UnKnown Job":
22/08/2007 15:14:32 HTTP error code=400
22/08/2007 15:14:32 HTTP Server Error 400: Bad Request
Anybody has a clue what went wrong ?
Hi,
I have the same proble and receive the same error. M4E work just fine when synchronising emails and calendar but when trying to use company directory i'm facing the same problem.
After upgrading to M4E 2.0.1 I made a full Sync and guess what!!! My phone book disappear and when making a new sync I got it again.
I'll appriciate if anybody know how to solve this problem.
Regards,
P.S.: My handset is N95 with V12.0.013
Jean

Unknown Job BI_PROCESS_LOADING

Similar Messages

Maybe you are looking for