Unknown message

Hi !
During a discusion with my girlfriend, I received a message from her :
http://t.co/9SRvbLregR (it's french ..)
But she sended that text :
http://t.co/6BsC2uINmo
She has got an iPhone 4s with iOS 7.0.3
I've an iPhone 4 with 7.0.2
So, it's too *** …
- And, sometimes, she don't have push notification but receive it when she unlock her iPhone
Thanks

Hi
can you check the error message belongs to which message class and do where-used-list on the message , to find the exact place from where error message is raised. This will help for further analysis

Similar Messages

  • Error unknown message when saving ai file

    Several days ago I got an external hard drive to backup. Had an error message saying all wasn't saved right. I use CS2 suite, all works fine except my illustrator files will not save as ai. They will save as jpeg, pdf, eps, but not ai. Error unknown message window popsup. Also 3/4 of my file names have turned from black to blue. I have reinstalled CS2 and this didn't fix the problem. What went wrong? How can this be fixed? I'm working on a book using Illustrator files alot.

    PC - Windows, no fonts were installed. Only the ai files are affected. But nearly 3/4 of all file extension names have changed from black to blue. No big deal on that, but the ai saving is very upsetting.
    Thanks,
    Garry
    What platform?
    OS?
    Computer Model!
    Did you install any fonts?

  • Error "Unknown Message" in BPM process

    Hi, I'm experiencing the wonderful "Unknown Message" error that has been very discussed here. I am creating an IDoc to JBDC business process who bundles several IDocs to be sent as a query to JDBC.
    When I try to run the process, it doesn't even starts it, because of this error.
    I checked the XML and I think that the issue is at the receiver determination or at the interface determination, because the tag receiver looks like this:
    - <SAP:Sender>
      <SAP:Service>System1</SAP:Service>
      <SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">FIDCC2.FIDCCP02.ZFIDCCP02</SAP:Interface>
      </SAP:Sender>
    <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>IntegrationProcess1</SAP:Service>
      <SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">FIDCC2.FIDCCP02.ZFIDCCP02</SAP:Interface>
      <SAP:Mapping notRequired="Y" />
      </SAP:Receiver>
    And, from what I said above, the IDoc can't be both sender and receiver. For me, it doesn't make sense. In the receiver it should have been the inbound abstract interface,right?
    What I tried and doesn't work:
    1) Reactivating the integration process from SXI_CACHE
    2) Reimporting the process to the integration directory
    3) Deleting and then remaking all the directory objects, like receiver det, interface det and receiver agreement.
    What Integration Directory objects I have
    1) communication channels
    2) business scenario
    3) imported integration process
    4) receiver determination from ERP to the integration process, including an interface determination from IDoc to abstract interface
    5) receiver determination from integration process, including an interface det from abstract interface to JDBC message interface
    6) receiver agreement from integration process to JDBC business system, having checked on header mapping the sender service as the integration process.
    Can you please help me in any way?
    Please don't post links that contain solutions that I already tried, I think I've seen today at least 20 links on this issue and none helped.
    If this is not sufficient, I can post the whole return XML on my next reply.
    Thanks in advance,
    George
    Edited by: George Ardeleanu on Jan 26, 2009 1:57 PM

    I've checked the trace and the main error message seems to be:
    <Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service IP_CreditControl_Bundle</Trace>
    How could this be? Because I've set the receiver & interface determination in the integration directory and they're fine.

  • BPE adapter unknown message

    Hi
    I get an error in MONI" BPE adapter unknown message " .scenario is working fine in development system .And just now imported the configurations in quality system .
    SXI_CACHE  RETURN CODE IS 0
    DELETED AND REIMPORTED THE PROCESS AGAIN
    i  have check transaction enabled for all teh steps in BPM in dev sysem ..Would it be a possible reason
    and does it have any linkage to authorizations .. since I retransferred the change list to my name from some one else and activated  but with no errros
    Kindly advise on to resolve this error
    Thanks
    Anusha

    i have check transaction enabled for all teh steps in BPM in dev sysem
    Any specific requirement to do this?....if no then remove the checkbox entry....just the Start Process checkbox should be enabled for the first step (receive step)
    Regards,
    Abhishek.

