Unknown Number Issue?

Hello on previous blackberry's I have relied on pressing the green phone to find my number. It now says Number Unknown next to My Number:
It is over a week old and the phone is all completely registered.
ANy ideas how I can alter this to addmy number or a specific update?
Thanks
Twitter: @Jaker2k
Solved!
Go to Solution.

Sorry It errored when I explained how to do it. Couldnt have done it without your help.
All pretty similar but with new OS I did the following:
Options > Device > Advanced System Settings >Sim Card > Then pressed the options button and Edit Sim Phone Number.
Thanks Again
Twitter - @Jaker2k

Similar Messages

Showing dynamic and unknown number of images in SSRS report

I am using SSRS 2008. I need to display an unknown number of unspecified images on the report.
Basically I have a webpage, where the user selects a specific ID (ex. 24) from a dropdown and then click "View Report".
The report should then display any images, associated with that ID. The only thing I know about the images, is the path to where the images are stored. The path is kept in a database, so I should be able to retrieve the path ok.
But then how do i get the report to display the images, when I do not know the name or number of images?
Please help.

Hi dukie4lif,
According to your description, you have a report to display images selected by users. Now your issue is, the users select a specific ID to get images, but you only have the path of images stored in your database. Is my understanding correct?
For your requirement, if the users want to get images by selecting a specific ID, this ID must be stored in database and associated with the path of those images. Otherwise the database can never query any records with this ID if it doesn’t have any ID stored.
Now we need to go to your database, create one more table or add one more column in the table which have your path stored to store those IDs, and let them associated with those path. Use a parameter in this report for users selecting IDs. Then your goal will
be achieved.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

Calls from cucm to CME not working-unknown number

hi all
we have cucm 9.1 and gateway 2911 on the side A and on the side B we have uc540 , we have configured tunnels between 2911 and uc540, calls from cucm SideA to uc540 Side B is ok and working fine. now we have one 9951 phone which gets ip from uc540 (side B) and tftp is our cucm IP.9951 phone is registered in cucm and calls from cucm to that 9951 phones are working fine. now problem is call is one sided between uc 540 local extension and ip phone 9951.
9951 which is registered on cucm can call uc 540 user but spa 504 phone which is registered on uc540 cant call to cisco 9951 phone gets error "unknown number"
i am attaching debug voice ccapi inout with this
kidnly help me to solve the issue ASAP

here is show voice register all.i am surprised to see dial peer 20002 but there is no dial peer like that i dont know where its getting this dial peer 20002.extension 2002 is registered with my call manager.
Router#sh voice register all
VOICE REGISTER GLOBAL
=====================
CONFIG [Version=8.6]
========================
Version 8.6
Mode is srst
Max-pool is 0
Max-dn is 0
Outbound-proxy is enabled and will use global configured value
Security Policy: DEVICE-DEFAULT
Forced Authorization Code Refer is enabled
timeout interdigit 0
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US Active registrations : 0
Total SIP phones registered: 0
Total Registration Statistics
Registration requests : 0
Registration success : 0
Registration failed : 0
unRegister requests : 0
unRegister success : 0
unRegister failed : 0
Attempts to register
after last unregister : 0
Last register request time :
Last unregister request time :
Register success time :
Unregister success time :
VOICE REGISTER DN
=================
VOICE REGISTER POOL
===================
Router#

Unknown number in profile

I have a contact in Skype account where I see an unknown number in his account only when viewed from my account. I synced my Skype account in Windows Phone so I get two numbers for this contact. We logged in his Skype account profile and there is only 1 number specified. I am not sure where is that another number coming from. Below are the images attached of that contact (skype account, windows phone account).
This is really wierd. Can someone have any suggestions for this issue?

Skype for Windows Phone currently only shows the primary mobile number from the Skype profile of your contact. Other Skype clients support saving additional numbers for contacts of yours which seem to be the case here. You can edit/remove this number e.g. by using Skype for Windows desktop or Skype for Mac
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Profiles - Advanced - Normal - Phone (Unknown Number) ??

