Unknown reason for loss of mobile connection. No Service message.

Recently my phone randomly loses connection to the network. I get "no service" instead of my mobile phone provider. Tried a restore - new and from backup. Sometimes airport mode resets the connection. Using iOS 4.3.5. On Orange in the UK. Ant ideas?

Wow! Still no reply from Support Team?
I have the same problem.
iPhone 4 (Factory Unlocked) 32 Gb. FW 4.3.5. iTunes 10.4.1 (Mac OS X Lion). System and iTunes are up to date.
My phone just out of the blue lost connection and has been showing No Service. I tried everything (execpt of Service - as I'm in Russia now - we have no official Apple Service). First times connection might appear online for some time, then lost again. Air Plane switching helped intially - then failed to restore network connection. Here starts an interesting thing - when I rebooted iPhone - I found my phone asking me to connect to iTunes (it didn't seem to be a revocery mode - I was able to see network and battery indicators). When I connected it to iTunes - it some times wasn't able to activate my iPhone (due to No Service), some times it saw the phone but failed to recognize it contents and asked to restore. Many times I performed restore procedure. Another interesting thing was - when I've just restored device - it saw network for some time (20-40 min) then lost it. When I rebooted the Phone....behold......it asked me to connect to iTunes once again!!!!! And this repeates all the time. The only way to use it as iPod - restore with iTunes and DO NOT reboot as it requires activation each time I reboot it.
Thus we have a conclusion:
1. iPhone loses network some minutes after compleate restore to factory settings.
2. It restores the connection if one recovers it with iTunes (or resets network settings of complete iPhone erase), but asks to active it.
3. It asks for activation each time the phone was rebooted.
4. It's not a SIM card problem (I've chenged for another micro-SIM - the same). I also tried SIM cards with another phones - work perfectly (and still working).
5. It's not a Firmware problem (initally I had 4.3.3, then upgraded to 4.3.5).
6. It's likely a hardware error as:
6.1 when I've just restored iPhone - it some times showed 'Searching' till the next restore (I was unable to active such phone).
6.2 Some times it couln't find network just after restore - hence it's defenetely not a sync problem (as I thought for the first times).
6.3 Some times iPhone was connected to iTunes just right after restore - it showed 'iTunes can't read iPhone contents - restore...etc.'
6.4 It seems like a bad SIM-card contact, or some failure in Antena Module. Let me explain why: when phone is on (and show No Service) I eject SIM Card - phone didn't show up 'SIM Card Missing' error. There may be a lot of time past before this message shows up. Just to prove I've checked when I had connection - I ejected SIM Card and I got No SIM Card Installed error instantly. Then I inserted card and iPhone found network instantly too.
7. Some times when I connect the phone to iTunes it can't read Capaty! (shows n/a) and says: "iTunes can't read iPhone's contents - please restore...etc.
Hence I made a conclusion that there may be some hardware mailfunctions in antena/GSM/com module (I don't now how it's called). I hope it's just a bad stub connection of the parts or some minor issues in SIM-Socket.
Dear Supprot Team - have you any ideas or have you had such issues solved yet? As I'm in Russia now - I can't take my phone to Apple Service on warranty. And I don't want to pay much money for unofficial service. And of course I don't want to use my iPhone just as iPod (I paid money not for an iPod).
Please also tell me - when iPhone upgrades to new FW - does it erase all the internal drives and flashes new? Or it rewrites only some system drives? Is there any possibilty thet data from previous sync left on iPhone ?
I think there might be some file system mess during incorrect sync (I have no any other explanation on why iTunes some times can't recognize iPhone's contents and asks for restore even if restore just has been done).

