Unknown running message about NuDAQmx Assistant

Hello All,
I got some problem about operate NI's USB DAQ 6009.
After I create a new VI with NuDAQ max item to get a DAQ Assistant block diagram.
I just go ahead to double-click the DAQ Assistant icon,
However, It seem suffer some unknown problem, then a messagebox illustration as follows:
=START=
Unable to locate the LabVIEW Run-Time Engine.
LVBrokerAux71 requires a version 7.1 (or compatible) LabVIEW Run-Time Engine.
Please contact the vendor of LVBrokerAux71 to correct this problem.
=END=
I try to check my add/remove tool in MSXP, there are both NI LabVIEW Run-Rime Engine 7.0 and 7.1
installed well. I try to reinstall the LabVIEW 7.1, but it does not work.
What the possible reasones about this? it is really annonying...
by the way,
I got some other program about these,
  NI DAQ 7.2, traditional
  NI DAQmx 7.3
  NI DAQmx Base 1.4, and so on...
Much thanks,
nonomiya

Hi nonomiya,
seems that someone else got this message. Check out this: http://forumstage.ni.com/ni/board/message?board.id=170&message.id=102465
May be can be useful.
Paolo
Paolo
LV 7.0, 7.1, 8.0.1, 2011

Similar Messages

  • Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following i

    Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following.  When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer.  It did get progressively worse though, at first it crashed not that often and then got worse.  So restores are failing, recovery, everything.  Anyone run into this? 
    11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
    2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
    2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
    2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
    2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
    2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
    2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
    2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
    2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
    2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
    2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
    2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
    2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
    2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c    bug type 110
    incident identifier  8ff84a87

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • My elements 9 and 13 are giving me an unknown error message when I try to publish or share a finished project.

    I have a finished project that I want converted to AVI or downloaded on DVD. My elements 9 would just shut down when I attempted this so I upgraded to elements 13 in hopes this error would be fixed. In 13 I get an unknown error message and then it shuts down. I need serious help.

    connermac8
    Important. This is not Adobe. Rather user to user. So, we have no control over or insider contact with Adobe on how it deals with its products or support for them.
    We are fairly successful in what we do to share our work with others. If you wish to continue here, we are glad for the opportunity to be of assistance.
    If moving forward...mini test run....
    1. Move your source file which you describe as AVCHD.mts to a Local Disc C location like Video.
    2. Open a new project to the Expert workspace, and import that AVCHD.mts file into the project with the project's Add Media/Files and Folders. When the video is
    in Project Assets, drag it to the Timeline Video Track 1 and Audio Track 1. Is there an orange line over that content or no colored line?
    3. Up to this point, have you gotten any Unknown Error message(s)?
    If you are OK up to this point, I will ask for more details to fine tune the project settings. What I am presently not on firm ground with is the details of what you are trying to
    import. In one instance you talk about AVCHD.mts file as the source and in another instance you talk about converting a project to .avi or a burn to disc product.
    I am not 100% sure if you mean video file (likeAVCHD.mts) when you write project (meaning to me project file..prel). The difference would affect the troubleshooting plan.
    Please review and consider. We need to be firm on the properties of what you are trying to import and from where in order to gain success. So, that is why I do not want to take
    anything for granted.
    Thanks.
    ATR

  • ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?

    iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?
    Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

    Thanks for the suggestion kcell. I've tried both versions
    9.0.115 and 9.0.124 and both fail with the policy permission error.
    I also tried with and without your crossdomain.xml file but
    with the same result. It looks like this file is intended for URL
    policy, instead of socket policy. Recently Adobe separated the two.
    When I run with the files installed on my dev PC, it does
    work, which makes sense because the flash player isn't loaded from
    an unknown domain.
    I did get one step closer. If a crossdomain.xml in the server
    root exists and the socketpolicy file is loaded from the app folder
    then the first two warnings disappear. The logs now show:
    OK: Root-level SWF loaded:
    https://192.168.2.5/trunk/myapp.swf
    OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
    OK: Policy file accepted:
    https://192.168.2.5/trunk/socketpolicy.xml
    Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
    seconds) while waiting for socket policy file. This should not
    cause any problems, but see
    http://www.adobe.com/go/strict_policy_files
    for an explanation.
    Warning: [strict] Ignoring policy file with incorrect syntax:
    xmlsocket://192.168.2.5:993
    Error: Request for resource at xmlsocket://192.168.2.5:993 by
    requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
    lack of policy file permissions.
    Which basically says, everything is okay, but you stay out
    anyway.
    PS: I found the XML schema files here:
    http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
    and the socket policy schema:
    http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
    UPDATE: When serving up the policy file on port 843 using the
    example perl script then the socket connection seems to be accepted
    and the connect succeeds. After that flex hangs trying to logon to
    the IMAP server.

