Unknown parameter PHY_MEMSIZE a check cannot be performed to APP servers

Hi Gurus,
We have add a parameter PHY_MEMSIZE in RZ10 to App servers, when we added this paratmer in app servrs we got a message like
W:unknown parameter PHY_MEMSIZE, a check cannot be performed.
Aftergetting this message we proceed further. but when we tried to start the System the App servers were not displayed in MMC of CI. these systems are wroking in Cluster env.
These systems are under Windows NT, ECC6 with DB 11.2.
So could any one please give whether it a problem ? because why I asking is the appsers are not started when we started the CI, We have restarted these appserver manually, why this was happend

appsers are not started when we started the CI, We have restarted these appserver manually, why this was happend
What your cluster log says? Check the error and correct it.
Regards,
Nick Loy

Similar Messages

REP-3131: Parameter form boilerplate text cannot fit on the page

Dear members,
I am getting the following error while running the report :
REP-3131: Parameter form boilerplate text cannot fit on the page
can any body tell me how to correct it. I need to add a extra field in the standard oracle report "RECEIPT TRAVELER". when i was trying to run it in report builder 6i i got the above mentioned error. please give ur quick replies.
thanks
regards
sandeep

When you add your new field into the parameter mask, please check, if the value is too
long for your parameter mask site. Make a double click on the master attributes of your
report in the object navigator and look at the size of the parameter mask window.
Make it bigger, if you want (vertically und horizontally size).
Check the length of the text of your parameter mask title, too.

Error restoring SQL 2008 R2 DB into SQL 2012: BACKUP LOG cannot be performed because there is no current database backup.

I have a SQL 2008 R2 database that I am trying to move to 2012. Made a full backup of the database in 2008 R2. Recovery model is Simple, compatibility level is 2008 Went to 2012, created a dummy database, did Tasks--> Restore -->
Database , located the backup file, selected it, changed the file locations and tried to restore the backup (with overwrite option), got the following error:
BACKUP LOG cannot be performed because there is no current database backup.
This is a simple task that has always worked in 2008 R2. Does anyone know what the problem is and a possible solution?
Thanks

Hi,
This error occurs when the database recovery model has been changed to Simple and/or the recovery model has been changed back to Full but a full backup has not been performed since the change.
If a full backup has been performed, the following conditions will require that another full backup be taken:
· The recovery model had been changed without taking a full backup
· A SQL maintenance plan task had changed the recovery model (reindexing can cause this)
· A backup specifying TRUNCATE_ONLY had been run on the database
· The database was detached from another server and attached to the current server
Additionally, if we take full database backup after the Database is set to readonly, Then transaction log backup we will end up with this error. This is expected behavior. I have list an example within the link below.
Please check above conditions and fix your issue, if you have any concern, please let me know.
Example:
BACKUP LOG cannot be performed because there is no current database backup.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/b5c36e60-836f-4c9e-b9d7-3fb3f3ee4d37/backup-log-cannot-be-performed-because-there-is-no-current-database-backup
Thanks
Candy Zhou

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!

My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.

http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

Parameter LOG_ARCHIVE_DEST destination string cannot be translated

Hi,
After change in spfile and restart to mount mode, I got the error. (System is RH EL4.0 Oracle 10g)
SQL> startup mount
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORA-16032: parameter LOG_ARCHIVE_DEST destination string cannot be translated
ORA-07286: sksagdi: cannot obtain device information.
Linux Error: 13: Permission denied
Another try from pfile which was in sync with spfile, I got
SQL> startup pfile=/u01/app/oracle/product/10.1.0/Db_1/dbs/initorcl.ora
ORA-32006: LOG_ARCHIVE_START initialization parameter has been deprecated
ORA-16032: parameter LOG_ARCHIVE_DEST destination string cannot be translated
ORA-07286: sksagdi: cannot obtain device information.
Linux Error: 13: Permission denied
In the init.ora file, the parameters looks OK. And I can cd to the location from unix console. What can be wrong?
*.log_archive_dest='/home/oracle/backup'
*.log_archive_format='arch_%t_%s_%r.arc'
*.log_archive_start=TRUE
The 3 commands I've issued before shutdown are:
SQL> alter system set log_archive_format='arch_%t_%s_%r.arc' scope=spfile;
System altered.
SQL> alter system set log_archive_dest='/home/oracle/backup' scope=spfile;
System altered.
SQL> alter system set log_archive_start=true scope=spfile;
System altered.
SQL> create pfile from spfile;
File created.

Linux Error: 13: Permission deniedWhat user is owner of the oracle processes?
If it is oracle:dba then check whether /home/oracle/ and /home/oracle/backup is have appropriate ownership and rights

Beasrv.exe The requested operation cannot be performed on a file with a use

Hi guys,
I am trying to upgrade WLS from 10.3.3 to 10.3.5
But I got the following:
Fatal error occurring during the installation. beasrv.exe(The requested operation cannot be performed on a file with a user-mapped section open).
I search in taskmgr this proccess but it does not here.
Also restart the server and nothing. And also unzip again the patch to another folder and it does not work.
Any help guys?
Thanks in advance

Do you have a node manager (or WebLogic server) installed as a service?
These should be visible in the task manager as beasvc.exe.
To check if there are services installed, open your service environment and look for the entries
such as: Oracle WebLogic NodeManager or beasvc domain_name.

