Unknown password on intall wizard 8 step

hello i instaled my Wireless-G Broadband Router - WRT54G - 1.1 and on step 8 in install wizard i get this table http://img166.imageshack.us/my.php?image=passei3.jpg i didint found any information about it in manual, what password i should write in? I use adsl modem behind router. I connected cables exactly like wizard said, dsl modem>>router>>pc. i use ppoe, but it is not my internet pass i tried it, i also tryed default linksys pass "admin", please help what password can it be. Thank you for suport.

in true behind router is intracom jetspeed 520 its not only modem its also router, but i use it like modem, what i should set in linksys pppoe settings with user name, pass... or only intracom ip? In install wizard all is automatic so it would be perfect to know what password it wants. Please help. thanks a lot

Similar Messages

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

Invalid or unknown password

hello, i cannot access tzo because of an invalid or unknown password. I am using a wvc80n camera. I have the camera working fine at my store using the wireless here but i want to access it remotely.
Solved!
Go to Solution.

The camera is working fine in the local network.
Open the Internet browser and in the address bar type the IP address of the camera. That will open the setup page of the camera. Click on setup tab and go to ' options '.
You will find ' Alternate Web Access Port '. Enable that option and in the Port number type 1024. Save/Apply the settings.
Now you need to open the port 1024 on your router for the IP address of your camera.
Check the Internet / WAN IP address on your router.
Let's consider the Internet IP address is A.B.C.D ( where A, B, C, D may be any number).
Open the Internet browser and in the address bar type http://A.B.C.D:1024 and you will see your camera on the Internet.
The Internet IP address on your router may change periodically ( depends on ISP)
To use TZO, make sure that your TZO account is setup properly.

Why they deleted my iCloud account? I have an account with yahoo, and removed my account, not reset my password, and do the steps to reset password

Why they deleted my iCloud account? I have an account with yahoo, and removed my account, not reset my password, and do the steps to reset password, when I put my date of birth does not accept, please i need that account, because I have iphone 4 in that account and I can not activate the iphone

Hello Jbug0409,
Welcome to Apple Support Communities.
It sounds like you’re running into an Apple ID password issue on your iPod touch, and you’ve created another account which you weren’t able to verify because you didn’t receive the verification email.
Try resetting the Apple ID password for the account that’s already on your iPod touch as shown here:
If you forgot your Apple ID password - Apple Support
Also, take a look at this article which provides troubleshooting suggestions that’ll resolve most issues receiving verification emails.
If you didn't receive your verification or reset email - Apple Support
So long,
-Jason

RAC (Linux) Security: "Unknown" Passwords for CRS, ASM, Oracle?

We're going through an audit (PCI) and the question of these shared accounts has come up. I do realize that ssh connectivity, with key exchange, is used in the maintenance of Oracle RAC clusters. What I'm thinking/wondering is if it's possible to have an "unknown" password for one or all of these accounts. This would mean that a 'sudo su' would still be allowed to the account if needed, and ssh key exchange would still work, but it would tighten up the security a bit (and make writing compensating controls a lot easier).
I'm wondering if anyone can help identify areas where actually having the crs, asm and oracle passwords will be required in the care and feeding of RAC? Also, or alternately, if someone can point me to the documentation where it shows having the password is a prerequisite, that would make my life a lot easier.
Thanks in advance for any assistance.

Hi,
If I understand your requirement correctly, yes, I believe it's possible.
If you're doing RAC, you must have "user equivalence" (i.e. ssh via password-less key based authentication) set up on all nodes in the cluster. In addition, it's possible to disable password authentication, once you have key authentication set up. Finally, once you're logged in, you still need sudo to work, correct? If password will not be known to you, you can set up sudo to work without a password, (look at NOPASSWD option) but consider that, you really need to set things up correctly, or you may jeopardize your system security.
Ideally, you would:
1.) set up ssh keys with passphrase.
2.) disable password authentication.
3.) set up ssh-agent and authentication forwarding.
I'm not an expert at all, I've just recently been reading up to try to do something similar in my environment.
I found this three-part article that seems to cover the subject pretty thoroughly:
http://www.ibm.com/developerworks/linux/library/l-keyc.html
Hope that helps,
-Mark

4.2.0 version Authoring wizard Step 4 Nullpointer

OHJ4.2.0 version.
Authoring Wizard started. from bin directory
Click to Step 4 of 10.
Add a View.
In the DataLocation, press Browse. now Press Cancel on the FileSelector dialog.
Since the file is Null, it results in nullpointer.
C:\Program Files\ohelp\bin>"C:\Program Files\ohelp\_jvm\bin\java.exe" -classpath
"C:\Program Files\ohelp\help4-wizard.jar;C:\Program Files\ohelp\help4-indexer.j
ar;C:\Program Files\ohelp\help4.jar;C:\Program Files\ohelp\ohj-jewt.jar;C:\Progr
am Files\ohelp\;C:\Program Files\ohelp\oracle_ice5.jar;C:\Program Files\ohelp\wi
zard-ewt.jar" oracle.help.wizard.HelpSetWizard
java.lang.NullPointerException
at java.io.File.<init>(Unknown Source)
at oracle.help.wizard.FilePromptContainer.actionPerformed(Unknown Source
at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
at oracle.ewt.lwAWT.LWButton.processActionEvent(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.button.PushButton.activate(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.proces[i]Long postings are being truncated to ~1 kB at this time.

