Unknown name caller for all contact recent call . but i have save their contact number . Help ASAP !
Hello , i need guide to fix my problems. i have facing a problem , all my call from my contact become Unknown after i change new SIM card.
What should i do to fix it ? Already Reset all settings and format my iPhone. already sync my iphone with iTunes . but , still same . please . Help me . i got problem when im working . i dont know who did call me . every call become ' Unknown ' .
@ antoniofrombc...no responses to help with the issue... It's very weird I must say that this happening... No to mention iCloud never is syncing information.. So no contacts on my iPad either.. I see my old contacts from my laptop from my ok'd iPhone 2....
Similar Messages
-
I set up my new iphone 4s and assigned ringtones to my contacts on my phone. A day later each contact showed "multiple ringtones". How do I keep that from happening? I did not physically sync my phone and am set up on icloud to sync. thx.
I had this problem due to Linked contact cards so that each contact was composed of more than one entry. Apparently the Contacts list can get corupted and have more entries than you think. I found the answer in the Linked /Unknown discussion on this community. My reply that I poste dthere fixed the problem.
This is what I wrote:
================================================
I had a problem where I could not get the assigned ringtone to ring correctly. Tried removing and restoring the contacts from MobileMe several times and resetting sync to copy the computer contacts to replace the MobileMe contact. Still no luck. Then I looked at the All Contacts number and it was larger than the total number in my Contacts list on the computer. So there were extras I couldn't see. When I turned off the MobileMe Contacts, some where still left anyway.
I then tried to cleanup the list by looking for hidden contacts. I tried the contacts "cleaner app" I had, called Group, which removes duplicates, but it did not find anything. Then I tried your recommended Cleanup app (seach in App Store for Cleanup), and, lo and behold, it found a lot of contacts that should not have been there still. Cleanup removed them all, leaving the list squeaky clean.
Then I turned on MobileMe Contacts again, and after the Contacts list populated, the number agreed with the number on my computer. And the switching of assigned ringtones now works correctly.
So, I basically did what you recommended, but since I am not using iCloud to sync, since I haven't switched to Lion, I did the same thing using MobileMe.
============================ -
My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.
Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you. -
Hi,
While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed?
Thanks!It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres? -
I have no sound alerts on my iphone5. My software is up to date. I can hear on a call but I have no text alerts, no ringtones, nothing that involves sound! Everything was okay a few hours ago. I have no idea how this happened. Please help!!
I tried the compressed air, Qtip, etc... still nothing. Called Apple again.... and we did a complete factory reset from iTunes, wiping everything out... still no sound, which proves that it is a hardward problem, under warranty, I have to have phone replaced No Apple repair centers within 300 miles of me! So... shipping phone off today. Bummer.
-
good night, do not know what is happening can not buy gold with my visa card for itunes gives me error, but I have money on the card, always worked but this time not accepted!!
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.
[discussion moved to Using Flash Player forum]
-
My iPad is asking me for a restriction pass code but I have never set one so I don't know what it is. I'm trying to reset the device because I have sold it.
Try erasing the device using iCloud.com - assuming that you were using iCloud and the Find my iPhone app on the device.
What to do before selling or giving away your iPhone, iPad, or iPod ...
if that doesn't work, try recovery mode.
If you can't update or restore your iOS device - Support - Apple -
I'm trying to reinstall photoshop CS5 in a new laptop (pc) but i have an "The serial number is not valid for this product" error.
I have deactivated photoshop in the old computer.
The old laptop have photoshop installed with the DVD but the new laptop don't have DVD so i downloaded cs5 from Download CS5 products. ¿Maybe doing this is an error?the installation files work the same whether from a disc or download, but there are other ways to mismatch a serial and installer.
Error "The serial number is not valid for this product" | Creative Suite -
HT4623 i make an update for my i phone 4s but i have an error n:3194 how can i fixe it?
i make an update for my i phone 4s but i have an error n:3194 how can i fixe it?
Click here and follow the instructions.
(81615) -
I have a licence for CS design stand 4, but I need to reinstall, can you help?
I have a licence for CS design stand 4, but I need to reinstall, can you help?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html -
The Outlook 2013 "Search People" box does not function properly. It frequently displays incorrect results or a mess of duplicate results. I've reported previous issues about this and consolidating my posts into one (with screenshots this
time). Hopefully this message will be forwarded to or seen by the Outlook programmers. It really needs to be fixed.
Outlook 2010 and other prior versions worked perfectly. You search for name, you get ONE result with the info you're looking for. FAST AND EASY. But with Outlook 2013 Microsoft has created a heck of a mess resulting in huge frustration and productivity loss
with such simple but important tasks.
I have hundreds of contacts stored in my Outlook address book, and they all have COMPLETE contact info added.