Similar Messages

Unknown reason for error code 36331 in DAC run

Hi,
While running full load i am getting following error
Can any one give me the solution
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_123 -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 01:41:19.126 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

HI Srini,
I had copied Src files from BIApps to informatica Src file
While running DAC11g full load, we are en counting some issues below is the error we are facing
ERROR CODE - Unknown reason for error code 36331
one more thing to consider, In DAC10g we give /Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SrcFiles as Informatica parameter path in DAC system properties but in DAC11g if i take same path no task is running, it is failing at first task only and no parameter file is generating.
But if i give dafault in that Informatica parameter path of DAC11g some tasks are running success and i am able to see some parameters generated in DAC PATH, but Default is taking
/Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters path for that location.
Informatica Server details are Success, Physical Data sorce are success.
I had copied SrcFiles and LkpFiles to informatica from BIApps.
ParameterDW and parameterOLTP are moved to /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters as well as Informatica Src folder
for one task below is the error
2013-02-07 21:50:17.515 Acquiring Resources
2013-02-07 21:50:17.517 Acquired Resources
2013-02-07 21:50:17.519 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 21:50:46.989 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

TS3048 My bluetooth mouse usually loss with unknown reasons and it then automatic connected again after some clicks.

Dear Sir or Madam,
I have bough my Macbook Pro since 8 months ago and it seams quite good upto now, however in these days my Bluetooth mouse ussually lossed with unknow reasons and it then automatic connected again after some clicks.
I have check mouse battery as well as relevent reasons like turn-on, but it still repeated and I don't know what is exact problem, it due to my mouse or my mac?
Thank you very much and looking forward to your help.
BR

Check your Bluetooth, do you have a bunch of stuff listed in there that you are no longer using?
Or another peripheral you stored away in a cabinet near by?

Unknown reasons for iView timeout in EP 6.0

Hello,
we have recently developed a HR portal application for appraising employees. It is an application using JSP DynPage,connecting to R3 with JCo. The strangest thing about it, is that it works perfectly well on our DEV EP, however on production portal it doesn't. When user tries to save an appraisal form, we get an error. This happens if time of edition of the form exceeds about one minute. If user saves his appraisal quicker,everything is just ok. We don't have this time restriction on DEV EP. User can save his appraisal even after 20 minutes of edition. We were looking for differences in DEV and PRD portals, and found none, except the number of users. We can't figure out, what may be causing this problem. Any ideas? Please help.
Apr 7, 2006 2:40:39 PM Fatal PRT-Async 5 [async] Exception in PortalRequestManager.dispatchRequest without timeout
java.lang.NullPointerException
     at com.img.polkomtel.hr.AppraisalCard$UsingJSPDynPagePage.doProcessAfterInput(AppraisalCard.java:181)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:91)
     at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:135)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:191)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:384)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:338)
     at com.sapportals.portal.navigation.workAreaiView.doContent(workAreaiView.java:252)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Unknown Source)

Hi Detlev,
I guess the problem boils down to opening a new window in javascript and keeping the session. As I moved all Beans to SessionComponent and thier scope is "session", I can not access them from a new window. This is quite reasonable, but how to walk around ? I tried including the session id in url:
function setTarget(newTarget, newParam, parentRow, who) {
               <% String sessionid = request.getSession().getId(); %>
               var url="<%=selectionBean.componentUrl%>";
               var pageUrl = "<%=selectionBean.pageUrl%>";
               var connected = "<%=selectionBean.connected%>";
if (connected == 'true') {
//                         var val = window.showModalDialog(url+"?JSESSIONID=<%=sessionid%>&param=note", '', 'dialogHeight: 285px; dialogWidth: 230px; edge: Raised; center: Yes; help: No; resizable: No; status: Yes');
                         var wind = window.open(url+"?JSESSIONID=<%=sessionid%>&param=note&parent=" + parentRow + "&who=" + who,"","menubar=0,resizable=0,width=205,height=235,center=1,status=0,scrollbars=0");
                    } else {
//                         var val = window.showModalDialog(url+"?JSESSIONID=<%=sessionid%>&param=note", '', 'dialogHeight: 295px; dialogWidth: 230px; edge: Raised; center: Yes; help: Yes; resizable: No; status: Yes; menubar: Yes');
                         var wind = window.open(url+"?JSESSIONID=<%=sessionid%>&param=note&parent=" + parentRow + "&who=" + who,"","menubar=0,resizable=0,width=205,height=235,center=1,status=0,scrollbars=0");
But it didn't help. I still get a null pointer exception when I open a new window. Any ideas ?
Best Regards,
Piotr

Support for loss of Pandora connection

Pandora app - receiving "Failed to restore an active subscription . . ."