FRM-41003: This function cannot be performed here.

FRM-41003: This function cannot be performed here.
Cause: You tried to perform a function that references a table, but current block does not correspond to any table.
Action: No action is necessary. You cannot perform the requested function on this block.
Can some one tell me in which scenarios this error will come?
Cheers
Ram Kanala

Check if the block where you are performing execute/enter query are linked to any table/view of the database.
check the data source property of the block. If it is blank, i.e., if your block is a non-database block, the calls to enter/execute query will return the above said error.
-Hemangi

BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs

Get message BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs.
Documents created brand new in BI 4.0 .
Some docs open fine.
Get message even when log in as Administrator.
Windows 2008 Server Oracle 11.2.0.1
Any idea what causes this.
Many Thanks

Hi,
Thanks for reponse.
Distributed environment 1 server hosts web application server (Tomcat), 1 server hosts BOE components.
Contacted BO support and we did right click on document/modify and get error message you referred to.
However - also get this message when try right click modify existing web intelligence sample reports or even try open which ship with the product and have never been modified.
Checked that file referred to exist in Input frs and does.
Logged in as Administrator so not permission-realted.
Thi seems like a huge bug to me that can't vene open the webi sample reports which ship with the product.
servers look fine - I'm only one using and can create ans save reports fine just openiong or modifying some later or some of the sample ones.
Our FRS is on networked location and uses UNC path - I'm assuming this has no impcat.
Many Thanks

Unknown parameter name 'ENCRYPTION'

Hi All,
I've made a dmp file using expdp for a table containing encrypted coulums.
But when I tried to use ENCRYPTION parameter to enable encryption of data in dump file sets the command pormpt gives this error:
unknown parameter name 'ENCRYPTION'
My DB Version: 10.2.1.0.1

Dev. Musbah wrote:
It stills giving the same error: unknown parameter name 'ENCRYPTION'
Does this parameter can't be used in DB 10g Release 2?Please see the docs or the help with the command. There is no such parameter in data pump.
C:\Documents and Settings\admin>expdp help=y
Export: Release 10.2.0.1.0 - Production on Tuesday, 01 December, 2009 14:02:13
Copyright (c) 2003, 2005, Oracle. All rights reserved.
The Data Pump export utility provides a mechanism for transferring data objects
between Oracle databases. The utility is invoked with the following command:
   Example: expdp scott/tiger DIRECTORY=dmpdir DUMPFILE=scott.dmp
You can control how Export runs by entering the 'expdp' command followed
by various parameters. To specify parameters, you use keywords:
   Format: expdp KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
   Example: expdp scott/tiger DUMPFILE=scott.dmp DIRECTORY=dmpdir SCHEMAS=scott
               or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
USERID must be the first parameter on the command line.
Keyword               Description (Default)
ATTACH                Attach to existing job, e.g. ATTACH [=job name].
COMPRESSION           Reduce size of dumpfile contents where valid
                      keyword values are: (METADATA_ONLY) and NONE.
CONTENT               Specifies data to unload where the valid keywords are:
                      (ALL), DATA_ONLY, and METADATA_ONLY.
DIRECTORY             Directory object to be used for dumpfiles and logfiles.
DUMPFILE              List of destination dump files (expdat.dmp),
                      e.g. DUMPFILE=scott1.dmp, scott2.dmp, dmpdir:scott3.dmp.
ENCRYPTION_PASSWORD   Password key for creating encrypted column data.
ESTIMATE              Calculate job estimates where the valid keywords are:
                      (BLOCKS) and STATISTICS.
ESTIMATE_ONLY         Calculate job estimates without performing the export.
EXCLUDE               Exclude specific object types, e.g. EXCLUDE=TABLE:EMP.
FILESIZE              Specify the size of each dumpfile in units of bytes.
FLASHBACK_SCN         SCN used to set session snapshot back to.
FLASHBACK_TIME        Time used to get the SCN closest to the specified time.
FULL                  Export entire database (N).
HELP                  Display Help messages (N).
INCLUDE               Include specific object types, e.g. INCLUDE=TABLE_DATA.
JOB_NAME              Name of export job to create.
LOGFILE               Log file name (export.log).
NETWORK_LINK          Name of remote database link to the source system.
NOLOGFILE             Do not write logfile (N).
PARALLEL              Change the number of active workers for current job.
PARFILE               Specify parameter file.
QUERY                 Predicate clause used to export a subset of a table.
SAMPLE                Percentage of data to be exported;
SCHEMAS               List of schemas to export (login schema).
STATUS                Frequency (secs) job status is to be monitored where
                      the default (0) will show new status when available.
TABLES                Identifies a list of tables to export - one schema only.
TABLESPACES           Identifies a list of tablespaces to export.
TRANSPORT_FULL_CHECK Verify storage segments of all tables (N).
TRANSPORT_TABLESPACES List of tablespaces from which metadata will be unloaded.
VERSION               Version of objects to export where valid keywords are:
                      (COMPATIBLE), LATEST, or any valid database version.
The following commands are valid while in interactive mode.
Note: abbreviations are allowed
Command               Description
ADD_FILE              Add dumpfile to dumpfile set.
CONTINUE_CLIENT       Return to logging mode. Job will be re-started if idle.
EXIT_CLIENT           Quit client session and leave job running.
FILESIZE              Default filesize (bytes) for subsequent ADD_FILE commands
HELP                  Summarize interactive commands.
KILL_JOB              Detach and delete job.
PARALLEL              Change the number of active workers for current job.
                      PARALLEL=<number of workers>.
START_JOB             Start/resume current job.
STATUS                Frequency (secs) job status is to be monitored where
                      the default (0) will show new status when available.
                      STATUS[=interval]
STOP_JOB              Orderly shutdown of job execution and exits the client.
                      STOP_JOB=IMMEDIATE performs an immediate shutdown of the
                      Data Pump job.And AFAIK= As Far As I Know
http://www.google.co.in/search?rlz=1C1GGLS_en-ININ355IN355&sourceid=chrome&ie=UTF-8&q=afaik
HTH
Aman....