My BB8820 shows the following items in the menu under Profiles - Advanced for the "Normal" profile:
Browser
Calendar
Level 1 Messages
Messages(Desktop)
Messenger - Alert
Messanger - New Message
MMS
Phone (Unknown Number)
Phone (Unknown Number)
SMS
Tasks
Why does "Phone (Unknown Number)" appear twice?
Both items access the same settings; if I click one of the two and change something, the same change is seen when I click on the other one.
Is an "Unknown Number" one with caller ID suppressed, or just one that doesn't appear in my contacts?
If these settings are only applied in the case of an "Unknown Number", how can I determine what happens in the case of a known number?

Hi and welcome to the forums!
Here is the user guide for the 8820:
http://na.blackberry.com/eng/deliverables/1224/userguide_bb8820_wifi.pdf
If you need more information, please ask!
If not, please resolve the post using the options by the kudos’ star.
Just check the post that had your answer!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

My Number : Unknown Number

I am using Blackberry Curve 9330 3g (CDMA) handset. When I press the green button then above the dial pad it show my number unknown number. Is there anyway to resolve this issue.
I searched all over but I can't find support regarding this issue. There is only support for GSM handsets. I contact to service centre also but they also are unable to resolve my problem. Is there anyway to resolve this issue?
Thanks in advance.

Is that big issue? Does your device work fine?
Any who here some info that could help you --> Sim card number, system settings - security and privacy - Sim card - edit phone number (put your number in)
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How do i dial international numbers... I get unknown number

I got a tmobile 8220 that I unlocked so that I can use in Chile vacation. I try to dial a number and it goes back to the placed calls menu and it says My number Unknown number. I am not sure if that is the real error or it just doesn´t know it´s own number. One time the phone tried to add my US area code to the number. So I was wondering if this is a phoen issue or if it´s a cell phone company issue. The number is 8 digits. x-xxx-xxxx (first x is the region code)

Good to know that you've resolved the issue by yourself. Please resolve the threat by accepting the solution button.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

My 9320 blackberry keeps showing unknown number when I already have them in my contact list

I have tried everything to change my settings that I can see how is phoning me but nothing works please help!!!

Hello stefnie,
Welcome to the forums.
Have a look at the below thread which may help you out with your issue.
http://supportforums.blackberry.com/t5/BlackBerry-Bold/All-incoming-calls-are-from-UNKNOWN-NUMBER/td...
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Calling ID is Unknown Number in Incoming Calls

Dear All
i have CUCM 7.1 and h323 gateway , my issue is :
Some times , not always , the calling Id is giving " Unknown Number " in incoming calls
what is the problem and how to solve it ?
thanks

do you see the calling number provided by ITSP in the GW for those faulty calls?
what is the connection to pstn? isdn pri? if so, collect debug isdn q931 to check whether or not the itsp provides the caller id? It could be issue with provider too.
Please rate all the useful posts

My iPhone 3G always shows an Unknown number calling when I've got that person's contacts, What should I do?

When someone calls me, my iPhone 3G keeps on showing that it's an unknown number calling when I've got that person in my contacts.
What can I do to solve this? Thanks.

Simmilar issue here!
Summary: Incoming calls show up only as phone numbers, not with the caller's name.
Steps to Reproduce:
1) On your iPhone, save a person's phone number in Contacts with the country's dialing code in front (+ZZZ-XX-YYYYYYY, where +ZZZ is the country code, XX is the carrier, YYYYYYY is the person's phone number);
2) Make a call from that person's device/number to your iPhone;
3) On your iPhone, while ringing, shows the above number without +ZZZ and without the person's name.
Expected Results: No matter how the number is saved (as +ZZZ-XX-YYYYYYY or simply as XX-YYYYYYY) the caller ID should always show up, as in previous iOS editions.
Actual Results: Caller ID does not work as expected and as in previous iOS versions.
Notes: When I receive voice calls, the number comes in without the country dialing code in front, simply appears as XX-YYYYYYY (where the XX is the carrier code and YY is the number) and the caller's name does not appear. In my address book ALL my contact's telephone numbers are preceded with the corresponding country dialing code, because i travel a lot. If I delete the country code from a contact's phone number, and that number calls me, then the person's name appears. I'm am in Angola (country code +244) using iPhone 4, iOS 5, carrier: UNITEL (92)
On the other hand, SMS's are OK, i.e. the Caller ID is linked to the phone number and shows up (because SMS's are receiver with the country dialing code in front of the phone number, p.ex. +244-XX-YYYYYYY).
It has something to do with the Carrier Settings Update as in iTunes i get the error message 1630 which states that: "iTunes could not check for un update to the carrier for your iPhone. An unknown error occured (1630)."
Thanks