Thanks for the bug report, I logged it in our bug database.
Jeffrey Stephenson
Oracle Corporation

"System.FormatException: The string was not recognized as a valid DateTime" when running SharePoint Configuration Wizard step 9

Dears,
We have a problem upgrading sharepoint
From: SharePoint 2007 SP2 12.0.0.6535 - April 10 cumulative Update
To: SharePoint 2007 SP2 12.0.6557.5000 - April 11 cumulative Update
We start installing WSS CU in our standalone environment
Then we start running the SharePoint Configuration Wizard and it is failed in step 9 with the following error in "PSCDiagnostics" log:
File reader could not understand line 15679. Line was: 06/26/2011 10:11:35 1 INF Entering function PsconfigLinkLabel.LinkLabelClickedEventHandler. Error was: System.FormatException:
The string was not recognized as a valid DateTime. There is a unknown word starting
at index 24.
at System.DateTimeParse.Parse(String s, DateTimeFormatInfo dtfi, DateTimeStyles styles)
at UlsGump.Column.TimeColumn.ParseTime(StringFacade timeString)
at UlsGump.UlsEntry.SetEntryFromThread(StringFacade[] threadFacades, StringCacheFile stringCacheFile, Int64 messageLocation)
at UlsGump.UlsEntry.ReadFromUlsBuffer(Char[] buffer, Int32 bufferStart, Int32 bufferCount, StringCacheFile stringCacheFile, Int64 fileStart)
at UlsGump.FilePump.ReadJob()
Please help and advise to solve this error in order to get upgrading sharepoint succeed
Regards, Anas N. Alhussein | Sharepoint Senior Developer

Hi,
From your narration, you can clear the configuration cache, then re-run the SharePoint Configuration Wizard, check the effect.
Cleared the cache of config database by following below steps.
1. Stopped the Windows SharePoint Services Timer service.
2. Started on the SharePoint Server where Central Administration Site is hosted. Browse to
C:\Documents and Settings\All Users\Application Data\Microsoft\SharePoint\Config\
3. Deleted all the xml files. (But do not delete the cache.ini file.)
4. Then Edited the cache.ini and replaced the current value with "1".
5. Restarted the Windows SharePoint Services Timer service on the Central Admin server .
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Regards, Rock Wang Microsoft Online Community Support

Payment Wizard - step 6of 9 - recommendation report PLD has no vendor code

Dear all,
Our customer is on SAP2007A SP00 PL41, US localization, SQL2005, no 3rd party add-on
They are using Payment Wizard. On create new >> step 6 of 9, recommendation report, when they tried to print the report, we cannot see vendor code and vendor name. They are blank. We are using the system PLD.
If we just go through the exsiting recommandation, we can have vendor code and vendor name on the report. This only happened when we create new payment.
I can reproduce this in SAP2007 SP01 PL08, CA localization. Is it a bug or a system behavior? Thanks.
Regards,
Yuka

Hi,
Please check the issue in the Demo database on the Latest patch.
I think the customer is doing the Print Preview when the Payment wizard is being run.
Check for the saved recommended run , whether you can get the Print/print preview or not.
Kind Regards,
Jitin
SAP Business One Forum Team

No synchronous Request/Reply option in B2B config wizard step 5 of 7 ?

I have a customer running SOA Suite 11.1.1.5 who has created a BPEL process
and added a B2B partner link to the reference swim lane.
They want to send a 270 document to a partner and receive a 271 on the same HTTP Channel as a Sync Req/Reply
When the customer runs the B2B wizard, it successfully connects to their WLS Server and at
Step 5 of 7 in the wizard they see radio buttons for
o Send
o Receive
They do not have radio buttons further down for
o Synchronous Request/Response
o Outbound
o Inbound
Does anyone have any ideas why not?
I have a sample running on my local server which is also 11.1.1.5 and
the Synchronous Request/Response radio buttons do appear.
thanks
Bob

Bob,
I don't think PS4 (11.1.1.5) has this option available -
http://docs.oracle.com/cd/E21764_01/integration.1111/e10229/intro_ui.htm#CHDEGEEB
Please re-check your local setup version.
Regards,
Anuj

