Unknown network error code -3212

i recently messed with my nat type with my xbox and started messing with my network settings on my computer. i cannot connect to the itunes store due to the fact of an unknown network error (code -3212). I can connect to the internet via google chrome or safari though. need some help please!!

Hello usmcalex904,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where you're now unable to connect to the iTunes Store, please follow the steps in the articles below.
Can't connect to the iTunes Store - Apple Support
iTunes: Advanced iTunes Store troubleshooting - Apple Support
Take care,
Alex H.

Similar Messages

Since I have downloaded the last update, unknown error code -3212 now stops the link to itunes store. I have removed

How do I fix error code -3212 & connect to itunes again?

Can you try the suggestion posted here?
https://discussions.apple.com/message/22526946#22526946
Thanks!
Harry
Norton Support

TS1424 I have used itunes forever, now when I try to go to the itunes store, it says an error has occured error code 3212, how do I get back into the itunes store

I have used itunes forever, Sunday night when I tried to get into the itunes store an error popped up and said could not open; error code (-3212), How do I get back into the itunes store?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

How do I solve a network error, code 60?

My ical on my imac desktop and I continue to receive a network error, code 60. How do I solve this issue?

Try the last post here by elkclub...
https://discussions.apple.com/thread/2370776?start=0&tstart=0
1. Open iCal on your client computer > Preferences
2. Go to the Accounts tab
3. Go to Server Settings tab
4. Make sure there is a port number entered. It should match the port number being used by the iCal server. Originally, this setting was on "Auto" and it worked fine. The "Auto" option no longer works. Also, be sure to check "Use SSL" if you are doing so. (In my setup, I have it on port 8443, with SSL on.)

Network error (code 32)

I am trying to publish a colleague's iCal calendar to our server over the network. Every is seemingly setup correctly, network connection is fully functional and admin login is correct.
When I hit the publish button, I get an error message along the lines of 'iCal has encountered an unexpected network error (code 32).'
Anyone know what this means? I've searched here and found nothing... Any help appreciated

im sorry i cant help you with your (code 32) error but i do have a very similar error on my a single client iCal computer that gets network error code 60 when it trys to refresh or update from the server.
i cant find what error code 60 means
plz help

Network error code

i'm trying to connect my nephew's ipod mini and download itunes. it appears to be downloading then it stops and gives me a network error code of %APPDATA%\. Does anyone have any idea how to override this. thank you

Hello nicolamcinroy,
And welcome to Apple Discussions!
Since you are referring to issues you are having with downloading iTunes, I would suggest posting this in the iTunes forum, which can be found below. You might have much better luck there.
http://discussions.apple.com/category.jspa?categoryID=149
B-rock

I keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Itunes store error code 3212

I have tried the last two days to get into the Store and keep getting error code 3212. I have done everything suggested in the support area of Itunes store to no avail. I have the the latest version of Itunes. Any help would be greatly appreciated.

1-800-MY-APPLE (692-7753) to contact the Apple Store, from there you can get help. I can't find anything for error 3212. sorry.

I just made my account and when I try to log in it tells me "unknown network error" what do I do?

I just made my account and when I try to log in it tells me "unknown network error" what do I do?

It seems their server is down. I've had problems trying to update apps on iTunes and iPhone.

ERROR CODE -3212 ITUNES STORE

Since March I haven't been able to connect to my Itnues store because of the error code -3212 Not -3221 and the Itunes support center keeps sending me the same crap that doesn't help me. Is there a number that I can call and they walk me through it or can anyone help me asap????

1-800-MY-APPLE (692-7753) to contact the Apple Store, from there you can get help. I can't find anything for error 3212. sorry.

ICal Server Error "An unexpected network error (code 60)"

When trying to create a new iCal calendar on our leopard server I get an exclamation mark next to the server in the left sidebar next to the name of the server. When I click on it I get "an unexpected network error (code 60)"
Thanks

After a lot of trial and error... this might help:
1. Open iCal on your client computer > Preferences
2. Go to the Accounts tab
3. Go to Server Settings tab
4. Make sure there is a port number entered. It should match the port number being used by the iCal server. Originally, this setting was on "Auto" and it worked fine. The "Auto" option no longer works. Also, be sure to check "Use SSL" if you are doing so. (In my setup, I have it on port 8443, with SSL on.)

TS1492 error code 3212

I completed the new itunes update but now it will not connect to store. I get error code 3212 unable to connect to itunes store please check connection, but i am connceted and surfing various support sites looking for help. I am running Window 7....can anyone help?

