Unknown Paragraph format HT

Hi Friends,
I have a problem in the smartforms... we created the smartforms for the schedule lines when we release the scheduline from MM side the system is generate the smartforms in the processing log one warning msg is coming saying "Unknown Paragraph format HT". But in the style or in the smartform we dont have the format HT.
Kindly suggest on this.
Thanks and regards,
Satish

Similar Messages

Unknown Paragraph format in Upgrade Project

Hi All,
I am getting 2 different warning messages in SAPScript.
1. Unknown Paragraph format <PF_Name> even though the paragraph format is defined properly in the Script.
2. Include expansion not possible, as at least one parameter is a symbol, even though the Standard test exists.
Can anyone please help?
Full reward points will be awarded for helpful answers.
Thanks,
Naba

Hi Sairam,
I have deleted and re-created the Paragraph format with the same name and credentials, but the problem is still occuring.
Could you please suggest some other alternative?
And also regarding the "Include....." warning?
Thanks,
Naba

Unknown Paragraph format warning in SAPSCRIPT

Hi All,
I am getting 2 different warning messages in SAPScript.
1. Unknown Paragraph format <PF_Name> even though the paragraph format is defined properly in the Script.
2. Include expansion not possible, as at least one parameter is a symbol, even though the Standard test exists.
Can anyone please help?
Full reward points will be awarded for helpful answers.
Thanks,
Naba

The second warning is probably due to a statement something like,
/: INCLUDE &TEXTNAME&
As the SAPscript checker cannot find the name of standard text it cannot be certain it will exist. Provided the variable is populated with a valid name at runtime there will be no problem.
The message can be ignored.
Regards,
Nick

SAPscript paragraph format question

I have a paragraph format called 'ZX' in first sapscript. I am able to enter into graphical PC editor in this sapscript. I am using this paragraph format while defining a address in one window.
I also have the same paragraph format 'ZX' in a second sapscript and using it for defining a address. When I tried entering into graphical PC editor for this second sapscript, it says 'Unknown paragraph format ZX' !
Is there any place where we have to assign paragraph format to the sapscripts? I am confused why this error is coming for the second sapscript.
Thanks in advance for your input,
Krishen

I Guess You have to define the paragraph format for the second script in the second script only..I dont think you can use the pragraph format of one script in the other.
- Guru
Reward points for helpful answers

How to create paragraph format in smartforms

Hi All,
Let me know how to create paragraph format in smartforms?
Thanks&Regards
Mahesh

Hi
When we create a smartform we can see in global settings , form attributes.
In form attributes we set the over all style of the smartform. Goto form attributes and open the tab output options. Here you can see the Style box. In this style box we enter the smartstyle created in transaction code smartstyles.
Open transaction smartstyles.
Create a new style.
Upon creating a new style you will see 3 folder structures under style name.
1. Header data
2. Paragraph format
3. Character format
To create paragraph format right click on the paragraph format node and click Create Node. Give it name. Now you will get a screen with 4 tabs.
Indents and spacing
Fonts
Tabs
Numbering and outline
Here you can provide the look you want.
Now add this smartstyle in your smartform's form attribute.
You can also provide individual smartstyles to each text element you create by giving the name of smartstyle in its output options tab. Each text element has a individual output option tab here you can give any smartstyle.
Click on the general attribute tab of any text element and give the paragraph format directly or by going to SAPScript editor mode.
Any more questions you can ask me directly mailing me.
Please do reward points if satisfied.