One major issue that I'm experiencing in the new Outlook 2013 is that I now get average of 4 or more duplicate name results appearing for the same contact. And each result contains different and incomplete contact info, making it impossible for me to quickly
find the basic info I'm looking for. The cause of this issue is that Outlook 2013 now provides results from not only your local address book(s), but it also shows results based on your email history and social media accounts setup.
And there's no way to turn this off, or at least specify what folders and/or accounts the People Search box should use.
To make matters worse, the Microsoft developers conveniently forgot to add some form of an indicator (like a small icon besides each name result in the list) that clearly indicates what result is from what source. So you must manually click on each
result one at a time and repeat the search until you locate the correct one.
For one specific example, I have a contact stored in my local address book called
Infusionsoft. When I type "Infusionsoft" in the People Search box to quickly find a phone number, Outlook 2013 shows me 7 results with the same name. See the screenshot below:
As you can see in the screenshot above, every result just says "Infusionsoft", so I have to manually click on each name result one at a time and repeat the process until I find the correct one from my address book. This same thing happens with other
random contacts.
From what I can tell, Outlook is pulling results based on based on recent emails I've received from different people with "@infusionsoft.com" in their email address. So the first result shows "[email protected]" (just the email
address), the second result shows "[email protected]", the third result shows "[email protected]" and so forth. I don't want Outlook to show all of that. I just want what's in my address book!
And you would think that the last result would be the correct one from my address book, but no. Sometimes its the 5th result, and other times it's the 3rd or 7th result. So there's no freaking order of things here.
We simply need the ability to turn off searching of email history and other accounts when using the People Search box. Problem fixed.
(And please don't tell me that I need to "link" every incorrect result to one main contact. You shouldn't expect everyone to have to tediously link any and all results that appear to a record. ESPECIALLY when 5+ results for each contact appear regularly.)
ISSUE 2: Some names must be typed in a different way for the Search People to locate them
Another big issue I'm having with the Search People box is that some name searches don’t show the correct result, unless I search for their names in a different way.
For one specific example, I have a contact stored in my address book named "Dave Johnson". When I type "Dave Johnson" in the Search People box, one result appears, but it's just his email address, only. It's not the result that's stored in my Outlook address
book with his phone number, addresses, etc. Screen shot below:
If I type in Dave's name reverse order (Johnson Dave), no results are found at all.
Now if I just type in just"Johnson" all by itself, it finds Dave's correct result (the one stored in my Outlook Address Book). Along with everybody else that has "Johnson" in their name (see screenshot below)...
I double-checked how I have Dave's name programed in my address book, and it's in there as "Dave Johnson" for both the Full Name and File As fields.
Also, the name order shouldn't make any difference when using the People Search Box anyway. Sometimes I can find people by Last Name, First Name or First Name, Last Name. Only with random contacts does it get difficult finding their info and
I have to do strange things like this to find them from the People Search box.
ISSUE 3: Some Search People results only yield an email address only.
For other random contacts, some search results only yield an email address with no other contact details. But I can open the persons contact card from the address book manually, with the same email address shown! Screenshot below...
In the screenshot above, I have outlined the Search People box results in red, and the Address Book results in green. You can clearly see that "Robert White" is a contact stored in my local address book with full contact details, but the Search People result
only shows his email address! Again, it's not consitent. It's hit or miss with different people.
ISSUE 4: Some results just don't appear at all, but they are in the address book
Another issue I'm experiencing with the People Search Box is that some people simply cannot be found. But I can see their contact info just fine if I click on the "People" tab down at the bottom of the page and type in their name in the "Search Contacts"
field. Why can't the People Search box find certain people? I opened up their contact details and cannot find a single thing that would prevent them from showing up in results.
These are clearly serious bugs that need to be fixed. And I'm shocked as to how this got missed--or ignored during alpha and beta testing. I see the "idea" behind the developers having the Search People box search everything outside of the
address book, but in real world application this causes a heck of a lot of problems & confusion, and it needs to be fixed ASAP.
For technical details, I have Outlook 2013 running on two computers using hosted Exchange 2010. One system is Windows 7 and other is Windows 8. The same problems occur on BOTH computers. As far as my Outlook account setup, I have all contacts stored in the
main address book (no sub-folders or other folders).
Can someone help communicate this message to the Outlook developers??? The "Frown" button limits me to 100 characters and one image. There's no way I can communicate this level of detail and steps to duplicate in 100 characters!Thanks for your reply.
1) The instant search boxes in each individual page work just fine. If I am on the People page and type in a name in the "Search Contacts" field, it searches my contacts and displays the results that I want. But I should not have to leave whatever screen
I'm in to find people now. In Outlook 2010 and earlier versions, I could be on the calendar page and then search for a contact without clicking off the calendar completely. For productivity-sake, it's a huge waste of time and hassle now.