Try resetting (rebooting) the iPhone. If that doesn't help, try removing and reinstalling the Pandora app. If that still doesn't help, you'll probably need to contact Pandora support.
Regards.

What was the reason for disabling the 'Browse by name' service in Firefox 4 & 5 ?

It worked in Firefox 3. How do you enable the British version ie '.co.uk' ?

You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.co.uk/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.co.uk/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

Reason for Rejection

Hi ,
The Sales order is created and the PR is generated and Based on PR, purchase order is created. The Inbound delivery and GR is done and the stocks is in Sales order Stock.
By Mistake User puts a Reason for Rejection for the Line item and system accepts it without showing any error message.
This needs to be corrected

Hi Akash A,
This is std system behaviour to allow the Reason for rejection. But system issues warning message before you set the reason for rejection. Have tested the same & system triggered below message in sequence.
Message no. V1036
Message no. V1775
Message no. V1544
Message no. V1579, Then able to save the document with reason for rejection ( code:00)
in VA02,- when i was trying to remove the reason for rejection,system didnt allow to do so & issued below error message
Message no. V1597.
This is because,
Eg: MTO- scenario, flow is like
MTO - PR - PO - IBD- MIGO, then stock in inventory against SO.
In this stage, if customer cancels the Order, you cant cancel the delivery, you have only option to set the delivery / billing block. but still system shows this order in "Incomplete order list" To avoid this,
you set the reason for rejection & status will get updated as "Complete".
If you dont want to do so, you have to fine tune system or Dont give option to the user to view this tab or field.
Regards,
Reazuddin MD

Error while giving Reason for Rejection

Dear Gurus,
When I want to close a Sales Order by giving a Reason for Rejection, system is giving an Error message as 'V1:901' and there is no explanation for it. Even in SE91 there is no entry for this error message.
What is to be done now?
Kindly help me in this.
Thanks and regards.
Venkat - Hyd

When I checked to see the program ZV45AIZZ, system says it does not exist. Is this an own developed 'Z' program??
Normally the error message V1:901 does not come for me too, but for some Sales Orders it is coming, which I am seeing for the first time too!! So do not know why it is happening.
There are no user exits for this line item and as I said there is no message explanation for this error message.
Yes there are some subsequent documents in some cases, but I am trying to close all open Sales Orders / line items for the last financial year as that is an Audit point in our company, I cannot close / delet them under any circumstances, just need to close open line items.
Any more inputs plz..
Regards.
Venkat - Hyd
PS: Plz tell me, what are the dangers of leaving open Sales Orders or partially processed Sales Orders, i.e., open line items?? Do we have to close them compulsarily??

PI/XI: "HTTP client. Code 110 reason" for XML PO transmission

PI gurus,
We use XI to convert PO IDOC to XML message and send the XML message to our vendors.
We got the error message "HTTP client. Code 110 reason" for two POs while other POs went to the same vendor successfully.
We also have no problem for sending XML POs to other vendors.
Is this error caused from the sender or the receiver and how can I fix the problem?
Thanks in advance!
Fisher

Hi,
Below link will help
HTTP client code 110 reason
For reference check the below links too
Message not reaching Integration server
HTTPS Receiver Adapter with POST and query String

Error in phase: DISASSEMBLE Reason for error: PATCH_FILE_READ_ERROR

Hello All
I am applying support Package: SAPKB70009 on SAP ECC 6.0 for component SAP_BASIS with release 700.
I am getting following error
The import was stopped, since an error occurred during the phase
DISASSEMBLE, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: DISASSEMBLE
     -   Reason for error: PATCH_FILE_READ_ERROR
     -   Return code: 12
     -   Error message: OCS Package: SAPKB70009
Guys can you please shed some light on how to solve this issue.

Hi,
There might be 2 reaons for the error.
1) corrupted files in EPS/in or improper CAR of the files.
2) the file permissions in EPS/in check whether the files are having proper permssions like 775 with owner <SID>adm
-Srini

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes.