For SAPscript INCLUDE TEXT, how to align as Paragraph format

Hi experts and ABAP colleagues!
Need your help on this sapscript problem:
How to align texts taken from "INCLUDE TEXT" in SAPscript, according to tab defined in Paragraph Format?
For example, I defined BG to have tabstop at the 2nd column (or equivalent to 1st tab position) where I need to print the text, and then declared it in SE71 like below:
However the text prints at the leftmost instead of at the 2nd col position - (8th char tab defined in par. format BG). Hence it is not aligned to its proper heading. Line Number instead of Description - which is not okay for client view that needs these Thai texts.
The technical details I included below. Kindly examine:
1.) Window >Main > Text Element > Include Text command
/E   ITEM_TEXT
BG   ,,&TTXIT-TDTEXT&
/:   INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID&
/:   NEW-PARAGRAPH BG
Note: I used command "NEW-PARAGRAPH" and had exactly the above code in se71. Anything missed here? Pls. help. Thanks.
#2.) Paragraph Format > Tab
No. -
Tab Position -
Alignment
1            8,00 CH            LEFT
2            28,00 CH          CENTER
etc.
Note:   and then i put in ",,&TTXIT-TDTEXT&" (see above) with the 2 comma's beforehand to say that its on the 1st tab or at the 8th character where it should be printed, but does not give intended result... pls help.
#3.) Paragraph Formats > Standard Attributes
Left Margin - 0 cm
Alignment - Left
no blank lines checkbox - ticked
Note: Is there any more attribute i can manipulate from here to force display at the right position?
Thank you so much in advance for all your help. Our project team will really appreciate it. May the Lord bless you as we go through our SAP work!
Sincerely,
Celeste

Here's a thought, instead of using tabs, try writing a method that takes a string that is the starting string, a pad character, and a length and returns a string padded to that length with the specified character.
public String padR(String src, String padChar, int len)
    // ... You get to fill in the rest suggestion try to do it without a loop
}Have fun,
PS.

Unknown File Format Error while Uploading file through SFP in Note Implemen

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing the manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Unknown File Format Error while Uploading file through SFP

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Error in file receiver channel "Unknown payload format 0 in the message"

hello
there is an errror in my receiver file channel with the status "Unknown payload format "
my channel is file receiver channel.
we implemented one sap note 1295430 and after that channnel is giving the error.
Please forward your views.
thanks.

Hi there,
First of all, what TBDL means - It means that the message was successfully delivered from Integration Server and that the messages are handed over to the Messaging System.
TBDL occurs when the message is put into the receiving queue of the Messaging System.
What can be done?
Go to Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>/<PROTOCOL>
If this was executed successfully, then the MS returns HTTP 200 to the Integration Server and the status TBDL moves to DELIVERING (check whether you have authorization to go to the above link).
--> Log-in to SAP using - XIAPPLUSER & XIAFUSER, and check if they are blocked
--> Check the messages:
AF
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
AS
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
Also, worth reading - /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Let us know if you have more questions.
regards,
Neetesh

TAB in paragraph format for Script

hi,
i am doubt with the tabs for paragraph format in the script. how actually it work? i try to make change on the tab, but some time even i put a larger value, the space in the output will become smaller, can anyone explain to me how the tab actually work?
thanks

Thanks you very much.
but one more question, let say, if i have 3 tabs for an output.
HARLO,,MY,,WORLD,,!
any i configure the tabs as, 20, 30,15 all in CH
so after the "HARLO, it will have 20 CH of spacing, follow by "MY", 30 spacing, and 'MY" 15 spacing, end with "!"?
it this the way it works?
or it works in accumulate way, which include the text display as well?
i found in the forum, say that, it will fix the length of a field( if i display a field), even there is no any value in that field. so how does it work on this?
alot of question very thansk for the temper.

Problem in creating new/changing paragraph format in sapscript

hi,
i am developing new sapscript form
based on standard sapscript : SD_PICK_SINGLE .
The problem is that I neither can't create new paragraph format in se71
for this form nor change an exist paragrapf format .
does anyone encountered such a problem
and can help me solve it ?
ami

Hi,
     You have copied the Standard Sapscript, but i think you have not converted the Original Language "DE", as the standard one will be in "DE", so it is not allowing you to create new paragraph format or any changes.
      Open the copied Zform in DE language, Click on Menu> Utilities> Convert original language,
      Give From = DE
              To    = EN
Save and Open the Same Zform in EN language and do any modification.
Regards
Bala Krishna

Replace a paragraph format with another in the every page

I am doing some cleanup before exporting and I don't know much about FrameMaker....
I want to replace the paragraph format ABC with XYZ in every page, how would I do this?
I also have a paragraph format I want to delete and make it just a Normal paragraph in every page, I image it will be the same process as 1?
Your help is appreciated