File Adapter Wizard Step 4

I'd like to write out a message variable to a file. When I use the file adapter, the wizard asks for a schema in step 4. There is no xsd schema defined for the message.
I tried using the "Schema is Opaque" checkbox to create the partnerlink but then I get a type mismatch between the message I want to write out and the opaque "Write_msg" of the adapter.
What should I do to write out a message using the file adapter when there is no xsd? How do I get past step 4 in the wizard? Is there an example somewhere?
Thanks,
Bret

Google's wsdl is available for download to the local file system. It's not available dynamically via an API, at least not that I've been able to find. Perhaps because they require you to sign a license agreement checkbox and access via an API would not satisfy their legal department? I guess we need a new WS* specification: WS-Legal or WS-Licensing.
I did create my partner link just as you described. My local file is called GoogleSearch.wsdl and the partner link wizard creates a file called GoogleSearchRef.wsdl. But there is no xsd created.
Maybe the only workaround is to chop the message definition out of the wsdl file and manually create an xsd. But that would be a severe support workload, since Google's wsdl may change from time to time and a new xsd would then have to be generated. Perhaps the process of generating an xsd from a wsdl could be automated. What do you think?
Message was edited by:
Bret

Payment wizard - Step 4

Hi experts. I need a little explanation about the payment wizard tool step 4 of 9.
When i run the wizard to generate incoming payment, after selectin payment type > incoming and payment means > bill of exchange in step 2 of 9, all bp in step 3 of 9, in step 4 of 9 i can select a duedate range and / or number range.
Well... I suppose that the number range is the number of the invoice..
But if i set the number range from invoice number 10 to invoice number 100, wizard load all invoice..Not only the invoice between the range i set.
So... can you explain me how does the number range work in wizard payment?
Thank in advance.

Hi Gordon.. Thank's for your reply..
Sorry, but i can not understand what you menas for "The system will probably compare them by text value instead of number".
My numeration series setting for the invoice are from 11150000 to 11159999. Now the first free number is 1150308.
I would like to run payment wizard from number 11150300 11150307...
But if i set this range number in step 4 of 9 and i go on on wizard, i've all the open invoice selected.. Not only the invoice between 11150300 and 11150307
Thank's

Wizard Step question

Hi,
I am having a wizard in the pop-up, which on first call starts by default with Step 1 and all other subsequent calls start with Step 2. What do I need to do that it always starts with Step 1 and not Step 2?
The default layer setting of the wizard is set to Step 1.
Best regards,
Dharmi

Hi Shai,
I tried what you mentionen, and I get the following error:
The initial exception that caused the request to fail, was: 
 
<div style="font-size:8pt;color:#FF0000">
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Viewmanager for window Generic is already used and must not be used twice at the same time.
</div>
 
 at com.sap.tc.webdynpro.progmodel.window.ViewManager.allocate(ViewManager.java:97) 
 at com.sap.tc.webdynpro.progmodel.window.InterfaceView.manageEmbeddedViewManager(InterfaceView.java:145) 
 at com.sap.tc.webdynpro.progmodel.window.InterfaceView.initController(InterfaceView.java:56) 
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:209) 
 at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:352) 
 ... 57 more 
 
See <a href="#exceptionchain">full exception chain</a> for details.
 
 
Here by the [Screenshot of action - open window|http://img212.imageshack.us/img212/5756/engineactionnv3.jpg] and [Transition|http://img382.imageshack.us/img382/5361/engineaction1el1.jpg]
Best regards,
Dharmi

I forgot my password and follow the steps but my email did not received the reset password email

I forgot my old apple password and I follow the steps for reset my password. But my frustration is when i login my email there was no email on resetting my password.

I've never received reset password emails.
Despite waiting 24hrs (as some forum posts had suggested it takes a bit of time to come through). So I created new account using a new email.
But now I have the same problem on a different account, and still nothing received. I've checked spam folder and email server but nothing is received. Other emails from Apple have been received, when I added voucher and when I registered to this forum.
So if anyone else has found a resolution I would be most interested also.

Used mini mac - unknown password log on - how to reset to base start

used mini mac- unknown log in + password - need to reset to base operation - tried the command-r - got to the utilities screen but the password/log in section would not allow "highlighting" to select.

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Blank screen in intrastat wizard step 5 document overview

Hi,
i have a problem at a customer
filled in all item am bp settings for intrastat en see the correct items with commodity codes and bp with correct details in intrastat wizard. But in the step 5 of the wizard where it should show me the purchase documents i get an blank screen and no data is in the lines???
What is wrong
Mark

Bob,
I don't think PS4 (11.1.1.5) has this option available -
http://docs.oracle.com/cd/E21764_01/integration.1111/e10229/intro_ui.htm#CHDEGEEB
Please re-check your local setup version.
Regards,
Anuj

Unknown password on intall wizard 8 step

Similar Messages

Maybe you are looking for