"The task sequence has been suspended. LiteTouch is trying to install applications. This cannot be performed in Windows PE."

MDT 2012 Server is up and running. I mistakenly deleted a Task Sequence step called "Install Application" that I thought was not needed (I know I should have disabled it and tested).
I have a problem now, when I went to image a computer I did not get application list (This used to work before I deleted the above TS step) with items to check and uncheck for installation. "Install Application" TS was readded but now when I try to
image I get this error:
"The task sequence has been suspended. LiteTouch is trying to install applications. This cannot be performed in Windows PE."
I've tried moving it to different positions on the list (Higher and lower) to no avail, I always get the same error. Please advise.
-Thanks in advance!

On the computer you are deploying to "the client", boot into WindowsPE just like you are going to image and before you authenticate or
get any dialogue boxes, press F8 in WindowsPE to get command prompt and type the following:
diskpart
list disk
select disk 0
list part
select part 1
clean
create part primary
assign
active
exit
Please mark this as the answer if it works.
You are awesome this worked for me I didn't see how I was going to get my new computer to reimage again Thank you sooooooooooooo much!!!

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?

I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

Hello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

Error processing cube - requested operation cannot be performed on a file with a user-mapped section open

Hi,
We have recently moved our production servers and since the move have been experiencing an intermittent (but frequent) error when processing our OLAP cube.
The error messages presented are:
"Error: The following error occurred during a file operation: The requested operation cannot be performed on a file with a user-mapped section open"
"Error: Errors in the OLAP storage engine: An error occurred while processing index for the <Partition Name> partition of the <Measure Group Name> measure group of the <Cube Name> cube from the <Database Name> database"
I assume the second message is a consequence of the first error. The partitions and measure groups seem to vary each time the process is run.
It appears from similar threads that this is usually caused by backups or anti-virus applications locking the files that Analysis Services is using the process the cube. I have ensured that there are no backups running at the time of processing and
I have disabled anti-virus programs without success.
I have also created a new version of the cube (using the deployment wizard) which deployed without error but then encountered the same error when processing for a second time. There was nothing (client application wise) using this cube when it failed
to process.
As I mentioned earlier, this problem is intermittent. Sometimes the cube will successfully process but usually it fails to process.
We have not encountered this error in our previous production environment or in any of our development environments.
Has anyone encountered this problem before? Any suggestions on possible solutions?
Thanks
Rich

Hi jonesri,
I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
SELECT[SESSION_COMMAND_COUNT],
[SESSION_CONNECTION_ID],
[SESSION_CPU_TIME_MS],
[SESSION_CURRENT_DATABASE],
[SESSION_ELAPSED_TIME_MS],
[SESSION_ID],
[SESSION_IDLE_TIME_MS],
[SESSION_LAST_COMMAND],
[SESSION_LAST_COMMAND_CPU_TIME_MS],
[SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
[SESSION_LAST_COMMAND_END_TIME],
[SESSION_LAST_COMMAND_START_TIME],
[SESSION_PROPERTIES],[SESSION_READ_KB],
[SESSION_READS],[SESSION_SPID],
[SESSION_START_TIME],[SESSION_STATUS],
[SESSION_USED_MEMORY],
[SESSION_USER_NAME],
[SESSION_WRITE_KB],
[SESSION_WRITES]
FROM $SYSTEM.DISCOVER_SESSIONS
Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
http://msdn.microsoft.com/en-us/library/hh230820.aspx
In addition, you can aslo use SQL Profiler to capture some events for further investigation.
Use SQL Server Profiler to Monitor Analysis Services:
http://technet.microsoft.com/en-us/library/ms174946.aspx
If you have any feedback on our support, please click
here.
Regards,
Regards,
Elvis Long
TechNet Community Support

Unknown parameter PHY_MEMSIZE a check cannot be performed to APP servers

Similar Messages

Maybe you are looking for