  • Unknown Message in JDBC- XI- RFC using ccBPM

    Hi, I try to create a scenario using BPM. It seems, that the message is sent from the JDBC adapter to the BP Engine correctly, but then I get the unknown message error.
    Does anybody know, how to solve the problem?
    Thanx Peter

    Hi Peter,
    The message is not reaching the BPM. The BPM would not have actiavted properly. Refer to the following thread that tells you a step-by-step procedure to rectify your problem. Refer to SridharNatrajan's reply..
    https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https://Process Integration (PI) & SOA Middleware
    Cheers,
    Siva Maranani.
    Message was edited by: siva  maranani

  • Unknown message type 'Event/SkypeVideoMessage' & Bolding text Issues

    Let me start off by saying how great Skype web is- it's much faster and easier to load in the browser. I have noticed two big issues and that is I cannot watch or receive video messages, and when someone bolds a message in Skype for Desktop it doesn't show up quite right.. Video messages come out with this error message: "Unknown message type 'Event/SkypeVideoMessage" As for the bolding issue, basic HTML, just coming out weird... probably a simple fix.

    Hi and welcome to the Skype Community,
    Thanks for your interest in Skyp for Web and great to hear it's a useful extension for your everyday Skype use.
    Indeed the video message conversation event is currently not supported. Also rich text formatting of text is currently not rendering. Support for these features will arrive via the regular updates to Skype for Web in the future.

  • I have an unknown message on my iMac telling me to turn it off, the computer has also frozen apart from that massage

    i have an unknown message on my iMac telling me to turn it off, the computer has also frozen apart from that massage?

    Sounds like a kernel panic.
    What is a Kernel Panic?
    http://support.apple.com/kb/TS3742
    and  http://support.apple.com/kb/TS1892?viewlocale=en_US
    http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
    More details here:
    http://www.thexlab.com/faqs/kernelpanics.html
    Useful articles on how to avoid and eliminate kernel panics here:
    http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
    http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

  • HT4623 IOS7 "Device Unknown" message after download

    Just got IOS7 but when i went thru the last few steps of setup a "device unknown" message came up? Any ideas on how to fix this? I cannot use my phone at all as of now. Thanks.

    Can you skip this step? If yes, can you provide the information under Settings-General-About?
    Best!
    B.

  • I bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message. so when i tried to restore the iphone setting it is giving me now "ICCID: unknown" message please help. any ideas?

    i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
    so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?

    Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
    There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
    ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
    Where, EXACTLY, did you get this phone?

  • RealVNC gives unknown message type 167

    I'm trying to use the RealVNC viewer from a Windows machine to talk to a Mac running OS X 10.4.3 and Apple Remote Desktop. It almost works, and in fact one time it did work, but on every subsequent attempt, I get "unknown message type 167." The message comes up after I give the VNC password, and while the screen is initially drawing. Every other VNC viewer I've tried also fails to connect.

    Hey man! Here is a list of the mappings between Java and Flex classes in blazeds:
    http://livedocs.adobe.com/blazeds/1/blazeds_devguide/help.html?content=serialize_data_3.ht ml
    And here is a post in another forum, with a guy with your same problem:
    http://www.experts-exchange.com/Web_Development/Web_Languages-Standards/Flex/Q_26185302.ht ml
    I would use Object in Flex, and map it to a Map in Java.

  • HT1414 I have tried to restore my IPhone 5 many times now and keep getting an unknown message error at the end of the set-up. The phone is stuck in restore mode and I am unable to use it. What do i need to do to get resolved...help!!!

    Dear all,
    I have had problems with the internet connection with my IPhone 5. I have tried to restore the software to see if that would make a difference.
    I have tried now for at least 10 times to restore the software. The phone is locked now in restore mode, and when I get to the end of the restore to verify with the server, i get a consistent unknown error message. Sometimes is says my phone cannot be found.
    The phone has the connect to Itunes on the screen and cannot be used.
    I am running out of patience now....need urgent help!!
    What to do?