2) I'm familiar with how contact linking works, and quite frankly it's a huge mess in general. I NEVER create multiple contacts for the same person. I get that Outlook 2013 get confused now when it detects a LinkedIn or Facebook account for the same person
already in my Outlook address book, but we need to have options that allow us to turn off results from some or all social networks. This is a big part of the problem.
Think about it this way - The average person has 150+ LinkedIn connections, and more for Facebook. Many people today have accounts for both and they are setup with the same email address. When Outlook 2013 has to scan all the networks IN ADDITION to your
local address book(s), it's a no brainer that it can get very confused trying to display results.
Another big part of the problem is that Outlooks new search system also scans your email history. I receive emails from people who use multiple email addresses, or emails from companies with multiple reps or ticket systems that send you a unique
ticket ID # ending in the same email address domain. Now Outlook displays people search results based on everything under the sun in my email history. This is beyond frustrating (see my "Infusionsoft" screenshot above in the first post).
Again, I want to stress that for the search examples I referenced, I only have one entry in my Outlook address book for each person. And that's all I want to find when I search for people--what's already in my own address book!
In summary:
We need an OPTION to turn off searching external networks when using the People Search box
We need an option to tell Outlook to not scan email history for people search results (I think this needs to be disabled entirely actually. It's not helpful at all)
There should be a fixed priority for displaying people search results, with local address book results FIRST, followed by social network results.
There should be a clear icon/indicator next to each result that gives you a clue as to where the result is coming from. Your address book? Facebook? LinkedIn? We should not need to click on each result to get a hint as to where it's coming from.
Work out the bugs in general with the new search system.
One other thing that I didn't mention is that the Search People box also shows results for people I'm not even "friends" or connected with on the different social networks. But I've noticed that some people use the same email address for those networks that
I already have programmed for them in my address book, which is why Outlook sometimes shows me these results. Does that make sense?
I'll try rebuilding the index, but after testing Outlook 2013 on 3 different machines so far and seeing the same results (all slightly different results on each machine and very inconsistent), I doubt this will address the issue. -
Only one ringtone works for all contacts despite them having separate rings
I have 25 rings (is that too much?)
And 33 contacts. The majority of them have their own ringtone.
However, despite me assigning them a ringtone-- only one tone (the one assigned under "Sounds" plays for all of them.
I didn't have this problem before.You said you did not have this problem "Before", before what? What changed?
33 is no too much, I have 50-60 or so, w/o issue.
Try Resetting the iPhone
Reset the iPhone by holding the sleep/wake button at the top right of the device and the home button at the bottom center of the face at the same time. Hold them both until you see the screen go black and the white Apple logo appear. When this happens, you can let go - the iPhone is rebooting.
I have not seen this issue before, so basic troubleshooting may help. -
My ipod no longer shows any contacts from my address book. iTunes when syncing in the info section - contacts - only shows the all contacts tick box, not categories such as 'family', 'friends' etc.
Any thoughts on why this is please?
Am suspecting icloud as a possible culprit.....
ThanksWell start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Cheers,
Patrick -
Change first name/last name convention for individual contacts
Hello. First off, I'm aware of how to set the convention globally under System Preferences. However, what I'm looking for is the ability to set this for individual contacts. This is an issue, because not everybody has an English name, but for those that do, firstname/lastname works better than lastname/firstname -- the reverse is true for those without one.
Basically I just need a way to change this setting for individual contacts. Is there a way?There's no way to edit the setting individually. However, there's nothing to prevent you from putting a first name in the last name field or vice versa if it suits your needs better.
Maybe you are looking for
-
Multiple Users Can't Access Time Capsule Data
My wife and I have two separate Apple MacBooks that share a Time Capsule. We have different account names on these respective computers. I initially set up my Time Capsule and created folders that I can access from Finder.app when I connect over our
-
We are currently unable to save changes against certain business partners in transaction BP due to the error 'No authorization for displaying customers for sales area'. This error appears to be raised because the customer associated to the business p
-
HT201269 old ipod transfer content to new Macbook pro
I am trying to transfer music from my ipod touch to my new macbook pro but i am unable to download the music from the ipod to the itunes on my macbook. any ideas??
-
I am getting error 16 in illustrator CS6?
Need help on error 16 for illustrator CS6
-
Is their any function module for deleting condition record i am trying
Hi Experts, Is their any function module for deleting condition record i am trying this way....... DATA: TABLE (4) TYPE C. DATA: KNUM LIKE KONH-KNUMH DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'. DATA: T681_STR LIKE T681. DATA: LV_NUM TYPE I. GET PARAMETE