Try this …
make a back-up just in case
find a paragraph with the style you want to apply (XYZ, in your example)
select Edit > Copy special > Paragraph formatthis copies the format to the clipboard
open the Find/Change dialogue
put the cursor in a paragraph using the format you want to replace (ABC in your example) and select Paragraph tag from the Find pulldownif you're in luck, FM may well read the current format from the cursor position; if not, type it in
select By pasting from the the Change pulldown
click [Change] to see whether the result is what you expect
click [Change all] once you're feeling confident
Use the same technique to replace all occurrences of the style you want to delete (PQR, f'r instance) with another style, then delete PQR using the paragraph designer

Multiple character formats in a paragraph format

Hi. I've searched the general discussion and did not find this issue.
I have one paragraph format called Bomb that consists of a Wingding character (M) in the Numbering tab that prints a little black bomb in a side head. I combine with format with two other paragraph formats called Caution and Warning. These formats are in column and use a red, bold autonumber (CAUTION, WARNING) followed by a couple of spaces--the text goes immediately after the spaces.
My bosses now want the bomb symbol and the CAUTION/WARNING word in the side head, with the text in column. I can't see how to combine that Wingding character with the regular Verdana word. I had to do something similar with my Note format, except that I put the word "note" by itself as a side head and created a format to follow it called NoteAft for the text.This way, I have a line with the Note format, followed by a paragraph return, then the NoteAft format for the text.
I'd rather not have to use three formats to replace the existing two for Caution/Warning, so I hope y'all can help me figure out how to handle this thing.
I appreciate your suggestions! BTW, I'm using FM 7.2 but will want to switch over to 9.0 when my bosses agree.
Dimi Everette

OK, I managed to answer my own question!
Bomb para format: tab at 0.2 cm (not sure that's required...), Next Para tag is CAUTION; default font is Verdana; Run-In Head with no default punctuation; Numbering tab has Autonumber format checked, M in text field with Wingdings char format; defaults for Advanced and Table Cell tabs.
I press Return and CAUTION appears.
CAUTION para format: no tabs, Next Para is NoteAft; default font is Verdana; Side Head--Alignment: First Baseline; Numbering tab has Autonumber format checked, CAUTION in text field with RedBold char format; defaults for Advanced and Table Cell tabs.
I press Return and type the text of the CAUTION in the NoteAft style.
I'm going to change that Para tag to BombCaution and create another para tag with for BombWarning and be set! Of course this won't work unless your master page uses a column with room for side heads.
If you know of something more elegant, please pass it along.
Dimi

Use of "Next paragraph same page" check box in paragraph format of SCRIPT?

Hi Guys,
What is the use of "Next paragraph same page" check box in paragraph format of SCRIPT?
Don't Send me the F1 help ....i am not clear with that help it is quite confusing.
Provide example if possible.
Solutions will be rewarded.
Regards,
GURU

Hello.
You probably know the idea of PROTECT command. It makes that a paragraph wont break in two. If it fit's totaly in one page it will print in that page. If not, it will print totaly in the second page (won't break at the middle).
The checkbox you are asking, makes the same with two paragraphs. This means that if you have paragraphs A and B (A becomes first) and if paragraph A has that option, the next paragraph won't break, and appear in the second page. If paragraph A is in first page, paragraph B will print in first page too, or they will both print in second page.
Try it.
Best regards.
Valter Oliveira.

Unknown file format when downloading map loader?!?...

I downloaded nokia maps from the nokia website and then nokia map loader but for some reason a get a message on my n73 saying that the nokia map loader is an unknown file format...can anybody tell me what to do??

I assume you're trying to install the map loader on your computer and not on your phone
If you can't get map loader to work, you could try this map loader alternative: http://nokiamaps.moo.no . You don't need to install anything for that.
symbian programs & themes, nokia maps for any browser on any operating system of your choice, and other tricks to tame symbian: http://symbian.site666.info

Unknown Paragraph format HT

Similar Messages

Maybe you are looking for