1-800-MY-APPLE (692-7753) to contact the Apple Store, from there you can get help. I can't find anything for error 3212. sorry.

High number of "Network error code 0x2746" in extended events log

In the extended event log of our database server I see 880 consecutive identical errors, all occurring between
17:00:49 and 17:15:25. The message is:
Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 27 ms, enqueued 0 ms, network writes 0 ms, network
reads 25 ms, establishing SSL 8 ms, negotiating SSPI 0 ms, validating login 0 ms, including user-defined login processing 0 ms. [CLIENT: 10.127.214.32]
The timings in each message are a little bit different. It might be interesting to know the averages for these timings, so here is the message again, now with the timings replaced by averages (rounded to 1 digit):
Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 32.5 ms, enqueued 0.5 ms, network writes 0.9 ms,
network reads 29.4 ms, establishing SSL 8.3 ms, negotiating SSPI 0.0 ms, validating login 0.0 ms, including user-defined login processing 0.0 ms. [CLIENT: 10.127.214.32]
The client is a Citrix server that runs a COTS program. It serves approx. 20 users.
What can be the cause of this? Can it only be the program that automatically tries to reconnect?

Hello,
Please read about possible causes and resolutions on the following resource:
http://technet.microsoft.com/en-us/library/ms187005(v=SQL.105).aspx
Please examine any certificate used for communications. Maybe a certificate has expired.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Problem with PnP devices, Unknown device, error code:28

Hello, my USB Mass Storage Device Not Recognized( Flash drive- HP v156w, 16 GB)
Full story : I opened flash disk, started to loading and opening files very slow, suddenly all writing, names of the files become unreadable. I took off the flash disk and try again. I got the message- disk have to be formated to be used
again. After a lot of try I got this message:
Unknown device doesn't have a driver ; and Problem with PnP devices when i run trouble shoot in devices and printers on my Sony VAIO laptop( Windows 8, 64 bit), and error code:28 for unknown device doesn't have a driver.
Do other usb devices work ok in the same usb port? - yes
Has someone else/or you used it on another pc?- yes
Does it work ok on a different pc? - the same problem
Did you pull it out with using 'Safely Remove Hardware'? - yes, a lot of time after its become invisible, unknoun
Was it previously working ok with your W8 laptop? - never tried befor
Disk Management can't see the drive.
device manager:
usb device with yellow sine and instead name strange sines
divice tipe - other devices
manufacturer - unknown
location- on USB Mass Storage Device
status: The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
I have done that -
"open device manager make sure show hidden devices is ticked and right click on all the USB hidden devices and unistall them. once done reboot and put in the flash drive again and see if windows finds it."
situation the same(((( Disk Management can't see the drive.
please if any one know the fix please help
Its very important info for me on the flash disk.

I'd ask them over here.
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Network error code 0x80070035

Hello
I have router Siemens SE555 with USB File server enabled and i have one disk connecetd on it. On Windows 7 when I wont to access to disk I get massage Windows cannot acecess \\NetworkDisk. I also have one PC with Windows Vista Business and one with Windows XP and both off them can access to that disk.
I get code: Error code: 0X80070035 The network path was not found.
Please if anyone can tell me what to do?
Thanks

Since you are able to see and access Computer 2 from Computer 1 and unable to see computer 2 from computer 1. I would suggest you to first check with both the computer if the Network discovery is turned on both the computer.
To turn on network discovery
1.Open Advanced sharing settings by clicking the Start button, and then clicking Control Panel. In the search box, type network, click Network and Sharing Center, and then, in the left pane, click Change advanced sharing settings.
2.Click the chevron to expand the current network profile.
3.If network discovery is off, under Network discovery, click Turn on network discovery, and then click save changes. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Also you may access the link and follow the steps and check if it helps to see the computer 2.
http://windows.microsoft.com/en-us/windows7/Why-can-t-I-connect-to-other-computers
Also you may verify if you can access computer 2 from computer 1 by opening with the run command and typing the IP address of computer 2.
To do this, follow the steps in computer 1.
1. Click on Start
2. In the start search box type \\ipaddress\ of the computer 2 and press enter eg: \\192.168.0.2\
Check if this opens and connects to Computer 2 in the network.
Also you may try to boot both the computer in safe mode with networking and see if they are able to see each other. To boot to the desktop in safe mode with networking keep tapping F8 key during restart. Once you see the option to boot in safe mode with
networking select it and press enter.
Access the link to know more about how to boot the computer in safe mode:
http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

Unknown network error code -3212

Similar Messages

Maybe you are looking for