I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

Firefox Displays "Peer's certificate has an invalid signature." SubCA shows "Could not trust this certificate for unknown reasons"

Using a 2-tier on-premise PKI. Offline Root CA (Standalone Windows 2008 R2 Enterprise) and online SubCA for issuing certificates (Domain-Joined Issuing CA)
ROOTCA certificate installed in the store and showing trusted (Uses a SHA2 signature and PKCS #1 SHA-256 With RSA Encryption algorithm)
ISSUINGCA certificate installed in the store and showing "Could not trust for unknown reasons" also has SHA2 signature with RSASSA-PSS algorithm
Issued certificate is for a Lync Front-End Web Server and when attempts are made to load the secure web connection. I receive the error "Peer's certificate has an invalid signature"
I've completely de-installed and re-installed Firefox. Removed and re-added the ROOT and SUBCA certs. Note: No issues when using same certs in Internet Explorer 8, 9 or 10 on the same system. Lync client also using same certificates, no issues. Only when accessing the Lync Web Services from Firefox.
Question: Does Firefox NSS Internal PCKS#11 Module support RSASSA-PSS SHA-256 with different hashes? How can I troubleshoot this further?

HI khetheri,
In order to better test the certificate may we request the certificate without the private keys? I have some backup from the security team if this is possible.
There is a temporary work around as well but I don't recommend turning on all certificates to make sure it is not a compatibility error(ish)
It is possible to check if it is being detected as a bad certificate in Firefox itself to eliminate compatibility issues.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Search for '''browser.xul.error_pages.expert_bad_cert ''' and set it to true to try the certificate normally.
Looking forward to your reply!

Firefox crashes for unknown reason lately, so I removed it and reinstalled it. How can I put my Favorites (bookmarks) back into the newly installed FireFox???

Firefox crashes a few times when I was on Facebook and with email, also watching dramas online. Most of the time due to Adobe Flash and I did submit crash report. Later it crashes for unknown reason while I have email and Facebook on different tabs -- when I was on the tab of email, it looks system hang and not responding. This happened to my laptop that uses Windows Vista as I noticed. I don't remember it ever happens to my desktop that uses Windows XP.
It's pretty annoying of such known crash, but before removing Firefox, I did try to update all add-ons or plugins and it looks like doesn't work out. After updating for couple times and it still crashed like that, I removed Firefox and reinstall it.
'''Now I want to know how to put the shortcuts from my Favorite folder into the newly installed FireFox's bookmarks.''' I didn't backup the bookmarks by using Firefox. I even went to Firefox help for instructions, but it only mentions how to merge/input the bookmarks from other browsers. Please note the version I've removed and inrestalled is the same -- 3.6.13.

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

HT1311 For some unknown reason I have two Apple ID/Accounts in operation which is causing an issue. How do I completely delete one of these Accounts?

For some unknown reason I have two Apple ITunes/ID Accounts in operation.
How do I completely delete one of these Accounts?

I have a similar situation.. in my case, I started using an Apple ID a while back, then when MobileMe was introduced, I got an account there, and somehow that is the account that is mostly used when making updates or purchases.
Sometimes when making updates, it prompts me for the PW for one account, and sometimes for the other.
This is a real pain - is there anyway both these accounts can be consolidated into one? When I asked an Apple rep, I was told 'no', but they have been known to make mistakes when giving advice. So, is there a way? Technically, I don't see this as a problem.. but Apple seems to be of the opinion that this would lead to having apps 'shared' amoung users. I think all that would be necessary if for me to provide the necessary proof that both accounts are indeed mine, and not belonging to someone else.
If not, what about deleting the apps registered to one account, and then re-purchasing them with the other account? To do this, I would need to identify which apps are registered to which accouts - is this possible? Most of my apps are free, but there are a few I paid for.. not many, so this possible solution might work and not cost too much. Ideas?

HT4356 I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer avail

I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer available. My MacBook continues to print ok. Any ideas?

Reboot everything. Router, printer and pad. If it used to work, it will again. It just lost itself somewhere.

Unknown reason for loss of mobile connection. No Service message.

Similar Messages

Maybe you are looking for