    Contact Apple support for warranty service.

  • Publish error unknown message

    OK, usually if you know what the problem is you can fix it! But this prompt (Publish error unknown) isn't giving me much in the way of info to fix my problem.
    This has happened since the latest security download too.
    Anybody else with the same error?

    I've got the same problem. it started while on vacation in Ireland and thought it was the hookup i was using, but I tried at it again during a stop over on the Mainland and again once I got home in Hawaii. I still get the same unknown error message and all my picture folders are red now where before it was just the ones I had edited. Does anyone know if there is a limit on how many pictures you can have ? I know you can't upload to iWeb more than 99 photos, but what about the whole system and How do you check to see if you exceeded it. ?
    aloha
    joe

  • TS3694 My iPad is in recovery mode, however when I attempt to restore it through iTunes I get an error message: "an unknown message occured, Error 40", which apple has no current information on. Any thoughts or suggestions on how to correct this is appcia

    My iPad is currently in recovery mode. When i attempt to restore it through iTunes, I get an error message: "an unknown error has occured, error 40", Help is appreciated!

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

  • Firewire Device unknown message - Macbook Air

    Hi,
    So I have an old Canon Digital Camcorder and I want to grab all the old movies of the kids, so I purchased a Thunderbolt/Firewire adaptor from Apple, plugged it into a 9pin to FW800 cable and powered everthing up, opened iMovie and no camera appeared, checked Finder and nothing.
    So I checked System Information and under Firewire devices, I see the message "Device Unknown".
    So I started searching the web for drivers and nothing is coming up, so I am wondering what I can do ?
    I don't want to go back to my old IBM X32 thinkpad as it struggles to capture the data stream.
    Thanks
    Carl.

    Hi Carl,
    If you are having issues transfering your video from an older Firewire camcorder, you may find the following article helpful:
    iMovie '11: Import video from a tape-based (FireWire-equipped) camcorder
    http://support.apple.com/kb/PH2144
    Regards,
    - Brenden

  • UNKNOWN MESSAGE error in BPM

    Hi,
    I have transported scenarios in production.
    One of the scenario with bpm is working fine.
    But in one scenario i am getting the error
    <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
    In trace i found
    could not create BPE proxy for message, no XML object definition found for message 48965DEB190A41F3355AC0B710EA2106</Trace>
      </Trace>
    in sxi_cache the return code is 0 , but still i activated it and still the return code was 0.
    but still i get the above error.

    Hi,
    Where you are facing this issue? In PROD or QA?
    Did you tried to remove the locks, and re-activate it? I would say go to SM12 in Abap stack and check what's the corresponding object got locked!  But before doing it, please let us know that u r not doing this in PROD. Coz, I don't want to suggest you this approach in PROD.
    raj.

  • BPM - BPE_ADAPTER : Unknown message Type

    Hello Experts,
    I am developing a simple BPM scenario with just one receive and one send step. I have configured bothl the BPM steps along with the container elements and verified the objects in IR and ID. In SXI_CACHE the status of teh Integartion Process is '0' which is the correct. I tried reactivationg and redeploying the process several times too, yet message in PI faile with the below error description:
    <!--  Call Adapter
    -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anybody advice please?
    Thanks in advance,
    Elizabeth.

    In SXI_CACHE the status of teh Integartion Process is '0' which is the correct. I tried reactivationg and redeploying the
    process several times too, yet message in PI faile with the below error description:
    In that case, delete the ID part for this scenario and redo the objects....from importing the IP into ID.
    If still not working then the BPM itself has to be recreated.
    If all the messages are properly configured in the BPM and still it is giving the error then it is a CACHE issue.
    I hope the BPM is just for practice purpose and not related to any project...as the design does not require to have a BPM
    Regards,
    Abhishek.

Maybe you are looking for