Blackberry z10 unknown number settings

My blackberry z10 unknown number settings pls
Subject Title edited to reflect new topic.

Hi and Welcome to the Community!
Please add details, from those few words, I cannot understand what your request or issue is. Please clarify.
Let us know.

Add Listener to Unknown Number of JMenuItems

How can I add an ActionListener to each JMenuItem by cycling through an unknown number of menu items?
I have a program that prompts the user for a database, then creates a JMenu of table names based on whatever database the user selects.
This means that I don't know the table names or number of tables that will be added to the JMenu.
I need to add an ActionListener to EACH JMenuItem. The problem is that I am only able to select one table from the menu. Subsequent menu clicks (on different table names) have no affect on the output.
Here is an excerpt of my code:
ResultSet rs = md.getTables(null, null, null, types);
while (rs.next()) {
tables.add(rs.getString("table_name"));
for (Iterator i = tables.iterator(); i.hasNext(); )
String table = (String) i.next();
JMenuItem mi = new JMenuItem(table);
j1.add(mi);
mi.addActionListener(this);
[END CODE]
Thanks for any help you can give!

I got it. It turns out that I WAS setting the listeners correctly. My additonal output was "hidden" in the window. I found it by pure luck when I expanded the window size.
I added a line to remove all components from the JPanel before adding a new one and this "refresh" worked.
Thanks fot the help anyway! It is greatly appreciated.

Uploading a text file with unknown number of texts

Hi ,
i have a flat file with around 10,000 record's.
each material number followed by different lengths & unknown number of text's separated by delimiter '$',
that need to be saved using save_text function module.
the file is as follows,
record 1 :     material1$text1$text2$text3
record 2 :     material2$text1$text2$text3$text4$text5$text6$.....
record 3 :     material3$text1$text2$text3$text4$text5
record 4:      material3$text1
- - - - - - - - - - - - so on ....
i created the following structure , to split and save each text separated by '$' , to save in TLINE of save_text function module.
types : begin of ty_file,
              matnr type mara-matnr,
              text1 type string,
              text2 type string,
              text3 type string,
              text4 type string,
              text20 type string,
           end of ty_file.
i have uploaded the file and saved in table it_file type ty_file.
loop it_file into wa_file.
   split wa_file at '$' in to matnr text1 text2 text3 text4 ....... so on.
endloop.
please, suggest me an alternate way to reduce the code, instead of creating a structure like above, so that each splitted text
stores in a single variable and is passed to TLINE of corresponding material, in save_text function module
thanks
viki