  • Unknown Error Message when creating Visual Reports

    I get the Unknown error message periodically when trying to create an excel cash flow report. I am running Excel 2010, and Project 2010.
    Very frustrating

    Hi Jim,
    Are you able to view other reports without any issues.
    Is the happening only on this project?
    Also, Please let me know the project professional patch.
    Thanks,
    Phani

  • I am getting unknown error message (0xE00002BC) when I try to sync my shuffle to my macbook pro.  Any suggestions?

    I have tried to sync my shuffle to my macbook pro.  But I keep getting the unknown error message above.  All I want to do is import the playlist so I can get my new iPod up and running.  Any suggestions?

    Maybe a more appropriate place to post
    iTunes
    And if you want to discuss your MBP:
    MacBook Pro

  • Tour Smartphone 9630 not synching. Getting "unknown error message"

    After 6 months of no problems, I am now unable to sync my Blackberry to my computer. I am getting an "unknown error message" what's going on?

    Hi and Welcome to the Forums!
    "Unknown" -- that is what is going on.
    But seriously folks...that error is one of the hardest to diagnose...so here's what I suggest:
    I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    3) Get a fresh download of the RIM DTM software:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • On My Mac Pro Getting an unknown error message when trying to update apps

    On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

    Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
    Settings>Store>Apple ID - tap your ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sign in again -Settings>Store>Apple ID - sign in.
    If that doesn't work either, reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • TS3219 Is anyone receiving a "unknown error" message when updating/getting new apps?

    Before and after installing the new update I started receiving an "unknown error" message when trying to update apps. I changed my password thinking that was it but I am still getting the error message.

    Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
    Settings>Store>Apple ID - tap your ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sign in again -Settings>Store>Apple ID - sign in.
    If that doesn't work either, reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I;m no longer able to use the Penn State ANGEL system (I teach on line) for my email and intead get messages about "script" problems.

    Question
    I'm no longer able to use the Penn State ANGEL system (I teach on line) for my email and instead get messages about "script" problems

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
    Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
    They will respond either by phone or e-mail within 5-6 working days.
    Please use the tracked e-mail, to reply, not via the forum. Thanks
    This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
    When you submit the form, you will receive an enquiry number, so please keep a note of it
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Cannot update my iPad2 to 5.1 An unknown error message cancels the download process. Could you please inform me how to fix this issue? Thanks!

    Cannot update my jail broken iPad2 & iPhone 4S to 5.1
    An unknown error message cancels the download process. Could you please inform me how to fix this issue? What is also odd is the fact that the update through iTunes is substantially bigger than downloading it directly OTA, although both methods have been unsuccessful so far...
    Thanks!

    About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
    Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

  • What to do when you get an error message about data execution prevention

    i have windowsXP and i downloaded Itunes now that i try to open itunes i'm getting an error message about Data Execution Prevention. Please let me know what to do to be able to open itunes...

    You came from the correct article. Here is what it has to say about that error.
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Unknown Error message on the App Store

    I keep getting an Unknown Error message each time I try to update my apps on the App Store. Please help.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

    Hi
    i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

    Hello there ypda75,
    I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899.
    If you are unable to send or receive email, try the following steps:
    Restart the iOS device.
    Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
    Try an alternative Internet connection.
    If your email is provided by your Internet provider, try connecting from the home network.
    If your iOS device has an active cellular data plan, try to disable Wi-Fi:  Tap Settings > Wi-Fi and turn off Wi-Fi.
    If not, try a different Wi-Fi network.
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
    If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
    All the very best,
    Sterling

  • I ran the update and then firefox stopped working completely ggot a message about .dll that won't work with windows. tried toreinstall new copy of latest but they won't.

    I just ran the update to .4 as the dialog box said to. Now firefox won't work at all. Nothing happens I get a message about a .dll file that is incompatible. Tried to doanload a new copy but that doesn't get any further starting to extract files then it fails to finish. Any thing I can do or have I lost evrery thing including my bookmarked sites?
    == This happened ==
    Every time Firefox opened
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SIMBAR={7B37EC33-AF75-48D2-9930-4E9EF2ABA545}; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

    Thank you,
    Morbus! It worked like you said. Anyway I think the problem starts with maybe needing to completely clean up my OS and drives as they keep "filling up" real fast - much faster than my usage. Uninstall wouldn't work so I just oened up programs and fond the .exe and then deleted it. Scary moment as I really have seen others so mess up everything doing this but download went well of new copy and yes I have all my bookmarks and settings. YAYS!! so thank you again. Also running so much faster and no glitches like tabs not working th way they should. In end I think I need to get an upgrade from Vista home basic. and just then add my files one at a time to see how all goes.

Maybe you are looking for