Hi,
The flat file contains , material No. followed by it's text , each text sepearted by '$' symbol.
For each material i have to get all lines of text, and passed to tables paramter of save_text.
The Number of text' for each material is varying.
Please kindly suggest me , how many variables i need to create to hold each splitted text and store it in Tline
I wrote the below program assuming that the material number has maximum of 20 texts, it's working fine. But, what if the number of texts exceeds 20.
file :
4907507$ Druckrolle$ Durchmesser: 218 mm$ Länge: 750 mm$ Rollenwerkstoff: 1.4301/1.4541$ Oberfläche: gummiert$ Stärke Gummierung: 10 mm$ Näscher    E 71224$$$$$$$$$$$$$$
1149598$ Tragrolle$ mit Stützringen$ Norm: ähnlich DIN 22112$ Durchmesser: 89 mm$ Mantellänge: 800 mm$ Form der Achsenden: A2$ Achsdurchmesser: 25 mm$ Achsanflachung: SW 18$ Einlegelänge: 808 mm$ Achslänge: 834 mm$ Lagerbezeichnung: 6305$ Anzahl Stützringe Form A: 6$ Anzahl Stützringe Form B: 4$ Anordnung links: 4$ Anordnung mittig: 6$ Anordnung rechts: 4$ Qualität Stützringe: N$ Durchmesser Stützringe: 159 mm$ Anzahl Zwischenhülsen: 7$ Anzahl Schlussscheiben: 2$ Erbö   3111.800.05.68
file upload
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
    CHANGING
      file_name = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = gd_file
      FILETYPE            = 'ASC'
     HAS_FIELD_SEPARATOR = 'X'
     HAS_FIELD_SEPARATOR = '$'
    TABLES
      DATA_TAB            = It_data.
loop at it_data into wa_data.
    split wa_data-line at seperator into matnr_txt text1 text2 text3 text4 text5
                                               text6 text7 text8 text9 text10 text11
                                               text11 text12 text13 text14 text15
                                               text16 text17 text18 text19 text20.
    move matnr_txt to wa_material-matnr.
    move text1 to wa_material-text1.
    move text2 to wa_material-text2.
    move text20 to wa_material-text20.
    append wa_material to it_material.
    clear wa_material.
endloop.
loop at it_material into wa_material.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text1.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text2.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text20.
    APPEND WA_LINE TO IT_LINE.
    G_THEAD-TDNAME   = wa_material-matnr. " material number
    G_THEAD-TDID     = pa_id.                           " 'GRUN',
    G_THEAD-TDSPRAS = pa_langu.                " EN
    G_THEAD-TDOBJECT = pa_obj.                   " MATERIAL
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                           = SY-MANDT
        HEADER                        = G_THEAD
        SAVEMODE_DIRECT     = 'X'
      TABLES
        LINES           = IT_LINE
      clear : wa_line, g_matnr.
      refresh it_line.
endloop.
Edited by: jvsvijay on Jul 28, 2011 12:51 PM
Edited by: jvsvijay on Jul 28, 2011 12:53 PM
Edited by: jvsvijay on Jul 28, 2011 12:55 PM

HT5961 I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number

I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number, so how can I change it to receive it on my cell phone ?

I found this in the iCloud Keychain FAQs:
How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
- Your iCloud Security Code
- The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
- If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
So it seems that you would have to directly contact the Apple Support: http://www.apple.com/support/icloud/contact/

2 issues - Invalid Serial Number issue & Lightroom 5 Trial vs full version folder hierarchy question

Hello
not sure if I should split these two questions...
1 - Invalid Serial Number issue
I'm helping out a friend with their large photo collection and they bought Lightroom 5 and received the serial number but when we add this to Lightroom it states that it's invalid - I tried leaving it until the following week (I visit them weekly) and it still refusing the number - when I went into their Adobe account and took a look at downloads the option to download the full version is greyed out (or an x - I'm not sat on their computer right now so can't double check) but it wouldn't allow me to do anything so we just had the trial version.
anyone know what the issue is - shall I get them to contact Adobe to get them to take a look - I also had issues trying to find a customer support email address lol. (I seem to faffing with lots of websites/software/companies this week so getting a little frazzled!)
2 - Lightroom 5 Trial vs full version folder hierarchy question
This question is linked to the above i- I am wondering if the folders in Lightroom are different in the trial version vs the fully paid version.
I had set up some greeting card templates and contact sheet layouts for my friend and tried to transfer them to her computer but whilst, LR 'sees' the folders it just doesn't acknowledge the templates - I tried it several ways but I've not had that issue before so will that sort itself when I get the serial number fixed?
Thank you for any help or suggestions - hope you all have a good weekend :-)
Lenny

Hi Lenny, the two questions may be related but the trial is actually the same as the full version. I would suggest getting the serial number issue sorted out first. There have been known issues where a paid for product still shows up as a trial.There is not a lot the community can do. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Lightroom
2. Serial number issues or activating my product
3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away.
Click here to get help now Contact Customer Care

Unknown Number Issue?

Similar Messages

Maybe you are looking for